Provided by: tcl8.6-doc_8.6.8+dfsg-3_all 
NAME
zlib - compression and decompression operations
SYNOPSIS
zlib subcommand arg ... ________________________________________________________________________________________________________________
DESCRIPTION
The zlib command provides access to the compression and check-summing facilities of the Zlib library by
Jean-loup Gailly and Mark Adler. It has the following subcommands.
COMPRESSION SUBCOMMANDS
zlib compress string ?level?
Returns the zlib-format compressed binary data of the binary string in string. If present, level
gives the compression level to use (from 0, which is uncompressed, to 9, maximally compressed).
zlib decompress string ?bufferSize?
Returns the uncompressed version of the raw compressed binary data in string. If present,
bufferSize is a hint as to what size of buffer is to be used to receive the data.
zlib deflate string ?level?
Returns the raw compressed binary data of the binary string in string. If present, level gives
the compression level to use (from 0, which is uncompressed, to 9, maximally compressed).
zlib gunzip string ?-headerVar varName?
Return the uncompressed contents of binary string string, which must have been in gzip format. If
-headerVar is given, store a dictionary describing the contents of the gzip header in the variable
called varName. The keys of the dictionary that may be present are:
comment
The comment field from the header, if present.
crc A boolean value describing whether a CRC of the header is computed.
filename
The filename field from the header, if present.
os The operating system type code field from the header (if not the QW unknown value). See RFC
1952 for the meaning of these codes.
size The size of the uncompressed data.
time The time field from the header if non-zero, expected to be time that the file named by the
filename field was modified. Suitable for use with clock format.
type The type of the uncompressed data (binary or text) if known.
zlib gzip string ?-level level? ?-header dict?
Return the compressed contents of binary string string in gzip format. If -level is given, level
gives the compression level to use (from 0, which is uncompressed, to 9, maximally compressed). If
-header is given, dict is a dictionary containing values used for the gzip header. The following
keys may be defined:
comment
Add the given comment to the header of the gzip-format data.
crc A boolean saying whether to compute a CRC of the header. Note that if the data is to be
interchanged with the gzip program, a header CRC should not be computed.
filename
The name of the file that the data to be compressed came from.
os The operating system type code, which should be one of the values described in RFC 1952.
time The time that the file named in the filename key was last modified. This will be in the
same as is returned by clock seconds or file mtime.
type The type of the data being compressed, being binary or text.
zlib inflate string ?bufferSize?
Returns the uncompressed version of the raw compressed binary data in string. If present,
bufferSize is a hint as to what size of buffer is to be used to receive the data.
CHANNEL SUBCOMMAND
zlib push mode channel ?options ...?
Pushes a compressing or decompressing transformation onto the channel channel. The transformation
can be removed again with chan pop. The mode argument determines what type of transformation is
pushed; the following are supported:
compress
The transformation will be a compressing transformation that produces zlib-format data on
channel, which must be writable.
decompress
The transformation will be a decompressing transformation that reads zlib-format data from
channel, which must be readable.
deflate
The transformation will be a compressing transformation that produces raw compressed data
on channel, which must be writable.
gunzip The transformation will be a decompressing transformation that reads gzip-format data from
channel, which must be readable.
gzip The transformation will be a compressing transformation that produces gzip-format data on
channel, which must be writable.
inflate
The transformation will be a decompressing transformation that reads raw compressed data
from channel, which must be readable.
The following options may be set when creating a transformation via the “options ...” to the zlib
push command:
-dictionary binData
Sets the compression dictionary to use when working with compressing or decompressing the │
data to be binData. Not valid for transformations that work with gzip-format data. The │
dictionary should consist of strings (byte sequences) that are likely to be encountered │
later in the data to be compressed, with the most commonly used strings preferably put │
towards the end of the dictionary. Tcl provides no mechanism for choosing a good such │
dictionary for a particular data sequence.
-header dictionary
Passes a description of the gzip header to create, in the same format that zlib gzip
understands.
-level compressionLevel
How hard to compress the data. Must be an integer from 0 (uncompressed) to 9 (maximally
compressed).
-limit readaheadLimit
The maximum number of bytes ahead to read when decompressing. This defaults to 1, which
ensures that data is always decompressed correctly, but may be increased to improve
performance. This is more useful when the channel is non-blocking.
Both compressing and decompressing channel transformations add extra configuration options that
may be accessed through chan configure. The options are:
-checksum checksum
This read-only option gets the current checksum for the uncompressed data that the
compression engine has seen so far. It is valid for both compressing and decompressing
transforms, but not for the raw inflate and deflate formats. The compression algorithm
depends on what format is being produced or consumed.
-dictionary binData
This read-write options gets or sets the initial compression dictionary to use when working │
with compressing or decompressing the data to be binData. It is not valid for │
transformations that work with gzip-format data, and should not normally be set on │
compressing transformations other than at the point where the transformation is stacked. │
Note that this cannot be used to get the current active compression dictionary mid-stream, │
as that information is not exposed by the underlying library.
-flush type
This write-only operation flushes the current state of the compressor to the underlying
channel. It is only valid for compressing transformations. The type must be either sync or
full for a normal flush or an expensive flush respectively. Flushing degrades the
compression ratio, but makes it easier for a decompressor to recover more of the file in
the case of data corruption.
-header dictionary
This read-only option, only valid for decompressing transforms that are processing gzip-
format data, returns the dictionary describing the header read off the data stream.
-limit readaheadLimit
This read-write option is used by decompressing channels to control the maximum number of
bytes ahead to read from the underlying data source. This defaults to 1, which ensures that
data is always decompressed correctly, but may be increased to improve performance. This is
more useful when the channel is non-blocking.
STREAMING SUBCOMMAND
zlib stream mode ?options?
Creates a streaming compression or decompression command based on the mode, and return the name of
the command. For a description of how that command works, see STREAMING INSTANCE COMMAND below.
The following modes and options are supported:
zlib stream compress ?-dictionary bindata? ?-level level?
The stream will be a compressing stream that produces zlib-format output, using compression
level level (if specified) which will be an integer from 0 to 9, and the compression │
dictionary bindata (if specified).
zlib stream decompress ?-dictionary bindata?
The stream will be a decompressing stream that takes zlib-format input and produces
uncompressed output. If bindata is supplied, it is a compression dictionary to use if │
required.
zlib stream deflate ?-dictionary bindata? ?-level level?
The stream will be a compressing stream that produces raw output, using compression level
level (if specified) which will be an integer from 0 to 9, and the compression dictionary │
bindata (if specified). Note that the raw compressed data includes no metadata about what │
compression dictionary was used, if any; that is a feature of the zlib-format data.
zlib stream gunzip
The stream will be a decompressing stream that takes gzip-format input and produces
uncompressed output.
zlib stream gzip ?-header header? ?-level level?
The stream will be a compressing stream that produces gzip-format output, using compression
level level (if specified) which will be an integer from 0 to 9, and the header descriptor
dictionary header (if specified; for keys see zlib gzip).
zlib stream inflate ?-dictionary bindata?
The stream will be a decompressing stream that takes raw compressed input and produces
uncompressed output. If bindata is supplied, it is a compression dictionary to use. Note │
that there are no checks in place to determine whether the compression dictionary is │
correct.
CHECKSUMMING SUBCOMMANDS
zlib adler32 string ?initValue?
Compute a checksum of binary string string using the Adler-32 algorithm. If given, initValue is
used to initialize the checksum engine.
zlib crc32 string ?initValue?
Compute a checksum of binary string string using the CRC-32 algorithm. If given, initValue is
used to initialize the checksum engine.
STREAMING INSTANCE COMMAND
Streaming compression instance commands are produced by the zlib stream command. They are used by calling
their put subcommand one or more times to load data in, and their get subcommand one or more times to
extract the transformed data.
The full set of subcommands supported by a streaming instance command, stream, is as follows:
stream add ?option...? data
A short-cut for “stream put ?option...? data” followed by “stream get”.
stream checksum
Returns the checksum of the uncompressed data seen so far by this stream.
stream close
Deletes this stream and frees up all resources associated with it.
stream eof
Returns a boolean indicating whether the end of the stream (as determined by the compressed data
itself) has been reached. Not all formats support detection of the end of the stream.
stream finalize
A short-cut for “stream put -finalize {}”.
stream flush
A short-cut for “stream put -flush {}”.
stream fullflush
A short-cut for “stream put -fullflush {}”.
stream get ?count?
Return up to count bytes from stream's internal buffers with the transformation applied. If count
is omitted, the entire contents of the buffers are returned. stream header Return the gzip header
description dictionary extracted from the stream. Only supported for streams created with their
mode parameter set to gunzip.
stream put ?option...? data
Append the contents of the binary string data to stream's internal buffers while applying the
transformation. The following options are supported (or an unambiguous prefix of them), which are
used to modify the way in which the transformation is applied:
-dictionary binData
Sets the compression dictionary to use when working with compressing or decompressing the │
data to be binData.
-finalize
Mark the stream as finished, ensuring that all bytes have been wholly compressed or
decompressed. For gzip streams, this also ensures that the footer is written to the stream.
The stream will need to be reset before having more data written to it after this, though
data can still be read out of the stream with the get subcommand.
This option is mutually exclusive with the -flush and -fullflush options.
-flush Ensure that a decompressor consuming the bytes that the current (compressing) stream is
producing will be able to produce all the bytes that have been compressed so far, at some
performance penalty.
This option is mutually exclusive with the -finalize and -fullflush options.
-fullflush
Ensure that not only can a decompressor handle all the bytes produced so far (as with
-flush above) but also that it can restart from this point if it detects that the stream is
partially corrupt. This incurs a substantial performance penalty.
This option is mutually exclusive with the -finalize and -flush options.
stream reset
Puts any stream, including those that have been finalized or that have reached eof, back into a
state where it can process more data. Throws away all internally buffered data.
EXAMPLES
To compress a Tcl string, it should be first converted to a particular charset encoding since the zlib
command always operates on binary strings.
set binData [encoding convertto utf-8 $string]
set compData [zlib compress $binData]
When converting back, it is also important to reverse the charset encoding:
set binData [zlib decompress $compData]
set string [encoding convertfrom utf-8 $binData]
The compression operation from above can also be done with streams, which is especially helpful when you
want to accumulate the data by stages:
set strm [zlib stream compress]
$strm put [encoding convertto utf-8 $string]
# ...
$strm finalize
set compData [$strm get]
$strm close
SEE ALSO
binary(3tcl), chan(3tcl), encoding(3tcl), Tcl_ZlibDeflate(3tcl), RFC1950 - RFC1952
KEYWORDS
compress, decompress, deflate, gzip, inflate, zlib