Provided by: gmt-common_5.4.3+dfsg-1_all 
NAME
sphdistance - Make Voronoi distance, node, or nearest-neighbor grid on a sphere
SYNOPSIS
sphdistance [ table ] -Ggrdfile [ -C ] [ -Ed|n|z[dist] ] [ -Iincrement ] [ -Lunit ] [ -Nnodetable ]
[ -Qvoronoi.txt ] [ -Rregion ] [ -V[level] ] [ -bbinary ] [ -dnodata ] [ -eregexp ] [ -hheaders ] [
-iflags ] [ -r ] [ -:[i|o] ]
Note: No space is allowed between the option flag and the associated arguments.
DESCRIPTION
sphdistance reads one or more ASCII [or binary] files (or standard input) containing lon, lat and
performs the construction of Voronoi polygons. These polygons are then processed to calculate the nearest
distance to each node of the lattice and written to the specified grid. The Voronoi algorithm used is
STRIPACK. As an option, you may provide pre-calculated Voronoi polygon file in the format written by
sphtriangulate, thus bypassing the memory- and time-consuming triangularization.
REQUIRED ARGUMENTS
-Ggrdfile
Name of the output grid to hold the computed distances (but see -E for other node value options).
OPTIONAL ARGUMENTS
table One or more ASCII (or binary, see -bi[ncols][type]) data table file(s) holding a number of data
columns. If no tables are given then we read from standard input.
-C For large data sets you can save some memory (at the expense of more processing) by only storing
one form of location coordinates (geographic or Cartesian 3-D vectors) at any given time,
translating from one form to the other when necessary [Default keeps both arrays in memory]. Not
applicable with -Q.
-Ed|n|z[dist]
Specify the quantity that should be assigned to the grid nodes. By default we compute distances
to the nearest data point [-Ed]. Use -En to assign the ID numbers of the Voronoi polygons that
each grid node is inside, or use -Ez for a natural nearest-neighbor grid where we assign all nodes
inside the polygon the z-value of the center node. Optionally, append the resampling interval
along Voronoi arcs in spherical degrees [1].
-Ixinc[unit][+e|n][/yinc[unit][+e|n]]
x_inc [and optionally y_inc] is the grid spacing. Optionally, append a suffix modifier.
Geographical (degrees) coordinates: Append m to indicate arc minutes or s to indicate arc seconds.
If one of the units e, f, k, M, n or u is appended instead, the increment is assumed to be given
in meter, foot, km, Mile, nautical mile or US survey foot, respectively, and will be converted to
the equivalent degrees longitude at the middle latitude of the region (the conversion depends on
PROJ_ELLIPSOID). If y_inc is given but set to 0 it will be reset equal to x_inc; otherwise it will
be converted to degrees latitude. All coordinates: If +e is appended then the corresponding max x
(east) or y (north) may be slightly adjusted to fit exactly the given increment [by default the
increment may be adjusted slightly to fit the given domain]. Finally, instead of giving an
increment you may specify the number of nodes desired by appending +n to the supplied integer
argument; the increment is then recalculated from the number of nodes and the domain. The
resulting increment value depends on whether you have selected a gridline-registered or
pixel-registered grid; see App-file-formats for details. Note: if -Rgrdfile is used then the grid
spacing has already been initialized; use -I to override the values.
-Lunit Specify the unit used for distance calculations. Choose among d (spherical degree), e (m), f
(feet), k (km), M (mile), n (nautical mile) or u survey foot. A spherical approximation is used
unless PROJ_ELLIPSOID is set to an actual ellipsoid.
-Nnodetable
Read the information pertaining to each Voronoi polygon (the unique node lon, lat and polygon
area) from a separate file [Default acquires this information from the ASCII segment headers of
the output file]. Required if binary input via -Q is used.
-Qvoronoi.txt
Append the name of a file with pre-calculated Voronoi polygons [Default performs the Voronoi
construction on input data]. For binary data -bi you must specify the node information separately
(via -N).
-Rwest/east/south/north[/zmin/zmax][+r][+uunit]
west, east, south, and north specify the region of interest, and you may specify them in decimal
degrees or in [±]dd:mm[:ss.xxx][W|E|S|N] format Append +r if lower left and upper right map
coordinates are given instead of w/e/s/n. The two shorthands -Rg and -Rd stand for global domain
(0/360 and -180/+180 in longitude respectively, with -90/+90 in latitude). Alternatively for grid
creation, give Rcodelon/lat/nx/ny, where code is a 2-character combination of L, C, R (for left,
center, or right) and T, M, B for top, middle, or bottom. e.g., BL for lower left. This indicates
which point on a rectangular region the lon/lat coordinate refers to, and the grid dimensions nx
and ny with grid spacings via -I is used to create the corresponding region. Alternatively,
specify the name of an existing grid file and the -R settings (and grid spacing, if applicable)
are copied from the grid. Appending +uunit expects projected (Cartesian) coordinates compatible
with chosen -J and we inversely project to determine actual rectangular geographic region. For
perspective view (-p), optionally append /zmin/zmax. In case of perspective view (-p), a z-range
(zmin, zmax) can be appended to indicate the third dimension. This needs to be done only when
using the -Jz option, not when using only the -p option. In the latter case a perspective view of
the plane is plotted, with no third dimension.
-V[level] (more …)
Select verbosity level [c].
-bi[ncols][t] (more …)
Select native binary input. [Default is 2 input columns].
-bo[ncols][type] (more …)
Select native binary output. [Default is same as input].
-d[i|o]nodata (more …)
Replace input columns that equal nodata with NaN and do the reverse on output.
-e[~]”pattern” | -e[~]/regexp/[i] (more …)
Only accept data records that match the given pattern.
-h[i|o][n][+c][+d][+rremark][+rtitle] (more …)
Skip or produce header record(s).
-icols[+l][+sscale][+ooffset][,…] (more …)
Select input columns and transformations (0 is first column).
-r (more …)
Set pixel node registration [gridline].
-:[i|o] (more …)
Swap 1st and 2nd column on input and/or output.
-^ or just -
Print a short message about the syntax of the command, then exits (NOTE: on Windows just use -).
-+ or just +
Print an extensive usage (help) message, including the explanation of any module-specific option
(but not the GMT common options), then exits.
-? or no arguments
Print a complete usage (help) message, including the explanation of all options, then exits.
ASCII FORMAT PRECISION
The ASCII output formats of numerical data are controlled by parameters in your gmt.conf file. Longitude
and latitude are formatted according to FORMAT_GEO_OUT, absolute time is under the control of
FORMAT_DATE_OUT and FORMAT_CLOCK_OUT, whereas general floating point values are formatted according to
FORMAT_FLOAT_OUT. Be aware that the format in effect can lead to loss of precision in ASCII output, which
can lead to various problems downstream. If you find the output is not written with enough precision,
consider switching to binary output (-bo if available) or specify more decimals using the
FORMAT_FLOAT_OUT setting.
GRID VALUES PRECISION
Regardless of the precision of the input data, GMT programs that create grid files will internally hold
the grids in 4-byte floating point arrays. This is done to conserve memory and furthermore most if not
all real data can be stored using 4-byte floating point values. Data with higher precision (i.e., double
precision values) will lose that precision once GMT operates on the grid or writes out new grids. To
limit loss of precision when processing data you should always consider normalizing the data prior to
processing.
EXAMPLES
To construct Voronoi polygons from the points in the file testdata.txt and then calculate distances from
the data to a global 1x1 degree grid, use
gmt sphdistance testdata.txt -Rg -I1 -Gglobedist.nc
To generate the same grid in two steps using sphtriangulate separately, try
gmt sphtriangulate testdata.txt -Qv > voronoi.txt
gmt sphdistance -Qvoronoi.txt -Rg -I1 -Gglobedist.nc
SEE ALSO
gmt, sphtriangulate, triangulate
REFERENCES
Renka, R, J., 1997, Algorithm 772: STRIPACK: Delaunay Triangulation and Voronoi Diagram on the Surface of
a Sphere, AMC Trans. Math. Software, 23(3), 416-434.
COPYRIGHT
2018, P. Wessel, W. H. F. Smith, R. Scharroo, J. Luis, and F. Wobbe
5.4.3 Jan 03, 2018 SPHDISTANCE(1gmt)