Provided by: sshuttle_0.78.3-1ubuntu1.1_all 
NAME
sshuttle - sshuttle documentation
SYNOPSIS
sshuttle [options] [-r [username@]sshserver[:port]] <subnets …>
DESCRIPTION
sshuttle allows you to create a VPN connection from your machine to any remote server that you can
connect to via ssh, as long as that server has python 2.3 or higher.
To work, you must have root access on the local machine, but you can have a normal account on the server.
It’s valid to run sshuttle more than once simultaneously on a single client machine, connecting to a
different server every time, so you can be on more than one VPN at once.
If run on a router, sshuttle can forward traffic for your entire subnet to the VPN.
OPTIONS
subnets
A list of subnets to route over the VPN, in the form a.b.c.d[/width][port[-port]]. Valid examples
are 1.2.3.4 (a single IP address), 1.2.3.4/32 (equivalent to 1.2.3.4), 1.2.3.0/24 (a 24-bit
subnet, ie. with a 255.255.255.0 netmask), and 0/0 (‘just route everything through the VPN’). Any
of the previous examples are also valid if you append a port or a port range, so 1.2.3.4:8000 will
only tunnel traffic that has as the destination port 8000 of 1.2.3.4 and 1.2.3.0/24:8000-9000 will
tunnel traffic going to any port between 8000 and 9000 (inclusive) for all IPs in the 1.2.3.0/24
subnet. It is also possible to use a name in which case the first IP it resolves to during
startup will be routed over the VPN. Valid examples are example.com, example.com:8000 and
example.com:8000-9000.
--method [auto|nat|tproxy|pf]
Which firewall method should sshuttle use? For auto, sshuttle attempts to guess the appropriate
method depending on what it can find in PATH. The default value is auto.
-l, --listen=[ip:]port
Use this ip address and port number as the transparent proxy port. By default sshuttle finds an
available port automatically and listens on IP 127.0.0.1 (localhost), so you don’t need to
override it, and connections are only proxied from the local machine, not from outside machines.
If you want to accept connections from other machines on your network (ie. to run sshuttle on a
router) try enabling IP Forwarding in your kernel, then using --listen 0.0.0.0:0. You can use any
name resolving to an IP address of the machine running sshuttle, e.g. --listen localhost.
For the tproxy and pf methods this can be an IPv6 address. Use this option twice if required, to
provide both IPv4 and IPv6 addresses.
-H, --auto-hosts
Scan for remote hostnames and update the local /etc/hosts file with matching entries for as long
as the VPN is open. This is nicer than changing your system’s DNS (/etc/resolv.conf) settings,
for several reasons. First, hostnames are added without domain names attached, so you can ssh
thatserver without worrying if your local domain matches the remote one. Second, if you sshuttle
into more than one VPN at a time, it’s impossible to use more than one DNS server at once anyway,
but sshuttle correctly merges /etc/hosts entries between all running copies. Third, if you’re
only routing a few subnets over the VPN, you probably would prefer to keep using your local DNS
server for everything else.
-N, --auto-nets
In addition to the subnets provided on the command line, ask the server which subnets it thinks we
should route, and route those automatically. The suggestions are taken automatically from the
server’s routing table.
--dns Capture local DNS requests and forward to the remote DNS server.
--python
Specify the name/path of the remote python interpreter. The default is just python, which means
to use the default python interpreter on the remote system’s PATH.
-r, --remote=[username@]sshserver[:port]
The remote hostname and optional username and ssh port number to use for connecting to the remote
server. For example, example.com, testuser@example.com, testuser@example.com:2222, or
example.com:2244.
-x, --exclude=subnet
Explicitly exclude this subnet from forwarding. The format of this option is the same as the
<subnets> option. To exclude more than one subnet, specify the -x option more than once. You can
say something like 0/0 -x 1.2.3.0/24 to forward everything except the local subnet over the VPN,
for example.
-X, --exclude-from=file
Exclude the subnets specified in a file, one subnet per line. Useful when you have lots of subnets
to exclude.
-v, --verbose
Print more information about the session. This option can be used more than once for increased
verbosity. By default, sshuttle prints only error messages.
-e, --ssh-cmd
The command to use to connect to the remote server. The default is just ssh. Use this if your ssh
client is in a non-standard location or you want to provide extra options to the ssh command, for
example, -e 'ssh -v'.
--seed-hosts
A comma-separated list of hostnames to use to initialize the --auto-hosts scan algorithm.
--auto-hosts does things like poll local SMB servers for lists of local hostnames, but can speed
things up if you use this option to give it a few names to start from.
If this option is used without --auto-hosts, then the listed hostnames will be scanned and added,
but no further hostnames will be added.
--no-latency-control
Sacrifice latency to improve bandwidth benchmarks. ssh uses really big socket buffers, which can
overload the connection if you start doing large file transfers, thus making all your other
sessions inside the same tunnel go slowly. Normally, sshuttle tries to avoid this problem using a
“fullness check” that allows only a certain amount of outstanding data to be buffered at a time.
But on high-bandwidth links, this can leave a lot of your bandwidth underutilized. It also makes
sshuttle seem slow in bandwidth benchmarks (benchmarks rarely test ping latency, which is what
sshuttle is trying to control). This option disables the latency control feature, maximizing
bandwidth usage. Use at your own risk.
-D, --daemon
Automatically fork into the background after connecting to the remote server. Implies --syslog.
--syslog
after connecting, send all log messages to the syslog(3) service instead of stderr. This is
implicit if you use --daemon.
--pidfile=pidfilename
when using --daemon, save sshuttle’s pid to pidfilename. The default is sshuttle.pid in the
current directory.
--disable-ipv6
If using tproxy or pf methods, this will disable IPv6 support.
--firewall
(internal use only) run the firewall manager. This is the only part of sshuttle that must run as
root. If you start sshuttle as a non-root user, it will automatically run sudo or su to start the
firewall manager, but the core of sshuttle still runs as a normal user.
--hostwatch
(internal use only) run the hostwatch daemon. This process runs on the server side and collects
hostnames for the --auto-hosts option. Using this option by itself makes it a lot easier to debug
and test the --auto-hosts feature.
EXAMPLES
Test locally by proxying all local connections, without using ssh:
$ sshuttle -v 0/0
Starting sshuttle proxy.
Listening on ('0.0.0.0', 12300).
[local sudo] Password:
firewall manager ready.
c : connecting to server...
s: available routes:
s: 192.168.42.0/24
c : connected.
firewall manager: starting transproxy.
c : Accept: 192.168.42.106:50035 -> 192.168.42.121:139.
c : Accept: 192.168.42.121:47523 -> 77.141.99.22:443.
...etc...
^C
firewall manager: undoing changes.
KeyboardInterrupt
c : Keyboard interrupt: exiting.
c : SW#8:192.168.42.121:47523: deleting
c : SW#6:192.168.42.106:50035: deleting
Test connection to a remote server, with automatic hostname and subnet guessing:
$ sshuttle -vNHr example.org
Starting sshuttle proxy.
Listening on ('0.0.0.0', 12300).
firewall manager ready.
c : connecting to server...
s: available routes:
s: 77.141.99.0/24
c : connected.
c : seed_hosts: []
firewall manager: starting transproxy.
hostwatch: Found: testbox1: 1.2.3.4
hostwatch: Found: mytest2: 5.6.7.8
hostwatch: Found: domaincontroller: 99.1.2.3
c : Accept: 192.168.42.121:60554 -> 77.141.99.22:22.
^C
firewall manager: undoing changes.
c : Keyboard interrupt: exiting.
c : SW#6:192.168.42.121:60554: deleting
DISCUSSION
When it starts, sshuttle creates an ssh session to the server specified by the -r option. If -r is
omitted, it will start both its client and server locally, which is sometimes useful for testing.
After connecting to the remote server, sshuttle uploads its (python) source code to the remote end and
executes it there. Thus, you don’t need to install sshuttle on the remote server, and there are never
sshuttle version conflicts between client and server.
Unlike most VPNs, sshuttle forwards sessions, not packets. That is, it uses kernel transparent proxying
(iptables REDIRECT rules on Linux) to capture outgoing TCP sessions, then creates entirely separate TCP
sessions out to the original destination at the other end of the tunnel.
Packet-level forwarding (eg. using the tun/tap devices on Linux) seems elegant at first, but it results
in several problems, notably the ‘tcp over tcp’ problem. The tcp protocol depends fundamentally on
packets being dropped in order to implement its congestion control agorithm; if you pass tcp packets
through a tcp-based tunnel (such as ssh), the inner tcp packets will never be dropped, and so the inner
tcp stream’s congestion control will be completely broken, and performance will be terrible. Thus,
packet-based VPNs (such as IPsec and openvpn) cannot use tcp-based encrypted streams like ssh or ssl, and
have to implement their own encryption from scratch, which is very complex and error prone.
sshuttle’s simplicity comes from the fact that it can safely use the existing ssh encrypted tunnel
without incurring a performance penalty. It does this by letting the client-side kernel manage the
incoming tcp stream, and the server-side kernel manage the outgoing tcp stream; there is no need for
congestion control to be shared between the two separate streams, so a tcp-based tunnel is fine.
SEE ALSO:
ssh(1), python(1)
AUTHOR
Brian May
COPYRIGHT
2020, Brian May
0.78 Sep 19, 2020 SSHUTTLE(1)