Ubuntu Manpage: ipa-replica-manage - Manage an IPA replica

Provided by: freeipa-server_4.7.0~pre1+git20180411-2ubuntu2_amd64

NAME

       ipa-replica-manage - Manage an IPA replica

SYNOPSIS

       ipa-replica-manage [OPTION]... [COMMAND]

DESCRIPTION

Manages the replication agreements of an IPA server.

To manage IPA replication agreements in a domain at domain level 1, use IPA CLI or Web UI,
see `ipa help topology` for additional information.

The available commands are:

connect [SERVER_A] <SERVER_B>
- Adds a new replication agreement between SERVER_A/localhost and SERVER_B. At
domain level 1 applicable only for winsync agreements.

disconnect [SERVER_A] <SERVER_B>
- Removes a replication agreement between SERVER_A/localhost and SERVER_B. At
domain level 1 applicable only for winsync agreements.

del <SERVER>
- Removes all replication agreements and data about SERVER. At domain level 1 it
removes data and agreements for both suffixes - domain and ca.

list [SERVER]
- Lists all the servers or the list of agreements of SERVER

re-initialize
- Forces a full re-initialization of the IPA server retrieving data from the server
specified with the --from option

force-sync
- Immediately flush any data to be replicated from a server specified with the
--from option

list-ruv
- List the replication IDs on this server.

clean-ruv [REPLICATION_ID]
- Run the CLEANALLRUV task to remove a replication ID.

clean-dangling-ruv
- Cleans all RUVs and CS-RUVs that are left in the system from uninstalled
replicas.

abort-clean-ruv [REPLICATION_ID]
- Abort a running CLEANALLRUV task. With --force option the task does not wait for
all the replica servers to have been sent the abort task, or be online, before
completing.

list-clean-ruv
- List all running CLEANALLRUV and abort CLEANALLRUV tasks.

dnarange-show [SERVER]
- List the DNA ranges

dnarange-set SERVER START-END
- Set the DNA range on a master

dnanextrange-show [SERVER]
- List the next DNA ranges

dnanextrange-set SERVER START-END
- Set the DNA next range on a master

The connect and disconnect options are used to manage the replication topology. When a
replica is created it is only connected with the master that created it. The connect
option may be used to connect it to other existing replicas.

The disconnect option cannot be used to remove the last link of a replica. To remove a
replica from the topology use the del option.

If a replica is deleted and then re-added within a short time-frame then the 389-ds
instance on the master that created it should be restarted before re-installing the
replica. The master will have the old service principals cached which will cause
replication to fail.

Each IPA master server has a unique replication ID. This ID is used by 389-ds-base when
storing information about replication status. The output consists of the masters and their
respective replication ID. See clean-ruv

When a master is removed, all other masters need to remove its replication ID from the
list of masters. Normally this occurs automatically when a master is deleted with
ipa-replica-manage. If one or more masters was down or unreachable when ipa-replica-manage
was executed then this replica ID may still exist. The clean-ruv command may be used to
clean up an unused replication ID.

NOTE: clean-ruv is VERY DANGEROUS. Execution against the wrong replication ID can result
in inconsistent data on that master. The master should be re-initialized from another if
this happens.

The replication topology is examined when a master is deleted and will attempt to prevent
a master from being orphaned. For example, if your topology is A <-> B <-> C and you
attempt to delete master B it will fail because that would leave masters and A and C
orphaned.

The list of masters is stored in cn=masters,cn=ipa,cn=etc,dc=example,dc=com. This should
be cleaned up automatically when a master is deleted. If it occurs that you have deleted
the master and all the agreements but these entries still exist then you will not be able
to re-install IPA on it, the installation will fail with:

An IPA master host cannot be deleted or disabled using standard commands (host-del, for
example).

An orphaned master may be cleaned up using the del directive with the --cleanup option.
This will remove the entries from cn=masters,cn=ipa,cn=etc that otherwise prevent host-del
from working, its dna profile, s4u2proxy configuration, service principals and remove it
from the default DUA profile defaultServerList.

OPTIONS

-H HOST, --host=HOST
The IPA server to manage. The default is the machine on which the command is run
Not honoured by the re-initialize command.

-p DM_PASSWORD, --password=DM_PASSWORD
The Directory Manager password to use for authentication

-v, --verbose
Provide additional information

-f, --force
Ignore some types of errors, don't prompt when deleting a master

-c, --cleanup
When deleting a master with the --force flag, remove leftover references to an
already deleted master.

--no-lookup
Do not perform DNS lookup checks.

--binddn=ADMIN_DN
Bind DN to use with remote server (default is cn=Directory Manager) - Be careful to
quote this value on the command line

--bindpw=ADMIN_PWD
Password for Bind DN to use with remote server (default is the DM_PASSWORD above)

--winsync
Specifies to create/use a Windows Sync Agreement

--cacert=/path/to/cacertfile
Full path and filename of CA certificate to use with TLS/SSL to the remote server -
this CA certificate will be installed in the directory server's certificate
database

--win-subtree=cn=Users,dc=example,dc=com
DN of Windows subtree containing the users you want to sync (default
cn=Users,<domain suffix> - this is typically what Windows AD uses as the default
value) - Be careful to quote this value on the command line

--passsync=PASSSYNC_PWD
Password for the IPA system user used by the Windows PassSync plugin to synchronize
passwords. Required when using --winsync. This does not mean you have to use the
PassSync service.

--from=SERVER
The server to pull the data from, used by the re-initialize and force-sync
commands.

RANGES
IPA uses the 389-ds Distributed Numeric Assignment (DNA) Plugin to allocate POSIX
ids for users and groups. A range is created when IPA is installed and half the
range is assigned to the first IPA master for the purposes of allocation.

New IPA masters do not automatically get a DNA range assignment. A range assignment is
done only when a user or POSIX group is added on that master.

The DNA plugin also supports an "on-deck" or next range configuration. When the primary
range is exhaused, rather than going to another master to ask for more, it will use its
on-deck range if one is defined. Each master can have only one range and one on-deck range
defined.

When a master is removed an attempt is made to save its DNA range(s) onto another master
in its on-deck range. IPA will not attempt to extend or merge ranges. If there are no
available on-deck range slots then this is reported to the user. The range is effectively
lost unless it is manually merged into the range of another master.

The DNA range and on-deck (next) values can be managed using the dnarange-set and
dnanextrange-set commands. The rules for managing these ranges are:
- The range must be completely contained within a local range as defined by the ipa
idrange command.

- The range cannot overlap the DNA range or on-deck range on another IPA master.

- The range cannot overlap the ID range of an AD Trust.

- The primary DNA range cannot be removed.

- An on-deck range range can be removed by setting it to 0-0. The assumption is
that the range will be manually moved or merged elsewhere.

The range and next range of a specific master can be displayed by passing the FQDN of that
master to the dnarange-show or dnanextrange-show command.

Performing range changes as a delegated administrator (e.g. not using the Directory
Manager password) requires additional 389-ds ACIs. These are installed in upgraded masters
but not existing ones. The changes are made in cn=config which is not replicated. The
result is that DNA ranges cannot be managed on non-upgraded masters as a delegated
administrator.

EXAMPLES

       List all masters:
               # ipa-replica-manage list
               srv1.example.com: master
               srv2.example.com: master
               srv3.example.com: master
               srv4.example.com: master

       List a server's replication agreements.
               # ipa-replica-manage list srv1.example.com
               srv2.example.com: replica
               srv3.example.com: replica

       Re-initialize a replica:
               # ipa-replica-manage re-initialize --from srv2.example.com

              This  will  re-initialize  the  data  on  the server where you execute the command,
              retrieving the data from the srv2.example.com replica

       Add a new replication agreement:
               # ipa-replica-manage connect srv2.example.com srv4.example.com

       Remove an existing replication agreement:
               # ipa-replica-manage disconnect srv1.example.com srv3.example.com

       Completely remove a replica:
               # ipa-replica-manage del srv4.example.com

       Using connect/disconnect you can manage the replication topology.

       List the replication IDs in use:
               # ipa-replica-manage list-ruv
               Replica Update Vectors:
                   srv1.example.com:389: 7
                   srv2.example.com:389: 4
               Certificate Server Replica Update Vectors:
                   srv1.example.com:389: 9

       Remove references to an orphaned and deleted master:
               # ipa-replica-manage del --force --cleanup master.example.com

WINSYNC

Creating a Windows AD Synchronization agreement is similar to creating an IPA replication
agreement, there are just a couple of extra steps.

A special user entry is created for the PassSync service. The DN of this entry is
uid=passsync,cn=sysaccounts,cn=etc,<basedn>. You are not required to use PassSync to use a
Windows synchronization agreement but setting a password for the user is required.

The following examples use the AD administrator account as the synchronization user. This
is not mandatory but the user must have read-access to the subtree.

1. Transfer the base64-encoded Windows AD CA Certificate to your IPA Server

2. Remove any existing kerberos credentials
# kdestroy

3. Add the winsync replication agreement
# ipa-replica-manage connect --winsync --passsync=<bindpwd_for_syncuser_that
will_be_used_for_agreement> --cacert=/path/to/adscacert/WIN-CA.cer --binddn
"cn=administrator,cn=users,dc=ad,dc=example,dc=com" --bindpw
<ads_administrator_password> -v <adserver.fqdn>

You will be prompted to supply the Directory Manager's password.

Create a winsync replication agreement:

# ipa-replica-manage connect --winsync --passsync=MySecret
--cacert=/root/WIN-CA.cer --binddn
"cn=administrator,cn=users,dc=ad,dc=example,dc=com" --bindpw MySecret -v
windows.ad.example.com

Remove a winsync replication agreement:
# ipa-replica-manage disconnect windows.ad.example.com

PASSSYNC

       PassSync is a Windows service that runs on AD Domain  Controllers  to  intercept  password
       changes.  It  sends these password changes to the IPA LDAP server over TLS. These password
       changes bypass normal IPA password  policy  settings  and  the  password  is  not  set  to
       immediately  expire.  This  is because by the time IPA receives the password change it has
       already been accepted by AD so it is too late to reject it.

       IPA maintains a list of DNs that are exempt from password policy. A special user is  added
       automatically  when  a  winsync  replication  agreement is created. The DN of this user is
       added   to   the   exemption   list   stored   in   passSyncManagersDNs   in   the   entry
       cn=ipa_pwd_extop,cn=plugins,cn=config.

EXIT STATUS

       0 if the command was successful

       1 if an error occurred