Provided by: yaws_2.0.4+dfsg-2ubuntu0.1_all bug

NAME

       yaws - yet another webserver

SYNOPSIS

       yaws [OPTIONS]

DESCRIPTION

       Yaws  is  fast lightweight webserver. It can run as daemon or in interactive mode where it
       is possible to directly  interact  with  the  webserver.  Yaws  is  particularly  good  at
       generating dynamic content. See the user docs for more information on that topic.

DAEMON/SERVER options

       -i | --interactive
              Interactive  mode.  This will start yaws in interactive mode with an erlang prompt.
              All error_logger messages will be written to the tty as well in this mode. Use this
              when developing yaws code.

       -w | --winteractive
              Cygwin inteactive mode (werl)

       -D | --daemon
              Daemon mode. This will start yaws as a daemon.

       --heart
              This  will  cause  the  yaws system to be automatically restarted in case it should
              crash. This switch also requires the --daemon switch to be present.

       --heart-restart=C,T
              This controls the number of restarts in a given time period  that  heart  tolerates
              before refusing to restart Yaws. By default, heart allows up to 5 restarts within a
              60 second period before refusing to restart Yaws again. This option allows up to  C
              restarts  in  T seconds instead. To allow infinite restarts, set both C and T to 0.
              This switch automatically enables the --heart switch.

       --debug
              Debug  mode.  This  will  produce  some  auxiliary  error  output  for  some  error
              conditions. It will also start the otp sasl lib for additional error printouts.

       --nodebug
              Non-debug  mode.  This  is  useful  for running interactively via the -i option but
              without incurring the performance penalties of debug mode.

       --conf file
              Use a different configuration file than the default. If the configuration parameter
              config  is  set,  yaws  use  it  as  default  configuration file. Else, The default
              configuration file when running as root is /etc/yaws/yaws.conf. When running  as  a
              non  priviliged  user, yaws will search for its configuration file in the following
              order.  First  in   $HOME/yaws.conf,   then   in   ./yaws.conf   and   finally   in
              /etc/yaws/yaws.conf.

       --runmod module
              Tells  yaws  to  call  module:start/0 at startup. This makes it possible to startup
              user specific applications together with yaws.

       --pa path
              Add path to the yaws system search path

       --tracetraf
              Traffic  trace  mode.  All  traffic  will  be  written  to  a  trace  file   called
              trace.traffic in the log directory.

       --tracehttp
              HTTP  trace  mode.  All  HTTP  messages  will  be  written  to  a trace file called
              trace.http in the log directory.

       --traceout
              When yaws is put into trace mode using either --tracetraf  or  --tracehttp,  traces
              are  written  to  files.  If we provide the --traceout flag, the trace will also be
              written to stdout.

       --trace
              Sames as --tracetraf --traceout. I.e. trace everything and write to stdout.

       --mnesiadir dir
              Start Mnesia in directory <dir>

       --sname xxx
              Start yaws as a distributed erlang node  with  name  <xxx>  using  the  unqualified
              hostname as nodename postfix

       --disable-kpoll
              By default, yaws starts erlang with +K true. This flag reverses that.

       --name xxx
              Start  yaws  as a distributed erlang node with name <xxx> using the fully qualified
              hostname as nodename postfix

       --proto_dist Mod
              Use module Mod for erlang distribution. This is typically only used when we want to
              run erlang distribution over SSL.

       --erlarg STRING
              Pass  STRING  as  an  additional argument to the "erl" program. If STRING comprises
              multiple words, you must quote it so that your shell passes it to yaws as a  single
              argument.  If  STRING  contains any single quote characters, you must quote each of
              them as well. For example, to pass the option -env NAME O'Keeffe to  "erl"  from  a
              Bourne-compatible shell:

                                     --erlarg "-env NAME O\'Keeffe"

       --id ID
              This  flag  sets  the  id. If we're starting a daemon (or an interactive system) it
              gives the Yaws server the identity ID. This means that the server  will  write  all
              internal files into the directory $HOME/.yaws/yaws/ID.

              Yaws  also  creates  a  file  called  $HOME/.yaws/yaws/ID/CTL  which  contains  the
              portnumber the daemon is listening on for control request by  the  control  command
              such as "yaws --hup" etc.

              If  we're  invoking a control command which should perform some control function on
              the daemon, we may have to give the --id flag also to the control  command.  If  we
              don't do this the control command may interact with the wrong daemon due to finding
              the wrong "ctl" file.

              The daemon may also optionally specify the  "id"  in  the  yaws.conf  configuration
              file.

       --umask MASK
              Set the umask for the daemon to MASK.

CONTROL OPTIONS

       The  following list of options are are used to control the daemon from the "outside" while
       it is running.

       --hup [--id ID]
              HUP the daemon. This forces the daemon to reread the configuration file.   It  also
              makes  the  daemon  empty all its internal content caches.  Hence when updating the
              doc root, HUPing the daemon is the fastest way to see the content updates.

       --stop [--id id]
              Stop the daemon (called id)

       --ls   Lists current ids and status of all yaws servers on  localhost.  In  practice  this
              amounts  to a listdir in $HOME/.yaws/yaws - and check whether the different systems
              who has created files there are alive.

       --status [--id id]
              Query a running yaws daemon for its status, and print it.

       --stats [--id id]
              Query a running yaws daemon for its statistics, and print it.

       --running-config [--id id]
              Query a running yaws daemon for its current configuration, and print it.  This  can
              be  useful  when  attempting  to  figure  out  how  to set config in embedded mode.
              Configure yaws to you liking in non-embedded mode, run this  command  and  use  the
              output to populate the embedded mode records.

       --load Modules [--id id]
              Try  to  (re)load  erlang  modules  into  a  running  daemon.  This is useful after
              modifying appmods or modules used by scripts.

       --debug-dump  [--id id]
              Produce a debug dump on stdout. In particular this code lists what we refer  to  as
              suspicious  processes.  I.e.  processes that might be hanging or processes that are
              "large" - hardcoded to 40k words.

       --ctltrace [--id ID] http | traffic | off
              Control the trace capabilities of a running yaws daemon. If  the  http  or  traffic
              option is given, the daemon will write a log for debug purposes into the logdir.

       --wait-started[=T] [--id ID]
              Waits  at  most  30  seconds  for  the  server  to start. Exits with 0 if server is
              running, 1 otherwise. Typically useful in test scripts. The default 30 seconds  can
              be modified by appending =T to the option, where T is the desired number of seconds
              to wait for the server to start.

MISC OPTIONS

       --check YawsFile [IncDirs ....]
              Test compile a `.yaws' file. Useful in Makefiles when we want to  ensure  that  all
              .yaws files are syntactically correct

       --version
              output version information and exit

ENVIRONMENT VARIABLES

       HOME   Is  used  to determine where we write the temporary files. By default all tmp files
              end up in $HOME/.yaws. This includes the JIT files that are the result of processed
              .yaws files and also the so called control file that is used by the daemon to write
              the port number to which it  is  listening  for  control  commands  such  as  "yaws
              --status"

              Thus  HOME is the handle we use in the control commands to find the control file so
              that we know where to connect to.

       YAWSHOME
              Can be used to override the HOME variable. This is useful when we for  example  are
              running yaws under port binding programs such as authpriv.

              It's  useful  by  distros  that don't want Yaws to write any files ever in the HOME
              directory of root.

AUTHOR

       Written by Claes Wikstrom

SEE ALSO

       yaws.conf(5) erl(1)

                                                                                          YAWS(1)