Provided by: gmt-common_5.4.3+dfsg-1_all 
NAME
originator - Associate seamounts with nearest hotspot point sources
SYNOPSIS
originator [ tables ] -E[+]rotfile
-F[+]hs_file [ -Dd_km ] [ -L[flag] ] [ -Nupper_age ] [ -Qr/t ] [ -S[n_hs] ] [ -T ] [ -V[level] ]
[ -Wmaxdist ] [ -Z ] [ -bibinary ] [ -dinodata ] [ -eregexp ] [ -hheaders ] [ -iflags ] [ -:[i|o] ]
Note: No space is allowed between the option flag and the associated arguments.
DESCRIPTION
originator reads (longitude, latitude, height, radius, crustal_age) records from tables [or standard
input] and uses the given Absolute Plate Motion (APM) stage or total reconstruction rotation file and the
list of hotspot locations to determine the most likely origin (hotspot) for each seamount. It does so by
calculating flowlines back in time and determining the closest approach to all hotspots. The output
consists of the input records with four additional fields added for each of the n_hs closest hotspots.
The four fields are the hotspot id (e.g., HWI), the stage id of the flowline segment that came closest,
the pseudo-age of the seamount, and the closest distance to the hotspot (in km). See option -: on how to
read (latitude, longitude,height, radius, crustal_age) files.
REQUIRED ARGUMENTS
-Erotfile
Give file with rotation parameters. This file must contain one record for each rotation; each
record must be of the following format:
lon lat tstart [tstop] angle [ khat a b c d e f g df ]
where tstart and tstop are in Myr and lon lat angle are in degrees. tstart and tstop are the ages
of the old and young ends of a stage. If tstop is not present in the record then a total
reconstruction rotation is expected and tstop is implicitly set to 0 and should not be specified
for any of the records in the file. If a covariance matrix C for the rotation is available it must
be specified in a format using the nine optional terms listed in brackets. Here, C = (g/khat)*[ a
b d; b c e; d e f ] which shows C made up of three row vectors. If the degrees of freedom (df) in
fitting the rotation is 0 or not given it is set to 10000. Blank lines and records whose first
column contains # will be ignored. You may prepend a leading + to the filename to indicate you
wish to invert the rotations. Alternatively, give the filename composed of two plate IDs
separated by a hyphen (e.g., PAC-MBL) and we will instead extract that rotation from the GPlates
rotation database. We return an error if the rotation cannot be found. Prepend + if you want to
invert the rotations prior to use.
-Ffile Give file with hotspot locations. This file must contain one record for each hotspot to be
considered; each record must be of the following format:
lon lat hs_abbrev hs_id r t_off t_on create fit plot name
E.g., for Hawaii this may look like
205 20 HWI 1 25 0 90 Y Y Y Hawaii
Most applications only need the first 4 columns which thus represents the minimal hotspot
information record type. The abbreviation may be maximum 3 characters long. The id must be an
integer from 1-32. The positional uncertainty of the hotspot is given by r (in km). The t_off and
t_on variables are used to indicate the active time-span of the hotspot. The create, fit, and plot
indicators are either Y or N and are used by some programs to indicate if the hotspot is included
in the ID-grids used to determine rotations, if the hotspot chain will be used to determine
rotations, and if the hotspot should be included in various plots. The name is a 32-character
maximum text string with the full hotspot name. Blank lines and records whose first column
contains # will be ignored. Prepend + if we should look for hotspot drift tables whose name must
be hs_abbrev_drift.txt. Such files may be located in the current directory, the same directory as
hs_file, or in the directories pointed to by GMT_DATADIR. If found then we interpolate to get
hotspot location as a function of time [fixed].
OPTIONAL ARGUMENTS
table One or more ASCII (or binary, see -bi[ncols][type]) data table file(s) holding a number of data
columns. If no tables are given then we read from standard input.
-Dd_km Sets the flowline sampling interval in km. [Default is 5].
-L[flag]
Output closest approach for nearest hotspot only (ignores -S). Choose -Lt for (time, dist, z)
[Default], -Lw for (omega, dist, z), and -Ll for (lon, lat, time, dist, z). Normally, dist is in
km; use upper case modifiers TWL to get dist in spherical degrees.
-Nupper_age
Set the maximum age to extend the oldest stage back in time [no extension].
-Qr/t Input files only has (x,y,z); specify constant values for r,t that will be implied for each
record.
-S[n_hs]
Set the number of closest hotspots to report [Default is 1].
-T Truncate seamount ages exceeding the upper age set with -N [no truncation].
-V[level] (more …)
Select verbosity level [c].
-Wmaxdist
Only report those seamounts whose flowlines came within maxdist to any hotspot [Default reports
all seamounts].
-Z Use the hotspot ID number rather than the name tag in output records.
-bi[ncols][t] (more …)
Select native binary input. [Default is 5 input columns].
-dinodata (more …)
Replace input columns that equal nodata with NaN.
-e[~]”pattern” | -e[~]/regexp/[i] (more …)
Only accept data records that match the given pattern.
-V[level] (more …)
Select verbosity level [c].
-icols[+l][+sscale][+ooffset][,…] (more …)
Select input columns and transformations (0 is first column).
-:[i|o] (more …)
Swap 1st and 2nd column on input and/or output.
-^ or just -
Print a short message about the syntax of the command, then exits (NOTE: on Windows just use -).
-+ or just +
Print an extensive usage (help) message, including the explanation of any module-specific option
(but not the GMT common options), then exits.
-? or no arguments
Print a complete usage (help) message, including the explanation of all options, then exits.
GEODETIC VERSUS GEOCENTRIC COORDIINATES
All spherical rotations are applied to geocentric coordinates. This means that incoming data points and
grids are considered to represent geodetic coordinates and must first be converted to geocentric
coordinates. Rotations are then applied, and the final reconstructed points are converted back to
geodetic coordinates. This default behavior can be bypassed if the ellipsoid setting PROJ_ELLIPSOID is
changed to Sphere.
EXAMPLES
To find the likely (hotspot) origins of the seamounts represented by the (x,y,z,r,tc) points in the file
seamounts.d, using the DC85.d Euler poles and the pac_hs.d list of possible hotspots, and report the 2
most likely hotspot candidates for each seamount, run
gmt originator seamounts.d -S2 -EDC85.d -Fpac_hs.d > origins.d
To determine the predicted age of a seamount, distances to the closest hotspot, and echo the observed age
given its location, observed age, and a rotation model, try
echo "1.55 -8.43 52.3" | gmt originator -FONeill_2005_hotspots.txt \
-EOMS2005_APM_fixed.txt -Q1/120 -Lt
where 52.3 Ma is observed age. The output is 70 -95.486 52.3. To repeat the same exercise with a moving
hotspot model, try
echo "1.55 -8.43 52.3" | gmt originator -F+ONeill_2005_hotspots.txt \
-EOMS2005_APM_smooth.txt -Q1/120 -Lt
Now the output is 80 -213.135 52.3. Negative distances means the closest approach was east of the
hotspot.
NOTES
GMT distributes the EarthByte rotation model Global_EarthByte_230-0Ma_GK07_AREPS.rot. To use an
alternate rotation file, create an environmental parameters named GPLATES_ROTATIONS that points to an
alternate rotation file.
SEE ALSO
gmt, grdrotater, grdspotter, project, mapproject, backtracker, gmtpmodeler, grdpmodeler, grdrotater,
hotspotter
REFERENCES
Wessel, P., 1999, “Hotspotting” tools released, EOS Trans. AGU, 80 (29), p. 319.
COPYRIGHT
2018, P. Wessel, W. H. F. Smith, R. Scharroo, J. Luis, and F. Wobbe
5.4.3 Jan 03, 2018 ORIGINATOR(1gmt)