Provided by: can-utils_2018.02.0-1_amd64
NAME
cansniffer - manual page for cansniffer 2018.02.0-1
SYNOPSIS
cansniffer [can-interface]
OPTIONS
-m <mask> (initial FILTER default 0x00000000) -v <value> (initial FILTER default 0x00000000) -q (quiet - all IDs deactivated) -r <name> (read sniffset.name from file) -b (start with binary mode) -B (start with binary mode with gap - exceeds 80 chars!) -c (color changes) -f (filter on CAN-ID only) -t <time> (timeout for ID display [x10ms] default: 500, 0 = OFF) -h <time> (hold marker on changes [x10ms] default: 100) -l <time> (loop time (display) [x10ms] default: 20) Use interface name 'any' to receive from all can-interfaces. commands that can be entered at runtime: q<ENTER> - quit b<ENTER> - toggle binary / HEX-ASCII output B<ENTER> - toggle binary with gap / HEX-ASCII output (exceeds 80 chars!) c<ENTER> - toggle color mode #<ENTER> - notch currently marked/changed bits (can be used repeatedly) *<ENTER> - clear notched marked rMYNAME<ENTER> - read settings file (filter/notch) wMYNAME<ENTER> - write settings file (filter/notch) +FILTER<ENTER> - add CAN-IDs to sniff -FILTER<ENTER> - remove CAN-IDs to sniff FILTER can be a single CAN-ID or a CAN-ID/Bitmask: +1F5<ENTER> - add CAN-ID 0x1F5 -42E<ENTER> - remove CAN-ID 0x42E -42E7FF<ENTER> - remove CAN-ID 0x42E (using Bitmask) -500700<ENTER> - remove CAN-IDs 0x500 - 0x5FF +400600<ENTER> - add CAN-IDs 0x400 - 0x5FF +000000<ENTER> - add all CAN-IDs -000000<ENTER> - remove all CAN-IDs if (id & filter) == (sniff-id & filter) the action (+/-) is performed, which is quite easy when the filter is 000