Provided by: slurm-client_17.11.2-1build1_amd64 
NAME
sacct - displays accounting data for all jobs and job steps in the Slurm job accounting
log or Slurm database
SYNOPSIS
sacct [OPTIONS...]
DESCRIPTION
Accounting information for jobs invoked with Slurm are either logged in the job accounting
log file or saved to the Slurm database.
The sacct command displays job accounting data stored in the job accounting log file or
Slurm database in a variety of forms for your analysis. The sacct command displays
information on jobs, job steps, status, and exitcodes by default. You can tailor the
output with the use of the --format= option to specify the fields to be shown.
For the root user, the sacct command displays job accounting data for all users, although
there are options to filter the output to report only the jobs from a specified user or
group.
For the non-root user, the sacct command limits the display of job accounting data to jobs
that were launched with their own user identifier (UID) by default. Data for other users
can be displayed with the --allusers, --user, or --uid options.
Note: If designated, the slurmdbd.conf option PrivateData may further
restrict the accounting data visible to users which are not SlurmUser, root, or a
user with AdminLevel=Admin. See the slurmdbd.conf man page for additional details
on restricting access to accounting data.
Note: If the AccountingStorageType is set to "accounting_storage/filetxt",
space characters embedded within account names, job names, and step names will be
replaced by underscores. If account names with embedded spaces are needed, it is
recommended that a database type of accounting storage be configured.
Note: The content's of Slurm's database are maintained in lower case. This may
result in some sacct output differing from that of other Slurm commands.
Note: Much of the data reported by sacct has been generated by
the wait3() and getrusage() system calls. Some systems gather and report incomplete
information for these calls; sacct reports values of 0 for this missing data. See
your systems getrusage (3) man page for information about which data are actually
available on your system.
Elapsed time fields are presented as [days-]hours:minutes:seconds[.microseconds].
Only 'CPU' fields will ever have microseconds.
The default input file is the file named in the AccountingStorageLoc parameter in
slurm.conf.
OPTIONS
-a, --allusers
Displays all users jobs when run by user root or if PrivateData is not
configured to jobs. Otherwise display the current user's jobs
-A account_list , --accounts=account_list
Displays jobs when a comma separated list of accounts are given as the argument.
-b, --brief
Displays a brief listing, which includes the following data:
jobid
status
exitcode
-c, --completion
Use job completion data instead of job accounting. The JobCompType parameter in
the slurm.conf file must be defined to a non-none option. Does not support
federated cluster information (local data only).
--delimiter=characters
ASCII characters used to separate the fields when specifying the -p or -P
options. The default delimiter is a '|'. This options is ignored if -p or -P
options are not specified.
-D, --duplicates
If Slurm job ids are reset, some job numbers will probably appear more than once
in the accounting log file but refer to different jobs. Such jobs can be
distinguished by the "submit" time stamp in the data records.
When data for specific jobs are requested with the --jobs option, sacct returns
the most recent job with that number. This behavior can be overridden by
specifying --duplicates, in which case all records that match the selection
criteria will be returned.
NOTE: Revoked federated sibling jobs are hidden unless the --duplicates option
is specified.
-e, --helpformat
Print a list of fields that can be specified with the --format option.
Fields available:
Account AdminComment AllocCPUS AllocGRES
AllocNodes AllocTRES AssocID AveCPU
AveCPUFreq AveDiskRead AveDiskWrite AvePages
AveRSS AveVMSize BlockID Cluster
Comment ConsumedEnergy ConsumedEnergyRaw CPUTime
CPUTimeRAW DerivedExitCode Elapsed ElapsedRaw
Eligible End ExitCode GID
Group JobID JobIDRaw JobName
Layout MaxDiskRead MaxDiskReadNode MaxDiskReadTask
MaxDiskWrite MaxDiskWriteNode MaxDiskWriteTask MaxPages
MaxPagesNode MaxPagesTask MaxRSS MaxRSSNode
MaxRSSTask MaxVMSize MaxVMSizeNode MaxVMSizeTask
McsLabel MinCPU MinCPUNode MinCPUTask
NCPUS NNodes NodeList NTasks
Priority Partition QOS QOSRAW
ReqCPUFreq ReqCPUFreqMin ReqCPUFreqMax ReqCPUFreqGov
ReqCPUS ReqGRES ReqMem ReqNodes
ReqTRES Reservation ReservationId Reserved
ResvCPU ResvCPURAW Start State
Submit Suspended SystemCPU Timelimit
TotalCPU UID User UserCPU
WCKey WCKeyID WorkDir
The section titled "Job Accounting Fields" describes these fields.
-E end_time, --endtime=end_time
Select jobs in any state before the specified time. If states are given with
the -s option return jobs in this state before this period.
Valid time formats are...
HH:MM[:SS] [AM|PM]
MMDD[YY] or MM/DD[/YY] or MM.DD[.YY]
MM/DD[/YY]-HH:MM[:SS]
YYYY-MM-DD[THH:MM[:SS]]
--federation
Show jobs from the federation if a member of one.
-f file, --file=file
Causes the sacct command to read job accounting data from the named file instead
of the current Slurm job accounting log file. Only applicable when running the
filetxt plugin.
-g gid_list, --gid=gid_list --group=group_list
Displays the statistics only for the jobs started with the GID or the GROUP
specified by the gid_list or thegroup_list operand, which is a comma-separated
list. Space characters are not allowed. Default is no restrictions..
-h, --help
Displays a general help message.
-i, --nnodes=N
Return jobs which ran on this many nodes (N = min[-max])
-j job(.step) , --jobs=job(.step)
Displays information about the specified job(.step) or list of job(.step)s.
The job(.step) parameter is a comma-separated list of jobs. Space characters
are not permitted in this list. NOTE: A step id of 'batch' will display the
information about the batch step. The batch step information is only available
after the batch job is complete unlike regular steps which are available when
they start.
The default is to display information on all jobs.
-k, --timelimit-min
Only send data about jobs with this timelimit. If used with timelimit_max this
will be the minimum timelimit of the range. Default is no restriction.
-K, --timelimit-max
Ignored by itself, but if timelimit_min is set this will be the maximum
timelimit of the range. Default is no restriction.
--local Show only jobs local to this cluster. Ignore other clusters in this federation
(if any). Overrides --federation.
-l, --long
Equivalent to specifying:
--format=jobid,jobname,partition,maxvmsize,maxvmsizenode,maxvmsizetask,
avevmsize,maxrss,maxrssnode,maxrsstask,averss,maxpages,maxpagesnode,
maxpagestask,avepages,mincpu,mincpunode,mincputask,avecpu,ntasks,
alloccpus,elapsed,state,exitcode,maxdiskread,maxdiskreadnode,maxdiskreadtask,
avediskread,maxdiskwrite,maxdiskwritenode,maxdiskwritetask,avediskwrite,
allocgres,reqgres,avecpufreq,reqcpufreqmin,reqcpufreqmax,reqcpufreqgov
-L, --allclusters
Display jobs ran on all clusters. By default, only jobs ran on the cluster from
where sacct is called are displayed.
-M cluster_list, --clusters=cluster_list
Displays the statistics only for the jobs started on the clusters specified by
the cluster_list operand, which is a comma-separated list of clusters. Space
characters are not allowed in the cluster_list. A value of 'all' will query to
run on all clusters. The default is current cluster you are executing the sacct
command on or all clusters in the federation when executed on a federated
cluster. This option implicitly sets the --local option.
-n, --noheader
No heading will be added to the output. The default action is to display a
header.
--noconvert
Don't convert units from their original type (e.g. 2048M won't be converted to
2G).
-N node_list, --nodelist=node_list
Display jobs that ran on any of these node(s). node_list can be a ranged
string.
--name=jobname_list
Display jobs that have any of these name(s).
-o, --format
Comma separated list of fields. (use "--helpformat" for a list of available
fields).
NOTE: When using the format option for listing various fields you can put a
%NUMBER afterwards to specify how many characters should be printed.
e.g. format=name%30 will print 30 characters of field name right justified. A
%-30 will print 30 characters left justified.
When set, the SACCT_FORMAT environment variable will override the default
format. For example:
SACCT_FORMAT="jobid,user,account,cluster"
-p, --parsable
output will be '|' delimited with a '|' at the end
-P, --parsable2
output will be '|' delimited without a '|' at the end
-q, --qos Only send data about jobs using these qos. Default is all.
-r, --partition
Comma separated list of partitions to select jobs and job steps from. The
default is all partitions.
-s state_list , --state=state_list
Selects jobs based on their state during the time period given. Unless
otherwise specified, the start and end time will be the current time when the
--state option is specified and only currently running jobs can be displayed. A
start and/or end time must be specified to view information about jobs not
currently running. The following state designators are valid and multiple state
names may be specified using comma separators. Either the short or long form of
the state name may be used (e.g. CA or CANCELLED) and the name is case
insensitive (e.g. ca and CA both work).
BF BOOT_FAIL Job terminated due to launch failure, typically due to a
hardware failure (e.g. unable to boot the node or block and
the job can not be requeued).
CA CANCELLED Job was explicitly cancelled by the user or system
administrator. The job may or may not have been initiated.
CD COMPLETED Job has terminated all processes on all nodes with an exit
code of zero.
CF CONFIGURING Job has been allocated resources, but are waiting for them
to become ready for use (e.g. booting).
CG COMPLETING Job is in the process of completing. Some processes on some
nodes may still be active.
DL DEADLINE Job missed its deadline.
F FAILED Job terminated with non-zero exit code or other failure
condition.
NF NODE_FAIL Job terminated due to failure of one or more allocated
nodes.
PD PENDING Job is awaiting resource allocation. Note for a job to be
selected in this state it must have "EligibleTime" in the
requested time interval or different from "Unknown". The
"EligibleTime" is displayed by the "scontrol show job"
command. For example jobs submitted with the "--hold"
option will have "EligibleTime=Unknown" as they are pending
indefinitely.
PR PREEMPTED Job terminated due to preemption.
R RUNNING Job currently has an allocation.
RS RESIZING Job is about to change size.
S SUSPENDED Job has an allocation, but execution has been suspended.
TO TIMEOUT Job terminated upon reaching its time limit.
The state_list operand is a comma-separated list of these state designators.
Space characters are not allowed in the state_list NOTE: When specifying states
and no start time is given the default starttime is 'now'. .
-S, --starttime
Select jobs in any state after the specified time. Default is 00:00:00 of the
current day, unless '-s' is set then the default is 'now'. If states are given
with the '-s' option then only jobs in this state at this time will be returned.
Valid time formats are...
HH:MM[:SS] [AM|PM]
MMDD[YY] or MM/DD[/YY] or MM.DD[.YY]
MM/DD[/YY]-HH:MM[:SS]
YYYY-MM-DD[THH:MM[:SS]]
-T, --truncate
Truncate time. So if a job started before --starttime the start time would be
truncated to --starttime. The same for end time and --endtime.
-u uid_list, --uid=uid_list, --user=user_list
Use this comma separated list of uids or user names to select jobs to display.
By default, the running user's uid is used.
--units=[KMGTP]
Display values in specified unit type. Takes precedence over --noconvert option.
--usage Display a command usage summary.
-v, --verbose
Primarily for debugging purposes, report the state of various variables during
processing.
-V, --version
Print version.
-W wckey_list, --wckeys=wckey_list
Displays the statistics only for the jobs started on the wckeys specified by the
wckey_list operand, which is a comma-separated list of wckey names. Space
characters are not allowed in the wckey_list. Default is all wckeys.
-x associd_list, --associations=assoc_list
Displays the statistics only for the jobs running under the association ids
specified by the assoc_list operand, which is a comma-separated list of
association ids. Space characters are not allowed in the assoc_list. Default is
all associations.
-X, --allocations
Only show cumulative statistics for each job, not the intermediate steps.
Job Accounting Fields
The following describes each job accounting field:
ALL Print all fields listed below.
AllocCPUs Count of allocated CPUs. Equivalent to NCPUS.
AllocGRES Names and counts of generic resources allocated.
AllocNodes
Number of nodes allocated to the job/step. 0 if the job is pending.
AllocTres Trackable resources. These are the resources allocated to the job/step
after the job started running. For pending jobs this should be blank.
For more details see AccountingStorageTRES in slurm.conf.
Account Account the job ran under.
AssocID Reference to the association of user, account and cluster.
AveCPU Average (system + user) CPU time of all tasks in job.
AveCPUFreq
Average weighted CPU frequency of all tasks in job, in kHz.
AveDiskRead
Average number of bytes read by all tasks in job.
AveDiskWrite
Average number of bytes written by all tasks in job.
AvePages Average number of page faults of all tasks in job.
AveRSS Average resident set size of all tasks in job.
AveVMSize Average Virtual Memory size of all tasks in job.
BlockID Block ID, applicable to BlueGene computers only.
Cluster Cluster name.
Comment The job's comment string when the AccountingStoreJobComment parameter in
the slurm.conf file is set (or defaults) to YES. The Comment string can
be modified by invoking sacctmgr modify job or the specialized
sjobexitmod command.
ConsumedEnergy
Total energy consumed by all tasks in job, in joules. Note: Only in case
of exclusive job allocation this value reflects the jobs' real energy
consumption.
CPUTime Formatted (Elapsed time * CPU) count used by a job or step.
CPUTimeRAW
Unlike above non formatted (Elapsed time * CPU) count for a job or step.
Units are cpu-seconds.
DerivedExitCode
The highest exit code returned by the job's job steps (srun invocations).
Following the colon is the signal that caused the process to terminate if
it was terminated by a signal. The DerivedExitCode can be modified by
invoking sacctmgr modify job or the specialized sjobexitmod command.
Elapsed The jobs elapsed time.
The format of this fields output is as follows:
[DD-[HH:]]MM:SS
as defined by the following:
DD days
hh hours
mm minutes
ss seconds
Eligible When the job became eligible to run.
End Termination time of the job. Format output is, YYYY-MM-DDTHH:MM:SS,
unless changed through the SLURM_TIME_FORMAT environment variable.
ExitCode The exit code returned by the job script or salloc, typically as set by
the exit() function. Following the colon is the signal that caused the
process to terminate if it was terminated by a signal.
GID The group identifier of the user who ran the job.
Group The group name of the user who ran the job.
JobID The number of the job or job step. It is in the form: job.jobstep.
JobIDRaw In case of job array print the JobId instead of the ArrayJobId. For non
job arrays the output is the JobId in the format job.jobstep.
JobName The name of the job or job step. The slurm_accounting.log file is a space
delimited file. Because of this if a space is used in the jobname an
underscore is substituted for the space before the record is written to
the accounting file. So when the jobname is displayed by sacct the
jobname that had a space in it will now have an underscore in place of
the space.
Layout What the layout of a step was when it was running. This can be used to
give you an idea of which node ran which rank in your job.
MaxDiskRead
Maximum number of bytes read by all tasks in job.
MaxDiskReadNode
The node on which the maxdiskread occurred.
MaxDiskReadTask
The task ID where the maxdiskread occurred.
MaxDiskWrite
Maximum number of bytes written by all tasks in job.
MaxDiskWriteNode
The node on which the maxdiskwrite occurred.
MaxDiskWriteTask
The task ID where the maxdiskwrite occurred.
MaxPages Maximum number of page faults of all tasks in job.
MaxPagesNode
The node on which the maxpages occurred.
MaxPagesTask
The task ID where the maxpages occurred.
MaxRSS Maximum resident set size of all tasks in job.
MaxRSSNode
The node on which the maxrss occurred.
MaxRSSTask
The task ID where the maxrss occurred.
MaxVMSize Maximum Virtual Memory size of all tasks in job.
MaxVMSizeNode
The node on which the maxvmsize occurred.
MaxVMSizeTask
The task ID where the maxvmsize occurred.
MinCPU Minimum (system + user) CPU time of all tasks in job.
MinCPUNode
The node on which the mincpu occurred.
MinCPUTask
The task ID where the mincpu occurred.
NCPUS Count of allocated CPUs. Equivalent to AllocCPUS
Total number of CPUs allocated to the job.
NodeList List of nodes in job/step.
NNodes Number of nodes in a job or step. If the job is running, or ran, this
count will be the number allocated, else the number will be the number
requested.
NTasks Total number of tasks in a job or step.
Priority Slurm priority.
Partition Identifies the partition on which the job ran.
QOS Name of Quality of Service.
QOSRAW Id of Quality of Service.
ReqCPUFreq
Requested CPU frequency for the step, in kHz. Note: This value applies
only to a job step. No value is reported for the job.
ReqCPUS Required CPUs.
ReqGRES Names and counts of generic resources requested.
ReqMem Minimum required memory for the job, in MB. A 'c' at the end of number
represents Memory Per CPU, a 'n' represents Memory Per Node. Note: This
value is only from the job allocation, not the step.
ReqNodes Requested minimum Node count for the job/step.
ReqTres Trackable resources. These are the minimum resource counts requested by
the job/step at submission time. For more details see
AccountingStorageTRES in slurm.conf.
Reservation
Reservation Name.
ReservationId
Reservation Id.
Reserved How much wall clock time was used as reserved time for this job. This is
derived from how long a job was waiting from eligible time to when it
actually started.
ResvCPU Formatted time for how long (cpu secs) a job was reserved for.
ResvCPURAW
Reserved CPUs in second format, not formatted.
Start Initiation time of the job in the same format as End.
State Displays the job status, or state.
Output can be RUNNING, RESIZING, SUSPENDED, COMPLETED, CANCELLED, FAILED,
TIMEOUT, PREEMPTED, BOOT_FAIL, DEADLINE or NODE_FAIL. If more
information is available on the job state than will fit into the current
field width (for example, the uid that CANCELLED a job) the state will be
followed by a "+". You can increase the size of the displayed state
using the "%NUMBER" format modifier described earlier.
NOTE: The RUNNING state will return suspended jobs as well. In order to
print suspended jobs you must request SUSPENDED at a different call from
RUNNING.
NOTE: The RUNNING state will return any jobs completed (cancelled or
otherwise) in the time period requested as the job was also RUNNING
durning that time. If you are only looking for job that finished please
choose the appropriate state(s) without the RUNNING state.
Submit The time and date stamp (in Universal Time Coordinated, UTC) the job was
submitted. The format of the output is identical to that of the End
field.
NOTE: If a job is requeued, the submit time is reset. To obtain the
original submit time it is necessary to use the -D or --duplicate option
to display all duplicate entries for a job.
Suspended How long the job was suspended for.
SystemCPU The amount of system CPU time used by the job or job step. The format of
the output is identical to that of the Elapsed field.
NOTE: SystemCPU provides a measure of the task's parent process and does
not include CPU time of child processes.
Timelimit What the timelimit was/is for the job.
TotalCPU The sum of the SystemCPU and UserCPU time used by the job or job step.
The total CPU time of the job may exceed the job's elapsed time for jobs
that include multiple job steps. The format of the output is identical
to that of the Elapsed field.
NOTE: TotalCPU provides a measure of the task's parent process and does
not include CPU time of child processes.
UID The user identifier of the user who ran the job.
User The user name of the user who ran the job.
UserCPU The amount of user CPU time used by the job or job step. The format of
the output is identical to that of the Elapsed field.
NOTE: UserCPU provides a measure of the task's parent process and does
not include CPU time of child processes.
WCKey Workload Characterization Key. Arbitrary string for grouping
orthogonal accounts together.
WCKeyID Reference to the wckey.
ENVIRONMENT VARIABLES
Some sacct options may be set via environment variables. These environment variables,
along with their corresponding options, are listed below. (Note: Commandline options will
always override these settings.)
SACCT_FEDERATION Same as --federation
SACCT_LOCAL Same as --local
SLURM_CONF The location of the Slurm configuration file.
SLURM_TIME_FORMAT Specify the format used to report time stamps. A value of standard,
the default value, generates output in the form
"year-month-dateThour:minute:second". A value of relative returns
only "hour:minute:second" if the current day. For other dates in the
current year it prints the "hour:minute" preceded by "Tomorr"
(tomorrow), "Ystday" (yesterday), the name of the day for the coming
week (e.g. "Mon", "Tue", etc.), otherwise the date (e.g. "25 Apr").
For other years it returns a date month and year without a time (e.g.
"6 Jun 2012"). All of the time stamps use a 24 hour format.
A valid strftime() format can also be specified. For example, a value
of "%a %T" will report the day of the week and a time stamp (e.g. "Mon
12:34:56").
EXAMPLES
This example illustrates the default invocation of the sacct command:
# sacct
Jobid Jobname Partition Account AllocCPUS State ExitCode
---------- ---------- ---------- ---------- ---------- ---------- --------
2 script01 srun acct1 1 RUNNING 0
3 script02 srun acct1 1 RUNNING 0
4 endscript srun acct1 1 RUNNING 0
4.0 srun acct1 1 COMPLETED 0
This example shows the same job accounting information with the brief option.
# sacct --brief
Jobid State ExitCode
---------- ---------- --------
2 RUNNING 0
3 RUNNING 0
4 RUNNING 0
4.0 COMPLETED 0
# sacct --allocations
Jobid Jobname Partition Account AllocCPUS State ExitCode
---------- ---------- ---------- ---------- ------- ---------- --------
3 sja_init andy acct1 1 COMPLETED 0
4 sjaload andy acct1 2 COMPLETED 0
5 sja_scr1 andy acct1 1 COMPLETED 0
6 sja_scr2 andy acct1 18 COMPLETED 2
7 sja_scr3 andy acct1 18 COMPLETED 0
8 sja_scr5 andy acct1 2 COMPLETED 0
9 sja_scr7 andy acct1 90 COMPLETED 1
10 endscript andy acct1 186 COMPLETED 0
This example demonstrates the ability to customize the output of the sacct command. The
fields are displayed in the order designated on the command line.
# sacct --format=jobid,elapsed,ncpus,ntasks,state
Jobid Elapsed Ncpus Ntasks State
---------- ---------- ---------- -------- ----------
3 00:01:30 2 1 COMPLETED
3.0 00:01:30 2 1 COMPLETED
4 00:00:00 2 2 COMPLETED
4.0 00:00:01 2 2 COMPLETED
5 00:01:23 2 1 COMPLETED
5.0 00:01:31 2 1 COMPLETED
This example demonstrates the use of the -T (--truncate) option when used with -S
(--starttime) and -E (--endtime). When the -T option is used, the start time of the job
will be the specified -S value if the job was started before the specified time, otherwise
the time will be the job's start time. The end time will be the specified -E option if the
job ends after the specified time, otherwise it will be the jobs end time.
NOTE: If no -s (--state) option is given sacct will display jobs that ran during the
specified time, otherwise it returns jobs that were in the state requested during that
period of time.
Without -T (normal operation) sacct output would be like this.
# sacct -S2014-07-03-11:40 -E2014-07-03-12:00 -X -ojobid,start,end,state
JobID Start End State
--------- --------------------- -------------------- ------------
2 2014-07-03T11:33:16 2014-07-03T11:59:01 COMPLETED
3 2014-07-03T11:35:21 Unknown RUNNING
4 2014-07-03T11:35:21 2014-07-03T11:45:21 COMPLETED
5 2014-07-03T11:41:01 Unknown RUNNING
By adding the -T option the job's start and end times are truncated to reflect only the
time requested. If a job started after the start time requested or finished before the
end time requested those times are not altered. The -T option is useful when determining
exact run times during any given period.
# sacct -T -S2014-07-03-11:40 -E2014-07-03-12:00 -X -ojobid,jobname,user,start,end,state
JobID Start End State
--------- --------------------- -------------------- ------------
2 2014-07-03T11:40:00 2014-07-03T11:59:01 COMPLETED
3 2014-07-03T11:40:00 2014-07-03T12:00:00 RUNNING
4 2014-07-03T11:40:00 2014-07-03T11:45:21 COMPLETED
5 2014-07-03T11:41:01 2014-07-03T12:00:00 RUNNING
COPYING
Copyright (C) 2005-2007 Copyright Hewlett-Packard Development Company L.P.
Copyright (C) 2008-2010 Lawrence Livermore National Security. Produced at Lawrence
Livermore National Laboratory (cf, DISCLAIMER).
Copyright (C) 2010-2014 SchedMD LLC.
This file is part of Slurm, a resource management program. For details, see
<https://slurm.schedmd.com/>.
Slurm is free software; you can redistribute it and/or modify it under the terms of the
GNU General Public License as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
Slurm is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without
even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
FILES
/etc/slurm.conf
Entries to this file enable job accounting and designate the job accounting log
file that collects system job accounting.
/var/log/slurm_accounting.log
The default job accounting log file. By default, this file is set to read and
write permission for root only.
SEE ALSO
sstat(1), ps (1), srun(1), squeue(1), getrusage (2), time (2)