Provided by: latexmk_4.41-1_all 
NAME
latexmk - generate LaTeX document
SYNOPSIS
latexmk [options] [file ...]
DESCRIPTION
Latexmk completely automates the process of compiling a LaTeX document. Essentially, it is like a
specialized relative of the general make utility, but one which determines dependencies automatically and
has some other very useful features. In its basic mode of operation latexmk is given the name of the
primary source file for a document, and it issues the appropriate sequence of commands to generate a
.dvi, .ps, .pdf and/or hardcopy version of the document.
By default latexmk will run the commands necessary to generate a .dvi file.
Latexmk can also be set to run continuously with a suitable previewer. In that case the latex program
(or one of its relatives), etc, are rerun whenever one of the source files is modified, and the previewer
automatically updates the on-screen view of the compiled document.
Latexmk determines which are the source files by examining the log file. (Optionally, it also examines
the list of input and output files generated by the -recorder option of modern versions of latex (and
pdflatex, xelatex, lualatex, etc). See the documentation for the -recorder option of latexmk below.)
When latexmk is run, it examines properties of the source files, and if any have been changed since the
last document generation, latexmk will run the various LaTeX processing programs as necessary. In
particular, it will repeat the run of latex (or a related program)) often enough to resolve all cross
references; depending on the macro packages used. With some macro packages and document classes, four,
or even more, runs may be needed. If necessary, latexmk will also run bibtex, biber, and/or makeindex.
In addition, latexmk can be configured to generate other necessary files. For example, from an updated
figure file it can automatically generate a file in encapsulated postscript or another suitable format
for reading by LaTeX.
Latexmk has two different previewing options. In the simple -pv option, a dvi, postscript or pdf
previewer is automatically run after generating the dvi, postscript or pdf version of the document. The
type of file to view is selected according to configuration settings and command line options.
The second previewing option is the powerful -pvc option (mnemonic: "preview continuously"). In this
case, latexmk runs continuously, regularly monitoring all the source files to see if any have changed.
Every time a change is detected, latexmk runs all the programs necessary to generate a new version of the
document. A good previewer (like gv) will then automatically update its display. Thus the user can
simply edit a file and, when the changes are written to disk, latexmk completely automates the cycle of
updating the .dvi (and possibly the .ps and .pdf) file, and refreshing the previewer's display. It's not
quite WYSIWYG, but usefully close.
For other previewers, the user may have to manually make the previewer update its display, which can be
(some versions of xdvi and gsview) as simple as forcing a redraw of its display.
Latexmk has the ability to print a banner in gray diagonally across each page when making the postscript
file. It can also, if needed, call an external program to do other postprocessing on generated dvi and
postscript files. (See the options -dF and -pF, and the documentation for the $dvi_filter and $ps_filter
configuration variables.) These capabilities are leftover from older versions of latexmk. More
flexibility can be obtained in current versions, since the command strings for running latex, pdflatex,
etc can now be configured to run multiple commands. This also extends the possibility of postprocessing
generated files to pdf files. files.
Latexmk is highly configurable, both from the command line and in configuration files, so that it can
accommodate a wide variety of user needs and system configurations. Default values are set according to
the operating system, so latexmk often works without special configuration on MS-Windows, cygwin, Linux,
OS-X, and other UNIX systems (notably Solaris).
A very annoying complication handled very reliably by latexmk, is that LaTeX is a multiple pass system.
On each run, LaTeX reads in information generated on a previous run, for things like cross referencing
and indexing. In the simplest cases, a second run of LaTeX suffices, and often the log file contains a
message about the need for another pass. However, there is a wide variety of add-on macro packages to
LaTeX, with a variety of behaviors. The result is to break simple-minded determinations of how many runs
are needed and of which programs. In its new version, latexmk has a highly general and efficient
solution to these issues. The solution involves retaining between runs information on the source files,
and a symptom is that latexmk generates an extra file (with extension .fdb_latexmk, by default) that
contains the source file information.
LATEXMK OPTIONS AND ARGUMENTS ON COMMAND LINE
In general the command line to invoke latexmk has the form
latexmk [options] [file]
All options can be introduced by single or double "-" characters, e.g., "latexmk -help" or "latexmk
--help".
Note 1: In addition to the options in the list below, latexmk recognizes almost all the options
recognized by the latex, pdflatex programs (and their relatives) in their current TeXLive and MiKTeX
implementations. Some of the options for these programs also trigger special action or behavior by
latexmk, in which case they have specific explanations in this document. Otherwise, they are just passed
through to a called latex or pdflatex program. Run latexmk with the -showextraoptions to get a list of
the options that latexmk accepts and that are simply passed through to latex or pdflatex (etc). See also
the explanation of the -showextraoptions option for more information.
Note 2: In this documentation, the program pdflatex is often referred to. Users of programs like
lualatex and xelatex should know that from latexmk's point of view, these other programs behave like
pdflatex, i.e., they make a pdf file from a tex file, etc. So whenever pdflatex is mentioned without
mention of the other programs, the statements apply equally to lualatex, xelatex, and any other similar
programs. Latexmk can be easily configured to use whichever of these programs is needed. See the
documentation for the following options: -pdflatex="COMMAND", -lualatex, and -xelatex, and also see the
documentation for the $pdflatex configuration variable. At present latexmk cannot do automatic detection
of which program is to be used.
Definitions of options and arguments
file One or more files can be specified. If no files are specified, latexmk will, by default, run on
all files in the current working directory with a ".tex" extension. This behavior can be changed:
see the description concerning the @default_files variable in the section "List of configuration
variables usable in initialization files".
If a file is specified without an extension, then the ".tex" extension is automatically added, just as
LaTeX does. Thus, if you specify:
latexmk foo
then latexmk will operate on the file "foo.tex".
-auxdir=FOO or -aux-directory=FOO
Sets the directory for auxiliary output files of (pdf)latex (.aux, .log etc). This achieves its
effect by the -aux-directory option of (pdf)latex, which currently is only implemented on the
MiKTeX version of (pdf)latex.
See also the -outdir/-output-directory options, and the $aux_dir, $out_dir, and
$search_path_separator configuration variables of latexmk. In particular, see the documentation
of $out_dir for some complications on what directory names are suitable.
-bibtex
When the source file uses bbl files for bibliography, run bibtex or biber as needed to regenerate
the bbl files.
This property can also be configured by setting the $bibtex_use variable to 2 in a configuration
file
-bibtex-
Never run bibtex or biber.
A common use for this option is when a document comes from an external source, complete with its
bbl file(s), and the user does not have the corresponding bib files available. In this situation
use of the -bibtex- option will prevent latexmk from trying to run bibtex or biber, which would
result in overwriting of the bbl files.
-bibtex-cond
When the source file uses bbl file(s) for the bibliography, run bibtex or biber as needed to
regenerate the bbl files, but only if the relevant bib file(s) exist. Thus when the bib files are
not available, bibtex or biber is not run, thereby avoiding overwriting of the bbl file(s). This
is the default setting.
(Note that it is possible for latexmk to decide that the bib file does not exist, even though the
bib file does exist and bibtex or biber finds it. The problem is that the bib file may not be in
the current directory but in some search path; the places latexmk and bibtex or biber cause to be
searched need not be identical. On modern installations of TeX and related programs this problem
should not arise, since latexmk uses the kpsewhich program to do the search, and kpsewhich should
use the same search path as bibtex and biber. If this problem arises, use the -bibtex option when
invoking latexmk.)
-bm <message>
A banner message to print diagonally across each page when converting the dvi file to postscript.
The message must be a single argument on the command line so be careful with quoting spaces and
such.
Note that if the -bm option is specified, the -ps option is assumed.
-bi <intensity>
How dark to print the banner message. A decimal number between 0 and 1. 0 is black and 1 is
white. The default is 0.95, which is OK unless your toner cartridge is getting low.
-bs <scale>
A decimal number that specifies how large the banner message will be printed. Experimentation is
necessary to get the right scale for your message, as a rule of thumb the scale should be about
equal to 1100 divided by the number of characters in the message. The default is 220.0 which is
just right for 5 character messages.
-commands
List the commands used by latexmk for processing files, and then exit.
-c Clean up (remove) all regeneratable files generated by latex and bibtex or biber except dvi,
postscript and pdf. These files are a combination of log files, aux files, latexmk's database
file of source file information, and those with extensions specified in the @generated_exts
configuration variable. In addition, files specified by the $clean_ext configuration variable are
removed.
This cleanup is instead of a regular make. See the -gg option if you want to do a cleanup then a
make.
If $bibtex_use is set to 0 or 1, bbl files are counted as non-regeneratable.
If $cleanup_includes_cusdep_generated is nonzero, regeneratable files are considered as including
those generated by custom dependencies and are also deleted. Otherwise these files are not
deleted.
-C Clean up (remove) all regeneratable files generated by latex and bibtex or biber. This is the
same as the -c option with the addition of dvi, postscript and pdf files, and those specified in
the $clean_full_ext configuration variable.
This cleanup is instead of a regular make. See the -gg option if you want to do a cleanup than a
make.
If $bibtex_use is set to 0 or 1, bbl files are counted as non-regeneratable.
If $cleanup_includes_cusdep_generated is nonzero, regeneratable files are considered as including
those generated by custom dependencies and are also deleted. Otherwise these files are not
deleted.
-CA (Obsolete). Now equivalent to the -C option. See that option for details.
-cd Change to the directory containing the main source file before processing it. Then all the
generated files (aux, log, dvi, pdf, etc) will be relative to the source file.
This option is particularly useful when latexmk is invoked from a GUI configured to invoke latexmk
with a full pathname for the source file.
-cd- Do NOT change to the directory containing the main source file before processing it. Then all the
generated files (aux, log, dvi, pdf, etc) will be relative to the current directory rather than
the source file.
This is the default behavior and corresponds to the behavior of the latex and pdflatex programs.
However, it is not desirable behavior when latexmk is invoked by a GUI configured to invoke
latexmk with a full pathname for the source file. See the -cd option.
-CF Remove the file containing the database of source file information, before doing the other actions
requested.
-d Set draft mode. This prints the banner message "DRAFT" across your page when converting the dvi
file to postscript. Size and intensity can be modified with the -bs and -bi options. The -bm
option will override this option as this is really just a short way of specifying:
latexmk -bm DRAFT
Note that if the -d option is specified, the -ps option is assumed.
-deps Show a list of dependent files after processing. This is in the form of a dependency list of the
form used by the make program, and it is therefore suitable for use in a Makefile. It gives an
overall view of the files without listing intermediate files, as well as latexmk can determine
them.
By default the list of dependent files is sent to stdout (i.e., normally to the screen unless
you've redirected latexmk's output). But you can set the filename where the list is sent by the
-deps-out= option.
See the section "USING latexmk WITH make" for an example of how to use a dependency list with
make.
Users familiar with GNU automake and gcc will find that the -deps option is very similar in its
purpose and results to the -M option to gcc. (In fact, latexmk also has options -M, -MF, and -MP
options that behave like those of gcc.)
-dependents
Equivalent to -deps.
-deps- Do not show a list of dependent files after processing. (This is the default.)
-dependents-
Equivalent to -deps-.
-deps-out=FILENAME
Set the filename to which the list of dependent files is written. If the FILENAME argument is
omitted or set to "-", then the output is sent to stdout.
Use of this option also turns on the output of the list of dependent files after processing.
-dF Dvi file filtering. The argument to this option is a filter which will generate a filtered dvi
file with the extension ".dviF". All extra processing (e.g. conversion to postscript, preview,
printing) will then be performed on this filtered dvi file.
Example usage: To use dviselect to select only the even pages of the dvi file:
latexmk -dF "dviselect even" foo.tex
-diagnostics
Print detailed diagnostics during a run. This may help for debugging problems or to understand
latexmk's behavior in difficult situations.
-dvi Generate dvi version of document.
-dvi- Turn off generation of dvi version of document. (This may get overridden, if some other file is
made (e.g., a .ps file) that is generated from the dvi file, or if no generated file at all is
requested.)
-e <code>
Execute the specified initialization code before processing. The code is Perl code of the same
form as is used in latexmk's initialization files -- for more details, see the information on the
-r option, and the section about "Configuration/initialization (RC) files". The code is typically
a sequence of assignment statements separated by semicolons.
The code is executed when the -e option is encountered during latexmk's parsing of its command
line. See the -r option for a way of executing initialization code from a file. An error results
in latexmk stopping. Multiple instances of the -r and -e options can be used, and they are
executed in the order they appear on the command line.
Some care is needed to deal with proper quoting of special characters in the code on the command
line. For example, suppose you want to set the latex command to use its -shell-escape option,
then under UNIX/LINUX you could use the line
latexmk -e '$latex=q/latex %O -shell-escape %S/' file.tex
Note that the single quotes block normal UNIX/LINUX command shells from treating the characters
inside the quotes as special. (In this example, the q/.../ construct is a Perl idiom equivalent
to using single quotes. This avoids the complications of getting a quote character inside an
already quoted string in a way that is independent of both the shell and the operating-system.)
The above command line will NOT work under MS-Windows with cmd.exe or command.com or 4nt.exe. For
MS-Windows with these command shells you could use
latexmk -e "$latex=q/latex %O -shell-escape %S/" file.tex
or
latexmk -e "$latex='latex %O -shell-escape %S'" file.tex
The last two examples will NOT work with UNIX/LINUX command shells.
-f Force latexmk to continue document processing despite errors. Normally, when latexmk detects that
LaTeX or another program has found an error which will not be resolved by further processing, no
further processing is carried out.
Note: "Further processing" means the running of other programs or the rerunning of latex (etc)
that would be done if no errors had occurred. If instead, or additionally, you want the latex
(etc) program not to pause for user input after an error, you should arrange this by an option
that is passed to the program, e.g., by latexmk's option -interaction=nonstopmode.
-f- Turn off the forced processing-past-errors such as is set by the -f option. This could be used to
override a setting in a configuration file.
-g Force latexmk to process document fully, even under situations where latexmk would normally decide
that no changes in the source files have occurred since the previous run. This option is useful,
for example, if you change some options and wish to reprocess the files.
-g- Turn off -g.
-gg "Super go mode" or "clean make": clean out generated files as if -C had been given, and then do a
regular make.
-h, -help
Print help information.
-jobname=STRING
Set the basename of output files(s) to STRING, instead of the default, which is the basename of
the specified TeX file.
This is like the same option for current implementations of the latex, pdflatex, etc, and the
passing of this option to these programs is part of latexmk's implementation of -jobname.
-l Run in landscape mode, using the landscape mode for the previewers and the dvi to postscript
converters. This option is not normally needed nowadays, since current previewers normally
determine this information automatically.
-l- Turn off -l.
-latex="COMMAND"
This sets the string specifying the command to run latex, and is typically used to add desired
options. Since the string normally contains spaces, it should be quoted, e.g.,
latexmk -latex="latex --shell-escape %O %S" foo.tex
The specification of the contents of the string are the same as for the $latex configuration
variable. Depending on your operating system and the command-line shell you are using, you may
need to change the single quotes to double quotes (or something else).
To set the command for running pdflatex (rather than the command for latex) see the -pdflatex
option.
Note that the effect of this option can also be achieved by using the -e option with a suitable
line of Perl code to set the $latex variable. See the explanation of the -e option.
-lualatex
Use lualatex. That is, use lualatex to process the source file(s) to pdf (in place of pdflatex).
This option is exactly equivalent to specifying the following sequence of options:
-pdflatex="lualatex %O %S" -pdf -dvi- -ps-
-M Show list of dependent files after processing. This is equivalent to the -deps option.
-MF file
If a list of dependents is made, the -MF specifies the file to write it to.
-MP If a list of dependents is made, includes phony target for each source file. If you use the
dependents list in a Makefile, the dummy rules work around errors make gives if you remove header
files without updating the Makefile to match.
-new-viewer
When in continuous-preview mode, always start a new viewer to view the generated file. By
default, latexmk will, in continuous-preview mode, test for a previously running previewer for the
same file and not start a new one if a previous previewer is running. However, its test sometimes
fails (notably if there is an already-running previewer that is viewing a file of the same name as
the current file, but in a different directory). This option turns off the default behavior.
-new-viewer-
The inverse of the -new-viewer option. It puts latexmk in its normal behavior that in preview-
continuous mode it checks for an already-running previewer.
-nobibtex
Never run bibtex or biber.
A common use for this option is when a document comes from an external source, complete with its
bbl file(s), and the user does not have the corresponding bib files available. In this situation
use of the -nobibtex option will prevent latexmk from trying to run bibtex or biber, which would
result in overwriting of the bbl files.
-norc Turn off the automatic reading of initialization (rc) files.
N.B. Normally the initialization files are read and obeyed, and then command line options are
obeyed in the order they are encountered. But -norc is an exception to this rule: it is acted on
first, no matter where it occurs on the command line.
-outdir=FOO or -output-directory=FOO
Sets the directory for the output files of (pdf)latex. This achieves its effect by the -output-
directory option of (pdf)latex, which currently (Dec. 2011 and later) is implemented on the common
versions of (pdf)latex, i.e., MiKTeX and TeXLive. It may not be present in other versions.
See also the -auxdir/-aux-directory options, and the $aux_dir, $out_dir, and
$search_path_separator configuration variables of latexmk. In particular, see the documentation
of $out_dir for some complications on what directory names are suitable.
-p Print out the document. By default the file to be printed is the first in the list postscript,
pdf, dvi that is being made. But you can use the -print=... option to change the type of file to
be printed, and you can configure this in a start up file (by setting the $print_type variable).
However, printing is enabled by default only under UNIX/LINUX systems, where the default is to use
the lpr command and only on postscript files. In general, the correct behavior for printing very
much depends on your system's software. In particular, under MS-Windows you must have suitable
program(s) available, and you must have configured the print commands used by latexmk. This can
be non-trivial. See the documentation on the $lpr, $lpr_dvi, and $lpr_pdf configuration variables
to see how to set the commands for printing.
This option is incompatible with the -pv and -pvc options, so it turns them off.
-pdf Generate pdf version of document using pdflatex. (If you wish to use lualatex or xelatex, you can
use whichever of the options -lualatex or -xelatex applies.) To configure latexmk to have such
behavior by default, see the section on "Configuration/initialization (rc) files".
-pdfdvi
Generate pdf version of document from the dvi file, by default using dvipdf.
-pdfps Generate pdf version of document from the ps file, by default using ps2pdf.
-pdf- Turn off generation of pdf version of document. (This can be used to override a setting in a
configuration file. It may get overridden if some other option requires the generation of a pdf
file.)
-pdflatex="COMMAND"
This sets the string specifying the command to run pdflatex, and is typically used to add desired
options. Since the string normally contains spaces, it should be quoted, e.g.,
latexmk -pdf -pdflatex="pdflatex --shell-escape %O %S" foo.tex
The specification of the contents of the string are the same as for the $pdflatex configuration
variable. Depending on your operating system and the command-line shell you are using, you may
need to change the single quotes to double quotes (or something else).
This option can also be used to set a program to be used instead of the standard pdflatex program,
e.g.,
latexmk -pdf -pdflatex="lualatex %O %S" foo.tex
to use lualatex or
latexmk -pdf -pdflatex="xelatex %O %S" foo.tex
to use xelatex.
To set the command for running latex (rather than the command for pdflatex) see the -latex option.
Note that the effect of this option can also be achieved by using the -e option with a suitable
line of Perl code to set the $pdflatex variable. See the explanation of the -e option.
-print=dvi, -print=ps, -print=pdf, -print=auto,
Define which kind of file is printed. This option also ensures that the requisite file is made,
and turns on printing.
The (default) case -print=auto determines the kind of print file automatically from the set of
files that is being made. The first in the list postscript, pdf, dvi that is among the files to
be made is the one used for print out.
-ps Generate postscript version of document.
-ps- Turn off generation of postscript version of document. This can be used to override a setting in
a configuration file. (It may get overridden by some other option that requires a postscript
file, for example a request for printing.)
-pF Postscript file filtering. The argument to this option is a filter which will generate a filtered
postscript file with the extension ".psF". All extra processing (e.g. preview, printing) will
then be performed on this filtered postscript file.
Example of usage: Use psnup to print two pages on the one page:
latexmk -ps -pF 'psnup -2' foo.tex
or
latexmk -ps -pF "psnup -2" foo.tex
Whether to use single or double quotes round the "psnup -2" will depend on your command
interpreter, as used by the particular version of perl and the operating system on your computer.
-pv Run file previewer. If the -view option is used, this will select the kind of file to be
previewed (dvi, ps or pdf). Otherwise the viewer views the "highest" kind of file selected, by
the -dvi, -ps, -pdf, -pdfps options, in the order dvi, ps, pdf (low to high). If no file type has
been selected, the dvi previewer will be used. This option is incompatible with the -p and -pvc
options, so it turns them off.
-pv- Turn off -pv.
-pvc Run a file previewer and continually update the .dvi, .ps, and/or .pdf files whenever changes are
made to source files (see the Description above). Which of these files is generated and which is
viewed is governed by the other options, and is the same as for the -pv option. The preview-
continuous option -pvc can only work with one file. So in this case you will normally only
specify one filename on the command line. It is also incompatible with the -p and -pv options, so
it turns these options off.
The -pvc option also turns off force mode (-f), as is normally best for continuous preview mode.
If you really want force mode, use the options in the order -pvc -f.
With a good previewer the display will be automatically updated. (Under some but not all versions
of UNIX/Linux "gv -watch" does this for postscript files; this can be set by a configuration
variable. This would also work for pdf files except for an apparent bug in gv that causes an
error when the newly updated pdf file is read.) Many other previewers will need a manual update.
Important note: the acroread program on MS-Windows locks the pdf file, and prevents new versions
being written, so it is a bad idea to use acroread to view pdf files in preview-continuous mode.
It is better to use a different viewer: SumatraPDF and gsview are good possibilities.
There are some other methods for arranging an update, notably useful for many versions of xdvi and
xpdf. These are best set in latexmk's configuration; see below.
Note that if latexmk dies or is stopped by the user, the "forked" previewer will continue to run.
Successive invocations with the -pvc option will not fork new previewers, but latexmk will
normally use the existing previewer. (At least this will happen when latexmk is running under an
operating system where it knows how to determine whether an existing previewer is running.)
-pvc- Turn off -pvc.
-quiet Same as -silent
-r <rcfile>
Read the specified initialization file ("RC file") before processing.
Be careful about the ordering: (1) Standard initialization files -- see the section below on
"Configuration/initialization (RC) files" -- are read first. (2) Then the options on the command
line are acted on in the order they are given. Therefore if an initialization file is specified
by the -r option, it is read during this second step. Thus an initialization file specified with
the -r option can override both the standard initialization files and previously specified
options. But all of these can be overridden by later options.
The contents of the RC file just comprise a piece of code in the Perl programming language
(typically a sequence of assignment statements); they are executed when the -r option is
encountered during latexmk's parsing of its command line. See the -e option for a way of giving
initialization code directly on latexmk's command line. An error results in latexmk stopping.
Multiple instances of the -r and -e options can be used, and they are executed in the order they
appear on the command line.
-recorder
Use the -recorder option with latex and pdflatex. In (most) modern versions of these programs,
this results in a file of extension .fls containing a list of the files that these programs have
read and written. Latexmk will then use this file to improve its detection of source files and
generated files after a run of latex or pdflatex.
For further information, see the documentation for the $recorder configuration variable.
-recorder-
Do not use the -recorder option with latex and pdflatex.
-rules Show a list of latemk's rules and dependencies after processing.
-rules-
Do not show a list of latexmk's rules and dependencies after processing. (This is the default.)
-showextraoptions
Show the list of extra latex and pdflatex options that latexmk recognizes. These are options for
the latex and pdflatex that latexmk recognizes, but simply passes through to these programs when
they are run. These options are (currently) a combination of those allowed by the TeXLive and
MiKTeX implementations. (If a particular option is given to latexmk but is not handled by the
particular implementation of latex or pdflatex that is being used, that program will probably give
an error message.) These options are very numerous, but are not listed in this documentation
because they have no effect on latexmk's actions.
There are a few options (-includedirectory=dir, -initialize, -ini) that are not recognized, either
because they don't fit with latexmk's intended operations, or because they need special processing
by latexmk that isn't implemented (at least, not yet).
There are also options that are accepted by latex etc, but instead trigger actions by latexmk:
-help, -version.
Finally, there are certain options for latex and pdflatex (e.g., -recorder) that trigger special
actions or behavior by latexmk itself as well as being passed in some form to the called latex and
pdflatex program, or that affect other programs as well. These options do have entries in this
documentation. These options are: -jobname=STRING, -aux-directory=dir, -output-directory=DIR,
-quiet, and -recorder.
-logfilewarninglist
-logfilewarnings After a run of (pdf)latex, give a list of warnings about undefined citations and
references (unless silent mode is on).
See also the $silence_logfile_warnings configuration variable.
-logfilewarninglist-
-logfilewarnings- After a run of (pdf)latex, do not give a list of warnings about undefined
citations and references. (Default)
See also the $silence_logfile_warnings configuration variable.
-silent
Run commands silently, i.e., with options that reduce the amount of diagnostics generated. For
example, with the default settings, the command "latex -interaction=batchmode" is used for latex.
See also the -logfilewarninglist and -logfilewarninglist- options.
Also reduce the number of informational messages that latexmk generates.
To change the options used to make the commands run silently, you need to configure latexmk with
changed values of its configuration variables, the relevant ones being $bibtex_silent_switch,
$biber_silent_switch, $dvipdf_silent_switch, $dvips_silent_switch, $latex_silent_switch,
$makeindex_silent_switch, and $pdflatex_silent_switch.
-use-make
When after a run of latex or pdflatex, there are warnings about missing files (e.g., as requested
by the LaTeX \input, \include, and \includgraphics), latexmk tries to make them by a custom
dependency. If no relevant custom dependency with an appropriate source file is found, and if the
-use-make option is set, then latexmk will try as a resort using the make program to try to make
the missing files.
Note that the filename may be specified without an extension, e.g., by \includegraphics{drawing}
in a LaTeX file. In that case, latexmk will try making drawing.ext with ext set in turn to the
possible extensions that are relevant for latex (or as appropriate pdflatex).
See also the documentation for the $use_make_for_missing_files configuration variable.
-use-make-
Do not use the make program to try to make missing files. (Default.)
-v, -version
Print version number of latexmk.
-verbose
Opposite of -silent. This is the default setting.
-view=default, -view=dvi, -view=ps, -view=pdf
Set the kind of file used when previewing is requested (e.g., by the -pv or -pvc switches). The
default is to view the "highest" kind of requested file (in the order dvi, ps, pdf).
-xelatex
Use xelatex. That is, use xelatex to process the source file(s) to pdf (in place of pdflatex).
This option is exactly equivalent to specifying the following sequence of options:
-pdflatex="xelatex %O %S" -pdf -dvi- -ps-
Compatibility between options
The preview-continuous option -pvc can only work with one file. So in this case you will normally only
specify one filename on the command line.
Options -p, -pv and -pvc are mutually exclusive. So each of these options turns the others off.
EXAMPLES
% latexmk thesis # run latex enough times to resolve
cross-references
% latexmk -pvc -ps thesis# run latex enough times to resolve
cross-references, make a postscript
file, start a previewer. Then
watch for changes in the source
file thesis.tex and any files it
uses. After any changes rerun latex
the appropriate number of times and
remake the postscript file. If latex
encounters an error, latexmk will
keep running, watching for
source file changes.
% latexmk -c # remove .aux, .log, .bbl, .blg, .dvi,
.pdf, .ps & .bbl files
HOW TO CHANGE THE WAY LATEXMK BEHAVES, DEALING WITH PROBLEMS, ETC
Some possibilities:
a. If you get a strange error, do look carefully at the output that is on the screen and in log files.
While there is much that is notoriously verbose in the output of latex (and that is added to by latexmk),
the verbosity is there for a reason: to enable the user to diagnose problems. Latexmk does repeat some
messages at the end of a run that it thinks would otherwise be easy to miss in the middle of other
output.
b. If latexmk doesn't do things the way you would like, the first step in finding out what to do is to
look in this documentation at the list of command line options and then at the sections on
configuration/initialization files. A lot of latexmk's behavior is configurable to deal with particular
situations. (But there is a lot of reading.)
c. Further tricks can involve replacing the standard commands that latexmk by other commands or scripts.
d. For possible examples of code for use in an RC file, see the directory example_rcfiles in the
distribution of latexmk (e.g., at http://www.ctan.org/tex-archive/support/latexmk/example_rcfiles). Even
if these examples don't do what you want, they may provide suitable inspiration.
e. There's a useful trick that can be used when you are lualatex instead of pdflatex (and in some related
situations). The problem is that latexmk won't notice a dependency on a file, bar.baz say, that is input
by the lua code in your document instead of by the LaTeX part. (Thus if you change bar.baz and rerun
latexmk, then latexmk will think no files have changed and not rerun lualatex, whereas if you had
'\input{bar.baz}' in the LaTeX part of the document, latexmk would notice the change.) One solution is
just to put the following somewhere in the LaTeX part of the document:
\typeout{(bar.baz)}
This puts a line in the log file that latexmk will treat as implying that the file bar.baz was read. (At
present I don't know a way of doing this automatically.) Of course, if the file has a different name,
change bar.baz to the name of your file.
f. Look on tex.stackexchange, i.e., at http://tex.stackexchange.com/questions/tagged/latexmk Someone may
have already solved your problem.
g. Ask a question at tex.stackexchange.com.
h. Or ask me (the author of latexmk). My e-mail is at the end of this documentation.
CONFIGURATION/INITIALIZATION (RC) FILES
Latexmk can be customized using initialization files, which are read at startup in the following order:
1) The system RC file, if it exists.
On a UNIX system, latexmk searches for following places for its system RC file, in the following
order, and reads the first it finds:
"/opt/local/share/latexmk/LatexMk",
"/usr/local/share/latexmk/LatexMk",
"/usr/local/lib/latexmk/LatexMk".
On a MS-WINDOWS system it looks for "C:\latexmk\LatexMk".
On a cygwin system (i.e., a MS-Windows system in which Perl is that of cygwin), latexmk reads for the
first it finds of
"/cygdrive/c/latexmk/LatexMk",
"/opt/local/share/latexmk/LatexMk",
"/usr/local/share/latexmk/LatexMk",
"/usr/local/lib/latexmk/LatexMk".
In addition, it then tries the same set of locations, but with the file name replaced "LatexMk"
replaced by "latexmkrc".
2) The user's RC file, "$HOME/.latexmkrc", if it exists. Here $HOME is the user's home directory.
[Latexmk determines the user's home directory as follows: It is the value of the environment variable
HOME, if this variable exists, which normally is the case on UNIX-like systems (including LINUX and OS-
X). Otherwise the environment variable USERPROFILE is used, if it exists, which normally is the case on
MS-Windows systems. Otherwise a blank string is used instead of $HOME.]
3) The RC file in the current working directory. This file can be named either "latexmkrc" or
".latexmkrc", and the first of these to be found is used, if any.
4) Any RC file(s) specified on the command line with the -r option.
Each RC file is a sequence of Perl commands. Naturally, a user can use this in creative ways. But for
most purposes, one simply uses a sequence of assignment statements that override some of the built-in
settings of Latexmk. Straightforward cases can be handled without knowledge of the Perl language by
using the examples in this document as templates. Comment lines are introduced by the "#" character.
Note that command line options are obeyed in the order in which they are written; thus any RC file
specified on the command line with the -r option can override previous options but can be itself
overridden by later options on the command line. There is also the -e option, which allows
initialization code to be specified in latexmk's command line.
For possible examples of code for in an RC file, see the directory example_rcfiles in the distribution
of latexmk (e.g., at http://www.ctan.org/tex-archive/support/latexmk/example_rcfiles).
HOW TO SET VARIABLES IN INITIALIZATION FILES
The important variables that can be configured are described in the section "List of configuration
variables usable in initialization files". Syntax for setting these variables is of the following forms:
$bibtex = 'bibtex %O %B';
for the setting of a string variable,
$preview_mode = 1;
for the setting of a numeric variable, and
@default_files = ('paper', 'paper1');
for the setting of an array of strings. It is possible to append an item to an array variable as
follows:
push @default_files, 'paper2';
Note that simple "scalar" variables have names that begin with a $ character and array variables have
names that begin with a @ character. Each statement ends with a semicolon.
Strings should be enclosed in single quotes. (You could use double quotes, as in many programming
languages. But then the Perl programming language brings into play some special rules for interpolating
variables into strings. People not fluent in Perl will want to avoid these complications.)
You can do much more complicated things, but for this you will need to consult a manual for the Perl
programming language.
FORMAT OF COMMAND SPECIFICATIONS
Some of the variables set the commands that latexmk uses for carrying out its work, for example to
generate a dvi file from a tex file or to view a postscript file. This section describes some important
features of how the commands are specified.
Placeholders: Supposed you wanted latexmk to use the command elatex in place of the regular latex
command, and suppose moreover that you wanted to give it the option "--shell-escape". You could do this
by the following setting:
$latex = 'elatex --shell-escape %O %S';
The two items starting with the % character are placeholders. These are substituted by appropriate
values before the command is run. Thus %S will be replaced by the source file that elatex will be
applied to, and %O will be replaced by any options that latexmk has decided to use for this command.
(E.g., if you used the -silent option it would replace %O by "-interaction=batchmode".)
The available placeholders are:
%B base of filename for current command. E.g., if a postscript file document.ps is being made from
the dvi file document.dvi, then the basename is document.
%D destination file (e.g., the name of the postscript file when converting a dvi file to postscript).
%O options
%R root filename. This is the base name for the main tex file.
%S source file (e.g., the name of the dvi file when converting a dvi file to ps).
%T The name of the primary tex file.
%Y Name of directory for auxiliary output files (see the configuration variable $aux_dir). A
directory separation character ('/') is appended if $aux_dir is non-empty and does not end in a
suitable character, with suitable characters being those appropriate to UNIX and MS-Windows, i.e.,
':', '/' and '\'.
%Z Name of directory for output files (see the configuration variable $out_dir). A directory
separation character ('/') is appended if $out_dir is non-empty and does not end in a suitable
character, with suitable characters being those appropriate to UNIX and MS-Windows, i.e., ':', '/'
and '\'.
If for some reason you need a literal % character in your string not subject to the above rules, use a
pair of these characters. Thus with the command specification $ps_previewer = 'latex -ad=%%Sfile.ad %S',
the %%S will become %S when the command is executed, but the %S will be replaced by the source filename,
which in this case would be the name of a postscript file to be viewed.
Appropriate quoting will be applied to the filename substitutions, so you mustn't supply them yourself
even if the names of your files have spaces in them. (But if your TeX filenames have spaces in them,
beware that many versions of the TeX program cannot correctly handle filenames containing spaces.) In
case latexmk's quoting does not work correctly on your system, you can turn it off -- see the
documentation for the variable $quote_filenames.
The distinction between %B and %R needs a bit of care, since they are often the same, but not always.
For example on a simple document, the basename of a bibtex run is the same as for the texfile. But in a
document with several bibliographies, the bibliography files will have a variety of names. Since bibtex
is invoked with the basename of the bibliography file, the setting for the bibtex command should
therefore be
$bibtex = 'bibtex %O %B';
Generally, you should use %B rather than %R. Similarly for most purposes, the name %T of the primary
texfile is not a useful placeholder.
See the default values in the section "List of configuration variables usable in initialization files"
for what is normally the most appropriate usage.
If you omit to supply any placeholders whatever in the specification of a command, latexmk will supply
what its author thinks are appropriate defaults. This gives compatibility with configuration files for
previous versions of latexmk, which didn't use placeholders.
"Detaching" a command: Normally when latexmk runs a command, it waits for the command to run to
completion. This is appropriate for commands like latex, of course. But for previewers, the command
should normally run detached, so that latexmk gets the previewer running and then returns to its next
task (or exits if there is nothing else to do). To achieve this effect of detaching a command, you need
to precede the command name with "start ", as in
$dvi_previewer = 'start xdvi %O %S';
This will be translated to whatever is appropriate for your operating system.
Notes: (1) In some circumstances, latex will always run a command detached. This is the case for a
previewer in preview continuous mode, since otherwise previewing continuously makes no sense. (2) This
precludes the possibility of running a command named start. (3) If the word start occurs more than once
at the beginning of the command string, that is equivalent to having just one. (4) Under cygwin, some
complications happen, since cygwin amounts to a complicated merging of UNIX and MS-Windows. See the
source code for how I've handled the problem.
Command names containing spaces: Under MS-Windows it is common that the name of a command includes
spaces, since software is often installed in a subdirectory of "C:\Program Files". Such command names
should be enclosed in double quotes, as in
$lpr_pdf = '"c:/Program Files/Ghostgum/gsview/gsview32.exe" /p %S';
$pdf_previewer = 'start "c:/Program Files/SumatraPDF/SumatraPDF.exe" %O %S';
$pdf_previewer = 'start "c:/Program Files/SumatraPDF (x86)/SumatraPDF.exe" %O %S';
(Note about the above example: Forward slashes are equivalent to backslashes in filenames under MS-
Windows, provided that the filename is inside double quotes. It is easier to use forward slashes in
examples like the one above, since then one does not have to worry about the rules for dealing with
forward slashes in strings in the Perl language.)
Command names under Cygwin: If latexmk is executed by Cygwin's Perl, be particularly certain that
pathnames in commands have forward slashes not the usual backslashes for the separator of pathname
components. See the above examples. Backslashes often get misinterpreted by the Unix shell used by
Cygwin's Perl to execute external commands. Forward slashes don't suffer from this problem, and (when
quoted, as above) are equally acceptable to MS-Windows.
Using MS-Windows file associations: A useful trick under modern versions of MS-Windows (e.g., WinXP) is
to use just the command 'start' by itself:
$dvi_previewer = 'start %S';
Under recent versions of MS-Windows, this will cause to be run whatever program the system has associated
with dvi files. (The same applies for a postscript viewer and a pdf viewer.) But note that this trick
is not always suitable for the pdf previwer, if your system has acroread for the default pdf viewer. As
explained elsewhere, acroread under MS-Windows does not work well with latex and latexmk, because
acroread locks the pdf file.
Not using a certain command: If a command is not to be run, the command name NONE is used, as in
$lpr = 'NONE lpr';
This typically is used when an appropriate command does not exist on your system. The string after the
"NONE" is effectively a comment.
Options to commands: Setting the name of a command can be used not only for changing the name of the
command called, but also to add options to command. Suppose you want latexmk to use latex with source
specials enabled. Then you might use the following line in an initialization file:
$latex = 'latex --src-specials %O %S';
Running a subroutine instead of an external command: Use a specification starting with "internal", as in
$latex = 'internal mylatex %O %S';
sub mylatex {
my @args = @_;
# Possible preprocessing here
return system 'latex', @args;
}
Advanced tricks: Normally one specifies a single command for the commands invoked by latexmk. Naturally,
if there is some complicated additional processing you need to do in your special situation, you can
write a script (or batch file) to do the processing, and then configure latexmk to use your script in
place of the standard program.
It is also possible to configure latexmk to run multiple commands. For example, if when running pdflatex
to generate a pdf file from a tex file you need to run another program after pdflatex to perform some
extra processing, you could do something like:
$pdflatex = 'pdflatex --shell-escape %O %S; pst2pdf_for_latexmk %B';
This definition assumes you are using a UNIX-like system (which includes Linux and OS-X), so that the two
commands to be run are separated by the semicolon in the middle of the string.
If you are using MS-Windows, you would replace the above line by
$pdflatex = 'cmd /c pdflatex --shell-escape %O %S'
. '&& pst2pdf_for_latexmk %B';
Here, the UNIX command separator ; is replaced by &&. In addition, there is a problem that some versions
of Perl on MS-Windows do not obey the command separator; this problem is overcome by explicitly invoking
the MS-Windows command-line processor cmd.exe.
LIST OF CONFIGURATION VARIABLES USABLE IN INITIALIZATION FILES
Default values are indicated in brackets.
$always_view_file_via_temporary [0]
Whether ps and pdf files are initially to be made in a temporary directory and then moved to the
final location. (This applies to dvips, dvipdf, and ps2pdf operations, and the filtering
operators on dvi and ps files. It does not apply to pdflatex, unfortunately.)
This use of a temporary file solves a problem that the making of these files can occupy a
substantial time. If a viewer sees that the file has changed, it reads the new file, and this can
cause havoc if the program writing the file has not yet finished its work.
See the $pvc_view_file_via_temporary variable for a setting that applies only if preview-
continuous mode (-pvc option) is used. See $tmpdir for the setting of the directory where the
temporary file is created.
$auto_rc_use [1]
Whether to automatically read the standard initialization (rc) files, which are the system RC
file, the user's RC file, and the RC file in the current directory. The command line option -norc
can be used to turn this setting off. Each RC file could also turn this setting off, i.e., it
could set $auto_rc_use to zero to prevent automatic reading of the later RC files.
This variable does not affect the reading of RC files specified on the command line by the -r
option.
$aux_dir [""]
The directory in which auxiliary files (aux, log, etc) are to be written by a run of (pdf)latex.
If this variable is not set, but $out_dir is set, then $aux_dir is set to $out_dir, which is the
directory to which general output files are to be written.
Important note: The effect of $aux_dir, if different from $out_dir, is achieved by giving
(pdf)latex the -aux-directory. Currently (Dec. 2011 and later) this only works on the MiKTeX
version of (pdf)latex.
See also the documentation of $out_dir for some complications on what directory names are
suitable.
$banner [0]
If nonzero, the banner message is printed across each page when converting the dvi file to
postscript. Without modifying the variable $banner_message, this is equivalent to specifying the
-d option.
Note that if $banner is nonzero, the $postscript_mode is assumed and the postscript file is always
generated, even if it is newer than the dvi file.
$banner_intensity [0.95]
Equivalent to the -bi option, this is a decimal number between 0 and 1 that specifies how dark to
print the banner message. 0 is black, 1 is white. The default is just right if your toner
cartridge isn't running too low.
$banner_message ["DRAFT"]
The banner message to print across each page when converting the dvi file to postscript. This is
equivalent to the -bm option.
$banner_scale [220.0]
A decimal number that specifies how large the banner message will be printed. Experimentation is
necessary to get the right scale for your message, as a rule of thumb the scale should be about
equal to 1100 divided by the number of characters in the message. The Default is just right for 5
character messages. This is equivalent to the -bs option.
@BIBINPUTS
This is an array variable, now mostly obsolete, that specifies directories where latexmk should
look for .bib files. By default it is set from the BIBINPUTS environment variable of the
operating system. If that environment variable is not set, a single element list consisting of
the current directory is set. The format of the directory names depends on your operating system,
of course. Examples for setting this variable are:
@BIBINPUTS = ( ".", "C:\bibfiles" );
@BIBINPUTS = ( ".", "\\server\bibfiles" );
@BIBINPUTS = ( ".", "C:/bibfiles" );
@BIBINPUTS = ( ".", "//server/bibfiles" );
@BIBINPUTS = ( ".", "/usr/local/texmf/bibtex/bib" );
Note that under MS Windows, either a forward slash "/" or a backward slash "\" can be used to
separate pathname components, so the first two and the second two examples are equivalent. Each
backward slash should be doubled to avoid running afoul of Perl's rules for writing strings.
Important note: This variable is now mostly obsolete in the current version of latexmk, since it
has a better method of searching for files using the kpsewhich command. However, if your system
is an unusual one without the kpsewhich command, you may need to set the variable @BIBINPUTS.
$biber ["biber %O %S"]
The biber processing program.
$biber_silent_switch ["--onlylog"]
Switch(es) for the biber processing program when silent mode is on.
$bibtex ["bibtex %O %S"]
The BibTeX processing program.
$bibtex_silent_switch ["-terse"]
Switch(es) for the BibTeX processing program when silent mode is on.
$bibtex_use [1]
Under what conditions to run BibTeX or biber. When latexmk discovers from the log file that one
(or more) BibTeX/biber-generated bibliographies are used, it can run BibTeX or biber whenever it
appears necessary to regenerate the bbl file(s) from their source bib database file(s).
But sometimes, the bib file(s) are not available (e.g., for a document obtained from an external
archive), but the bbl files are provided. In that case use of BibTeX or biber will result in
incorrect overwriting of the precious bbl files. The variable $bibtex_use controls whether this
happens. Its possible values are: 0: never use BibTeX or biber. 1: only use BibTeX or biber if
the bib files exist. 2: run BibTeX or biber whenever it appears necessary to update the bbl
files, without testing for the existence of the bib files.
$cleanup_includes_cusdep_generated [0]
If nonzero, specifies that cleanup also deletes files that are generated by custom dependencies.
(When doing a clean up, e.g., by use of the -C option, custom dependencies are those listed in the
.fdb_latexmk file from a previous run.)
$cleanup_includes_generated [0]
If nonzero, specifies that cleanup also deletes files that are detected in log file as being
generated (see the \openout lines in the log file). It will also include files made from these
first generation generated files.
$cleanup_mode [0]
If nonzero, specifies cleanup mode: 1 for full cleanup, 2 for cleanup except for dvi, ps and pdf
files, 3 for cleanup except for dep and aux files. (There is also extra cleaning as specified by
the $clean_ext, $clean_full_ext and @generated_exts variables.)
This variable is equivalent to specifying one of the -c or -C options. But there should be no
need to set this variable from an RC file.
$clean_ext [""]
Extra extensions of files for latexmk to remove when any of the clean-up options (-c or -C) is
selected. The value of this variable is a string containing the extensions separated by spaces.
It is also possible to specify a more general pattern of file to be deleted, by using the place
holder %R, as in commands, and it is also possible to use wildcards. Thus setting
$clean_ext = "out %R-blx.bib %R-figures*.log";
in an initialization file will imply that when a clean-up operation is specified, not only is the
standard set of files deleted, but also files of the form FOO.out, FOO-blx.bib, and %R-
figures*.log, where FOO stands for the basename of the file being processed (as in FOO.tex).
$clean_full_ext [""]
Extra extensions of files for latexmk to remove when the -C option is selected, i.e., extensions
of files to remove when the .dvi, etc files are to be cleaned-up.
More general patterns are allowed, as for $clean_ext.
$compiling_cmd [undefined], $failure_cmd [undefined], $success_cmd [undefined]
These variables specify commands that are executed at certain points of compilations during
preview-continuous mode. One motivation for their existance is to allow convenient visual
indications of compilation status even when the window receiving the screen output of the
compilation is hidden.
The commands are executed at the following points: $compiling_cmd at the start of compilation,
$success_cmd at the end of a successful compilation, and $failure_cmd at the end of an
unsuccessful compilation. If any of above variables is undefined (the default situation) or
blank, then the corresponding command is not executed.
An example of a typical setting of these variables is as follows
$compiling_cmd = "xdotool search --name \"%D\" set_window --name \"%D compiling\"";
$success_cmd = "xdotool search --name \"%D\" set_window --name \"%D OK\"";
$failure_cmd = "xdotool search --name \"%D\" set_window --name \"%D FAILURE\"";
These assume that the program xdotool is installed, that the previewer is using an X-Window system
for display, and that the title of the window contains the name of the displayed file, as it
normally does. When the commands are executed, the placeholder string %D is replaced by the name
of the destination file, which is the previewed file. The above commands result in an appropriate
string being appended to the filename in the window title: " compiling", " OK", or " FAILURE".
Other placeholders that can be used are %S, %T, and %R, with %S and %T normally being identical.
These can be useful for a command changing the title of the edit window. The visual indication in
a window title can useful, since the user does not have to keep shifting attention to the
(possibly hidden) compilation window to know the status of the compilation.
@cus_dep_list [()]
Custom dependency list -- see section on "Custom Dependencies".
@default_files [("*.tex")]
Default list of files to be processed.
Normally, if no filenames are specified on the command line, latexmk processes all tex files
specified in the @default_files variable, which by default is set to all tex files ("*.tex") in
the current directory. This is a convenience: just run latexmk and it will process an appropriate
set of files. But sometimes you want only some of these files to be processed. In this case you
set the @default_files in an initialization file (e.g., the file "latexmkrc" in the current
directory). Then if no files are specified on the command line then the files you specify by
setting @default_files are processed.
Three examples:
@default_files = ("paper_current");
@default_files = ("paper1", "paper2.tex");
@default_files = ("*.tex", "*.dtx");
Note that more than file may be given, and that the default extension is ".tex". Wild cards are
allowed. The parentheses are because @default_files is an array variable, i.e., a sequence of
filename specifications is possible.
$dependents_phony [0]
If a list of dependencies is output, this variable determines whether to include a phony target
for each source file. If you use the dependents list in a Makefile, the dummy rules work around
errors make gives if you remove header files without updating the Makefile to match.
$dependents_list [0]
Whether to display a list(s) of dependencies at the end of a run.
$deps_file ["-"]
Name of file to receive list(s) of dependencies at the end of a run, to be used if
$dependesnt_list is set. If the filename is "-", then the dependency list is set to stdout (i.e.,
normally the screen).
$do_cd [0]
Whether to change working directory to the directory specified for the main source file before
processing it. The default behavior is not to do this, which is the same as the behavior of latex
and pdflatex programs. This variable is set by the -cd and -cd- options on latexmk's command
line.
$dvi_filter [empty]
The dvi file filter to be run on the newly produced dvi file before other processing. Equivalent
to specifying the -dF option.
$dvi_mode [See below for default]
If nonzero, generate a dvi version of the document. Equivalent to the -dvi option.
The variable $dvi_mode defaults to 0, but if no explicit requests are made for other types of file
(postscript, pdf), then $dvi_mode will be set to 1. In addition, if a request for a file for
which a .dvi file is a prerequisite, then $dvi_mode will be set to 1.
$dvi_previewer ["start xdvi %O %S" under UNIX]
The command to invoke a dvi-previewer. [Default is "start" under MS-WINDOWS; under more recent
versions of Windows, this will cause to be run whatever command the system has associated with
.dvi files.]
Important note: Normally you will want to have a previewer run detached, so that latexmk doesn't
wait for the previewer to terminate before continuing its work. So normally you should prefix the
command by "start ", which flags to latexmk that it should do the detaching of the previewer
itself (by whatever method is appropriate to the operating system). But sometimes letting latexmk
do the detaching is not appropriate (for a variety of non-trivial reasons), so you should put the
"start " bit in yourself, whenever it is needed.
$dvi_previewer_landscape ["start xdvi %O %S"]
The command to invoke a dvi-previewer in landscape mode. [Default is "start" under MS-WINDOWS;
under more recent versions of Windows, this will cause to be run whatever command the system has
associated with .dvi files.]
$dvipdf ["dvipdf %O %S %D"]
Command to convert dvi to pdf file. A common reconfiguration is to use the dvipdfm command, which
needs its arguments in a different order:
$dvipdf = "dvipdfm %O -o %D %S";
WARNING: The default dvipdf script generates pdf files with bitmapped fonts, which do not look
good when viewed by acroread. That script should be modified to give dvips the options "-P pdf"
to ensure that type 1 fonts are used in the pdf file.
$dvipdf_silent_switch ["-q"]
Switch(es) for dvipdf program when silent mode is on.
N.B. The standard dvipdf program runs silently, so adding the silent switch has no effect, but is
actually innocuous. But if an alternative program is used, e.g., dvipdfmx, then the silent switch
has an effect. The default setting is correct for dvipdfm and dvipdfmx.
$dvips ["dvips %O -o %D %S"]
The program to used as a filter to convert a .dvi file to a .ps file. If pdf is going to be
generated from pdf, then the value of the $dvips_pdf_switch -- see below -- will be included in
the options substituted for "%O".
$dvips_landscape ["dvips -tlandscape %O -o %D %S"]
The program to used as a filter to convert a .dvi file to a .ps file in landscape mode.
$dvips_pdf_switch ["-P pdf"]
Switch(es) for dvips program when pdf file is to be generated from ps file.
$dvips_silent_switch ["-q"]
Switch(es) for dvips program when silent mode is on.
$dvi_update_command [""]
When the dvi previewer is set to be updated by running a command, this is the command that is run.
See the information for the variable $dvi_update_method for further information, and see
information on the variable $pdf_update_method for an example for the analogous case of a pdf
previewer.
$dvi_update_method [2 under UNIX, 1 under MS-Windows]
How the dvi viewer updates its display when the dvi file has changed. The values here apply
equally to the $pdf_update_method and to the $ps_update_method variables.
0 => update is automatic,
1=> manual update by user, which may only mean a mouse click on the viewer's window or may
mean a more serious action.
2 => Send the signal, whose number is in the variable $dvi_update_signal. The default value
under UNIX is suitable for xdvi.
3 => Viewer cannot do an update, because it locks the file. (As with acroread under MS-
Windows.)
4 => run a command to do the update. The command is specified by the variable
$dvi_update_command.
See information on the variable $pdf_update_method for an example of updating by command.
$dvi_update_signal [Under UNIX: SIGUSR1, which is a system-dependent value]
The number of the signal that is sent to the dvi viewer when it is updated by sending a signal --
see the information on the variable $dvi_update_method. The default value is the one appropriate
for xdvi on a UNIX system.
$failure_cmd [undefined]
See the documentation for $compiling_cmd.
$fdb_ext ["fdb_latexmk"]
The extension of the file which latexmk generates to contain a database of information on source
files. You will not normally need to change this.
$force_mode [0]
If nonzero, continue processing past minor latex errors including unrecognized cross references.
Equivalent to specifying the -f option.
@generated_exts [( aux , bbl , idx , ind , lof , lot , out , toc , $fdb_ext )]
This contains a list of extensions for files that are generated during a LaTeX run and that are
read in by LaTeX in later runs, either directly or indirectly.
This list has two uses: (a) to set the kinds of file to be deleted in a cleanup operation (with
the -c, -C, -CA, -g and -gg options), and (b) in the determination of whether a rerun of
(pdf)LaTeX is needed after a run that gives an error.
(Normally, a change of a source file during a run should provoke a rerun. This includes a file
generated by LaTeX, e.g., an aux file, that is read in on subsequent runs. But after a run that
results in an error, a new run should occur until the user has made a change in the files. But
the user may have corrected an error in a source .tex file during the run. So latexmk needs to
distinguish user-generated and automatically generated files; it determines the automatically
generated files as those with extensions in the list in @generated_exts.)
A convenient way to add an extra extension to the list, without losing the already defined ones is
to use a push command in the line in an RC file. E.g.,
push @generated_exts, "end";
adds the extension "end" to the list of predefined generated extensions. (This extension is used
by the RevTeX package, for example.)
$go_mode [0]
If nonzero, process files regardless of timestamps, and is then equivalent to the -g option.
%hash_calc_ignore_pattern
!!!This variable is for experts only!!!
The general rule latexmk uses for determining when an extra run of some program is needed is that
one of the source files has changed. But consider for example a latex package that causes an
encapsulated postscript file (an "eps" file) to be made that is to be read in on the next run.
The file contains a comment line giving its creation date and time. On the next run the time
changes, latex sees that the eps file has changed, and therefore reruns latex. This causes an
infinite loop, that is only terminated because latexmk has a limit on the number of runs to guard
against pathological situations.
But the changing line has no real effect, since it is a comment. You can instruct latex to ignore
the offending line as follows:
$hash_calc_ignore_pattern{'eps'} = '^%%CreationDate: ';
This creates a rule for files with extension .eps about lines to ignore. The left-hand side is a
Perl idiom for setting an item in a hash. Note that the file extension is specified without a
period. The value, on the right-hand side, is a string containing a regular expresssion. (See
documentation on Perl for how they are to be specified in general.) This particular regular
expression specifies that lines beginning with "%%CreationDate: " are to be ignored in deciding
whether a file of the given extension .eps has changed.
There is only one regular expression available for each extension. If you need more one pattern
to specify lines to ignore, then you need to combine the patterns into a single regular
expression. The simplest method is separate the different simple patterns by a vertical bar
character (indicating "alternation" in the jargon of regular expressions). For example,
$hash_calc_ignore_pattern{'eps'} = '^%%CreationDate: |^%%Title: ';
causes lines starting with either "^%%CreationDate: " or "^%%Title: " to be ignored.
It may happen that a pattern to be ignored is specified in, for example, in a system or user
initialization file, and you wish to remove this in a file read later. To do this, you use Perl's
delete function, e.g.,
delete $hash_calc_ignore_pattern{'eps'};
$kpsewhich ["kpsewhich %S"]
The program called to locate a source file when the name alone is not sufficient. Most filenames
used by latexmk have sufficient path information to be found directly. But sometimes, notably
when .bib files are found from the log file of a bibtex or biber run, the name of the file, but
not its path is known. The program specified by $kpsewhich is used to find it.
See also the @BIBINPUTS variable for another way that latexmk also uses to try to locate files; it
applies only in the case of .bib files.
$landscape_mode [0]
If nonzero, run in landscape mode, using the landscape mode previewers and dvi to postscript
converters. Equivalent to the -l option. Normally not needed with current previewers.
$latex ["latex %O %S"]
The LaTeX processing program. Note that as with other programs, you can use this variable not
just to change the name of the program used, but also specify options to the program. E.g.,
$latex = "latex --src-specials";
%latex_input_extensions
This variable specifies the extensions tried by latexmk when it finds that a LaTeX run resulted in
an error that a file has not been found, and the file is given without an extension. This
typically happens when LaTeX commands of the form \input{file} or \includegraphics{figure}, when
the relevant source file does not exist.
In this situation, latexmk searches for custom dependencies to make the missing file(s), but
restricts it to the extensions specified by the variable %latex_input_extensions. The default
extensions are 'tex' and 'eps'.
(For Perl experts: %latex_input_extensions is a hash whose keys are the extensions. The values
are irrelevant.) Two subroutines are provided for manipulating this and the related variable
%pdflatex_input_extensions, add_input_ext and remove_input_ext. They are used as in the following
examples are possible lines in an initialization file:
remove_input_ext( 'latex', 'tex' );
removes the extension 'tex' from latex_input_extensions
add_input_ext( 'latex', 'asdf' );
add the extension 'asdf to latex_input_extensions. (Naturally with such an extension, you should
have made an appropriate custom dependency for latexmk, and should also have done the appropriate
programming in the LaTeX source file to enable the file to be read. The standard extensions are
handled by LaTeX and its graphics/graphicx packages.
$latex_silent_switch ["-interaction=batchmode"]
Switch(es) for the LaTeX processing program when silent mode is on.
If you use MikTeX, you may prefer the results if you configure the options to include -c-style-
errors, e.g., by the following line in an initialization file
$latex_silent_switch = "-interaction=batchmode -c-style-errors";
$lpr ["lpr %O %S" under UNIX/LINUX, "NONE lpr" under MS-WINDOWS]
The command to print postscript files.
Under MS-Windows (unlike UNIX/LINUX), there is no standard program for printing files. But there
are ways you can do it. For example, if you have gsview installed, you could use it with the
option "/p":
$lpr = '"c:/Program Files/Ghostgum/gsview/gsview32.exe" /p';
If gsview is installed in a different directory, you will need to make the appropriate change.
Note the combination of single and double quotes around the name. The single quotes specify that
this is a string to be assigned to the configuration variable $lpr. The double quotes are part of
the string passed to the operating system to get the command obeyed; this is necessary because one
part of the command name ("Program Files") contains a space which would otherwise be
misinterpreted.
$lpr_dvi ["NONE lpr_dvi"]
The printing program to print dvi files.
$lpr_pdf ["NONE lpr_pdf"]
The printing program to print pdf files.
Under MS-Windows you could set this to use gsview, if it is installed, e.g.,
$lpr = '"c:/Program Files/Ghostgum/gsview/gsview32.exe" /p';
If gsview is installed in a different directory, you will need to make the appropriate change.
Note the double quotes around the name: this is necessary because one part of the command name
("Program Files") contains a space which would otherwise be misinterpreted.
$make ["make"]
The make processing program.
$makeindex ["makeindex %O -o %D %S"]
The index processing program.
$makeindex_silent_switch ["-q"]
Switch(es) for the index processing program when silent mode is on.
$max_repeat [5]
The maximum number of times latexmk will run latex/pdflatex before deciding that there may be an
infinite loop and that it needs to bail out, rather than rerunning latex/pdflatex again to resolve
cross-references, etc. The default value covers all normal cases.
(Note that the "etc" covers a lot of cases where one run of latex/pdflatex generates files to be
read in on a later run.)
$MSWin_back_slash [1]
This configuration variable only has an effect when latexmk is running under MS-Windows. It
determines whether, when a command is executed under MS-Windows, there should be substituted "\"
for the separator character between components of a directory name. Internally, latexmk uses "/"
for the directory separator character, which is the character used by Unix-like systems.
For many programs under MS-Windows, both "\" and "/" are acceptable as the directory separator
character. But some programs only accept "\". So for safety latexmk makes a translation, by
default. It is conceivable that under certain situations this is undesirable, so the
configuration can be changed. (A possible example might be when some of the software is
implemented using Cygwin, which provides an Unix-like environment inside MS-Windows.)
$new_viewer_always [0]
This variable applies to latexmk only in continuous-preview mode. If $new_viewer_always is 0,
latexmk will check for a previously running previewer on the same file, and if one is running will
not start a new one. If $new_viewer_always is non-zero, this check will be skipped, and latexmk
will behave as if no viewer is running.
$out_dir [""]
The directory in which output files are to be written by a run of (pdf)latex. See also the
variable $aux_dir.
The effect of this variable (when non-blank) is achieved by using the -output-directory option of
(pdf)latex. This exists in the usual current (Dec. 2011 and later) implementations of TeX, i.e.,
MiKTeX and TeXLive. But it may not be present in other versions.
Commonly, the directory specified for output files is a subdirectory of the current working
directory. However, if you specify some other directory, e.g., "/tmp/foo" or "../output", be
aware that this could cause problems, e.g., with makeindex or bibtex. This is because modern
versions of these programs, by default, will refuse to work when they find that they are asked to
write to a file in a directory that appears not to be the current working directory or one of its
subdirectories. This is part of security measures by the whole TeX system that try to prevent
malicious or errant TeX documents from incorrectly messing with a user's files. If for $out_dir
or $aux_dir you really do need to specify an absolute pathname (e.g., "/tmp/foo") or a path (e.g.,
"../output") that includes a higher-level directory, then you need to disable the security
measures (and assume any risks). This can be done by temporarily setting the operating system's
environment variable openout_any to "a" (as in "all"), to override the default "paranoid" setting.
$pdf_mode [0]
If zero, do NOT generate a pdf version of the document. If equal to 1, generate a pdf version of
the document using pdflatex. If equal to 2, generate a pdf version of the document from the ps
file, by using the command specified by the $ps2pdf variable. If equal to 3, generate a pdf
version of the document from the dvi file, by using the command specified by the $dvipdf variable.
Equivalent to the -pdf-, -pdf, -pdfdvi, -pdfps options.
$pdflatex ["pdflatex %O %S"]
The LaTeX processing program in a version that makes a pdf file instead of a dvi file.
An example of the use of this variable is to arrange for lualatex, xelatex or some similar program
to be used instead of pdflatex. Note that lualatex and xelatex only produce .pdf files (and not
.dvi), so to use them you will also need to turn on production of .pdf files, and to turn off the
production of .dvi (and .ps) files, either by command line options or by suitable settings in a
configuration file. Thus to use lualatex, the following settings are appropriate:
$pdflatex = "lualatex %O %S";
$pdf_mode = 1; $postscript_mode = $dvi_mode = 0;
To use xelatex, the corresponding settings are:
$pdflatex = "xelatex %O %S";
$pdf_mode = 1; $postscript_mode = $dvi_mode = 0;
Another use of the same variable is to add certain options to the command line for the program,
e.g.,
$pdflatex = "pdflatex --shell-escape %O %S";
%pdflatex_input_extensions
This variable specifies the extensions tried by latexmk when it finds that a pdflatex run resulted
in an error that a file has not been found, and the file is given without an extension. This
typically happens when LaTeX commands of the form \input{file} or \includegraphics{figure}, when
the relevant source file does not exist.
In this situation, latexmk searches for custom dependencies to make the missing file(s), but
restricts it to the extensions specified by the variable %pdflatex_input_extensions. The default
extensions are 'tex', 'pdf', 'jpg, and 'png'.
(For Perl experts: %pdflatex_input_extensions is a hash whose keys are the extensions. The values
are irrelevant.) Two subroutines are provided for manipulating this and the related variable
%latex_input_extensions, add_input_ext and remove_input_ext. They are used as in the following
examples are possible lines in an initialization file:
remove_input_ext( 'pdflatex', 'tex' );
removes the extension 'tex' from pdflatex_input_extensions
add_input_ext( 'pdflatex', 'asdf' );
add the extension 'asdf to pdflatex_input_extensions. (Naturally with such an extension, you
should have made an appropriate custom dependency for latexmk, and should also have done the
appropriate programming in the LaTeX source file to enable the file to be read. The standard
extensions are handled by pdflatex and its graphics/graphicx packages.)
$pdflatex_silent_switch ["-interaction=batchmode"]
Switch(es) for the pdflatex program (specified in the variable $pdflatex when silent mode is on.
If you use MikTeX, you may prefer the results if you configure the options to include -c-style-
errors, e.g., by the following line in an initialization file
$latex_silent_switch = "-interaction=batchmode -c-style-errors";
$pdf_previewer ["start acroread %O %S"]
The command to invoke a pdf-previewer.
On MS-WINDOWS, the default is changed to "cmd /c start """; under more recent versions of Windows,
this will cause to be run whatever command the system has associated with .pdf files. But this
may be undesirable if this association is to acroread -- see the notes in the explanation of the
-pvc option.]
On OS-X the default is changed to "open %S", which results in OS-X starting up (and detaching) the
viewer associated with the file. By default, for pdf files this association is to OS-X's preview,
which is quite satisfactory.
WARNING: Problem under MS-Windows: if acroread is used as the pdf previewer, and it is actually
viewing a pdf file, the pdf file cannot be updated. Thus makes acroread a bad choice of previewer
if you use latexmk's previous-continuous mode (option -pvc) under MS-windows. This problem does
not occur if, for example, SumatraPDF or gsview is used to view pdf files.
Important note: Normally you will want to have a previewer run detached, so that latexmk doesn't
wait for the previewer to terminate before continuing its work. So normally you should prefix the
command by "start ", which flags to latexmk that it should do the detaching of the previewer
itself (by whatever method is appropriate to the operating system). But sometimes letting latexmk
do the detaching is not appropriate (for a variety of non-trivial reasons), so you should put the
"start " bit in yourself, whenever it is needed.
$pdf_update_command [""]
When the pdf previewer is set to be updated by running a command, this is the command that is run.
See the information for the variable $pdf_update_method.
$pdf_update_method [1 under UNIX, 3 under MS-Windows]
How the pdf viewer updates its display when the pdf file has changed. See the information on the
variable $dvi_update_method for the codes. (Note that information needs be changed slightly so
that for the value 4, to run a command to do the update, the command is specified by the variable
$pdf_update_command, and for the value 2, to specify update by signal, the signal is specified by
$pdf_update_signal.)
Note that acroread under MS-Windows (but not UNIX) locks the pdf file, so the default value is
then 3.
Arranging to use a command to get a previewer explicitly updated requires three variables to be
set. For example:
$pdf_previewer = "start xpdf -remote %R %O %S";
$pdf_update_method = 4;
$pdf_update_command = "xpdf -remote %R -reload";
The first setting arranges for the xpdf program to be used in its "remote server mode", with the
server name specified as the rootname of the TeX file. The second setting arranges for updating
to be done in response to a command, and the third setting sets the update command.
$pdf_update_signal [Under UNIX: SIGHUP, which is a system-dependent value]
The number of the signal that is sent to the pdf viewer when it is updated by sending a signal --
see the information on the variable $pdf_update_method. The default value is the one appropriate
for gv on a UNIX system.
$pid_position[1 under UNIX, -1 under MS-Windows]
The variable $pid_position is used to specify which word in lines of the output from $pscmd
corresponds to the process ID. The first word in the line is numbered 0. The default value of 1
(2nd word in line) is correct for Solaris 2.6 and Linux. Setting the variable to -1 is used to
indicate that $pscmd is not to be used.
$postscript_mode [0]
If nonzero, generate a postscript version of the document. Equivalent to the -ps option.
If some other request is made for which a postscript file is needed, then $postscript_mode will be
set to 1.
$preview_continuous_mode [0]
If nonzero, run a previewer to view the document, and continue running latexmk to keep .dvi up-to-
date. Equivalent to the -pvc option. Which previewer is run depends on the other settings, see
the command line options -view=, and the variable $view.
$preview_mode [0]
If nonzero, run a previewer to preview the document. Equivalent to the -pv option. Which
previewer is run depends on the other settings, see the command line options -view=, and the
variable $view.
$printout_mode [0]
If nonzero, print the document using lpr. Equivalent to the -p option. This is recommended not
to be set from an RC file, otherwise you could waste lots of paper.
$print_type = ["auto"]
Type of file to printout: possibilities are "auto", "dvi", "none", "pdf", or "ps". See the
option -print= for the meaning of the "auto" value.
$pscmd Command used to get all the processes currently run by the user. The -pvc option uses the command
specified by the variable $pscmd to determine if there is an already running previewer, and to
find the process ID (needed if latexmk needs to signal the previewer about file changes).
Each line of the output of this command is assumed to correspond to one process. See the
$pid_position variable for how the process number is determined.
The default for pscmd is "NONE" under MS-Windows and cygwin (i.e., the command is not used), "ps
--width 200 -f -u $ENV{USER}" under linux, "ps -ww -u $ENV{USER}" under darwin (Macintosh OS-X),
and "ps -f -u $ENV{USER}" under other operating systems (including other flavors of UNIX). In
these specifications "$ENV{USER}" is substituted by the username.
$ps2pdf ["ps2pdf %O %S %D"]
Command to convert ps to pdf file.
$ps_filter [empty]
The postscript file filter to be run on the newly produced postscript file before other
processing. Equivalent to specifying the -pF option.
$ps_previewer ["start gv %O %S", but start %O %S under MS-WINDOWS]
The command to invoke a ps-previewer. (The default under MS-WINDOWS will cause to be run whatever
command the system has associated with .ps files.)
Note that gv could be used with the -watch option updates its display whenever the postscript file
changes, whereas ghostview does not. However, different versions of gv have slightly different
ways of writing this option. You can configure this variable appropriately.
WARNING: Linux systems may have installed one (or more) versions of gv under different names,
e.g., ggv, kghostview, etc, but perhaps not one called gv.
Important note: Normally you will want to have a previewer run detached, so that latexmk doesn't
wait for the previewer to terminate before continuing its work. So normally you should prefix the
command by "start ", which flags to latexmk that it should do the detaching of the previewer
itself (by whatever method is appropriate to the operating system). But sometimes letting latexmk
do the detaching is not appropriate (for a variety of non-trivial reasons), so you should put the
"start " bit in yourself, whenever it is needed.
$ps_previewer_landscape ["start gv -swap %O %S", but start %O %S under MS-WINDOWS]
The command to invoke a ps-previewer in landscape mode.
$ps_update_command [""]
When the postscript previewer is set to be updated by running a command, this is the command that
is run. See the information for the variable $ps_update_method.
$ps_update_method [0 under UNIX, 1 under MS-Windows]
How the postscript viewer updates its display when the ps file has changed. See the information on
the variable $dvi_update_method for the codes. (Note that information needs be changed slightly
so that for the value 4, to run a command to do the update, the command is specified by the
variable $ps_update_command, and for the value 2, to specify update by signal, the signal is
specified by $ps_update_signal.)
$ps_update_signal [Under UNIX: SIGHUP, which is a system-dependent value]
The number of the signal that is sent to the pdf viewer when it is updated by sending a signal --
see $ps_update_method. The default value is the one appropriate for gv on a UNIX system.
$pvc_view_file_via_temporary [1]
The same as $always_view_file_via_temporary, except that it only applies in preview-continuous
mode (-pvc option).
$quote_filenames [1]
This specifies whether substitutions for placeholders in command specifications (as in $pdflatex)
are surrounded by double quotes. If this variable is 1 (or any other value Perl regards as true),
then quoting is done. Otherwise quoting is omitted.
The quoting method used by latexmk is tested to work correctly under UNIX systems (including Linux
and Mac OS-X) and under MS-Windows. It allows the use of filenames containing special characters,
notably spaces. (But note that many versions of LaTeX and PdfLaTeX cannot correctly deal with TeX
files whose names contain spaces. Latexmk's quoting only ensures that such filenames are
correctly treated by the operating system in passing arguments to programs.)
$recorder [0]
Whether to use the -recorder option to latex and pdflatex. Use of this option results in a file of
extension .fls containing a list of the files that these programs have read and written. Latexmk
will then use this file to improve its detection of source files and generated files after a run
of latex or pdflatex.
It is generally recommended to use this option (or to configure the $recorder variable to be on.)
But it only works if (pdf)latex supports the -recorder option, which is true for most current
implementations
Note about the name of the .fls file: Most implementations of (pdf)latex produce an .fls file with
the same basename as the main document's LaTeX, e.g., for Document.tex, the .fls file is
Document.fls. However, some implementations instead produce files named for the program, i.e.,
latex.fls or pdflatex.fls. In this second case, latexmk copies the latex.fls or pdflatex.fls to a
file with the basename of the main LaTeX document, e.g., Document.fls.
$search_path_separator [See below for default]
The character separating paths in the environment variables TEXINPUTS, BIBINPUTS, and BSTINPUTS.
This variable is mainly used by latexmk when the -outdir, -output-directory, -auxdir, and/or -aux-
directory options are used. In that case latexmk needs to communicate appropriately modified
search paths to $bibtex, dvipdf, dvips, and (pdf)latex.
[Comment to technically savvy readers: (pdf)latex doesn't actually need the modified search path,
because it corrects it internally. But, surprisingly, dvipdf and dvips do, because sometimes
graphics files get generated in the output or aux directories.]
The default under MSWin and Cygwin is ';' and under UNIX-like operating systems (including Linux
and OS-X) is ':'. Normally the defaults give correct behavior. But there can be difficulties if
your operating system is of one kind, but some of your software is running under an emulator for
the other kind of operating system; in that case you'll need to find out what is needed, and set
$search_path_separator explicitly. (The same goes, of course, for unusual operating systems that
are not in the MSWin, Linux, OS-X, Unix collection.)
$silence_logfile_warnings [0]
Whether after a run of (pdf)latex to summarize warnings in the log file about undefined citations
and references. Setting $silence_logfile_warnings=0 gives the summary of warnings (provided
silent mode isn't also set), and this is useful to locate undefined citations and references
without searching through the much more verbose log file or the screen output of (pdf)latex. But
the summary can also be excessively annoying. The default is not to give these warnings. The
command line options -silence_logfile_warning_list and -silence_logfile_warning_list- also set
this variable.
Note that multiple occurrences for the same undefined object on the same page and same line will
be compressed to a single warning.
$silent [0]
Whether to run silently. Setting $silent to 1 has the same effect as the -quiet of -silent
options on the command line.
$sleep_time [2]
The time to sleep (in seconds) between checking for source file changes when running with the -pvc
option. This is subject to a minimum of one second delay, except that zero delay is also allowed.
A value of exactly 0 gives no delay, and typically results in 100% CPU usage, which may not be
desirable.
$texfile_search [""]
This is an obsolete variable, replaced by the @default_files variable.
For backward compatibility, if you choose to set $texfile_search, it is a string of space-
separated filenames, and then latexmk replaces @default_files with the filenames in
$texfile_search to which is added "*.tex".
$success_cmd [undefined]
See the documentation for $compiling_cmd.
$tmpdir [See below for default]
Directory to store temporary files that latexmk may generate while running.
The default under MSWindows (including cygwin), is to set $tmpdir to the value of the first of
whichever of the system environment variables TMPDIR or TEMP exists, otherwise to the current
directory. Under other operating systems (expected to be UNIX/Linux, including OS-X), the default
is the value of the system environment variable TMPDIR if it exists, otherwise "/tmp".
$use_make_for_missing_files [0]
Whether to use make to try and make files that are missing after a run of latex or pdflatex, and
for which a custom dependency has not been found. This is generally useful only when latexmk is
used as part of a bigger project which is built by using the make program.
Note that once a missing file has been made, no further calls to make will be made on a subsequent
run of latexmk to update the file. Handling this problem is the job of a suitably defined
Makefile. See the section "USING latexmk WITH make" for how to do this. The intent of calling
make from latexmk is merely to detect dependencies.
$view ["default"]
Which kind of file is to be previewed if a previewer is used. The possible values are "default",
"dvi", "ps", "pdf". The value of "default" means that the "highest" of the kinds of file
generated is to be used (among dvi, ps and pdf).
CUSTOM DEPENDENCIES
In any RC file a set of custom dependencies can be set up to convert a file with one extension to a file
with another. An example use of this would be to allow latexmk to convert a .fig file to .eps to be
included in the .tex file.
The old method of configuring latexmk was to directly manipulate the @cus_dep_list array that contains
information defining the custom dependencies. This method still works. But now there are subroutines
that allow convenient manipulations of the custom dependency list. These are
add_cus_dep( fromextension, toextension, must, subroutine )
remove_cus_dep( fromextension, toextension )
show_cus_dep()
The custom dependency is a list of rules, each of which is specified as follow:
from extension:
The extension of the file we are converting from (e.g. "fig"). It is specified without a period.
to extension:
The extension of the file we are converting to (e.g. "eps"). It is specified without a period.
must: If non-zero, the file from which we are converting must exist, if it doesn't exist latexmk will
give an error message and exit unless the -f option is specified. If must is zero and the file we
are converting from doesn't exist, then no action is taken.
function:
The name of the subroutine that latexmk should call to perform the file conversion. The first
argument to the subroutine is the base name of the file to be converted without any extension.
The subroutines are declared in the syntax of Perl. The function should return 0 if it was
successful and a nonzero number if it failed.
It is invoked whenever latexmk detects that a run of latex/pdflatex needs to read a file, like a graphics
file, whose extension is the to-extension of a custom dependency. Then latexmk examines whether a file
exists with the same name, but with the corresponding from-extension, as specified in the custom-
dependency rule. If it does, then whenever the destination file (the one with the to-extension) is out-
of-date with respect to the corresponding source file.
To make the new destination file, the Perl subroutine specified in the rule is invoked, with an argument
that is the base name of the files in question. Simple cases just involve a subroutine invoking an
external program; this can be done by following the templates below, even by those without knowledge of
the Perl programming language. Of course, experts could do something much more elaborate.
One other item in each custom-dependency rule labeled "must" above specifies how the rule should be
applied when the source file fails to exist.
A simple and typical example of code in an initialization rcfile is
add_cus_dep( 'fig', 'eps', 0, 'fig2eps' );
sub fig2eps {
system( "fig2dev -Leps \"$_[0].fig\" \"$_[0].eps\"" );
}
The first line adds a custom dependency that converts a file with extension "fig", as created by the xfig
program, to an encapsulated postscript file, with extension "eps". The remaining lines define a
subroutine that carries out the conversion. If a rule for converting "fig" to "eps" files already exists
(e.g., from a previously read-in initialization file), the latexmk will delete this rule before making
the new one.
Suppose latexmk is using this rule to convert a file "figure.fig" to "figure.eps". Then it will invoke
the fig2eps subroutine defined in the above code with a single argument "figure", which is the basename
of each of the files (possibly with a path component). This argument is referred to by Perl as $_[0].
In the example above, the subroutine uses the Perl command system to invoke the program fig2dev. The
double quotes around the string are a Perl idiom that signify that each string of the form of a variable
name, $_[0] in this case, is to be substituted by its value.
If the return value of the subroutine is non-zero, then latexmk will assume an error occurred during the
execution of the subroutine. In the above example, no explicit return value is given, and instead the
return value is the value returned by the last (and only) statement, i.e., the invocation of system,
which returns the value 0 on success.
If you use pdflatex instead of latex, then you will probably prefer to convert your graphics files to pdf
format, in which case you would replace the above code in an initialization file by
add_cus_dep( 'fig', 'pdf, 0, 'fig2pdf' );
sub fig2pdf {
system( "fig2dev -Lpdf \"$_[0].fig\" \"$_[0].pdf\"" );
}
Note 1: In the command lines given in the system commands in the above examples, double quotes have been
inserted around the file names (implemented by '\"' in the Perl language). They immunize the running of
the program against special characters in filenames. Very often these quotes are not necessary, i.e.,
they can be omitted. But it is normally safer to keep them in. Even though the rules for quoting vary
between operating systems, command shells and individual pieces of software, the quotes in the above
examples do not cause problems in the cases I have tested.
Note 2: One case in which the quotes are important is when the files are in a subdirectory and your
operating system is Microsoft Windows. Then the separator character for directory components can be
either a forward slash '/' or Microsoft's more usual backward slash ยด\'. Forward slashes are generated
by latexmk, to maintain its sanity from software like MiKTeX that mixes both directory separators; but
their correct use normally requires quoted filenames. (See a log file from a run of MiKTeX (at least in
v. 2.9) for an example of the use of both directory separators.)
If you have some general custom dependencies defined in the system or user initialization file, you may
find that for a particular project they are undesirable. So you might want to delete the unneeded ones.
For example, you remove any "fig" to "eps" rule by the line
remove_cus_dep( 'fig', 'eps' );
If you have complicated sets of custom dependencies, you may want to get a listing of the custom
dependencies. This is done by using the line
show_cus_dep();
in an initialization file.
Another example of a custom dependency overcomes a limitation of latexmk concerning index files. The
only index-file conversion built-in to latexmk is from an ".idx" file written on one run of
latex/pdflatex to an ".ind" file to be read in on a subsequent run. But with the index.sty package you
can create extra indexes with extensions that you configure. Latexmk does not know how to deduce the
extensions from the information it has. But you can easily write a custom dependency. For example if
your latex file uses the command "\newindex{special}{ndx}{nnd}{Special index}" you will need to convert
files with the extension .ndx to .nnd. The following lines in an initialization RC file will cause this
to happen:
add_cus_dep('ndx', 'nnd', 0, 'makendx2nnd');
sub makendx2nnd {
system( "makeindex -o \"$_[0].nnd\" \"$_[0].ndx\"" );
}
(You will need to modify this code if you use filenames with spaces in them, to provide correct quoting
of the filenames.)
Those of you with experience with Makefiles, will undoubtedly be concerned that the .ndx file is written
during a run of latex/pdflatex and is always later than the .nnd last read in. Thus the .nnd appears to
be perpetually out-of-date. This situation, of circular dependencies, is endemic to latex, and latexmk
in its current version works correctly with circular dependencies. It examines the contents of the files
(by use of an md5 checksum), and only does a remake when the file contents have actually changed.
Of course if you choose to write random data to the .nnd (or and .aux file, etc) that changes on each new
run, then you will have a problem. For real experts: See the %hash_cal_ignore_pattern if you have to
deal with such problems.
Glossaries can be dealt with similarly.
OLD METHOD OF DEFINING CUSTOM DEPENDENCIES
In previous versions of latexmk, the only method of defining custom dependencies was to directly
manipulate the table of custom dependencies. This is contained in the @cus_dep_list array. It is an
array of strings, and each string in the array has four items in it, each separated by a space, the from-
extension, the to-extension, the "must" item, and the name of the subroutine for the custom dependency.
These were all defined above.
An example of the old method of defining custom dependencies is as follows. It is the code in an RC file
to ensure automatic conversion of .fig files to .eps files:
push @cus_dep_list, "fig eps 0 fig2eps";
sub fig2eps {
system( "fig2dev -Lps \"$_[0].fig\" \"$_[0].eps\"" );
}
This method still works, and is equivalent to the earlier code using the add_cus_dep subroutine, except
that it doesn't delete any previous custom-dependency for the same conversion. So the new method is
preferable.
USING latexmk WITH make
This section is targeted only at advanced users who use the make program for complex projects, as for
software development, with the dependencies specified by a Makefile.
Now the basic task of latexmk is to run the appropriate programs to make a viewable version of a LaTeX
document. However, the usual make program is not suited to this purpose for at least two reasons. First
is that the use of LaTeX involves circular dependencies (e.g., via .aux files), and these cannot be
handled by the standard make program. Second is that in a large document the set of source files can
change quite frequently, particularly with included graphics files; in this situation keeping a Makefile
manually updated is inappropriate and error-prone, especially when the dependencies can be determined
automatically. Latexmk solves both of these problems robustly.
Thus for many standard LaTeX documents latexmk can be used by itself without the make program. In a
complex project it simply needs to be suitably configured. A standard configuration would be to define
custom dependencies to make graphics files from their source files (e.g., as created by the xfig
program). Custom dependencies are latexmk's equivalent of pattern rules in Makefiles.
Nevertheless there are projects for which a Makefile is appropriate, and it is useful to know how to use
latexmk from a Makefile. A typical example would be to generate documentation for a software project.
Potentially the interaction with the rest of the rules in the Makefile could be quite complicated, for
example if some of the source files for a LaTeX document are generated by the project's software.
In this section, I give a couple of examples of how latexmk can be usefully invoked from a Makefile. The
examples use specific features of current versions of GNU make, which is the default on both linux and
OS-X systems. They may need modifications for other versions of make.
The simplest method is simply to delegate all the relevant tasks to latexmk, as is suitable for a
straightforward LaTeX document. For this a suitable Makefile is like
.PHONY : FORCE_MAKE
all : try.pdf
%.pdf : %.tex FORCE_MAKE
latexmk -pdf -dvi- -ps- $<
(Note: the last line must be introduced by a tab for the Makefile to function correctly!) Naturally, if
making try.pdf from its associated LaTeX file try.tex were the only task to be performed, a direct use of
latexmk without a Makefile would normally be better. The benefit of using a Makefile for a LaTeX
document would be in a larger project, where lines such as the above would be only be a small part of a
larger Makefile.
The above example has a pattern rule for making a .pdf file from a .tex file, and it is defined to use
latexmk in the obvious way. There is a conventional default target named "all", with a prerequisite of
try.pdf. So when make is invoked, by default it makes try.pdf. The only complication is that there may
be many source files beyond try.tex, but these aren't specified in the Makefile, so changes in them will
not by themselves cause latexmk to be invoked. Instead, the pattern rule is equipped with a "phony"
prerequisite FORCE_MAKE; this has the effect of causing the rule to be always out-of-date, so that
latexmk is always run. It is latexmk that decides whether any action is needed, e.g., a rerun of
pdflatex. Effectively the Makefile delegates all decisions to latexmk, while make has no knowledge of
the list of source files except for primary LaTeX file for the document. If there are, for example,
graphics files to be made, these must be made by custom dependencies configured in latexmk.
But something better is needed in more complicated situations, for example, when the making of graphics
files needs to be specified by rules in the Makefile. To do this, one can use a Makefile like the
following:
TARGETS = document1.pdf document2.pdf
DEPS_DIR = .deps
LATEXMK = latexmk -recorder -use-make -deps \
-e 'warn qq(In Makefile, turn off custom dependencies\n);' \
-e '@cus_dep_list = ();' \
-e 'show_cus_dep();'
all : $(TARGETS)
$(foreach file,$(TARGETS),$(eval -include $(DEPS_DIR)/$(file)P))
$(DEPS_DIR) :
mkdir $@
%.pdf : %.tex
if [ ! -e $(DEPS_DIR) ]; then mkdir $(DEPS_DIR); fi
$(LATEXMK) -pdf -dvi- -ps- -deps-out=$(DEPS_DIR)/$@P $<
%.pdf : %.fig
fig2dev -Lpdf $< $@
(Again, the lines containing the commands for the rules should be started with tabs.) This example was
inspired by how GNU automake handles automatic dependency tracking of C source files.
After each run of latexmk, dependency information is put in a file in the .deps subdirectory. The
Makefile causes these dependency files to be read by make, which now has the full dependency information
for each target .pdf file. To make things less trivial it is specificed that two files document1.pdf and
document2.pdf are the targets. The dependency files are .deps/document1.pdfP and .deps/document2.pdfP.
There is now no need for the phony prerequisite for the rule to make .pdf files from .tex files. But I
have added a rule to make .pdf files from .fig files produced by the xfig program; these are commonly
used for graphics insertions in LaTeX documents. Latexmk is arranged to output a dependency file after
each run. It is given the -recorder option, which improves its detection of files generated during a run
of pdflatex; such files should not be in the dependency list. The -e options are used to turn off all
custom dependencies, and to document this. Instead the -use-make is used to delegate the making of
missing files to make itself.
Suppose in the LaTeX file there is a command \includegraphics{graph}, and an xfig file "graph.fig"
exists. On a first run, pdflatex reports a missing file, named "graph". Latexmk succeeds in making
"graph.pdf" by calling "make graph.pdf", and after completion of its work, it lists "fig.pdf" among the
dependents of the file latexmk is making. Then let "fig.fig" be updated, and then let make be run. Make
first remakes "fig.pdf", and only then reruns latexmk.
Thus we now have a method by which all the subsidiary processing is delegated to make.
SEE ALSO
latex(1), bibtex(1).
BUGS
Sometimes a viewer (gv) tries to read an updated .ps or .pdf file after its creation is started but
before the file is complete. Work around: manually refresh (or reopen) display. Or use one of the other
previewers and update methods.
(The following isn't really a bug, but concerns features of previewers.) Preview continuous mode only
works perfectly with certain previewers: Xdvi on UNIX/LINUX works for dvi files. Gv on UNIX/LINUX works
for both postscript and pdf. Ghostview on UNIX/LINUX needs a manual update (reopen); it views postscript
and pdf. Gsview under MS-Windows works for both postscript and pdf, but only reads the updated file when
its screen is refreshed. Acroread under UNIX/LINUX views pdf, but the file needs to be closed and
reopened to view an updated version. Under MS-Windows, acroread locks its input file and so the pdf file
cannot be updated. (Remedy: configure latexmk to use sumatrapdf instead.)
THANKS TO
Authors of previous versions. Many users with their feedback, and especially David Coppit (username
david at node coppit.org) who made many useful suggestions that contributed to version 3, and Herbert
Schulz. (Please note that the e-mail addresses are not written in their standard form to avoid being
harvested by worms and viruses.)
AUTHOR
Current version, by John Collins (username jcc8 at node psu.edu). (Version 4.41).
Released version can be obtained from CTAN: <http://www.ctan.org/tex-archive/support/latexmk/>, and from
the author's website <http://www.phys.psu.edu/~collins/software/latexmk/>.
Modifications and enhancements by Evan McLean (Version 2.0)
Original script called "go" by David J. Musliner (RCS Version 3.2)
1 January 2015 LATEXMK(1L)