NAME

     sbni — Granch SBNI12 leased line modem driver

SYNOPSIS

     device sbni

DESCRIPTION

     The sbni driver provides support for leased line modems of following models:

     •   SBNI12-02, SBNI12D-02
     •   SBNI12-04, SBNI12D-04
     •   SBNI12-05, SBNI12D-05, ISA and PCI
     •   SBNI12-10, SBNI12D-10, ISA and PCI

     and a kit for data link over a voice band:

     •   SBNI12-11, SBNI12D-11, ISA and PCI.

     In addition to the standard port and IRQ specifications, the sbni driver also supports a
     number of flags which can set baud rate, receive level, and low three bytes of Ethernet MAC-
     address (high three are always 00:ff:01), because Granch modems are presented to the system
     as Ethernet-like network cards.

     The high byte of the flags is a bit field, it is used to specify SBNI adapter receive
     level/baud rate:

           Bits 0-3:  receive level (0x00..0x0f)

           Bits 4-5:  baud rate number:

                      00 - 0 baud rate (2Mb in fast mode/500kb in slow)
                      01 - 1 baud rate (1Mb/250kb)
                      10 - 2 baud rate (500kb/125kb)
                      11 - 3 baud rate (250kb/62.5kb)

           Bit 6:     use fixed receive level

                      if bit 6 is set then receive level will be set according to bits 0-3 value,
                      otherwise receive level will be autodetected

           Bit 7:     use fixed baud rate

                      if bit 7 is set then baud rate will be set according to bits 4-5 value,
                      otherwise baud rate is set to 2Mb

FILES

     The sources for the driver reside in:

     /sys/dev/sbni/if_sbni.c
     /sys/dev/sbni/if_sbnireg.h
     /sys/dev/sbni/if_sbnivar.h

SEE ALSO

     arp(4), netintro(4), ifconfig(8)

HISTORY

     The sbni device driver first appeared in FreeBSD 4.6.

AUTHORS

     The sbni device driver for FreeBSD 4.x was written by Denis I. Timofeev, partially based on
     David Greenman's ed(4) driver.  Earlier versions (available on ftp.granch.com) were written
     by Alexey V. Zverev.

     SBNI12 hardware was designed by Alexey V. Chirkov.