Provided by: freebsd-manpages_11.1-3_all bug

NAME
     mpt — LSI Fusion-MPT SCSI/Fibre Channel driver


SYNOPSIS
     To compile this driver into the kernel, place the following lines in your kernel
     configuration file:

           device scbus
           device mpt

     Alternatively, to load the driver as a module at boot time, place the following line in
     loader.conf(5):

           mpt_load="YES"


DESCRIPTION
     The mpt driver provides support for the LSI Logic Fusion-MPT family of SCSI, Fibre Channel
     and SAS controllers.


HARDWARE
     The following controllers are supported by the mpt driver:

     •   LSI Logic 53c1030, LSI Logic LSI2x320-X (Single and Dual Ultra320 SCSI)
     •   LSI Logic AS1064, LSI Logic AS1068 (SAS/SATA)
     •   LSI Logic FC909 (1Gb/s Fibre Channel)
     •   LSI Logic FC909A (Dual 1Gb/s Fibre Channel)
     •   LSI Logic FC919, LSI Logic 7102XP-LC (Single 2Gb/s Fibre Channel)
     •   LSI Logic FC929, LSI Logic FC929X, LSI Logic 7202XP-LC (Dual 2Gb/s Fibre Channel)
     •   LSI Logic FC949X (Dual 4Gb/s Fibre Channel)
     •   LSI Logic FC949E, LSI Logic FC949ES (Dual 4Gb/s Fibre Channel PCI-Express)

     The Ultra 320 SCSI controller chips supported by the mpt driver can be found onboard on many
     systems including:

     •   Dell PowerEdge 1750 thru 2850
     •   IBM eServer xSeries 335

     These systems also contain Integrated RAID Mirroring and Integrated RAID Mirroring Enhanced
     which this driver also supports.

     The SAS controller chips are also present on many new AMD/Opteron based systems, like the
     Sun 4100.  Note that this controller can drive both SAS and SATA drives or a mix of them at
     the same time.  The Integrated RAID Mirroring available for these controllers is poorly
     supported at best.

     The Fibre Channel controller chipset are supported by a broad variety of speeds and systems.
     The Apple Fibre Channel HBA is in fact the FC949ES card.

     This driver also supports target mode for Fibre Channel cards.  This support may be enabled
     by setting the desired role of the core via the LSI Logic firmware utility that establishes
     what roles the card can take on - no separate compilation is required.


SEE ALSO
     cd(4), ch(4), da(4), mps(4), pci(4), sa(4), scsi(4), targ(4), gmultipath(8), mptutil(8)

     LSI Logic Website, http://www.lsi.com/.


HISTORY
     The mpt driver first appeared in FreeBSD 4.6.


AUTHORS
     The mpt driver was originally written for FreeBSD by Greg Ansley and marginally improved
     upon by Matt Jacob <mjacob@FreeBSD.org>.

     Justin Gibbs <gibbs@FreeBSD.org> and Scott Long <scottl@FreeBSD.org> have made more
     substantial improvements.