Provided by: network-manager_1.10.6-2ubuntu1.4_amd64 
NAME
NetworkManager.conf - NetworkManager configuration file
SYNOPSIS
/etc/NetworkManager/NetworkManager.conf, /etc/NetworkManager/conf.d/name.conf,
/run/NetworkManager/conf.d/name.conf, /usr/lib/NetworkManager/conf.d/name.conf,
/var/lib/NetworkManager/NetworkManager-intern.conf
DESCRIPTION
NetworkManager.conf is the configuration file for NetworkManager. It is used to set up
various aspects of NetworkManager's behavior. The location of the main file and
configuration directories may be changed through use of the --config, --config-dir,
--system-config-dir, and --intern-config argument for NetworkManager, respectively.
If a default NetworkManager.conf is provided by your distribution's packages, you should
not modify it, since your changes may get overwritten by package updates. Instead, you can
add additional .conf files to the /etc/NetworkManager/conf.d directory. These will be read
in order, with later files overriding earlier ones. Packages might install further
configuration snippets to /usr/lib/NetworkManager/conf.d. This directory is parsed first,
even before NetworkManager.conf. Scripts can also put per-boot configuration into
/run/NetworkManager/conf.d. This directory is parsed second, also before
NetworkManager.conf. The loading of a file /run/NetworkManager/conf.d/name.conf can be
prevented by adding a file /etc/NetworkManager/conf.d/name.conf. Likewise, a file
/usr/lib/NetworkManager/conf.d/name.conf can be shadowed by putting a file of the same
name to either /etc/NetworkManager/conf.d or /run/NetworkManager/conf.d.
NetworkManager can overwrite certain user configuration options via D-Bus or other
internal operations. In this case it writes those changes to
/var/lib/NetworkManager/NetworkManager-intern.conf. This file is not intended to be
modified by the user, but it is read last and can shadow user configuration from
NetworkManager.conf.
Certain settings from the configuration can be reloaded at runtime either by sending
SIGHUP signal or via D-Bus' Reload call.
FILE FORMAT
The configuration file format is so-called key file (sort of ini-style format). It
consists of sections (groups) of key-value pairs. Lines beginning with a '#' and blank
lines are considered comments. Sections are started by a header line containing the
section enclosed in '[' and ']', and ended implicitly by the start of the next section or
the end of the file. Each key-value pair must be contained in a section.
For keys that take a list of devices as their value, you can specify devices by their MAC
addresses or interface names, or "*" to specify all devices. See the section called
“Device List Format” below.
Minimal system settings configuration file looks like this:
[main]
plugins=keyfile
As an extension to the normal keyfile format, you can also append a value to a
previously-set list-valued key by doing:
plugins+=another-plugin
plugins-=remove-me
MAIN SECTION
plugins
Lists system settings plugin names separated by ','. These plugins are used to read
and write system-wide connections. When multiple plugins are specified, the
connections are read from all listed plugins. When writing connections, the plugins
will be asked to save the connection in the order listed here; if the first plugin
cannot write out that connection type (or can't write out any connections) the next
plugin is tried, etc. If none of the plugins can save the connection, an error is
returned to the user.
If NetworkManager defines a distro-specific network-configuration plugin for your
system, then that will normally be listed here. (See below for the available plugins.)
Note that the keyfile plugin is always appended to the end of this list (if it doesn't
already appear earlier in the list), so if there is no distro-specific plugin for your
system then you can leave this key unset and NetworkManager will fall back to using
keyfile.
monitor-connection-files
Whether the configured settings plugin(s) should set up file monitors and immediately
pick up changes made to connection files while NetworkManager is running. This is
disabled by default; NetworkManager will only read the connection files at startup,
and when explicitly requested via the ReloadConnections D-Bus call. If this key is set
to 'true', then NetworkManager will reload connection files any time they changed.
Automatic reloading is not advised because there are race conditions involved and it
depends on the way how the editor updates the file. In some situations, NetworkManager
might first delete and add the connection anew, instead of updating the existing one.
Also, NetworkManager might pick up incomplete settings while the user is still editing
the files.
auth-polkit
Whether the system uses PolicyKit for authorization. If false, all requests will be
allowed. If true, non-root requests are authorized using PolicyKit. The default value
is true.
dhcp
This key sets up what DHCP client NetworkManager will use. Allowed values are
dhclient, dhcpcd, and internal. The dhclient and dhcpcd options require the indicated
clients to be installed. The internal option uses a built-in DHCP client which is not
currently as featureful as the external clients.
If this key is missing, it defaults to dhclient. It the chosen plugin is not
available, clients are looked for in this order: dhclient, dhcpcd, internal.
no-auto-default
Specify devices for which NetworkManager shouldn't create default wired connection
(Auto eth0). By default, NetworkManager creates a temporary wired connection for any
Ethernet device that is managed and doesn't have a connection configured. List a
device in this option to inhibit creating the default connection for the device. May
have the special value * to apply to all devices.
When the default wired connection is deleted or saved to a new persistent connection
by a plugin, the device is added to a list in the file
/run/NetworkManager/no-auto-default.state to prevent creating the default connection
for that device again.
See the section called “Device List Format” for the syntax how to specify a device.
Example:
no-auto-default=00:22:68:5c:5d:c4,00:1e:65:ff:aa:ee
no-auto-default=eth0,eth1
no-auto-default=*
ignore-carrier
This setting is deprecated for the per-device setting ignore-carrier which overwrites
this setting if specified (See ignore-carrier). Otherwise, it is a list of matches to
specify for which device carrier should be ignored. See the section called “Device
List Format” for the syntax how to specify a device. Note that master types like bond,
bridge, and team ignore carrier by default. You can however revert that default using
the "except:" specifier (or better, use the per-device setting instead of the
deprecated setting).
assume-ipv6ll-only
Specify devices for which NetworkManager will try to generate a connection based on
initial configuration when the device only has an IPv6 link-local address.
See the section called “Device List Format” for the syntax how to specify a device.
configure-and-quit
When set to 'true', NetworkManager quits after performing initial network
configuration but spawns small helpers to preserve DHCP leases and IPv6 addresses.
This is useful in environments where network setup is more or less static or it is
desirable to save process time but still handle some dynamic configurations. When this
option is true, network configuration for WiFi, WWAN, Bluetooth, ADSL, and PPPoE
interfaces cannot be preserved due to their use of external services, and these
devices will be deconfigured when NetworkManager quits even though other interface's
configuration may be preserved. Also, to preserve DHCP addresses the 'dhcp' option
must be set to 'internal'. The default value of the 'configure-and-quit' option is
'false', meaning that NetworkManager will continue running after initial network
configuration and continue responding to system and hardware events, D-Bus requests,
and user commands.
hostname-mode
Set the management mode of the hostname. This parameter will affect only the transient
hostname. If a valid static hostname is set, NetworkManager will skip the update of
the hostname despite the value of this option. An hostname empty or equal to
'localhost', 'localhost6', 'localhost.localdomain' or 'localhost6.localdomain' is
considered invalid.
default: NetworkManager will update the hostname with the one provided via DHCP on the
main connection (the one with a default route). If not present, the hostname will be
updated to the last one set outside NetworkManager. If it is not valid, NetworkManager
will try to recover the hostname from the reverse lookup of the IP address of the main
connection. If this fails too, the hostname will be set to 'localhost.localdomain'.
dhcp: NetworkManager will update the transient hostname only with information coming
from DHCP. No fallback nor reverse lookup will be performed, but when the dhcp
connection providing the hostname is deactivated, the hostname is reset to the last
hostname set outside NetworkManager or 'localhost' if none valid is there.
none: NetworkManager will not manage the transient hostname and will never set it.
dns
Set the DNS (resolv.conf) processing mode. If the key is unspecified, default is used,
unless /etc/resolv.conf is a symlink to /run/systemd/resolve/resolv.conf,
/lib/systemd/resolv.conf or /usr/lib/systemd/resolv.conf. In that case,
systemd-resolved is chosen automatically.
default: NetworkManager will update /etc/resolv.conf to reflect the nameservers
provided by currently active connections.
dnsmasq: NetworkManager will run dnsmasq as a local caching nameserver, using a "split
DNS" configuration if you are connected to a VPN, and then update resolv.conf to point
to the local nameserver. It is possible to pass custom options to the dnsmasq instance
by adding them to files in the "/etc/NetworkManager/dnsmasq.d/" directory. Note that
when multiple upstream servers are available, dnsmasq will initially contact them in
parallel and then use the fastest to respond, probing again other servers after some
time. This behavior can be modified passing the 'all-servers' or 'strict-order'
options to dnsmasq (see the manual page for more details).
unbound: NetworkManager will talk to unbound and dnssec-triggerd, providing a "split
DNS" configuration with DNSSEC support. /etc/resolv.conf will be managed by
dnssec-trigger daemon.
systemd-resolved: NetworkManager will push the DNS configuration to systemd-resolved
none: NetworkManager will not modify resolv.conf. This implies rc-manager unmanaged
rc-manager
Set the resolv.conf management mode. The default value depends on NetworkManager build
options, and this version of NetworkManager was build with a default of "symlink".
Regardless of this setting, NetworkManager will always write resolv.conf to its
runtime state directory /run/NetworkManager/resolv.conf.
symlink: If /etc/resolv.conf is a regular file, NetworkManager will replace the file
on update. If /etc/resolv.conf is instead a symlink, NetworkManager will leave it
alone. Unless the symlink points to the internal file /run/NetworkManager/resolv.conf,
in which case the symlink will be updated to emit an inotify notification. This allows
the user to conveniently instruct NetworkManager not to manage /etc/resolv.conf by
replacing it with a symlink.
file: NetworkManager will write /etc/resolv.conf as file. If it finds a symlink, it
will follow the symlink and update the target instead.
resolvconf: NetworkManager will run resolvconf to update the DNS configuration.
netconfig: NetworkManager will run netconfig to update the DNS configuration.
unmanaged: don't touch /etc/resolv.conf.
none: deprecated alias for symlink.
debug
Comma separated list of options to aid debugging. This value will be combined with the
environment variable NM_DEBUG. Currently the following values are supported:
RLIMIT_CORE: set ulimit -c unlimited to write out core dumps. Beware, that a core dump
can contain sensitive information such as passwords or configuration settings.
fatal-warnings: set g_log_set_always_fatal() to core dump on warning messages from
glib. This is equivalent to the --g-fatal-warnings command line option.
autoconnect-retries-default
The number of times a connection activation should be automatically tried before
switching to another one. This value applies only to connections that can auto-connect
and have a connection.autoconnect-retries property set to -1. If not specified,
connections will be tried 4 times. Setting this value to 1 means to try activation
once, without retry.
slaves-order
This key specifies in which order slave connections are auto-activated on boot or when
the master activates them. Allowed values are name (order connection by interface
name, the default), or index (order slaves by their kernel index).
KEYFILE SECTION
This section contains keyfile-plugin-specific options, and is normally only used when you
are not using any other distro-specific plugin.
hostname
This key is deprecated and has no effect since the hostname is now stored in
/etc/hostname or other system configuration files according to build options.
path
The location where keyfiles are read and stored. This defaults to
"/etc/NetworkManager/system-connections".
unmanaged-devices
Set devices that should be ignored by NetworkManager.
See the section called “Device List Format” for the syntax how to specify a device.
Example:
unmanaged-devices=interface-name:em4
unmanaged-devices=mac:00:22:68:1c:59:b1;mac:00:1E:65:30:D1:C4;interface-name:eth2
IFUPDOWN SECTION
This section contains ifupdown-specific options and thus only has effect when using the
ifupdown plugin.
managed
If set to true, then interfaces listed in /etc/network/interfaces are managed by
NetworkManager. If set to false, then any interface listed in /etc/network/interfaces
will be ignored by NetworkManager. Remember that NetworkManager controls the default
route, so because the interface is ignored, NetworkManager may assign the default
route to some other interface.
The default value is false.
LOGGING SECTION
This section controls NetworkManager's logging. Any settings here are overridden by the
--log-level and --log-domains command-line options.
level
The default logging verbosity level. One of OFF, ERR, WARN, INFO, DEBUG, TRACE. The
ERR level logs only critical errors. WARN logs warnings that may reflect operation.
INFO logs various informational messages that are useful for tracking state and
operations. DEBUG enables verbose logging for debugging purposes. TRACE enables even
more verbose logging then DEBUG level. Subsequent levels also log all messages from
earlier levels; thus setting the log level to INFO also logs error and warning
messages.
domains
The following log domains are available: PLATFORM, RFKILL, ETHER, WIFI, BT, MB, DHCP4,
DHCP6, PPP, WIFI_SCAN, IP4, IP6, AUTOIP4, DNS, VPN, SHARING, SUPPLICANT, AGENTS,
SETTINGS, SUSPEND, CORE, DEVICE, OLPC, WIMAX, INFINIBAND, FIREWALL, ADSL, BOND, VLAN,
BRIDGE, DBUS_PROPS, TEAM, CONCHECK, DCB, DISPATCH, AUDIT, SYSTEMD, VPN_PLUGIN, PROXY.
In addition, these special domains can be used: NONE, ALL, DEFAULT, DHCP, IP.
You can specify per-domain log level overrides by adding a colon and a log level to
any domain. E.g., "WIFI:DEBUG,WIFI_SCAN:OFF".
Domain descriptions:
PLATFORM : OS (platform) operations
RFKILL : RFKill subsystem operations
ETHER : Ethernet device operations
WIFI : Wi-Fi device operations
BT : Bluetooth operations
MB : Mobile broadband operations
DHCP4 : DHCP for IPv4
DHCP6 : DHCP for IPv6
PPP : Point-to-point protocol operations
WIFI_SCAN : Wi-Fi scanning operations
IP4 : IPv4-related operations
IP6 : IPv6-related operations
AUTOIP4 : AutoIP operations
DNS : Domain Name System related operations
VPN : Virtual Private Network connections and operations
SHARING : Connection sharing. With TRACE level log queries for dnsmasq
instance
SUPPLICANT : WPA supplicant related operations
AGENTS : Secret agents operations and communication
SETTINGS : Settings/config service operations
SUSPEND : Suspend/resume
CORE : Core daemon and policy operations
DEVICE : Activation and general interface operations
OLPC : OLPC Mesh device operations
WIMAX : WiMAX device operations
INFINIBAND : InfiniBand device operations
FIREWALL : FirewallD related operations
ADSL : ADSL device operations
BOND : Bonding operations
VLAN : VLAN operations
BRIDGE : Bridging operations
DBUS_PROPS : D-Bus property changes
TEAM : Teaming operations
CONCHECK : Connectivity check
DCB : Data Center Bridging (DCB) operations
DISPATCH : Dispatcher scripts
AUDIT : Audit records
SYSTEMD : Messages from internal libsystemd
VPN_PLUGIN : logging messages from VPN plugins
PROXY : logging messages for proxy handling
NONE : when given by itself logging is disabled
ALL : all log domains
DEFAULT : default log domains
DHCP : shortcut for "DHCP4,DHCP6"
IP : shortcut for "IP4,IP6"
HW : deprecated alias for "PLATFORM"
In general, the logfile should not contain passwords or private data. However, you are
always advised to check the file before posting it online or attaching to a bug
report. VPN_PLUGIN is special as it might reveal private information of the VPN
plugins with verbose levels. Therefore this domain will be excluded when setting ALL
or DEFAULT to more verbose levels then INFO.
backend
The logging backend. Supported values are "debug", "syslog", "journal". "debug" uses
syslog and logs to standard error. If NetworkManager is started in debug mode
(--debug) this option is ignored and "debug" is always used. Otherwise, the default is
"journal".
audit
Whether the audit records are delivered to auditd, the audit daemon. If false, audit
records will be sent only to the NetworkManager logging system. If set to true, they
will be also sent to auditd. The default value is true.
CONNECTION SECTION
Specify default values for connections.
Example:
[connection]
ipv6.ip6-privacy=0
Supported Properties
Not all properties can be overwritten, only the following properties are supported to have
their default values configured (see nm-settings(5) for details). A default value is only
consulted if the corresponding per-connection value explicitly allows for that.
connection.auth-retries
If left unspecified, the default value is 3 tries before failing the connection.
connection.autoconnect-slaves
connection.lldp
connection.mdns
connection.stable-id
ethernet.cloned-mac-address
If left unspecified, it defaults to "preserve".
ethernet.generate-mac-address-mask
ethernet.mtu
If configured explicitly to 0, the MTU is not reconfigured during device activation
unless it is required due to IPv6 constraints. If left unspecified, a DHCP/IPv6 SLAAC
provided value is used or the MTU is not reconfigured during activation.
ethernet.wake-on-lan
infiniband.mtu
If configured explicitly to 0, the MTU is not reconfigured during device activation
unless it is required due to IPv6 constraints. If left unspecified, a DHCP/IPv6 SLAAC
provided value is used or the MTU is left unspecified on activation.
ip-tunnel.mtu
If configured explicitly to 0, the MTU is not reconfigured during device activation
unless it is required due to IPv6 constraints. If left unspecified, a DHCP/IPv6 SLAAC
provided value is used or a default of 1500.
ipv4.dad-timeout
ipv4.dhcp-timeout
If left unspecified, the default value for the interface type is used.
ipv4.route-metric
ipv4.route-table
If left unspecified, routes are only added to the main table. Note that this is
different from explicitly selecting the main table 254, because of how NetworkManager
removes extraneous routes from the tables.
ipv6.dhcp-timeout
If left unspecified, the default value for the interface type is used.
ipv6.ip6-privacy
If ipv6.ip6-privacy is unset, use the content of
"/proc/sys/net/ipv6/conf/default/use_tempaddr" as last fallback.
ipv6.route-metric
ipv6.route-table
If left unspecified, routes are only added to the main table. Note that this is
different from explicitly selecting the main table 254, because of how NetworkManager
removes extraneous routes from the tables.
vpn.timeout
If left unspecified, default value of 60 seconds is used.
wifi.cloned-mac-address
If left unspecified, it defaults to "preserve".
wifi.generate-mac-address-mask
wifi.mac-address-randomization
If left unspecified, MAC address randomization is disabled. This setting is deprecated
for wifi.cloned-mac-address.
wifi.mtu
If configured explicitly to 0, the MTU is not reconfigured during device activation
unless it is required due to IPv6 constraints. If left unspecified, a DHCP/IPv6 SLAAC
provided value is used or a default of 1500.
wifi.powersave
If left unspecified, the default value "ignore" will be used.
wifi-sec.pmf
If left unspecified, the default value "optional" will be used.
Sections
You can configure multiple connection sections, by having different sections with a name
that all start with "connection". Example:
[connection]
ipv6.ip6-privacy=0
connection.autoconnect-slaves=1
vpn.timeout=120
[connection-wifi-wlan0]
match-device=interface-name:wlan0
ipv4.route-metric=50
[connection-wifi-other]
match-device=type:wifi
ipv4.route-metric=55
ipv6.ip6-privacy=1
The sections within one file are considered in order of appearance, with the exception
that the [connection] section is always considered last. In the example above, this order
is [connection-wifi-wlan0], [connection-wlan-other], and [connection]. When checking for a
default configuration value, the sections are searched until the requested value is found.
In the example above, "ipv4.route-metric" for wlan0 interface is set to 50, and for all
other Wi-Fi typed interfaces to 55. Also, Wi-Fi devices would have IPv6 private addresses
enabled by default, but other devices would have it disabled. Note that also "wlan0" gets
"ipv6.ip6-privacy=1", because although the section "[connection-wifi-wlan0]" matches the
device, it does not contain that property and the search continues.
When having different sections in multiple files, sections from files that are read later
have higher priority. So within one file the priority of the sections is top-to-bottom.
Across multiple files later definitions take precedence.
The following properties further control how a connection section applies.
match-device
An optional device spec that restricts when the section applies. See the section
called “Device List Format” for the possible values.
stop-match
An optional boolean value which defaults to no. If the section matches (based on
match-device), further sections will not be considered even if the property in
question is not present. In the example above, if [connection-wifi-wlan0] would have
stop-match set to yes, the device wlan0 would have ipv6.ip6-privacy property
unspecified. That is, the search for the property would not continue in the connection
sections [connection-wifi-other] or [connection].
DEVICE SECTION
Contains per-device persistent configuration.
Example:
[device]
match-device=interface-name:eth3
managed=1
Supported Properties
The following properties can be configured per-device.
managed
Whether the device is managed or not. A device can be marked as managed via udev rules
(ENV{NM_UNMANAGED}), or via setting plugins (keyfile.unmanaged-devices). This is yet
another way. Note that this configuration can be overruled at runtime via D-Bus. Also,
it has higher priority then udev rules.
carrier-wait-timeout
Specify the timeout for waiting for carrier in milliseconds. When the device loses
carrier, NetworkManager does not react immediately. Instead, it waits for this timeout
before considering the link lost. Also, on startup, NetworkManager considers the
device as busy for this time, as long as the device has no carrier. This delays
startup-complete signal and NetworkManager-wait-online. Configuring this too high
means to block NetworkManager-wait-online longer then necessary. Configuring it too
low, means that NetworkManager will declare startup-complete, although carrier is
about to come and auto-activation to kick in. The default is 5000 milliseconds.
ignore-carrier
Specify devices for which NetworkManager will (partially) ignore the carrier state.
Normally, for device types that support carrier-detect, such as Ethernet and
InfiniBand, NetworkManager will only allow a connection to be activated on the device
if carrier is present (ie, a cable is plugged in), and it will deactivate the device
if carrier drops for more than a few seconds.
A device with carrier ignored will allow activating connections on that device even
when it does not have carrier, provided that the connection uses only
statically-configured IP addresses. Additionally, it will allow any active connection
(whether static or dynamic) to remain active on the device when carrier is lost.
Note that the "carrier" property of NMDevices and device D-Bus interfaces will still
reflect the actual device state; it's just that NetworkManager will not make use of
that information.
Master types like bond, bridge and team ignore carrier by default, while other device
types react on carrier changes by default.
This setting overwrites the deprecated main.ignore-carrier setting above.
wifi.scan-rand-mac-address
Configures MAC address randomization of a Wi-Fi device during scanning. This defaults
to yes in which case a random, locally-administered MAC address will be used. The
setting wifi.scan-generate-mac-address-mask allows to influence the generated MAC
address to use certain vendor OUIs. If disabled, the MAC address during scanning is
left unchanged to whatever is configured. For the configured MAC address while the
device is associated, see instead the per-connection setting wifi.cloned-mac-address.
wifi.scan-generate-mac-address-mask
Like the per-connection settings ethernet.generate-mac-address-mask and
wifi.generate-mac-address-mask, this allows to configure the generated MAC addresses
during scanning. See nm-settings(5) for details.
sriov-num-vfs
Specify the number of virtual functions (VF) to enable for a PCI physical device that
supports single-root I/O virtualization (SR-IOV).
Sections
The [device] section works the same as the [connection] section. That is, multiple
sections that all start with the prefix "device" can be specified. The settings
"match-device" and "stop-match" are available to match a device section on a device. The
order of multiple sections is also top-down within the file and later files overwrite
previous settings. See “Sections” under the section called “CONNECTION SECTION” for
details.
CONNECTIVITY SECTION
This section controls NetworkManager's optional connectivity checking functionality. This
allows NetworkManager to detect whether or not the system can actually access the internet
or whether it is behind a captive portal.
uri
The URI of a web page to periodically request when connectivity is being checked. This
page should return the header "X-NetworkManager-Status" with a value of "online".
Alternatively, it's body content should be set to "NetworkManager is online". The body
content check can be controlled by the response option. If this option is blank or
missing, connectivity checking is disabled.
interval
Specified in seconds; controls how often connectivity is checked when a network
connection exists. If set to 0 connectivity checking is disabled. If missing, the
default is 300 seconds.
response
If set controls what body content NetworkManager checks for when requesting the URI
for connectivity checking. If missing, defaults to "NetworkManager is online"
GLOBAL-DNS SECTION
This section specifies global DNS settings that override connection-specific
configuration.
searches
A list of search domains to be used during hostname lookup.
options
A list of of options to be passed to the hostname resolver.
GLOBAL-DNS-DOMAIN SECTIONS
Sections with a name starting with the "global-dns-domain-" prefix allow to define global
DNS configuration for specific domains. The part of section name after
"global-dns-domain-" specifies the domain name a section applies to. More specific domains
have the precedence over less specific ones and the default domain is represented by the
wildcard "*". A default domain section is mandatory.
servers
A list of addresses of DNS servers to be used for the given domain.
options
A list of domain-specific DNS options. Not used at the moment.
.CONFIG SECTIONS
This is a special section that contains options which apply to the configuration file that
contains the option.
enable
Defaults to "true". If "false", the configuration file will be skipped during loading.
Note that the main configuration file NetworkManager.conf cannot be disabled.
# always skip loading the config file
[.config]
enable=false
You can also match against the version of NetworkManager. For example the following
are valid configurations:
# only load on version 1.0.6
[.config]
enable=nm-version:1.0.6
# load on all versions 1.0.x, but not 1.2.x
[.config]
enable=nm-version:1.0
# only load on versions >= 1.1.6. This does not match
# with version 1.2.0 or 1.4.4. Only the last digit is considered.
[.config]
enable=nm-version-min:1.1.6
# only load on versions >= 1.2. Contrary to the previous
# example, this also matches with 1.2.0, 1.2.10, 1.4.4, etc.
[.config]
enable=nm-version-min:1.2
# Match against the maximum allowed version. The example matches
# versions 1.2.0, 1.2.2, 1.2.4. Again, only the last version digit
# is allowed to be smaller. So this would not match match on 1.1.10.
[.config]
enable=nm-version-max:1.2.6
You can also match against the value of the environment variable NM_CONFIG_ENABLE_TAG,
like:
# always skip loading the file when running NetworkManager with
# environment variable "NM_CONFIG_ENABLE_TAG=TAG1"
[.config]
enable=env:TAG1
More then one match can be specified. The configuration will be enabled if one of the
predicates matches ("or"). The special prefix "except:" can be used to negate the
match. Note that if one except-predicate matches, the entire configuration will be
disabled. In other words, a except predicate always wins over other predicates.
# enable the configuration either when the environment variable
# is present or the version is at least 1.2.0.
[.config]
enable=env:TAG2,nm-version-min:1.2
# enable the configuration for version >= 1.2.0, but disable
# it when the environment variable is set to "TAG3"
[.config]
enable=except:env:TAG3,nm-version-min:1.2
# enable the configuration on >= 1.3, >= 1.2.6, and >= 1.0.16.
# Useful if a certain feature is only present since those releases.
[.config]
enable=nm-version-min:1.3,nm-version-min:1.2.6,nm-version-min:1.0.16
PLUGINS
keyfile
The keyfile plugin is the generic plugin that supports all the connection types and
capabilities that NetworkManager has. It writes files out in an .ini-style format in
/etc/NetworkManager/system-connections.
The stored connection file may contain passwords, secrets and private keys in plain
text, so it will be made readable only to root, and the plugin will ignore files that
are readable or writable by any user or group other than root. See "Secret flag types"
in nm-settings(5) for how to avoid storing passwords in plain text.
This plugin is always active, and will automatically be used to store any connections
that aren't supported by any other active plugin.
ifcfg-rh
This plugin is used on the Fedora and Red Hat Enterprise Linux distributions to read
and write configuration from the standard /etc/sysconfig/network-scripts/ifcfg-*
files. It currently supports reading Ethernet, Wi-Fi, InfiniBand, VLAN, Bond, Bridge,
and Team connections. Enabling ifcfg-rh implicitly enables ibft plugin, if it is
available. This can be disabled by adding no-ibft.
ifcfg-suse
This plugin is deprecated and its selection has no effect. The keyfile plugin should
be used instead.
ifupdown
This plugin is used on the Debian and Ubuntu distributions, and reads Ethernet and
Wi-Fi connections from /etc/network/interfaces.
This plugin is read-only; any connections (of any type) added from within
NetworkManager when you are using this plugin will be saved using the keyfile plugin
instead.
ibft, no-ibft
This plugin allows to read iBFT configuration (iSCSI Boot Firmware Table). The
configuration is read using /sbin/iscsiadm. Users are expected to configure iBFT
connections via the firmware interfaces. If ibft support is available, it is
automatically enabled after ifcfg-rh. This can be disabled by no-ibft. You can also
explicitly specify ibft to load the plugin without ifcfg-rh or to change the plugin
order.
Note that ibft plugin uses /sbin/iscsiadm and thus requires CAP_SYS_ADMIN capability.
APPENDIX
Device List Format
The configuration options main.no-auto-default, main.ignore-carrier,
keyfile.unmanaged-devices, connection*.match-device and device*.match-device select
devices based on a list of matchings. Devices can be specified using the following format:
*
Matches every device.
IFNAME
Case sensitive match of interface name of the device. Globbing is not supported.
HWADDR
Match the permanent MAC address of the device. Globbing is not supported
interface-name:IFNAME, interface-name:~IFNAME
Case sensitive match of interface name of the device. Simple globbing is supported
with * and ?. Ranges and escaping is not supported.
interface-name:=IFNAME
Case sensitive match of interface name of the device. Globbing is disabled and IFNAME
is taken literally.
mac:HWADDR
Match the permanent MAC address of the device. Globbing is not supported
s390-subchannels:HWADDR
Match the device based on the subchannel address. Globbing is not supported
type:TYPE
Match the device type. Valid type names are as reported by "nmcli -f GENERAL.TYPE
device show". Globbing is not supported.
driver:DRIVER
Match the device driver as reported by "nmcli -f GENERAL.DRIVER,GENERAL.DRIVER-VERSION
device show". "DRIVER" must match the driver name exactly and does not support
globbing. Optionally, a driver version may be specified separated by '/'. Globbing is
supported for the version.
except:SPEC
Negative match of a device. SPEC must be explicitly qualified with a prefix such as
interface-name:. A negative match has higher priority then the positive matches above.
SPEC[,;]SPEC
Multiple specs can be concatenated with commas or semicolons. The order does not
matter as matches are either inclusive or negative (except:), with negative matches
having higher priority.
Backslash is supported to escape the separators ';' and ',', and to express special
characters such as newline ('\n'), tabulator ('\t'), whitespace ('\s') and backslash
('\\'). The globbing of interface names cannot be escaped. Whitespace is not a
separator but will be trimmed between two specs (unless escaped as '\s').
Example:
interface-name:em4
mac:00:22:68:1c:59:b1;mac:00:1E:65:30:D1:C4;interface-name:eth2
interface-name:vboxnet*,except:interface-name:vboxnet2
*,except:mac:00:22:68:1c:59:b1
SEE ALSO
NetworkManager(8), nmcli(1), nmcli-examples(7), nm-online(1), nm-settings(5), nm-
applet(1), nm-connection-editor(1)