NAME

       scantool - ODB-II vehicle diagnostic scanner

SYNOPSIS

       scantool

DESCRIPTION

       This manual page documents briefly the scantool program.

       scantool  is  a  program  that communicates with an ODB-II serial device that converts CAN-bus to RS-232.
       Since the application was originally written for DOS, the internal configuration refers  to  COM1,  COM2,
       etc.  As a work-around under Linux, selecting COM1 will attempt to open /dev/ttyUSB0 then /dev/ttyS0, and
       COM2  will  attempt  /dev/ttyUSB1  then  /dev/ttyS1, etc. When connecting to a vehicle ODB-II system, the
       correct baud rate will need to be manually selected via trial-and-error.

OPTIONS

       There are no command line options; all settings are configured within the GUI.

AUTHOR

       scantool was written by ScanTool.net, LLC.

       This manual page was written by Kees Cook <kees@debian.org>, for the Debian project (and may be  used  by
       others).

                                                  May 22, 2011                                       SCANTOOL(1)