Provided by: freebsd-manpages_11.1-3_all 
NAME
recv, recvfrom, recvmsg, recvmmsg — receive message(s) from a socket
LIBRARY
Standard C Library (libc, -lc)
SYNOPSIS
#include <sys/types.h>
#include <sys/socket.h>
ssize_t
recv(int s, void *buf, size_t len, int flags);
ssize_t
recvfrom(int s, void *buf, size_t len, int flags, struct sockaddr * restrict from,
socklen_t * restrict fromlen);
ssize_t
recvmsg(int s, struct msghdr *msg, int flags);
ssize_t
recvmmsg(int s, struct mmsghdr * restrict msgvec, size_t vlen, int flags,
const struct timespec * restrict timeout);
DESCRIPTION
The recvfrom(), recvmsg(), and recvmmsg() system calls are used to receive messages from a
socket, and may be used to receive data on a socket whether or not it is connection-
oriented.
If from is not a null pointer and the socket is not connection-oriented, the source address
of the message is filled in. The fromlen argument is a value-result argument, initialized
to the size of the buffer associated with from, and modified on return to indicate the
actual size of the address stored there.
The recv() function is normally used only on a connected socket (see connect(2)) and is
identical to recvfrom() with a null pointer passed as its from argument.
The recvmmsg() function is used to receive multiple messages at a call. Their number is
supplied by vlen. The messages are placed in the buffers described by msgvec vector, after
reception. The size of each received message is placed in the msg_len field of each element
of the vector. If timeout is NULL the call blocks until the data is available for each
supplied message buffer. Otherwise it waits for data for the specified amount of time. If
the timeout expired and there is no data received, a value 0 is returned. The ppoll(2)
system call is used to implement the timeout mechanism, before first receive is performed.
The recv(), recvfrom() and recvmsg() return the length of the message on successful
completion, whereas recvmmsg() returns the number of received messages. If a message is too
long to fit in the supplied buffer, excess bytes may be discarded depending on the type of
socket the message is received from (see socket(2)).
If no messages are available at the socket, the receive call waits for a message to arrive,
unless the socket is non-blocking (see fcntl(2)) in which case the value -1 is returned and
the global variable errno is set to EAGAIN. The receive calls except recvmmsg() normally
return any data available, up to the requested amount, rather than waiting for receipt of
the full amount requested; this behavior is affected by the socket-level options SO_RCVLOWAT
and SO_RCVTIMEO described in getsockopt(2). The recvmmsg() function implements this
behaviour for each message in the vector.
The select(2) system call may be used to determine when more data arrives.
The flags argument to a recv() function is formed by or'ing one or more of the values:
MSG_OOB process out-of-band data
MSG_PEEK peek at incoming message
MSG_WAITALL wait for full request or error
MSG_DONTWAIT do not block
MSG_CMSG_CLOEXEC set received fds close-on-exec
MSG_WAITFORONE do not block after receiving the first message (only for
recvmmsg() )
The MSG_OOB flag requests receipt of out-of-band data that would not be received in the
normal data stream. Some protocols place expedited data at the head of the normal data
queue, and thus this flag cannot be used with such protocols. The MSG_PEEK flag causes the
receive operation to return data from the beginning of the receive queue without removing
that data from the queue. Thus, a subsequent receive call will return the same data. The
MSG_WAITALL flag requests that the operation block until the full request is satisfied.
However, the call may still return less data than requested if a signal is caught, an error
or disconnect occurs, or the next data to be received is of a different type than that
returned. The MSG_DONTWAIT flag requests the call to return when it would block otherwise.
If no data is available, errno is set to EAGAIN. This flag is not available in strict ANSI
or C99 compilation mode. The MSG_WAITFORONE flag sets MSG_DONTWAIT after the first message
has been received. This flag is only relevant for recvmmsg().
The recvmsg() system call uses a msghdr structure to minimize the number of directly
supplied arguments. This structure has the following form, as defined in <sys/socket.h>:
struct msghdr {
void *msg_name; /* optional address */
socklen_t msg_namelen; /* size of address */
struct iovec *msg_iov; /* scatter/gather array */
int msg_iovlen; /* # elements in msg_iov */
void *msg_control; /* ancillary data, see below */
socklen_t msg_controllen;/* ancillary data buffer len */
int msg_flags; /* flags on received message */
};
Here msg_name and msg_namelen specify the destination address if the socket is unconnected;
msg_name may be given as a null pointer if no names are desired or required. The msg_iov
and msg_iovlen arguments describe scatter gather locations, as discussed in read(2). The
msg_control argument, which has length msg_controllen, points to a buffer for other protocol
control related messages or other miscellaneous ancillary data. The messages are of the
form:
struct cmsghdr {
socklen_t cmsg_len; /* data byte count, including hdr */
int cmsg_level; /* originating protocol */
int cmsg_type; /* protocol-specific type */
/* followed by
u_char cmsg_data[]; */
};
As an example, one could use this to learn of changes in the data-stream in XNS/SPP, or in
ISO, to obtain user-connection-request data by requesting a recvmsg() with no data buffer
provided immediately after an accept() system call.
With AF_UNIX domain sockets, ancillary data can be used to pass file descriptors and process
credentials. See unix(4) for details.
The msg_flags field is set on return according to the message received. MSG_EOR indicates
end-of-record; the data returned completed a record (generally used with sockets of type
SOCK_SEQPACKET). MSG_TRUNC indicates that the trailing portion of a datagram was discarded
because the datagram was larger than the buffer supplied. MSG_CTRUNC indicates that some
control data were discarded due to lack of space in the buffer for ancillary data. MSG_OOB
is returned to indicate that expedited or out-of-band data were received.
The recvmmsg() system call uses the mmsghdr structure, defined as follows in the
<sys/socket.h> header :
struct mmsghdr {
struct msghdr msg_hdr; /* message header */
ssize_t msg_len; /* message length */
};
On data reception the msg_len field is updated to the length of the received message.
RETURN VALUES
These calls except recvmmsg() return the number of bytes received. recvmmsg() returns the
number of messages received. A value of -1 is returned if an error occurred.
ERRORS
The calls fail if:
[EBADF] The argument s is an invalid descriptor.
[ECONNRESET] The remote socket end is forcibly closed.
[ENOTCONN] The socket is associated with a connection-oriented protocol and has not
been connected (see connect(2) and accept(2)).
[ENOTSOCK] The argument s does not refer to a socket.
[EMSGSIZE] The recvmsg() system call was used to receive rights (file descriptors)
that were in flight on the connection. However, the receiving program
did not have enough free file descriptor slots to accept them. In this
case the descriptors are closed, any pending data can be returned by
another call to recvmsg().
[EAGAIN] The socket is marked non-blocking and the receive operation would block,
or a receive timeout had been set and the timeout expired before data
were received.
[EINTR] The receive was interrupted by delivery of a signal before any data were
available.
[EFAULT] The receive buffer pointer(s) point outside the process's address space.
SEE ALSO
fcntl(2), getsockopt(2), read(2), select(2), socket(2), unix(4)
HISTORY
The recv() function appeared in 4.2BSD. The recvmmsg() function appeared in FreeBSD 11.0.