bionic (3) Locale::Po4a::TransTractor.3pm.gz
NAME
Locale::Po4a::TransTractor - generic trans(lator ex)tractor.
DESCRIPTION
The po4a (PO for anything) project goal is to ease translations (and more interestingly, the maintenance
of translations) using gettext tools on areas where they were not expected like documentation.
This class is the ancestor of every po4a parser used to parse a document, to search translatable strings,
to extract them to a PO file and to replace them by their translation in the output document.
More formally, it takes the following arguments as input:
- a document to translate;
- a PO file containing the translations to use.
As output, it produces:
- another PO file, resulting of the extraction of translatable strings from the input document;
- a translated document, with the same structure than the one in input, but with all translatable strings
replaced with the translations found in the PO file provided in input.
Here is a graphical representation of this:
Input document --\ /---> Output document
\ / (translated)
+-> parse() function -----+
/ \
Input PO --------/ \---> Output PO
(extracted)
FUNCTIONS YOUR PARSER SHOULD OVERRIDE
parse()
This is where all the work takes place: the parsing of input documents, the generation of output, and
the extraction of the translatable strings. This is pretty simple using the provided functions
presented in the section INTERNAL FUNCTIONS below. See also the SYNOPSIS, which presents an example.
This function is called by the process() function below, but if you choose to use the new() function,
and to add content manually to your document, you will have to call this function yourself.
docheader()
This function returns the header we should add to the produced document, quoted properly to be a
comment in the target language. See the section Educating developers about translations, from
po4a(7), for what it is good for.
SYNOPSIS
The following example parses a list of paragraphs beginning with "<p>". For the sake of simplicity, we
assume that the document is well formatted, i.e. that '<p>' tags are the only tags present, and that this
tag is at the very beginning of each paragraph.
sub parse {
my $self = shift;
PARAGRAPH: while (1) {
my ($paragraph,$pararef)=("","");
my $first=1;
my ($line,$lref)=$self->shiftline();
while (defined($line)) {
if ($line =~ m/<p>/ && !$first--; ) {
# Not the first time we see <p>.
# Reput the current line in input,
# and put the built paragraph to output
$self->unshiftline($line,$lref);
# Now that the document is formed, translate it:
# - Remove the leading tag
$paragraph =~ s/^<p>//s;
# - push to output the leading tag (untranslated) and the
# rest of the paragraph (translated)
$self->pushline( "<p>"
. $document->translate($paragraph,$pararef)
);
next PARAGRAPH;
} else {
# Append to the paragraph
$paragraph .= $line;
$pararef = $lref unless(length($pararef));
}
# Reinit the loop
($line,$lref)=$self->shiftline();
}
# Did not get a defined line? End of input file.
return;
}
}
Once you've implemented the parse function, you can use your document class, using the public interface
presented in the next section.
PUBLIC INTERFACE for scripts using your parser
Constructor
process(%)
This function can do all you need to do with a po4a document in one invocation. Its arguments must be
packed as a hash. ACTIONS:
a. Reads all the PO files specified in po_in_name
b. Reads all original documents specified in file_in_name
c. Parses the document
d. Reads and applies all the addenda specified
e. Writes the translated document to file_out_name (if given)
f. Writes the extracted PO file to po_out_name (if given)
ARGUMENTS, beside the ones accepted by new() (with expected type):
file_in_name (@)
List of filenames where we should read the input document.
file_in_charset ($)
Charset used in the input document (if it isn't specified, it will try to detect it from the
input document).
file_out_name ($)
Filename where we should write the output document.
file_out_charset ($)
Charset used in the output document (if it isn't specified, it will use the PO file charset).
po_in_name (@)
List of filenames where we should read the input PO files from, containing the translation which
will be used to translate the document.
po_out_name ($)
Filename where we should write the output PO file, containing the strings extracted from the
input document.
addendum (@)
List of filenames where we should read the addenda from.
addendum_charset ($)
Charset for the addenda.
new(%)
Create a new po4a document. Accepted options (but be in a hash):
verbose ($)
Sets the verbosity.
debug ($)
Sets the debugging.
Manipulating document files
read($)
Add another input document at the end of the existing one. The argument is the filename to read.
Please note that it does not parse anything. You should use the parse() function when you're done
with packing input files into the document.
write($)
Write the translated document to the given filename.
Manipulating PO files
readpo($)
Add the content of a file (which name is passed as argument) to the existing input PO. The old
content is not discarded.
writepo($)
Write the extracted PO file to the given filename.
stats()
Returns some statistics about the translation done so far. Please note that it's not the same
statistics than the one printed by msgfmt --statistic. Here, it's stats about recent usage of the PO
file, while msgfmt reports the status of the file. It is a wrapper to the Locale::Po4a::Po::stats_get
function applied to the input PO file. Example of use:
[normal use of the po4a document...]
($percent,$hit,$queries) = $document->stats();
print "We found translations for $percent\% ($hit from $queries) of strings.\n";
is_po_uptodate()
Returns ($uptodate, $diagnostic) where $uptodate is whether the input po and the output po match (if
not, it means that the input po should be updated) and $diagnostic is a string explaining why the po
file is not uptodate, when this happens.
Manipulating addenda
addendum($)
Please refer to po4a(7) for more information on what addenda are, and how translators should write
them. To apply an addendum to the translated document, simply pass its filename to this function and
you are done ;)
This function returns a non-null integer on error.
INTERNAL FUNCTIONS used to write derivated parsers
Getting input, providing output
Four functions are provided to get input and return output. They are very similar to shift/unshift and
push/pop. The first pair is about input, while the second is about output. Mnemonic: in input, you are
interested in the first line, what shift gives, and in output you want to add your result at the end,
like push does.
shiftline()
This function returns the next line of the doc_in to be parsed and its reference (packed as an
array).
unshiftline($$)
Unshifts a line of the input document and its reference.
pushline($)
Push a new line to the doc_out.
popline()
Pop the last pushed line from the doc_out.
Marking strings as translatable
One function is provided to handle the text which should be translated.
translate($$$)
Mandatory arguments:
- A string to translate
- The reference of this string (i.e. position in inputfile)
- The type of this string (i.e. the textual description of its structural role; used in
Locale::Po4a::Po::gettextization(); see also po4a(7), section Gettextization: how does it work?)
This function can also take some extra arguments. They must be organized as a hash. For example:
$self->translate("string","ref","type",
'wrap' => 1);
wrap
boolean indicating whether we can consider that whitespaces in string are not important. If yes,
the function canonizes the string before looking for a translation or extracting it, and wraps
the translation.
wrapcol
the column at which we should wrap (default: 76).
comment
an extra comment to add to the entry.
Actions:
- Pushes the string, reference and type to po_out.
- Returns the translation of the string (as found in po_in) so that the parser can build the doc_out.
- Handles the charsets to recode the strings before sending them to po_out and before returning the
translations.
Misc functions
verbose()
Returns if the verbose option was passed during the creation of the TransTractor.
debug()
Returns if the debug option was passed during the creation of the TransTractor.
detected_charset($)
This tells TransTractor that a new charset (the first argument) has been detected from the input
document. It can usually be read from the document header. Only the first charset will remain, coming
either from the process() arguments or detected from the document.
get_out_charset()
This function will return the charset that should be used in the output document (usually useful to
substitute the input document's detected charset where it has been found).
It will use the output charset specified in the command line. If it wasn't specified, it will use the
input PO's charset, and if the input PO has the default "CHARSET", it will return the input
document's charset, so that no encoding is performed.
recode_skipped_text($)
This function returns the recoded text passed as argument, from the input document's charset to the
output document's one. This isn't needed when translating a string (translate() recodes everything
itself), but it is when you skip a string from the input document and you want the output document to
be consistent with the global encoding.
FUTURE DIRECTIONS
One shortcoming of the current TransTractor is that it can't handle translated document containing all
languages, like debconf templates, or .desktop files.
To address this problem, the only interface changes needed are:
- take a hash as po_in_name (a list per language)
- add an argument to translate to indicate the target language
- make a pushline_all function, which would make pushline of its content for all language, using a map-
like syntax:
$self->pushline_all({ "Description[".$langcode."]=".
$self->translate($line,$ref,$langcode)
});
Will see if it's enough ;)
AUTHORS
Denis Barbier <barbier@linuxfr.org> Martin Quinson (mquinson#debian.org) Jordi Vilalta <jvprat@gmail.com>