Provided by: erlang-manpages_20.2.2+dfsg-1ubuntu2_all 
NAME
erl_connect - Communicate with distributed Erlang.
DESCRIPTION
This module provides support for communication between distributed Erlang nodes and C-nodes, in a manner
that is transparent to Erlang processes.
A C-node appears to Erlang as a hidden node. That is, Erlang processes that know the name of the C-node
can communicate with it in a normal manner, but the node name does not appear in the listing provided by
erlang:nodes/0 in ERTS.
EXPORTS
int erl_accept(listensock, conp)
Types:
int listensock;
ErlConnect *conp;
This function is used by a server process to accept a connection from a client process.
* listensock is an open socket descriptor on which listen() has previously been called.
* conp is a pointer to an ErlConnect struct, described as follows:
typedef struct {
char ipadr[4];
char nodename[MAXNODELEN];
} ErlConnect;
On success, conp is filled in with the address and node name of the connecting client and a file
descriptor is returned. On failure, ERL_ERROR is returned and erl_errno is set to EIO.
int erl_close_connection(fd)
Types:
int fd;
Closes an open connection to an Erlang node.
Fd is a file descriptor obtained from erl_connect() or erl_xconnect().
Returns 0 on success. If the call fails, a non-zero value is returned, and the reason for the
error can be obtained with the appropriate platform-dependent call.
int erl_connect(node)
int erl_xconnect(addr, alive)
Types:
char *node, *alive;
struct in_addr *addr;
Sets up a connection to an Erlang node.
erl_xconnect() requires the IP address of the remote host and the alivename of the remote node to
be specified. erl_connect() provides an alternative interface, and determines the information from
the node name provided.
* addr is the 32-bit IP address of the remote host.
* alive is the alivename of the remote node.
* node is the name of the remote node.
Returns an open file descriptor on success, otherwise a negative value. In the latter case
erl_errno is set to one of:
EHOSTUNREACH:
The remote host node is unreachable.
ENOMEM:
No more memory is available.
EIO:
I/O error.
Also, errno values from socket(2) and connect(2) system calls can be propagated into erl_errno.
Example:
#define NODE "madonna@chivas.du.etx.ericsson.se"
#define ALIVE "madonna"
#define IP_ADDR "150.236.14.75"
/*** Variant 1 ***/
erl_connect( NODE );
/*** Variant 2 ***/
struct in_addr addr;
addr = inet_addr(IP_ADDR);
erl_xconnect( &addr , ALIVE );
int erl_connect_init(number, cookie, creation)
int erl_connect_xinit(host, alive, node, addr, cookie, creation)
Types:
int number;
char *cookie;
short creation;
char *host,*alive,*node;
struct in_addr *addr;
Initializes the erl_connect module. In particular, these functions are used to identify the name
of the C-node from which they are called. One of these functions must be called before any of the
other functions in the erl_connect module are used.
erl_connect_xinit() stores for later use information about:
* Hostname of the node, host
* Alivename, alive
* Node name, node
* IP address, addr
* Cookie, cookie
* Creation number, creation
erl_connect_init() provides an alternative interface that does not require as much information
from the caller. Instead, erl_connect_init() uses gethostbyname() to obtain default values.
If you use erl_connect_init(), your node will have a short name, that is, it will not be fully
qualified. If you need to use fully qualified (long) names, use erl_connect_xinit() instead.
* host is the name of the host on which the node is running.
* alive is the alivename of the node.
* node is the node name. It is to be of the form alivename@hostname.
* addr is the 32-bit IP address of host.
* cookie is the authorization string required for access to the remote node. If NULL, the user
HOME directory is searched for a cookie file .erlang.cookie. The path to the home directory is
retrieved from environment variable HOME on Unix and from the HOMEDRIVE and HOMEPATH variables
on Windows. For more details, see the auth module in Kernel.
* creation helps identifying a particular instance of a C-node. In particular, it can help
prevent us from receiving messages sent to an earlier process with the same registered name.
A C-node acting as a server is assigned a creation number when it calls erl_publish().
number is used by erl_connect_init() to construct the actual node name. In Example 2 below,
"c17@a.DNS.name" is the resulting node name.
Example 1:
struct in_addr addr;
addr = inet_addr("150.236.14.75");
if (!erl_connect_xinit("chivas",
"madonna",
"madonna@chivas.du.etx.ericsson.se",
&addr;
"samplecookiestring..."),
0)
erl_err_quit("<ERROR> when initializing !");
Example 2:
if (!erl_connect_init(17, "samplecookiestring...", 0))
erl_err_quit("<ERROR> when initializing !");
int erl_publish(port)
Types:
int port;
This function is used by a server process to register with the local name server EPMD, thereby
allowing other processes to send messages by using the registered name. Before calling this
function, the process should have called bind() and listen() on an open socket.
port is the local name to register, and is to be the same as the port number that was previously
bound to the socket.
To unregister with EPMD, simply close the returned descriptor.
On success, a descriptor connecting the calling process to EPMD is returned. On failure, -1 is
returned and erl_errno is set to:
EIO:
I/O error.
Also, errno values from socket(2) and connect(2) system calls can be propagated into erl_errno.
int erl_receive(fd, bufp, bufsize)
Types:
int fd;
char *bufp;
int bufsize;
Receives a message consisting of a sequence of bytes in the Erlang external format.
* fd is an open descriptor to an Erlang connection.
* bufp is a buffer large enough to hold the expected message.
* bufsize indicates the size of bufp.
If a tick occurs, that is, the Erlang node on the other end of the connection has polled this node
to see if it is still alive, the function returns ERL_TICK and no message is placed in the buffer.
Also, erl_errno is set to EAGAIN.
On success, the message is placed in the specified buffer and the function returns the number of
bytes actually read. On failure, the function returns a negative value and sets erl_errno to one
of:
EAGAIN:
Temporary error: Try again.
EMSGSIZE:
Buffer is too small.
EIO:
I/O error.
int erl_receive_msg(fd, bufp, bufsize, emsg)
Types:
int fd;
unsigned char *bufp;
int bufsize;
ErlMessage *emsg;
Receives the message into the specified buffer and decodes into (ErlMessage *) emsg.
* fd is an open descriptor to an Erlang connection.
* bufp is a buffer large enough to hold the expected message.
* bufsize indicates the size of bufp.
* >emsg is a pointer to an ErlMessage structure into which the message will be decoded.
ErlMessage is defined as follows:
typedef struct {
int type;
ETERM *msg;
ETERM *to;
ETERM *from;
char to_name[MAXREGLEN];
} ErlMessage;
Note:
The definition of ErlMessage has changed since earlier versions of Erl_Interface.
type identifies the type of message, one of the following:
ERL_SEND:
An ordinary send operation has occurred and emsg->to contains the pid of the recipient. The
message is in emsg->msg.
ERL_REG_SEND:
A registered send operation has occurred and emsg->from contains the pid of the sender. The
message is in emsg->msg.
ERL_LINK or ERL_UNLINK:
emsg->to and emsg->from contain the pids of the sender and recipient of the link or unlink.
emsg->msg is not used.
ERL_EXIT:
A link is broken. emsg->to and emsg->from contain the pids of the linked processes, and
emsg->msg contains the reason for the exit.
Note:
It is the caller's responsibility to release the memory pointed to by emsg->msg, emsg->to, and
emsg->from.
If a tick occurs, that is, the Erlang node on the other end of the connection has polled this node
to see if it is still alive, the function returns ERL_TICK indicating that the tick has been
received and responded to, but no message is placed in the buffer. In this case you are to call
erl_receive_msg() again.
On success, the function returns ERL_MSG and the Emsg struct is initialized as described above, or
ERL_TICK, in which case no message is returned. On failure, the function returns ERL_ERROR and
sets erl_errno to one of:
EMSGSIZE:
Buffer is too small.
ENOMEM:
No more memory is available.
EIO:
I/O error.
int erl_reg_send(fd, to, msg)
Types:
int fd;
char *to;
ETERM *msg;
Sends an Erlang term to a registered process.
* fd is an open descriptor to an Erlang connection.
* to is a string containing the registered name of the intended recipient of the message.
* msg is the Erlang term to be sent.
Returns 1 on success, otherwise 0. In the latter case erl_errno is set to one of:
ENOMEM:
No more memory is available.
EIO:
I/O error.
ETERM *erl_rpc(fd, mod, fun, args)
int erl_rpc_from(fd, timeout, emsg)
int erl_rpc_to(fd, mod, fun, args)
Types:
int fd, timeout;
char *mod, *fun;
ETERM *args;
ErlMessage *emsg;
Supports calling Erlang functions on remote nodes. erl_rpc_to() sends an RPC request to a remote
node and erl_rpc_from() receives the results of such a call. erl_rpc() combines the functionality
of these two functions by sending an RPC request and waiting for the results. See also rpc:call/4
in Kernel.
* fd is an open descriptor to an Erlang connection.
* timeout is the maximum time (in milliseconds) to wait for results. To wait forever, specify
ERL_NO_TIMEOUT. When erl_rpc() calls erl_rpc_from(), the call will never timeout.
* mod is the name of the module containing the function to be run on the remote node.
* fun is the name of the function to run.
* args is an Erlang list, containing the arguments to be passed to the function.
* emsg is a message containing the result of the function call.
The actual message returned by the RPC server is a 2-tuple {rex,Reply}. If you use erl_rpc_from()
in your code, this is the message you will need to parse. If you use erl_rpc(), the tuple itself
is parsed for you, and the message returned to your program is the Erlang term containing Reply
only. Replies to RPC requests are always ERL_SEND messages.
Note:
It is the caller's responsibility to free the returned ETERM structure and the memory pointed to
by emsg->msg and emsg->to.
erl_rpc() returns the remote function's return value on success, otherwise NULL.
erl_rpc_to() returns 0 on success, otherwise a negative number.
erl_rcp_from() returns ERL_MSG on success (with Emsg now containing the reply tuple), otherwise
one of ERL_TICK, ERL_TIMEOUT, or ERL_ERROR.
When failing, all three functions set erl_errno to one of:
ENOMEM:
No more memory is available.
EIO:
I/O error.
ETIMEDOUT:
Timeout has expired.
EAGAIN:
Temporary error: Try again.
int erl_send(fd, to, msg)
Types:
int fd;
ETERM *to, *msg;
Sends an Erlang term to a process.
* fd is an open descriptor to an Erlang connection.
* to is an Erlang term containing the pid of the intended recipient of the message.
* >msg is the Erlang term to be sent.
Returns 1 on success, otherwise 0. In the latter case erl_errno is set to one of:
EINVAL:
Invalid argument: to is not a valid Erlang pid.
ENOMEM:
No more memory is available.
EIO:
I/O error.
const char *erl_thisalivename()
const char *erl_thiscookie()
short erl_thiscreation()
const char *erl_thishostname()
const char *erl_thisnodename()
Retrieves information about the C-node. These values are initially set with erl_connect_init() or
erl_connect_xinit().
int erl_unpublish(alive)
Types:
char *alive;
This function can be called by a process to unregister a specified node from EPMD on the local
host. This is, however, usually not allowed, unless EPMD was started with flag
-relaxed_command_check, which it normally is not.
To unregister a node you have published, you should instead close the descriptor that was returned
by ei_publish().
Warning:
This function is deprecated and will be removed in a future release.
alive is the name of the node to unregister, that is, the first component of the node name,
without @hostname.
If the node was successfully unregistered from EPMD, 0 is returned, otherwise -1 is returned and
erl_errno is set to EIO.
int erl_xreceive_msg(fd, bufpp, bufsizep, emsg)
Types:
int fd;
unsigned char **bufpp;
int *bufsizep;
ErlMessage *emsg;
Similar to erl_receive_msg. The difference is that erl_xreceive_msg expects the buffer to have
been allocated by malloc, and reallocates it if the received message does not fit into the
original buffer. Therefore both buffer and buffer length are given as pointers; their values can
change by the call.
On success, the function returns ERL_MSG and the Emsg struct is initialized as described above, or
ERL_TICK, in which case no message is returned. On failure, the function returns ERL_ERROR and
sets erl_errno to one of:
EMSGSIZE:
Buffer is too small.
ENOMEM:
No more memory is available.
EIO:
I/O error.
struct hostent *erl_gethostbyaddr(addr, length, type)
struct hostent *erl_gethostbyaddr_r(addr, length, type, hostp, buffer, buflen, h_errnop)
struct hostent *erl_gethostbyname(name)
struct hostent *erl_gethostbyname_r(name, hostp, buffer, buflen, h_errnop)
Types:
const char *name;
const char *addr;
int length;
int type;
struct hostent *hostp;
char *buffer;
int buflen;
int *h_errnop;
Convenience functions for some common name lookup functions.
DEBUG INFORMATION
If a connection attempt fails, the following can be checked:
* erl_errno
* That the correct cookie was used
* That EPMD is running
* That the remote Erlang node on the other side is running the same version of Erlang as the
erl_interface library
Ericsson AB erl_interface 3.10.1 erl_connect(3erl)