NAME

     uplcom — USB support for Prolific PL-2303/2303X/2303HX serial adapters driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel
     configuration file:

           device usb
           device ucom
           device uplcom

     Alternatively, to load the driver as a module at boot time, place the following line in
     loader.conf(5):

           uplcom_load="YES"

DESCRIPTION

     The uplcom driver provides support for various serial adapters based on the Prolific
     PL-2303, PL-2303X and PL-2303HX USB-to-RS232 Bridge chips.

     The device is accessed through the ucom(4) driver which makes it behave like a tty(4).

HARDWARE

     The uplcom driver supports the following devices and adapters:

     •   ADLINK ND-6530 USB-Serial Adapter
     •   Alcatel One Touch 535/735 Phone
     •   Alcor AU9720 USB-RS232 Serial Adapter
     •   AlDiga AL-11U Modem
     •   Alltronix ACM003U00 Modem
     •   Anchor Serial adapter
     •   ATEN UC-232A
     •   BAFO BF-800 and BF-810
     •   Belkin F5U257
     •   BenQ S81 Phone
     •   Corega CG-USBRS232R Serial Adapter
     •   Cressi Edy (Seiko) Diving Computer
     •   ELECOM UC-SGT Serial Adapter
     •   HAL Corporation Crossam2+USB IR commander
     •   Hama USB RS-232 Serial Adapter
     •   Hamlet exaggerate XURS232
     •   HP LD220 Point-Of-Sale (POS) Display
     •   IOGEAR UC-232A
     •   I/O DATA USB-RSAQ, USB-RSAQ2, USB-RSAQ3 and USB-RSAQ5
     •   iTegno WM1080A GSM/GFPRS Modem
     •   iTegno WM2080A CDMA Modem
     •   Leadtek 9531 GPS
     •   Micromax 610U Modem
     •   Microsoft Palm 700WX
     •   Mobile Action MA-620 Infrared Adapter
     •   Motorola Cables
     •   Nokia CA-42 Cable
     •   OTI DKU-5 cable
     •   Panasonic TY-TP50P6-S flat screen
     •   PLX CA-42 Phone Cable
     •   PLANEX USB-RS232 URS-03
     •   Prolific Generic USB-Serial Adapters
     •   Prolific Pharos USB-Serial Adapter
     •   RATOC REX-USB60
     •   Radio Shack USB Serial Cable
     •   Sagem USB-Serial Adapter
     •   Samsung I330 Phone Cradle
     •   Sandberg USB to Serial Link (model number 133-08)
     •   Sanwa KB-USB2 Multimeter cable
     •   Siemens/BenQ EF81, SX1, X65 and X75 Mobile Phones
     •   Sitecom USB-Serial Adapter
     •   SMART Technologies USB-Serial Adapter
     •   Sony QN3 Phone Cable
     •   Sony Ericsson Datapilot
     •   Sony Ericsson DCU-10 and DCU-11 (Susteen) USB Cables
     •   SOURCENEXT KeikaiDenwa 8 (with and without charger)
     •   Speed Dragon USB-Serial Cable
     •   Syntech CPT-8001C Barcode Scanner
     •   TDK UHA6400 and UPA9664 USB-PHS Adapters
     •   TRENDnet USB to Serial Converter (TU-S9)
     •   Tripp-Lite U209-000-R USB-Serial Adapter
     •   UIC HCR331 Magnetic Stripe Card Reader
     •   UIC MSR206 Magnetic Stripe Card Reader
     •   Willcom W-SIM DD PHS terminal.(WS002IN)
     •   YC-Cable USB-Serial Adapter
     •   Zeagle N2iTion3 Diving Computer

FILES

     /dev/ttyU*       for callin ports
     /dev/ttyU*.init
     /dev/ttyU*.lock  corresponding callin initial-state and lock-state devices

     /dev/cuaU*       for callout ports
     /dev/cuaU*.init
     /dev/cuaU*.lock  corresponding callout initial-state and lock-state devices

SEE ALSO

     tty(4), ucom(4), usb(4)

HISTORY

     The uplcom driver appeared in NetBSD 1.6.  This manual page was adopted from NetBSD by Tom
     Rhodes <trhodes@FreeBSD.org> in April 2002.