Provided by: sumo_0.32.0+dfsg1-1_amd64 
NAME
SUMO - GUI version of the simulation SUMO
SYNOPSIS
sumo-gui [OPTION]*
DESCRIPTION
SUMO gui Version 0.32.0
Copyright (C) 2001-2017 German Aerospace Center (DLR) and others;
http://sumo.dlr.de
GUI version of the simulation SUMO.
Configuration Options:
-c, --configuration-file FILE
Loads the named config on startup
--save-configuration FILE
Saves current configuration into FILE
--save-template FILE
Saves a configuration template (empty) into FILE
--save-schema FILE
Saves the configuration schema into FILE
--save-commented
Adds comments to saved template, configuration, or schema
Input Options:
-n, --net-file FILE
Load road network description from FILE
-r, --route-files FILE
Load routes descriptions from FILE(s)
-a, --additional-files FILE
Load further descriptions from FILE(s)
-w, --weight-files FILE
Load edge/lane weights for online rerouting from FILE
-x, --weight-attribute STR
Name of the xml attribute which gives the edge weight
--load-state FILE
Loads a network state from FILE
--load-state.offset TIME
Shifts all times loaded from a saved state by the given offset
--load-state.remove-vehicles STR
Removes vehicles with the given IDs from the loaded state
Output Options:
--output-prefix STR
Prefix which is applied to all output files. The special string 'TIME' is replaced
by the current time.
--precision INT
Defines the number of digits after the comma for floating point output
--precision.geo INT
Defines the number of digits after the comma for lon,lat output
--netstate-dump FILE
Save complete network states into FILE
--netstate-dump.empty-edges
Write also empty edges completely when dumping
--netstate-dump.precision INT
Write positions and speeds with the given precision (default 2)
--emission-output FILE
Save the emission values of each vehicle
--emission-output.precision INT
Write emission values with the given precision (default 2)
--battery-output FILE
Save the battery values of each vehicle
--battery-output.precision INT
Write battery values with the given precision (default 2)
--chargingstations-output FILE
Write data of charging stations
--fcd-output FILE
Save the Floating Car Data
--fcd-output.geo
Save the Floating Car Data using geo-coordinates (lon/lat)
--fcd-output.signals
Add the vehicle signal state to the FCD output (brake lights etc.)
--full-output FILE
Save a lot of information for each timestep (very redundant)
--queue-output FILE
Save the vehicle queues at the junctions (experimental)
--vtk-output FILE
Save complete vehicle positions inclusive speed values in the VTK Format (usage:
/path/out will produce /path/out_$TIMESTEP$.vtp files)
--amitran-output FILE
Save the vehicle trajectories in the Amitran format
--summary-output FILE
Save aggregated vehicle departure info into FILE
--tripinfo-output FILE
Save single vehicle trip info into FILE
--tripinfo-output.write-unfinished
Write tripinfo output for vehicles which have not arrived at simulation end
--vehroute-output FILE
Save single vehicle route info into FILE
--vehroute-output.exit-times
Write the exit times for all edges
--vehroute-output.last-route
Write the last route only
--vehroute-output.sorted
Sorts the output by departure time
--vehroute-output.dua
Write the output in the duarouter alternatives style
--vehroute-output.intended-depart
Write the output with the intended instead of the real departure time
--vehroute-output.route-length
Include total route length in the output
--vehroute-output.write-unfinished
Write vehroute output for vehicles which have not arrived at simulation end
--vehroute-output.skip-ptlines
Skip vehroute output for public transport vehicles
--link-output FILE
Save links states into FILE
--bt-output FILE
Save bluetooth visibilities into FILE (in conjunction with device.btreceiver and
device.btsender)
--lanechange-output FILE
Record lane changes and their motivations for all vehicles into FILE
--lanechange-output.started
Record start of lane change manoeuvres
--lanechange-output.ended
Record end of lane change manoeuvres
--stop-output FILE
Record stops and loading/unloading of passenger and containers for all vehicles
into FILE
--save-state.times INT[]
Use INT[] as times at which a network state written
--save-state.period TIME
save state repeatedly after TIME period
--save-state.prefix FILE
Prefix for network states
--save-state.suffix STR
Suffix for network states (.sbx or .xml)
--save-state.files FILE
Files for network states
Time Options:
-b, --begin TIME
Defines the begin time in seconds; The simulation starts at this time
-e, --end TIME
Defines the end time in seconds; The simulation ends at this time
--step-length TIME
Defines the step duration in seconds
Processing Options:
--step-method.ballistic
Whether to use ballistic method for the positional update of vehicles (default is a
semi-implicit Euler method).
--lateral-resolution FLOAT
Defines the resolution in m when handling lateral positioning within a lane (with
-1 all vehicles drive at the center of their lane
--carfollow.model STR
Select default car following model (Krauss, IDM, ...)
-s, --route-steps TIME
Load routes for the next number of seconds ahead
--no-internal-links
Disable (junction) internal links
--ignore-junction-blocker TIME
Ignore vehicles which block the junction after they have been standing for SECONDS
(-1 means never ignore)
--ignore-route-errors
Do not check whether routes are connected
--ignore-accidents
Do not check whether accidents occur
--collision.action STR
How to deal with collisions: [none,warn,teleport,remove]
--collision.stoptime TIME
Let vehicle stop for TIME before performing collision.action (except for action
'none')
--collision.check-junctions
Enables collisions checks on junctions
--collision.mingap-factor FLOAT
Sets the fraction of minGap that must be maintained to avoid collision detection.
--max-num-vehicles INT
Delay vehicle insertion to stay within the given maximum number
--max-num-teleports INT
Abort the simulation if the given maximum number of teleports is exceeded
--scale FLOAT
Scale demand by the given factor (by discarding or duplicating vehicles)
--time-to-teleport TIME
Specify how long a vehicle may wait until being teleported, defaults to 300,
non-positive values disable teleporting
--time-to-teleport.highways TIME
The waiting time after which vehicles on a fast road (speed > 69m/s) are teleported
if they are on a non-continuing lane
--waiting-time-memory TIME
Length of time interval, over which accumulated waiting time is taken into account
(default is 100s.)
--max-depart-delay TIME
How long vehicles wait for departure before being skipped, defaults to -1 which
means vehicles are never skipped
--sloppy-insert
Whether insertion on an edge shall not be repeated in same step once failed
--eager-insert
Whether each vehicle is checked separately for insertion on an edge
--random-depart-offset TIME
Each vehicle receives a random offset to its depart value drawn uniformly from [0,
TIME]
--lanechange.duration TIME
Duration of a lane change maneuver (default 0)
--lanechange.overtake-right
Whether overtaking on the right on motorways is permitted
--tls.all-off
Switches off all traffic lights.
--time-to-impatience TIME
Specify how long a vehicle may wait until impatience grows from 0 to 1, defaults to
300, non-positive values disable impatience growth
--default.action-step-length FLOAT
Length of the default interval length between action points for the car-following
and lane-change models (in seconds). If not specified, the simulation step-length
is used per default. Vehicle- or VType-specific settings override the default. Must
be a multiple of the simulation step-length.
--pedestrian.model STR
Select among pedestrian models ['nonInteracting', 'striping', 'remote']
--pedestrian.striping.stripe-width FLOAT
Width of parallel stripes for segmenting a sidewalk (meters) for use with model
'striping'
--pedestrian.striping.dawdling FLOAT
factor for random slow-downs [0,1] for use with model 'striping'
--pedestrian.striping.jamtime TIME
Time in seconds after which pedestrians start squeezing through a jam when using
model 'striping' (non-positive values disable squeezing)
--pedestrian.remote.address STR
The address (host:port) of the external simulation
Routing Options:
--routing-algorithm STR
Select among routing algorithms ['dijkstra', 'astar', 'CH', 'CHWrapper']
--weights.random-factor FLOAT
Edge weights for routing are dynamically disturbed by a random factor drawn
uniformly from [1,FLOAT)
--astar.all-distances FILE
Initialize lookup table for astar from the given file (generated by marouter
--all-pairs-output)
--astar.landmark-distances FILE
Initialize lookup table for astar ALT-variant from the given file
--persontrip.walkfactor FLOAT
Use FLOAT as a factor on pedestrian maximum speed during intermodal routing
--persontrip.transfer.car-walk STR
Where are mode changes from car to walking allowed (possible values:
'parkingAreas', 'ptStops', 'allJunctions' and combinations)
--device.rerouting.probability FLOAT
The probability for a vehicle to have a 'rerouting' device
--device.rerouting.explicit STR
Assign a 'rerouting' device to named vehicles
--device.rerouting.deterministic
The 'rerouting' devices are set deterministic using a fraction of 1000
--device.rerouting.period TIME
The period with which the vehicle shall be rerouted
--device.rerouting.pre-period TIME
The rerouting period before depart
--device.rerouting.adaptation-weight FLOAT
The weight of prior edge weights for exponential moving average
--device.rerouting.adaptation-steps INT
The number of steps for moving average weight of prior edge weights
--device.rerouting.adaptation-interval TIME
The interval for updating the edge weights
--device.rerouting.with-taz
Use zones (districts) as routing startand endpoints
--device.rerouting.init-with-loaded-weights
Use weight files given with option --weight-files for initializing edge weights
--device.rerouting.threads INT
The number of parallel execution threads used for rerouting
--device.rerouting.output FILE
Save adapting weights to FILE
Report Options:
-v, --verbose
Switches to verbose output
--print-options
Prints option values before processing
-?, --help
Prints this screen
-V, --version
Prints the current version
-X, --xml-validation STR
Set schema validation scheme of XML inputs ("never", "auto" or "always")
--xml-validation.net STR
Set schema validation scheme of SUMO network inputs ("never", "auto" or "always")
-W, --no-warnings
Disables output of warnings
-l, --log FILE
Writes all messages to FILE (implies verbose)
--message-log FILE
Writes all non-error messages to FILE (implies verbose)
--error-log FILE
Writes all warnings and errors to FILE
--duration-log.disable
Disable performance reports for individual simulation steps
--duration-log.statistics
Enable statistics on vehicle trips
--no-step-log
Disable console output of current simulation step
Emissions Options:
--phemlight-path FILE
Determines where to load PHEMlight definitions from.
--device.emissions.probability FLOAT
The probability for a vehicle to have a 'emissions' device
--device.emissions.explicit STR
Assign a 'emissions' device to named vehicles
--device.emissions.deterministic
The 'emissions' devices are set deterministic using a fraction of 1000
Communication Options:
--device.btreceiver.probability FLOAT
The probability for a vehicle to have a 'btreceiver' device
--device.btreceiver.explicit STR
Assign a 'btreceiver' device to named vehicles
--device.btreceiver.deterministic
The 'btreceiver' devices are set deterministic using a fraction of 1000
--device.btreceiver.range FLOAT
The range of the bt receiver
--device.btreceiver.all-recognitions
Whether all recognition point shall be written
--device.btreceiver.offtime FLOAT
The offtime used for calculating detection probability (in seconds)
--device.btsender.probability FLOAT
The probability for a vehicle to have a 'btsender' device
--device.btsender.explicit STR
Assign a 'btsender' device to named vehicles
--device.btsender.deterministic
The 'btsender' devices are set deterministic using a fraction of 1000
Battery Options:
--device.battery.probability FLOAT
The probability for a vehicle to have a 'battery' device
--device.battery.explicit STR
Assign a 'battery' device to named vehicles
--device.battery.deterministic
The 'battery' devices are set deterministic using a fraction of 1000
Example Device Options:
--device.example.probability FLOAT
The probability for a vehicle to have a 'example' device
--device.example.explicit STR
Assign a 'example' device to named vehicles
--device.example.deterministic
The 'example' devices are set deterministic using a fraction of 1000
--device.example.parameter FLOAT
An exemplary parameter which can be used by all instances of the example device
SSM Device Options:
--device.ssm.probability FLOAT
The probability for a vehicle to have a 'ssm' device
--device.ssm.explicit STR
Assign a 'ssm' device to named vehicles
--device.ssm.deterministic
The 'ssm' devices are set deterministic using a fraction of 1000
--device.ssm.measures STR
Specifies which measures will be logged (as a space seperated sequence of IDs in
('TTC', 'DRAC', 'PET')).
--device.ssm.thresholds STR
Specifies thresholds corresponding to the specified measures (see documentation and
watch the order!). Only events exceeding the thresholds will be logged.
--device.ssm.trajectories
Specifies whether trajectories will be logged (if false, only the extremal values
and times are reported, this is the default).
--device.ssm.range FLOAT
Specifies the detection range in meters (default is 50.00m.). For vehicles below
this distance from the equipped vehicle, SSM values are traced.
--device.ssm.extratime FLOAT
Specifies the time in seconds to be logged after a conflict is over (default is
5.00secs.). Required >0 if PET is to be calculated for crossing conflicts.
--device.ssm.geo
Whether to use coordinates of the original reference system in output (default is
false).
Bluelight Device Options:
--device.bluelight.probability FLOAT
The probability for a vehicle to have a 'bluelight' device
--device.bluelight.explicit STR
Assign a 'bluelight' device to named vehicles
--device.bluelight.deterministic
The 'bluelight' devices are set deterministic using a fraction of 1000
--device.bluelight.parameter FLOAT
An exemplary parameter which can be used by all instances of the example device
TraCI Server Options:
--remote-port INT
Enables TraCI Server if set
--num-clients INT
Expected number of connecting clients
Mesoscopic Options:
--mesosim
Enables mesoscopic simulation
--meso-edgelength FLOAT
Length of an edge segment in mesoscopic simulation
--meso-tauff TIME
Factor for calculating the net free-free headway time
--meso-taufj TIME
Factor for calculating the net free-jam headway time
--meso-taujf TIME
Factor for calculating the jam-free headway time
--meso-taujj TIME
Factor for calculating the jam-jam headway time
--meso-jam-threshold FLOAT
Minimum percentage of occupied space to consider a segment jammed. A negative
argument causes thresholds to be computed based on edge speed and tauff (default)
--meso-multi-queue
Enable multiple queues at edge ends
--meso-junction-control
Enable mesoscopic traffic light and priority junction handling
--meso-junction-control.limited
Enable mesoscopic traffic light and priority junction handling for saturated links.
This prevents faulty traffic lights from hindering flow in low-traffic situations
--meso-tls-penalty FLOAT
Apply scaled time penalties when driving across tls controlled junctions based on
green split instead of checking actual phases
--meso-minor-penalty TIME
Apply fixed time penalty when driving across a minor link. When using
--meso-junction-control.limited, the penalty is not applied whenever limited
control is active.
--meso-overtaking
Enable mesoscopic overtaking
--meso-recheck TIME
Time interval for rechecking insertion into the next segment after failure
Random Number Options:
--random
Initialises the random number generator with the current system time
--seed INT
Initialises the random number generator with the given value
GUI Only Options:
--gui-settings-file FILE
Load visualisation settings from FILE
-Q, --quit-on-end
Quits the GUI when the simulation stops
-G, --game
Start the GUI in gaming mode
-S, --start
Start the simulation after loading
-D, --demo
Restart the simulation after ending (demo mode)
-T, --disable-textures
Do not load background pictures
--window-size STR
Create initial window with the given x,y size
--window-pos STR
Create initial window at the given x,y position
--tracker-interval FLOAT
The aggregation period for value tracker windows
--gui-testing
Enable ovelay for screen recognition
--gui-testing-debug
Enable output messages during GUI-Testing
EXAMPLES
sumo-gui -b 0 -e 1000 -n net.xml -r routes.xml
start a simulation from time 0 to 1000 with given net and routes
sumo-gui -c munich_config.cfg
start with a configuration file
sumo-gui --help
print help
REPORTING BUGS
Report bugs at <http://sumo.dlr.de/trac/>.
Get in contact via <sumo@dlr.de>.
Build features: x86_64-pc-linux-gnu TRACI PROJ GDAL GUI
Copyright (C) 2001-2017 German Aerospace Center (DLR) and others;
http://sumo.dlr.de
SUMO gui Version 0.32.0 is part of SUMO.
SUMO is free software: you can redistribute it and/or modify it under the terms of the GNU
General Public License as published by the Free Software Foundation, either version 3 of
the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program.
If not, see http://www.gnu.org/licenses/gpl.html