Provided by: linux-tools-common_4.15.0-213.224_all bug

NAME

       perf-list - List all symbolic event types

SYNOPSIS

       perf list [--no-desc] [--long-desc]
                   [hw|sw|cache|tracepoint|pmu|sdt|metric|metricgroup|event_glob]

DESCRIPTION

       This command displays the symbolic event types which can be selected in the various perf
       commands with the -e option.

OPTIONS

       --no-desc
           Don’t print descriptions.

       -v, --long-desc
           Print longer event descriptions.

       --details
           Print how named events are resolved internally into perf events, and also any extra
           expressions computed by perf stat.

EVENT MODIFIERS

       Events can optionally have a modifier by appending a colon and one or more modifiers.
       Modifiers allow the user to restrict the events to be counted. The following modifiers
       exist:

           u - user-space counting
           k - kernel counting
           h - hypervisor counting
           I - non idle counting
           G - guest counting (in KVM guests)
           H - host counting (not in KVM guests)
           p - precise level
           P - use maximum detected precise level
           S - read sample value (PERF_SAMPLE_READ)
           D - pin the event to the PMU
           W - group is weak and will fallback to non-group if not schedulable,
               only supported in 'perf stat' for now.

       The p modifier can be used for specifying how precise the instruction address should be.
       The p modifier can be specified multiple times:

           0 - SAMPLE_IP can have arbitrary skid
           1 - SAMPLE_IP must have constant skid
           2 - SAMPLE_IP requested to have 0 skid
           3 - SAMPLE_IP must have 0 skid, or uses randomization to avoid
               sample shadowing effects.

       For Intel systems precise event sampling is implemented with PEBS which supports up to
       precise-level 2, and precise level 3 for some special cases

       On AMD systems it is implemented using IBS (up to precise-level 2). The precise modifier
       works with event types 0x76 (cpu-cycles, CPU clocks not halted) and 0xC1 (micro-ops
       retired). Both events map to IBS execution sampling (IBS op) with the IBS Op Counter
       Control bit (IbsOpCntCtl) set respectively (see AMD64 Architecture Programmer’s Manual
       Volume 2: System Programming, 13.3 Instruction-Based Sampling). Examples to use IBS:

           perf record -a -e cpu-cycles:p ...    # use ibs op counting cycles
           perf record -a -e r076:p ...          # same as -e cpu-cycles:p
           perf record -a -e r0C1:p ...          # use ibs op counting micro-ops

RAW HARDWARE EVENT DESCRIPTOR

       Even when an event is not available in a symbolic form within perf right now, it can be
       encoded in a per processor specific way.

       For instance For x86 CPUs NNN represents the raw register encoding with the layout of
       IA32_PERFEVTSELx MSRs (see [Intel® 64 and IA-32 Architectures Software Developer’s Manual
       Volume 3B: System Programming Guide] Figure 30-1 Layout of IA32_PERFEVTSELx MSRs) or AMD’s
       PerfEvtSeln (see [AMD64 Architecture Programmer’s Manual Volume 2: System Programming],
       Page 344, Figure 13-7 Performance Event-Select Register (PerfEvtSeln)).

       Note: Only the following bit fields can be set in x86 counter registers: event, umask,
       edge, inv, cmask. Esp. guest/host only and OS/user mode flags must be setup using EVENT
       MODIFIERS.

       Example:

       If the Intel docs for a QM720 Core i7 describe an event as:

           Event  Umask  Event Mask
           Num.   Value  Mnemonic    Description                        Comment

           A8H      01H  LSD.UOPS    Counts the number of micro-ops     Use cmask=1 and
                                     delivered by loop stream detector  invert to count
                                                                        cycles

       raw encoding of 0x1A8 can be used:

           perf stat -e r1a8 -a sleep 1
           perf record -e r1a8 ...

       You should refer to the processor specific documentation for getting these details. Some
       of them are referenced in the SEE ALSO section below.

ARBITRARY PMUS

       perf also supports an extended syntax for specifying raw parameters to PMUs. Using this
       typically requires looking up the specific event in the CPU vendor specific documentation.

       The available PMUs and their raw parameters can be listed with

           ls /sys/devices/*/format

       For example the raw event "LSD.UOPS" core pmu event above could be specified as

           perf stat -e cpu/event=0xa8,umask=0x1,name=LSD.UOPS_CYCLES,cmask=1/ ...

PER SOCKET PMUS

       Some PMUs are not associated with a core, but with a whole CPU socket. Events on these
       PMUs generally cannot be sampled, but only counted globally with perf stat -a. They can be
       bound to one logical CPU, but will measure all the CPUs in the same socket.

       This example measures memory bandwidth every second on the first memory controller on
       socket 0 of a Intel Xeon system

           perf stat -C 0 -a uncore_imc_0/cas_count_read/,uncore_imc_0/cas_count_write/ -I 1000 ...

       Each memory controller has its own PMU. Measuring the complete system bandwidth would
       require specifying all imc PMUs (see perf list output), and adding the values together.

       This example measures the combined core power every second

           perf stat -I 1000 -e power/energy-cores/  -a

ACCESS RESTRICTIONS

       For non root users generally only context switched PMU events are available. This is
       normally only the events in the cpu PMU, the predefined events like cycles and
       instructions and some software events.

       Other PMUs and global measurements are normally root only. Some event qualifiers, such as
       "any", are also root only.

       This can be overriden by setting the kernel.perf_event_paranoid sysctl to -1, which allows
       non root to use these events.

       For accessing trace point events perf needs to have read access to
       /sys/kernel/debug/tracing, even when perf_event_paranoid is in a relaxed setting.

TRACING

       Some PMUs control advanced hardware tracing capabilities, such as Intel PT, that allows
       low overhead execution tracing. These are described in a separate intel-pt.txt document.

PARAMETERIZED EVENTS

       Some pmu events listed by perf-list will be displayed with ? in them. For example:

           hv_gpci/dtbp_ptitc,phys_processor_idx=?/

       This means that when provided as an event, a value for ? must also be supplied. For
       example:

           perf stat -C 0 -e 'hv_gpci/dtbp_ptitc,phys_processor_idx=0x2/' ...

EVENT GROUPS

       Perf supports time based multiplexing of events, when the number of events active exceeds
       the number of hardware performance counters. Multiplexing can cause measurement errors
       when the workload changes its execution profile.

       When metrics are computed using formulas from event counts, it is useful to ensure some
       events are always measured together as a group to minimize multiplexing errors. Event
       groups can be specified using { }.

           perf stat -e '{instructions,cycles}' ...

       The number of available performance counters depend on the CPU. A group cannot contain
       more events than available counters. For example Intel Core CPUs typically have four
       generic performance counters for the core, plus three fixed counters for instructions,
       cycles and ref-cycles. Some special events have restrictions on which counter they can
       schedule, and may not support multiple instances in a single group. When too many events
       are specified in the group some of them will not be measured.

       Globally pinned events can limit the number of counters available for other groups. On x86
       systems, the NMI watchdog pins a counter by default. The nmi watchdog can be disabled as
       root with

           echo 0 > /proc/sys/kernel/nmi_watchdog

       Events from multiple different PMUs cannot be mixed in a group, with some exceptions for
       software events.

LEADER SAMPLING

       perf also supports group leader sampling using the :S specifier.

           perf record -e '{cycles,instructions}:S' ...
           perf report --group

       Normally all events in a event group sample, but with :S only the first event (the leader)
       samples, and it only reads the values of the other events in the group.

OPTIONS

       Without options all known events will be listed.

       To limit the list use:

        1. hw or hardware to list hardware events such as cache-misses, etc.

        2. sw or software to list software events such as context switches, etc.

        3. cache or hwcache to list hardware cache events such as L1-dcache-loads, etc.

        4. tracepoint to list all tracepoint events, alternatively use subsys_glob:event_glob to
           filter by tracepoint subsystems such as sched, block, etc.

        5. pmu to print the kernel supplied PMU events.

        6. sdt to list all Statically Defined Tracepoint events.

        7. metric to list metrics

        8. metricgroup to list metricgroups with metrics.

        9. If none of the above is matched, it will apply the supplied glob to all events,
           printing the ones that match.

       10. As a last resort, it will do a substring search in all event names.

       One or more types can be used at the same time, listing the events for the types
       specified.

       Support raw format:

        1. --raw-dump, shows the raw-dump of all the events.

        2. --raw-dump [hw|sw|cache|tracepoint|pmu|event_glob], shows the raw-dump of a certain
           kind of events.

SEE ALSO

       perf-stat(1), perf-top(1), perf-record(1), Intel® 64 and IA-32 Architectures Software
       Developer’s Manual Volume 3B: System Programming Guide[1], AMD64 Architecture Programmer’s
       Manual Volume 2: System Programming[2]

NOTES

        1. Intel® 64 and IA-32 Architectures Software Developer’s Manual Volume 3B: System
           Programming Guide
           http://www.intel.com/sdm/

        2. AMD64 Architecture Programmer’s Manual Volume 2: System Programming
           http://support.amd.com/us/Processor_TechDocs/24593_APM_v2.pdf