bionic (3) Term::TtyRec::Plus.3pm.gz
NAME
Term::TtyRec::Plus - read a ttyrec
SYNOPSIS
"Term::TtyRec::Plus" is a module that lets you read ttyrec files. The related module, Term::TtyRec is
designed more for simple interactions. "Term::TtyRec::Plus" gives you more information and, using a
callback, lets you munge the data block and timestamp. It will do all the subtle work of making sure
timing is kept consistent, and of rebuilding each frame header.
use Term::TtyRec::Plus;
# complete (but simple) ttyrec playback script
foreach my $file (@ARGV) {
my $ttyrec = Term::TtyRec::Plus->new(infile => $file, time_threshold => 10);
while (my $frame_ref = $ttyrec->next_frame()) {
select undef, undef, undef, $frame_ref->{diff};
print $frame_ref->{data};
}
}
CONSTRUCTOR AND STARTUP
new()
Creates and returns a new "Term::TtyRec::Plus" object.
my $ttyrec = Term::TtyRec::Plus->new();
Parameters
Here are the parameters that "Term::TtyRec::Plus->new()" recognizes.
infile
The input filename. A value of "-", which is the default, or "undef", means "STDIN".
filehandle
The input filehandle. By default this is "undef"; if you have already opened the ttyrec then you can
pass its filehandle to the constructor. If both filehandle and infile are defined, filehandle is
used.
bzip2
Perform bzip2 decompression. By default this is "undef", which signals that bzip2 decompression
should occur if and only if the filename is available and it ends in ".bz2". Otherwise, you can force
or forbid decompression by setting bzip2 to a true or false value, respectively. After the call to
new, this field will be set to either 1 if decompression is enabled or 0 if it is not.
time_threshold
The maximum difference between two frames, in seconds. If "undef", which is the default, there is no
enforced maximum. The second most common value would be 10, which some ttyrec utilities (such as
timettyrec) use.
frame_filter
A callback, run for each frame before returning the frame to the user of "Term::TtyRec::Plus". This
callback receives three arguments: the frame text, the timestamp, and the timestamp of the previous
frame. All three arguments are passed as scalar references. The previous frame's timestamp is "undef"
for the first frame. The return value is not currently looked at. If you modify the timestamp, the
module will make sure that change is noted and respected in further frame timestamps. Modifications
to the previous frame's timestamp are currently ignored.
sub halve_frame_time_and_stumblify {
my ($data_ref, $time_ref, $prev_ref) = @_;
$$time_ref = $$prev_ref + ($$time_ref - $$prev_ref) / 2
if defined $$prev_ref;
$$data_ref =~ s/Eidolos/Stumbly/g;
}
State
In addition to passing arguments, you can modify "Term::TtyRec::Plus"'s initial state, if you want to.
This could be useful if you are chaining multiple ttyrecs together; you could pass a different initial
frame. Support for such chaining might be added in a future version.
frame
The initial frame number. Default 0.
prev_timestamp
The previous frame's timestamp. Default "undef".
accum_diff
The accumulated difference of all frames seen so far; see the section on "diffed_timestamp" in
"next_frame()"'s return value. Default 0.
relative_time
The time passed since the first frame. Default 0.
METHODS
next_frame()
"next_frame()" reads and processes the next frame in the ttyrec. It accepts no arguments. On EOF, it will
return "undef". On malformed ttyrec input, it will die. If it cannot reconstruct the header of a frame
(which might happen if the callback sets the timestamp to -1, for example), it will die. Otherwise, a
hash reference is returned with the following fields set.
data
The frame data, filtered through the callback. The original data block is not made available.
orig_timestamp
The frame timestamp, straight out of the file.
diffed_timestamp
The frame timestamp, with the accumulated difference of all of the previous frames applied to it.
This is so consistent results are given. For example, if your callback adds three seconds to frame
5's timestamp, then frame 6's diffed timestamp will take into account those three seconds, so frame 6
happens three seconds later as well. So the net effect is frame 5 is extended by three seconds, and
no other frames' relatives times are affected.
timestamp
The diffed timestamp, filtered through the callback.
prev_timestamp
The previous frame's timestamp (after diffing and filtering; the originals are not made available).
diff
The difference between the current frame's timestamp and the previous frame's timestamp. Yes, it is
equivalent to "timestamp - prev_timestamp", but it is provided for convenience. On the first frame it
will be 0 (not "undef").
orig_header
The 12-byte frame header, straight from the file.
header
The 12-byte frame header, reconstructed from "data" and "timestamp" (so, after filtering, etc.).
frame
The frame number, using 1-based indexing.
relative_time
The time between the first frame's timestamp and the current frame's timestamp.
grep()
Returns the next frame that meets the specified criteria. "grep()" accepts arguments that are
subroutines, regex, or strings; anything else is a fatal error. If you pass multiple arguments to
"grep()", each one must be true. The subroutines receive the frame reference that is returned by
"next_frame()". You can modify the frame, but do so cautiously.
my $next_jump_frame_ref = $t->grep("Where do you want to jump?", sub { $_[0]{data} !~ /Message History/});
rewind()
Rewinds the ttyrec to the first frame and resets state variables to their initial values. Note that if
"filehandle" is not seekable (such as STDIN on some systems, or if bzip2 decompression is used),
"rewind()" will die.
infile()
Returns the infile passed to the constructor. If a filehandle was passed, this will be "undef".
filehandle()
Returns the filehandle passed to the constructor, or if "infile" was used, a handle to "infile".
bzip2()
Returns 1 if bzip2 decompression has taken place, 0 if it has not.
time_threshold()
Returns the time threshold passed to the constructor. By default it is "undef".
frame_filter()
Returns the frame filter callback passed to the constructor. By default it is "sub { @_ }".
frame()
Returns the frame number of the most recently returned frame.
prev_timestamp()
Returns the timestamp of the most recently returned frame.
relative_time()
Returns the time so far since the first frame.
accum_diff()
Returns the total time difference between timestamps and filtered timestamps. "accum_diff" is added to
each frame's timestamp before they are passed to the "frame_filter" callback.
AUTHOR
Shawn M Moore, "sartak@gmail.com"
CAVEATS
• Ttyrecs are frame-based. If you are trying to modify a string that is broken across multiple frames,
it will not work. Say you have a ttyrec that prints "foo" in frame one and "bar" in frame two, both
with the same timestamp. In a ttyrec player, it might look like these are one frame (with data
"foobar"), but it's not. There is no easy, complete way to add arbitrary substitutions; you would
have to write (or reuse) a terminal emulator.
• If you modify the data block, weird things could happen. This is especially true of escape-code-
littered ttyrecs (such as those of NetHack). For best results, pretend the data block is an
executable file; changes are OK as long as you do not change the length of the file. It really
depends on the ttyrec though.
• If you modify the timestamp of a frame so that it is not in sequence with other frames, the behavior
is undefined (it is up to the client program). "Term::TtyRec::Plus" will not reorder the frames for
you.
• bzip2 support is transparent, mostly. Unfortunately IO::Uncompress::Bunzip2 is rather slow. I took a
lengthy (~4 hours), bzipped ttyrec and ran a simple script on it, depending on the built-in bzip2
decompression. This took nearly four minutes. Using bunzip2 then the same script took about four
seconds. So when you can, do explicit bzip2 decompression. Or better yet, help out the guys working
on IO::Uncompress::Bunzip2. :)
COPYRIGHT & LICENSE
Copyright 2006-2009 Shawn M Moore, all rights reserved.
This program is free software; you can redistribute it and/or modify it under the same terms as Perl
itself.