NAME

     trm — Tekram TRM-S1040 ASIC based PCI SCSI host adapter driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel
     configuration file:

           device scbus
           device trm

     Alternatively, to load the driver as a module at boot time, place the following line in
     loader.conf(5):

           trm_load="YES"

DESCRIPTION

     The trm driver supports PCI SCSI host adapters based on the Tekram TRM-S1040 SCSI ASIC.

HARDWARE

     SCSI controllers supported by the trm driver include:

     •   Tekram DC-315 PCI Ultra SCSI adapter without BIOS and internal SCSI connector
     •   Tekram DC-315U PCI Ultra SCSI adapter without BIOS
     •   Tekram DC-395F PCI Ultra-Wide SCSI adapter with flash BIOS and 68-pin external SCSI
         connector
     •   Tekram DC-395U PCI Ultra SCSI adapter with flash BIOS
     •   Tekram DC-395UW PCI Ultra-Wide SCSI adapter with flash BIOS
     •   Tekram DC-395U2W PCI Ultra2-Wide SCSI adapter with flash BIOS

     For the Tekram DC-310/U and DC-390F/U/UW/U2B/U2W/U3W PCI SCSI host adapters, use the sym(4)
     driver.

SEE ALSO

     cd(4), ch(4), da(4), intro(4), sa(4), scsi(4), sym(4)

     http://www.tekram.com/

AUTHORS

     The trm driver was originally written for FreeBSD 3.0/i386 by Erich Chen of Tekram
     Technology, and ported to FreeBSD 5.0 by Olivier Houchard <cognet@FreeBSD.org>.