Provided by: manpages-posix-dev_2013a-2_all 
PROLOG
This manual page is part of the POSIX Programmer's Manual. The Linux implementation of this interface
may differ (consult the corresponding Linux manual page for details of Linux behavior), or the interface
may not be implemented on Linux.
NAME
freopen — open a stream
SYNOPSIS
#include <stdio.h> FILE *freopen(const char *restrict pathname, const char *restrict mode, FILE *restrict stream);
DESCRIPTION
The functionality described on this reference page is aligned with the ISO C standard. Any conflict
between the requirements described here and the ISO C standard is unintentional. This volume of
POSIX.1‐2008 defers to the ISO C standard.
The freopen() function shall first attempt to flush the stream associated with stream as if by a call to
fflush(stream). Failure to flush the stream successfully shall be ignored. If pathname is not a null
pointer, freopen() shall close any file descriptor associated with stream. Failure to close the file
descriptor successfully shall be ignored. The error and end-of-file indicators for the stream shall be
cleared.
The freopen() function shall open the file whose pathname is the string pointed to by pathname and
associate the stream pointed to by stream with it. The mode argument shall be used just as in fopen().
The original stream shall be closed regardless of whether the subsequent open succeeds.
If pathname is a null pointer, the freopen() function shall attempt to change the mode of the stream to
that specified by mode, as if the name of the file currently associated with the stream had been used. In
this case, the file descriptor associated with the stream need not be closed if the call to freopen()
succeeds. It is implementation-defined which changes of mode are permitted (if any), and under what
circumstances.
After a successful call to the freopen() function, the orientation of the stream shall be cleared, the
encoding rule shall be cleared, and the associated mbstate_t object shall be set to describe an initial
conversion state.
If pathname is not a null pointer, or if pathname is a null pointer and the specified mode change
necessitates the file descriptor associated with the stream to be closed and reopened, the file
descriptor associated with the reopened stream shall be allocated and opened as if by a call to open()
with the following flags:
┌─────────────────┬───────────────────────────┐
│ freopen() Mode │ open() Flags │
├─────────────────┼───────────────────────────┤
│r or rb │ O_RDONLY │
│w or wb │ O_WRONLY|O_CREAT|O_TRUNC │
│a or ab │ O_WRONLY|O_CREAT|O_APPEND │
│r+ or rb+ or r+b │ O_RDWR │
│w+ or wb+ or w+b │ O_RDWR|O_CREAT|O_TRUNC │
│a+ or ab+ or a+b │ O_RDWR|O_CREAT|O_APPEND │
└─────────────────┴───────────────────────────┘
RETURN VALUE
Upon successful completion, freopen() shall return the value of stream. Otherwise, a null pointer shall
be returned, and errno shall be set to indicate the error.
ERRORS
The freopen() function shall fail if:
EACCES Search permission is denied on a component of the path prefix, or the file exists and the
permissions specified by mode are denied, or the file does not exist and write permission is
denied for the parent directory of the file to be created.
EBADF The file descriptor underlying the stream is not a valid file descriptor when pathname is a null
pointer.
EINTR A signal was caught during freopen().
EISDIR The named file is a directory and mode requires write access.
ELOOP A loop exists in symbolic links encountered during resolution of the path argument.
EMFILE All file descriptors available to the process are currently open.
ENAMETOOLONG
The length of a component of a pathname is longer than {NAME_MAX}.
ENFILE The maximum allowable number of files is currently open in the system.
ENOENT The mode string begins with 'r' and a component of pathname does not name an existing file, or
mode begins with 'w' or 'a' and a component of the path prefix of pathname does not name an
existing file, or pathname is an empty string.
ENOENT or ENOTDIR
The pathname argument contains at least one non-<slash> character and ends with one or more
trailing <slash> characters. If pathname names an existing file, an [ENOENT] error shall not
occur.
ENOSPC The directory or file system that would contain the new file cannot be expanded, the file does not
exist, and it was to be created.
ENOTDIR
A component of the path prefix names an existing file that is neither a directory nor a symbolic
link to a directory, or the pathname argument contains at least one non-<slash> character and ends
with one or more trailing <slash> characters and the last pathname component names an existing
file that is neither a directory nor a symbolic link to a directory.
ENXIO The named file is a character special or block special file, and the device associated with this
special file does not exist.
EOVERFLOW
The named file is a regular file and the size of the file cannot be represented correctly in an
object of type off_t.
EROFS The named file resides on a read-only file system and mode requires write access.
The freopen() function may fail if:
EBADF The mode with which the file descriptor underlying the stream was opened does not support the
requested mode when pathname is a null pointer.
EINVAL The value of the mode argument is not valid.
ELOOP More than {SYMLOOP_MAX} symbolic links were encountered during resolution of the path argument.
ENAMETOOLONG
The length of a pathname exceeds {PATH_MAX}, or pathname resolution of a symbolic link produced an
intermediate result with a length that exceeds {PATH_MAX}.
ENOMEM Insufficient storage space is available.
ENXIO A request was made of a nonexistent device, or the request was outside the capabilities of the
device.
ETXTBSY
The file is a pure procedure (shared text) file that is being executed and mode requires write
access.
The following sections are informative.
EXAMPLES
Directing Standard Output to a File
The following example logs all standard output to the /tmp/logfile file.
#include <stdio.h>
...
FILE *fp;
...
fp = freopen ("/tmp/logfile", "a+", stdout);
...
APPLICATION USAGE
The freopen() function is typically used to attach the pre-opened streams associated with stdin, stdout,
and stderr to other files.
Since implementations are not required to support any stream mode changes when the pathname argument is
NULL, portable applications cannot rely on the use of freopen() to change the stream mode, and use of
this feature is discouraged. The feature was originally added to the ISO C standard in order to
facilitate changing stdin and stdout to binary mode. Since a 'b' character in the mode has no effect on
POSIX systems, this use of the feature is unnecessary in POSIX applications. However, even though the 'b'
is ignored, a successful call to freopen(NULL, "wb", stdout) does have an effect. In particular, for
regular files it truncates the file and sets the file-position indicator for the stream to the start of
the file. It is possible that these side-effects are an unintended consequence of the way the feature is
specified in the ISO/IEC 9899:1999 standard, but unless or until the ISO C standard is changed,
applications which successfully call freopen(NULL, "wb", stdout) will behave in unexpected ways on
conforming systems in situations such as:
{ appl file1; appl file2; } > file3
which will result in file3 containing only the output from the second invocation of appl.
RATIONALE
None.
FUTURE DIRECTIONS
None.
SEE ALSO
Section 2.5, Standard I/O Streams, fclose(), fdopen(), fflush(), fmemopen(), fopen(), mbsinit(), open(),
open_memstream()
The Base Definitions volume of POSIX.1‐2008, <stdio.h>
COPYRIGHT
Portions of this text are reprinted and reproduced in electronic form from IEEE Std 1003.1, 2013 Edition,
Standard for Information Technology -- Portable Operating System Interface (POSIX), The Open Group Base
Specifications Issue 7, Copyright (C) 2013 by the Institute of Electrical and Electronics Engineers, Inc
and The Open Group. (This is POSIX.1-2008 with the 2013 Technical Corrigendum 1 applied.) In the event
of any discrepancy between this version and the original IEEE and The Open Group Standard, the original
IEEE and The Open Group Standard is the referee document. The original Standard can be obtained online at
http://www.unix.org/online.html .
Any typographical or formatting errors that appear in this page are most likely to have been introduced
during the conversion of the source files to man page format. To report such errors, see
https://www.kernel.org/doc/man-pages/reporting_bugs.html .