Provided by: texlive-binaries_2017.20170613.44572-8build1_amd64

#### NAME

```       tex, initex - text formatting and typesetting

```

#### SYNOPSIS

```       tex [options] [&format] [file|\commands]

```

#### DESCRIPTION

```       Run  the  TeX  typesetter on file, usually creating file.dvi.  If the file argument has no
extension, ".tex" will be appended to it.  Instead of a filename, a set  of  TeX  commands
can be given, the first of which must start with a backslash.  With a &format argument TeX
uses a different set of precompiled commands,  contained  in  format.fmt;  it  is  usually
better to use the -fmt format option instead.

TeX  formats the interspersed text and commands contained in the named files and outputs a
typesetter independent file (called DVI, which is short for  DeVice  Independent).   TeX's
capabilities and language are described in The TeXbook.  TeX is normally used with a large
body of precompiled macros, and there are several specific  formatting  systems,  such  as
LaTeX, which require the support of several macro files.

This  version  of  TeX looks at its command line to see what name it was called under.  If
they exist, then both initex and virtex are symbolic links to the  tex  executable.   When
called  as  initex  (or when the -ini option is given) it can be used to precompile macros
into a .fmt file.  When called as virtex it will use the plain format.  When called  under
any  other  name,  TeX  will use that name as the name of the format to use.  For example,
when called as tex the tex format is used, which is identical to the  plain  format.   The
commands  defined  by  the plain format are documented in The TeXbook.  Other formats that
are often available include latex and amstex.

The non-option command line arguments to the TeX program are passed to  it  as  the  first
input  line.   (But it is often easier to type extended arguments as the first input line,
since UNIX shells  tend  to  gobble  up  or  misinterpret  TeX's  favorite  symbols,  like
backslashes,  unless you quote them.)  As described in The TeXbook, that first line should
begin with a filename, a \controlsequence, or a &formatname.

The normal usage is to say
tex paper
to start processing paper.tex.  The name paper will be the ``jobname'',  and  is  used  in
forming output filenames.  If TeX doesn't get a filename in the first line, the jobname is
texput.  When looking for a file, TeX looks for the name  with  and  without  the  default
extension  (.tex)  appended, unless the name already contains that extension.  If paper is
the ``jobname'', a log of error messages, with rather more detail than normally appears on
the screen, will appear in paper.log, and the output file will be in paper.dvi.

This  version  of TeX can look in the first line of the file paper.tex to see if it begins
with the  magic  sequence  %&.   If  the  first  line  begins  with  %&format  -translate-
file tcxname  then  TeX will use the named format and translation table tcxname to process
the source file.  Either the format name  or  the  -translate-file  specification  may  be
omitted, but not both.  This overrides the format selection based on the name by which the
program is invoked.  The -parse-first-line option or  the  parse_first_line  configuration
variable controls whether this behaviour is enabled.

The  e  response to TeX's error prompt causes the system default editor to start up at the
current line of the current file.  The environment variable TEXEDIT can be used to  change
the editor used.  It may contain a string with "%s" indicating where the filename goes and
"%d" indicating where the decimal line number (if  any)  goes.   For  example,  a  TEXEDIT
string for emacs can be set with the sh command
TEXEDIT="emacs +%d %s"; export TEXEDIT

A  convenient  file in the library is null.tex, containing nothing.  When TeX can't find a
file it thinks you want to input, it keeps asking you  for  another  filename;  responding
`null'  gets  you  out of the loop if you don't want to input anything.  You can also type

```

#### OPTIONS

```       This version of TeX understands the following command line options.

-enc   Enable the encTeX extensions.  This option is only effective  in  combination  with
-ini.       For      documentation     of     the     encTeX     extensions     see
http://www.olsak.net/enctex.html.

-file-line-error
Print error messages in the form file:line:error which is similar to the  way  many
compilers format them.

-no-file-line-error
Disable printing error messages in the file:line:error style.

-file-line-error-style
This is the old name of the -file-line-error option.

-fmt format
Use  format  as the name of the format to be used, instead of the name by which TeX
was called or a %& line.

-halt-on-error
Exit with an error code when an error is encountered during processing.

-help  Print help message and exit.

-ini   Start in INI mode, which is used to dump formats.  The INI mode  can  be  used  for
typesetting,  but  no  format  is preloaded, and basic initializations like setting
catcodes may be required.

-interaction mode
Sets the  interaction  mode.   The  mode  can  be  either  batchmode,  nonstopmode,
scrollmode,  and  errorstopmode.  The meaning of these modes is the same as that of
the corresponding \commands.

-ipc   Send DVI output to a socket as well as the usual output file.  Whether this  option
is available is the choice of the installer.

-ipc-start
As  -ipc,  and  starts the server at the other end as well.  Whether this option is
available is the choice of the installer.

-jobname name
Use name for the job name, instead of deriving it from the name of the input file.

Sets path searching debugging flags according to the  bitmask.   See  the  Kpathsea
manual for details.

-mktex fmt
Enable mktexfmt, where fmt must be either tex or tfm.

-mltex Enable MLTeX extensions.  Only effective in combination with -ini.

-no-mktex fmt
Disable mktexfmt, where fmt must be either tex or tfm.

-output-comment string
Use string for the DVI file comment instead of the date.

-output-directory directory
Write  output  files  in directory instead of the current directory.  Look up input
files in directory first, then along the normal search path.  See also  description
of the TEXMFOUTPUT environment variable.

-parse-first-line
If the first line of the main input file begins with %& parse it to look for a dump
name or a -translate-file option.

-no-parse-first-line
Disable parsing of the first line of the main input file.

-progname name
Pretend to be program name.  This affects both  the  format  used  and  the  search
paths.

-recorder
Enable  the  filename  recorder.  This leaves a trace of the files opened for input
and output in a file with extension .fls.

-shell-escape
Enable the \write18{command} construct.  The command  can  be  any  shell  command.
This construct is normally disallowed for security reasons.

-no-shell-escape
Disable  the  \write18{command}  construct,  even if it is enabled in the texmf.cnf
file.

-src-specials
Insert source specials into the DVI file.

-src-specials where
Insert source specials in certain places of  the  DVI  file.   where  is  a  comma-
separated value list: cr, display, hbox, math, par, parent, or vbox.

-translate-file tcxname
Use  the  tcxname  translation table to set the mapping of input characters and re-
mapping of output characters.

-default-translate-file tcxname
Like -translate-file except that a %& line can overrule this setting.

-version
Print version information and exit.

```

#### ENVIRONMENT

```       See the Kpathsearch library documentation (the `Path  specifications'  node)  for  precise
details  of  how the environment variables are used.  The kpsewhich utility can be used to
query the values of the variables.

One caveat: In most TeX formats, you cannot use ~ in a filename you give directly to  TeX,
because  ~  is  an  active  character,  and  hence  is  expanded, not taken as part of the
filename.  Other programs, such as Metafont, do not have this problem.

TEXMFOUTPUT
Normally, TeX puts its output files in the current directory.  If any  output  file
cannot  be  opened  there,  it  tries  to open it in the directory specified in the
environment variable TEXMFOUTPUT.  There is no default  value  for  that  variable.
For  example,  if  you  say tex paper and the current directory is not writable, if
TEXMFOUTPUT has  the  value  /tmp,  TeX  attempts  to  create  /tmp/paper.log  (and
/tmp/paper.dvi,  if any output is produced.)  TEXMFOUTPUT is also checked for input
files, as TeX often generates files that need to be subsequently read;  for  input,
no  suffixes  (such  as  ``.tex'')  are  added by default, the input name is simply
checked as given.

TEXINPUTS
Search path for \input and \openin files.  This probably start with ``.'', so  that
user files are found before system files.  An empty path component will be replaced
with the paths defined in the  texmf.cnf  file.   For  example,  set  TEXINPUTS  to
".:/home/user/tex:"  to prepend the current directory and ``/home/user/tex'' to the
standard search path.

TEXFORMATS
Search path for format files.

TEXPOOL
search path for tex internal strings.

TEXEDIT
Command template for switching to editor.  The default, usually vi, is set when TeX
is compiled.

TFMFONTS
Search path for font metric (.tfm) files.

```

#### FILES

```       The location of the files mentioned below varies from system to system.  Use the kpsewhich
utility to find their locations.

texmf.cnf
Configuration file.  This contains definitions of search paths  as  well  as  other
configuration parameters like parse_first_line.

tex.pool
Text file containing TeX's internal strings.

texfonts.map
Filename mapping definitions.

*.tfm  Metric files for TeX's fonts.

*.fmt  Predigested TeX format (.fmt) files.

\$TEXMFMAIN/tex/plain/base/plain.tex
The basic macro package described in the TeXbook.

```

#### NOTES

```       This  manual  page  is  not  meant  to be exhaustive.  The complete documentation for this
version of TeX can be found in the info manual Web2C: A TeX implementation.

```

#### BUGS

```       This version of TeX implements a number of optional extensions.  In fact,  many  of  these
extensions  conflict  to a greater or lesser extent with the definition of TeX.  When such
extensions are enabled, the banner printed when  TeX  starts  is  changed  to  print  TeXk

This  version  of  TeX  fails  to  trap  arithmetic  overflow when dimensions are added or
subtracted.  Cases where this occurs are rare, but when it does  the  generated  DVI  file
will be invalid.

```

#### SEEALSO

```       mf(1),
Donald E. Knuth, The TeXbook, Addison-Wesley, 1986, ISBN 0-201-13447-0.
Leslie  Lamport,  LaTeX  -  A  Document  Preparation  System,  Addison-Wesley,  1985, ISBN
0-201-15790-X.
K. Berry, Eplain: Expanded plain TeX, ftp://ftp.cs.umb.edu/pub/tex/eplain/doc.
Michael Spivak, The Joy of TeX, 2nd edition, Addison-Wesley, 1990, ISBN 0-8218-2997-1.
TUGboat (the journal of the TeX Users Group).

```

#### TRIVIA

```       TeX, pronounced properly, rhymes with ``blecchhh.''  The proper  spelling  in  typewriter-
like fonts is ``TeX'' and not ``TEX'' or ``tex.''

```

#### AUTHORS

```       TeX  was  created  by  Donald E. Knuth, who implemented it using his Web system for Pascal
programs.  It was ported to Unix at Stanford by Howard Trickey, and at  Cornell  by  Pavel
Curtis.   The  version now offered with the Unix TeX distribution is that generated by the
Web to C system (web2c), originally written by Tomas Rokicki and Tim Morgan.

The encTeX extensions were written by Petr Olsak.
```