NAME

       mstlink - check and debug link status and issues related to them

SYNOPSIS

       mstlink [OPTIONS]

DESCRIPTION

       The  mlxlink  tool is used to check and debug link status and issues related to them.  The
       tool can be  used  on  different  links  and  cables  (passive,  active,  transceiver  and
       backplane).

OPTIONS

       -h |--help
              : Display help message.

       -v |--version
              : Display version info.

       -d |--device
              <device>               : Perform operation for a specified mst device

       -p |--port
              <port_number>          : Port Number

       --port_type
              <port_type>            : Port Type [NETWORK(Default)/PCIE]

       --depth
              <depth>                : depth level of the DUT of some hierarchy (PCIE only)

       --pcie_index
              <pcie_index>           : PCIe index number (Internal domain index) (PCIE only)

       --node <node>                 : the node within each depth (PCIE only)

       --json : Print the output in json format

              QUERIES:

       --show_links
              : Show valid PCIe links (PCIE only)

       -m |--show_module
              : Show Module Info

       -c |--show_counters
              : Show Physical Counters and BER Info

       -e |--show_eye
              : Show Eye Opening Info

       --show_fec
              : Show FEC Capabilities

       --show_serdes_tx
              : Show Transmitter Info

       --show_device
              : General Device Info

       --show_ber_monitor
              : Show BER Monitor Info (not supported for HCA)

       --show_external_phy
              : Show External PHY Info

              COMMANDS:

       -a |--port_state <port_state>
              : Configure Port State [UP(up)/DN(down)/TG(toggle)]

       -s |--speeds
              <speeds>               : Configure Speeds [speed1,speed2,...]

       --link_mode_force
              : Configure Link Mode Force (Disable AN)

       -l |--loopback
              <loopback>               :   Configure   Loopback   Mode   [NO(no  loopback)/PH(phy
              loopback)/EX(external loopback)]

       -k |--fec
              <fec_override>                  :  Configure  FEC  [AU(Auto)/NF(No-FEC)/FC(FireCode
              FEC)/RS(RS-FEC)]

       --fec_speed
              <fec_speed>                 : Speed to Configure FEC [100G/50G/25G/...] (Default is
              Active Speed)

       --serdes_tx
              <params>               : Configure Transmitter Parameters [polarity,ob_tap0,...]

       --serdes_tx_lane <transmitter_lane>
              : Transmitter Lane to Set (Optional - Default All Lanes)

       --database
              : Save Transmitter Configuration for Current Speed Permanently (Optional)

       --test_mode
              <prbs_mode>                 :      Physical      Test      Mode       Configuration
              [EN(enable)/DS(disable)/TU(perform tuning)]

       --rx_prbs
              <rx_prbs_mode>              :  RX PRBS Mode [PRBS31(Default)/PRBS7/...] (Optional -
              Default PRBS31)

       --tx_prbs
              <tx_prbs_mode>             : TX PRBS Mode [PRBS31(Default)/PRBS7/...]  (Optional  -
              Default PRBS31)

       --rx_rate
              <rx_lane_rate>              :  RX Lane Rate [EDR(Default)/25G/10G/...]  (Optional -
              Default 25G)

       --tx_rate
              <tx_lane_rate>             : TX Lane Rate [EDR(Default)/25G/10G/...]   (Optional  -
              Default 25G)

       -b |--ber_collect <csv_file>
              : Port Extended Information Collection [CSV File]

       --ber_limit
              <limit_criteria>            :  BER  Limit  Criteria [Nominal(Default)/Corner/Drift]
              (Optional - Default Nominal)

       --iteration
              <iteration>                : Iteration Number of BER Collection

       --pc   : Clear Counters

       --set_external_phy
              : Set External PHY (not supported for HCA)

       --twisted_pair_force_mode <twisted_pair_force_mode>
              : Twisted Pair Force Mode [MA(Master)/SL(Slave)]

EXAMPLES

       get info of <device>, <port_number>
              :

              mstlink -d <device> -p <port_number>

              get info of <device>, <port_number> and BER Counters:

              mstlink -d <device> -p <port_number> -c

              get info of <device>, <port_number> and Transmitter Parameters:

              mstlink -d <device> -p <port_number> --show_serdes_tx

       Configure Port State
              :

              mstlink -d <device> -p <port_number> --port_state UP

       Configure Port Speeds
              :

              mstlink -d <device> -p <port_number> --speeds 25G,50G,100G

       Configure FEC
              :

              mstlink -d <device> -p <port_number> --fec RS

       Configure Port for Physical Test Mode
              :

              mstlink -d <device> -p <port_number> --test_mode EN (--rx_prbs PRBS31 --rx_rate 25G
              --tx_prbs PRBS7 --tx_rate 10G)

       Perform PRBS Tuning
              :

              mstlink -d <device> -p <port_number> --test_mode TU

              Configure Transmitter Parameters (on lane, to database):

              mstlink  -d <device> -p <port_number> (--serdes_tx_lane <lane number>) (--database)
              \
                --serdes_tx <polarity>,<ob_tap0>,<ob_tap1>,<ob_tap2>,<ob_bias>,<ob_preemp_mode>

SEE ALSO

       The full documentation for mstlink, is maintained as a Texinfo manual.  If  the  info  and
       mstlink, programs are properly installed at your site, the command

              info mstlink,

       should give you access to the complete manual.

mstlink, mstflint 4.13.3, built on Dec 30 December:20193. Git SHA Hash: N/A           MSTLINK,(1)