bionic (5) freeipmi.conf.5.gz

Provided by: freeipmi-common_1.4.11-1.1ubuntu4.1_amd64 bug

NAME

       freeipmi.conf - specify default values to FreeIPMI

DESCRIPTION

       The  FreeIPMI  configuration  file  can be used to set alternate default values to many FreeIPMI tools so
       values don't have to be configured on the command line.  This allows users to avoid typing in a long list
       of  command  line  options  everytime  a  command  is  executed.  It  can also be used to hide usernames,
       passwords, and other sensitive information from the ps(1) command.

       Currently, the tools that can be configured with the configuration file are: bmc-device(8),  bmc-info(8),
       bmc-watchdog(8),  ipmi-chassis(8),  ipmi-config(8),  ipmi-fru(8),  ipmi-oem(8), ipmi-pet(8), ipmi-raw(8),
       ipmi-sel(8), ipmi-sensors(8), ipmiconsole(8), and ipmipower(8).

       By default, the configuration file is stored at /etc/freeipmi//freeipmi.conf.  But  users  may  select  a
       different configuration file at the command line with the --config-file option.

       Values  specified  on  the  command line override the configuration values specified in the configuration
       file.

FORMAT

       The configuration options that can be  specified  in  the  configuration  file  are  listed  below.  Each
       configuration  option  must  be  listed  on a separate line. Arguments for an option are separated by any
       amount of whitespace. Multiple arguments are also separated by whitespace.  Comments  can  be  marked  by
       using the pound sign ("#") character, and lines can be continued on the next using backslash ("\").

       Note  that  it  is possible to list the username, password and other potentially sensitive information in
       the configuration file. If this data is stored in a  configuration  file,  system  administrators  should
       limit access to this file.

GENERAL OPTIONS

       The  following  options  are  options  generally available to all tools, although specific options may be
       ignored by some. (For example, ipmiconsole(8) and ipmipower(8)  do  not  perform  in-band  communication,
       therefore  they  would  ignore  in-band communication options. Similarly bmc-watchdog(8) does not perform
       out-of-band communication, therefore it would ignore all out-of-band options).

       driver-type IPMIDRIVER
              Specify the default driver type to use.

       disable-auto-probe ENABLE|DISABLE
              Specify if IPMI devices should be probed for default settings.

       driver-address DRIVER-ADDRESS
              Specify the default in-band driver address to use.

       driver-device DEVICE
              Specify the default in-band driver device path to use.

       register-spacing REGISTER-SPACING
              Specify the default in-band driver register spacing to use.

       target-channel-number CHANNEL-NUMBER
              Specify the default in-band driver target channel number.

       target-slave-address SLAVE-ADDRESS
              Specify the default in-band driver target slave address.

       username USERNAME
              Specify the default username to use.

       password PASSWORD
              Specify the default password to use.

       k_g str
              Specify the default BMC key (K_g) to use. Prefix with '0x' to enter the key in hex.

       session-timeout MILLISECONDS
              Specify the default session timeout length to use in milliseconds.

       retransmission-timeout MILLISECONDS
              Specify the default retransmission timeout length to use in milliseconds.

       authentication-type AUTHENTICATION-TYPE
              Specify the default authentication type to use. The following authentication types are  supported:
              NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

       cipher-suite-id CIPHER-SUITE-ID
              Specify the default cipher suite id to use. The following cipher suite ids are supported: 0, 1, 2,
              3, 6, 7, 8, 11, 12.

       privilege-level PRIVILEGE-LEVEL
              Specify the default privilege type to use. The following privilege  levels  are  supported:  USER,
              OPERATOR, ADMIN.

       workaround-flags WORKAROUNDS
              Specify  default  workaround  flags  to  use.  Multiple  workarounds can be specified separated by
              whitespace. Please see tool manpages for details about available workarounds for  each  tool.  The
              following  workarounds  are  supported:  assumeio,  spinpoll, idzero, forcepermsg, unexpectedauth,
              endianseq, noauthcodecheck, authcap, nochecksumcheck, intel20, supermicro20, sun20,  opensesspriv,
              integritycheckvalue,      assumemaxsdrrecordcount,     solpayloadsize,     solport,     solstatus,
              solchannelsupport,    serialalertsdeferred,    solpacketseq,    skipchecks,     assumesystemevent,
              discretereading,     ignorescanningdisabled,     assumebmcowner,    ignoreauthcode,    slowcommit,
              veryslowcommit, solchannelassumelanchannel, ignorestateflag, malformedack, guidformat, ipmiping.

SDR OPTIONS

       The following options are specific to tools that use the sensor  data  repository  (SDR).  They  will  be
       ignored by all other tools.

       quiet-cache ENABLE|DISABLE
              Specify if cache creation/deletion information should not be output by default.

       sdr-cache-directory DIRECTORY
              Specify the default sdr cache directory to use.

TIME OPTIONS

       The  following  options  are  specific  to tools that may output time values. They will be ignored by all
       other tools.

       utc-to-localtime ENABLE|DISABLE
              Specify if time should be converted from assumed UTC to localtime by default.

       localtime-to-utc ENABLE|DISABLE
              Specify if time should be converted from localtime to UTC by default.

       utc-offset-fR SECONDS
              Specify a default UTC offset to be added to timestamps.

HOSTRANGED OPTIONS

       The following options are specific to tools that support hostranged output. They will be ignored  by  all
       other tools.

       buffer-output ENABLE|DISABLE
              Specify if hostranged output should be buffered by default.

       consolidate-output ENABLE|DISABLE
              Specify if hostranged output should be consolidated by default.

       fanout COUNT
              Specify the default multiple host fanout to use.

       eliminate ENABLE|DISABLE
              Specify if undetected hosts should be eliminated by default.

       always-prefix ENABLE|DISABLE
              Specify if output should be always prefixed by default.

BMC-DEVICE OPTIONS

       The following options are specific to bmc-device(8).  They will be ignored by other tools.

       bmc-device-username USERNAME
              Specify  the  default  username to use for bmc-device(8).  If specified, will override the general
              option username above.

       bmc-device-password PASSWORD
              Specify the default password to use for bmc-device(8).  If specified, will  override  the  general
              option password above.

       bmc-device-k_g str
              Specify  the  default  BMC  key  (K_g)  to use for bmc-device(8).  If specified, will override the
              general option k_g above. Prefix with '0x' to enter the key in hex.

       bmc-device-authentication-type AUTHENTICATION-TYPE
              Specify the default authentication type to use for bmc-device(8).  If specified, will override the
              general  option authentication-type above. The following authentication types are supported: NONE,
              STRAIGHT_PASSWORD_KEY, MD2, and MD5.

       bmc-device-cipher-suite-id CIPHER-SUITE-ID
              Specify the default cipher suite id to use for bmc-device(8).  If  specified,  will  override  the
              general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6,
              7, 8, 11, 12.

       bmc-device-privilege-level PRIVILEGE-LEVEL
              Specify the default privilege type to use for bmc-device(8).   If  specified,  will  override  the
              general  option  privilege-level  above.  The  following  privilege  levels  are  supported: USER,
              OPERATOR, ADMIN.

       bmc-device-workaround-flags WORKAROUNDS
              Specify default workaround flags to use  for  bmc-device(8).   If  specified,  will  override  the
              general  options  workaround-flags  above.  Multiple  workarounds  can  be  specified separated by
              whitespace.  Please see bmc-device(8) manpage for available workarounds.

BMC-INFO OPTIONS

       The following options are specific to bmc-info(8).  They will be ignored by other tools.

       bmc-info-username USERNAME
              Specify the default username to use for bmc-info(8).  If  specified,  will  override  the  general
              option username above.

       bmc-info-password PASSWORD
              Specify  the  default  password  to  use for bmc-info(8).  If specified, will override the general
              option password above.

       bmc-info-k_g str
              Specify the default BMC key (K_g) to use for bmc-info(8).  If specified, will override the general
              option k_g above. Prefix with '0x' to enter the key in hex.

       bmc-info-authentication-type AUTHENTICATION-TYPE
              Specify  the  default authentication type to use for bmc-info(8).  If specified, will override the
              general option authentication-type above. The following authentication types are supported:  NONE,
              STRAIGHT_PASSWORD_KEY, MD2, and MD5.

       bmc-info-cipher-suite-id CIPHER-SUITE-ID
              Specify  the  default  cipher  suite  id  to use for bmc-info(8).  If specified, will override the
              general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6,
              7, 8, 11, 12.

       bmc-info-privilege-level PRIVILEGE-LEVEL
              Specify  the  default  privilege  type  to  use  for bmc-info(8).  If specified, will override the
              general option  privilege-level  above.  The  following  privilege  levels  are  supported:  USER,
              OPERATOR, ADMIN.

       bmc-info-workaround-flags WORKAROUNDS
              Specify  default workaround flags to use for bmc-info(8).  If specified, will override the general
              options workaround-flags above. Multiple workarounds can be  specified  separated  by  whitespace.
              Please see bmc-info(8) manpage for available workarounds.

       bmc-info-interpret-oem-data ENABLE|DISABLE
              Specify if bmc-info should attempt to interpret OEM data by default or not.

BMC-WATCHDOG OPTIONS

       The following options are specific to bmc-watchdog(8).  They will be ignored by other tools.

       bmc-watchdog-workaround-flags WORKAROUNDS
              Specify  default  workaround  flags  to  use for bmc-watchdog(8).  If specified, will override the
              general options workaround-flags  above.  Multiple  workarounds  can  be  specified  separated  by
              whitespace.  Please see bmc-watchdog(8) manpage for available workarounds.

       bmc-watchdog-verbose-logging ENABLE|DISABLE
              Specify if logging will be verbose by default.

       bmc-watchdog-no-logging ENABLE|DISABLE
              Specify if logging will be disabled by default.

IPMI-CHASSIS OPTIONS

       The following options are specific to ipmi-chassis(8).  They will be ignored by other tools.

       ipmi-chassis-username USERNAME
              Specify  the default username to use for ipmi-chassis(8).  If specified, will override the general
              option username above.

       ipmi-chassis-password PASSWORD
              Specify the default password to use for ipmi-chassis(8).  If specified, will override the  general
              option password above.

       ipmi-chassis-k_g str
              Specify  the  default  BMC  key (K_g) to use for ipmi-chassis(8).  If specified, will override the
              general option k_g above. Prefix with '0x' to enter the key in hex.

       ipmi-chassis-authentication-type AUTHENTICATION-TYPE
              Specify the default authentication type to use for ipmi-chassis(8).  If specified,  will  override
              the  general  option  authentication-type above. The following authentication types are supported:
              NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

       ipmi-chassis-cipher-suite-id CIPHER-SUITE-ID
              Specify the default cipher suite id to use for ipmi-chassis(8).  If specified, will  override  the
              general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6,
              7, 8, 11, 12.

       ipmi-chassis-privilege-level PRIVILEGE-LEVEL
              Specify the default privilege type to use for ipmi-chassis(8).  If specified,  will  override  the
              general  option  privilege-level  above.  The  following  privilege  levels  are  supported: USER,
              OPERATOR, ADMIN.

       ipmi-chassis-workaround-flags WORKAROUNDS
              Specify default workaround flags to use for ipmi-chassis(8).   If  specified,  will  override  the
              general  options  workaround-flags  above.  Multiple  workarounds  can  be  specified separated by
              whitespace.  Please see ipmi-chassis(8) manpage for available workarounds.

IPMI-CONFIG OPTIONS

       The following options are specific to ipmi-config(8).  They will be ignored by other tools.

       ipmi-config-username USERNAME
              Specify the default username to use for ipmi-config(8).  If specified, will override  the  general
              option username above.

       ipmi-config-password PASSWORD
              Specify  the  default password to use for ipmi-config(8).  If specified, will override the general
              option password above.

       ipmi-config-k_g str
              Specify the default IPMI key (K_g) to use for ipmi-config(8).  If  specified,  will  override  the
              general option k_g above. Prefix with '0x' to enter the key in hex.

       ipmi-config-authentication-type AUTHENTICATION-TYPE
              Specify  the  default  authentication type to use for ipmi-config(8).  If specified, will override
              the general option authentication-type above. The following authentication  types  are  supported:
              NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

       ipmi-config-cipher-suite-id CIPHER-SUITE-ID
              Specify  the  default  cipher suite id to use for ipmi-config(8).  If specified, will override the
              general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6,
              7, 8, 11, 12.

       ipmi-config-privilege-level PRIVILEGE-LEVEL
              Specify  the  default  privilege  type to use for ipmi-config(8).  If specified, will override the
              general option  privilege-level  above.  The  following  privilege  levels  are  supported:  USER,
              OPERATOR, ADMIN.

       ipmi-config-workaround-flags WORKAROUNDS
              Specify  default  workaround  flags  to  use  for ipmi-config(8).  If specified, will override the
              general options workaround-flags  above.  Multiple  workarounds  can  be  specified  separated  by
              whitespace.  Please see ipmi-config(8) manpage for available workarounds.

       ipmi-config-verbose-count COUNT
              Specify default verbose count to use for ipmi-config(8).

IPMI-DCMI OPTIONS

       The following options are specific to ipmi-dcmi(8).  They will be ignored by other tools.

       ipmi-dcmi-username USERNAME
              Specify  the  default  username  to use for ipmi-dcmi(8).  If specified, will override the general
              option username above.

       ipmi-dcmi-password PASSWORD
              Specify the default password to use for ipmi-dcmi(8).  If specified,  will  override  the  general
              option password above.

       ipmi-dcmi-k_g str
              Specify  the  default  BMC  key  (K_g)  to  use for ipmi-dcmi(8).  If specified, will override the
              general option k_g above. Prefix with '0x' to enter the key in hex.

       ipmi-dcmi-authentication-type AUTHENTICATION-TYPE
              Specify the default authentication type to use for ipmi-dcmi(8).  If specified, will override  the
              general  option authentication-type above. The following authentication types are supported: NONE,
              STRAIGHT_PASSWORD_KEY, MD2, and MD5.

       ipmi-dcmi-cipher-suite-id CIPHER-SUITE-ID
              Specify the default cipher suite id to use for ipmi-dcmi(8).   If  specified,  will  override  the
              general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6,
              7, 8, 11, 12.

       ipmi-dcmi-privilege-level PRIVILEGE-LEVEL
              Specify the default privilege type to use for  ipmi-dcmi(8).   If  specified,  will  override  the
              general  option  privilege-level  above.  The  following  privilege  levels  are  supported: USER,
              OPERATOR, ADMIN.

       ipmi-dcmi-workaround-flags WORKAROUNDS
              Specify default workaround flags to use for ipmi-dcmi(8).  If specified, will override the general
              options  workaround-flags  above.  Multiple  workarounds can be specified separated by whitespace.
              Please see ipmi-dcmi(8) manpage for available workarounds.

       ipmi-dcmi-interpret-oem-data ENABLE|DISABLE
              Specify if ipmi-dcmi should attempt to interpret OEM data by default or not.

IPMI-FRU OPTIONS

       The following options are specific to ipmi-fru(8).  They will be ignored by other tools.

       ipmi-fru-username USERNAME
              Specify the default username to use for ipmi-fru(8).  If  specified,  will  override  the  general
              option username above.

       ipmi-fru-password PASSWORD
              Specify  the  default  password  to  use for ipmi-fru(8).  If specified, will override the general
              option password above.

       ipmi-fru-k_g str
              Specify the default BMC key (K_g) to use for ipmi-fru(8).  If specified, will override the general
              option k_g above. Prefix with '0x' to enter the key in hex.

       ipmi-fru-authentication-type AUTHENTICATION-TYPE
              Specify  the  default authentication type to use for ipmi-fru(8).  If specified, will override the
              general option authentication-type above. The following authentication types are supported:  NONE,
              STRAIGHT_PASSWORD_KEY, MD2, and MD5.

       ipmi-fru-cipher-suite-id CIPHER-SUITE-ID
              Specify  the  default  cipher  suite  id  to use for ipmi-fru(8).  If specified, will override the
              general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6,
              7, 8, 11, 12.

       ipmi-fru-privilege-level PRIVILEGE-LEVEL
              Specify  the  default  privilege  type  to  use  for ipmi-fru(8).  If specified, will override the
              general option  privilege-level  above.  The  following  privilege  levels  are  supported:  USER,
              OPERATOR, ADMIN.

       ipmi-fru-workaround-flags WORKAROUNDS
              Specify  default workaround flags to use for ipmi-fru(8).  If specified, will override the general
              options workaround-flags above. Multiple workarounds can be  specified  separated  by  whitespace.
              Please see ipmi-fru(8) manpage for available workarounds.

       ipmi-fru-verbose-count COUNT
              Specify default verbose count to use for ipmi-fru(8).

       ipmi-fru-bridge-fru ENABLE|DISABLE
              Specify if FRU entries on other controllers should be read by default or not.

       ipmi-fru-interpret-oem-data ENABLE|DISABLE
              Specify if ipmi-fru should attempt to interpret OEM data by default or not.

IPMI-OEM OPTIONS

       The following options are specific to ipmi-oem(8).  They will be ignored by other tools.

       ipmi-oem-username USERNAME
              Specify  the  default  username  to  use for ipmi-oem(8).  If specified, will override the general
              option username above.

       ipmi-oem-password PASSWORD
              Specify the default password to use for ipmi-oem(8).  If  specified,  will  override  the  general
              option password above.

       ipmi-oem-k_g str
              Specify the default BMC key (K_g) to use for ipmi-oem(8).  If specified, will override the general
              option k_g above. Prefix with '0x' to enter the key in hex.

       ipmi-oem-authentication-type AUTHENTICATION-TYPE
              Specify the default authentication type to use for ipmi-oem(8).  If specified, will  override  the
              general  option authentication-type above. The following authentication types are supported: NONE,
              STRAIGHT_PASSWORD_KEY, MD2, and MD5.

       ipmi-oem-cipher-suite-id CIPHER-SUITE-ID
              Specify the default cipher suite id to use for  ipmi-oem(8).   If  specified,  will  override  the
              general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6,
              7, 8, 11, 12.

       ipmi-oem-privilege-level PRIVILEGE-LEVEL
              Specify the default privilege type to use  for  ipmi-oem(8).   If  specified,  will  override  the
              general  option  privilege-level  above.  The  following  privilege  levels  are  supported: USER,
              OPERATOR, ADMIN.

       ipmi-oem-workaround-flags WORKAROUNDS
              Specify default workaround flags to use for ipmi-oem(8).  If specified, will override the  general
              options  workaround-flags  above.  Multiple  workarounds can be specified separated by whitespace.
              Please see ipmi-oem(8) manpage for available workarounds.

       ipmi-oem-verbose-count COUNT
              Specify default verbose count to use for ipmi-oem(8).

IPMI-PET OPTIONS

       The following options are specific to ipmi-pet(8).  They will be ignored by other tools.

       ipmi-pet-username USERNAME
              Specify the default username to use for ipmi-pet(8).  If  specified,  will  override  the  general
              option username above.

       ipmi-pet-password PASSWORD
              Specify  the  default  password  to  use for ipmi-pet(8).  If specified, will override the general
              option password above.

       ipmi-pet-k_g str
              Specify the default BMC key (K_g) to use for ipmi-pet(8).  If specified, will override the general
              option k_g above. Prefix with '0x' to enter the key in hex.

       ipmi-pet-authentication-type AUTHENTICATION-TYPE
              Specify  the  default authentication type to use for ipmi-pet(8).  If specified, will override the
              general option authentication-type above. The following authentication types are supported:  NONE,
              STRAIGHT_PASSWORD_KEY, MD2, and MD5.

       ipmi-pet-cipher-suite-id CIPHER-SUITE-ID
              Specify  the  default  cipher  suite  id  to use for ipmi-pet(8).  If specified, will override the
              general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6,
              7, 8, 11, 12.

       ipmi-pet-privilege-level PRIVILEGE-LEVEL
              Specify  the  default  privilege  type  to  use  for ipmi-pet(8).  If specified, will override the
              general option  privilege-level  above.  The  following  privilege  levels  are  supported:  USER,
              OPERATOR, ADMIN.

       ipmi-pet-workaround-flags WORKAROUNDS
              Specify  default workaround flags to use for ipmi-pet(8).  If specified, will override the general
              options workaround-flags above. Multiple workarounds can be  specified  separated  by  whitespace.
              Please see ipmi-pet(8) manpage for available workarounds.

       ipmi-pet-verbose-count COUNT
              Specify default verbose count to use for ipmi-pet(8).

       ipmi-pet-output-event-severity ENABLE|DISABLE
              Specify if ipmi-pet should output the event severity state by default.

       ipmi-pet-output-event-state ENABLE|DISABLE
              Specify if ipmi-pet should output the event state state by default.

       ipmi-pet-event-state-config-file FILE
              Specify the default event state configuration file.

       ipmi-pet-interpret-oem-data ENABLE|DISABLE
              Specify if ipmi-pet should attempt to interpret OEM data by default or not.

       ipmi-pet-entity-sensor-names ENABLE|DISABLE
              Specify if output of sensor names should include entity ids and instances by default or not.

       ipmi-pet-no-sensor-type-output ENABLE|DISABLE
              Specify if output of the sensor type should be output by default or not.

       ipmi-pet-comma-separated-output ENABLE|DISABLE
              Specify if output should be comma separated by default or not.

       ipmi-pet-no-header-output ENABLE|DISABLE
              Specify if column headers should be output by default or not.

       ipmi-pet-non-abbreviated-units ENABLE|DISABLE
              Specify if output should have units abbreviated by default or not.

IPMI-RAW OPTIONS

       The following options are specific to ipmi-raw(8).  They will be ignored by other tools.

       ipmi-raw-username USERNAME
              Specify  the  default  username  to  use for ipmi-raw(8).  If specified, will override the general
              option username above.

       ipmi-raw-password PASSWORD
              Specify the default password to use for ipmi-raw(8).  If  specified,  will  override  the  general
              option password above.

       ipmi-raw-k_g str
              Specify the default BMC key (K_g) to use for ipmi-raw(8).  If specified, will override the general
              option k_g above. Prefix with '0x' to enter the key in hex.

       ipmi-raw-authentication-type AUTHENTICATION-TYPE
              Specify the default authentication type to use for ipmi-raw(8).  If specified, will  override  the
              general  option authentication-type above. The following authentication types are supported: NONE,
              STRAIGHT_PASSWORD_KEY, MD2, and MD5.

       ipmi-raw-cipher-suite-id CIPHER-SUITE-ID
              Specify the default cipher suite id to use for  ipmi-raw(8).   If  specified,  will  override  the
              general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6,
              7, 8, 11, 12.

       ipmi-raw-privilege-level PRIVILEGE-LEVEL
              Specify the default privilege type to use  for  ipmi-raw(8).   If  specified,  will  override  the
              general  option  privilege-level  above.  The  following  privilege  levels  are  supported: USER,
              OPERATOR, ADMIN.

       ipmi-raw-workaround-flags WORKAROUNDS
              Specify default workaround flags to use for ipmi-raw(8).  If specified, will override the  general
              options  workaround-flags  above.  Multiple  workarounds can be specified separated by whitespace.
              Please see ipmi-raw(8) manpage for available workarounds.

IPMI-SEL OPTIONS

       The following options are specific to ipmi-sel(8).  They will be ignored by other tools.

       ipmi-sel-username USERNAME
              Specify the default username to use for ipmi-sel(8).  If  specified,  will  override  the  general
              option username above.

       ipmi-sel-password PASSWORD
              Specify  the  default  password  to  use for ipmi-sel(8).  If specified, will override the general
              option password above.

       ipmi-sel-k_g str
              Specify the default BMC key (K_g) to use for ipmi-sel(8).  If specified, will override the general
              option k_g above. Prefix with '0x' to enter the key in hex.

       ipmi-sel-authentication-type AUTHENTICATION-TYPE
              Specify  the  default authentication type to use for ipmi-sel(8).  If specified, will override the
              general option authentication-type above. The following authentication types are supported:  NONE,
              STRAIGHT_PASSWORD_KEY, MD2, and MD5.

       ipmi-sel-cipher-suite-id CIPHER-SUITE-ID
              Specify  the  default  cipher  suite  id  to use for ipmi-sel(8).  If specified, will override the
              general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6,
              7, 8, 11, 12.

       ipmi-sel-privilege-level PRIVILEGE-LEVEL
              Specify  the  default  privilege  type  to  use  for ipmi-sel(8).  If specified, will override the
              general option  privilege-level  above.  The  following  privilege  levels  are  supported:  USER,
              OPERATOR, ADMIN.

       ipmi-sel-workaround-flags WORKAROUNDS
              Specify  default workaround flags to use for ipmi-sel(8).  If specified, will override the general
              options workaround-flags above. Multiple workarounds can be  specified  separated  by  whitespace.
              Please see ipmi-sel(8) manpage for available workarounds.

       ipmi-sel-verbose-count COUNT
              Specify default verbose count to use for ipmi-sel(8).

       ipmi-sel-types TYPE-LIST
              Specify  default  types  to  show  SEL  events  for.  Multiple types can be specified separated by
              whitespace. Users may specify sensor types by string or by number (decimal  or  hex).  Please  see
              ipmi-sel(8) --list-types option to see possible string input types.

       ipmi-sel-exclude-types ENSOR-TYPES-LIST Specify
              default  sensor types to not show SEL events for. Multiple sensor types can be specified separated
              by whitespace. Users may specify sensor types by string  or  by  number.  Please  see  ipmi-sel(8)
              --list-types option to see possible string input types.

       ipmi-sel-system-event-only ENABLE|DISABLE
              Specify if output should only include system event records.

       ipmi-sel-oem-event-only ENABLE|DISABLE
              Specify if output should only include OEM event records.

       ipmi-sel-output-manufacturer-id ENABLE|DISABLE
              Specify if output of OEM event records should include manufacturer ID by default or not.

       ipmi-sel-output-event-state ENABLE|DISABLE
              Specify if ipmi-sel should output the event state state by default.

       ipmi-sel-event-state-config-file FILE
              Specify the default event state configuration file.

       ipmi-sel-interpret-oem-data ENABLE|DISABLE
              Specify if ipmi-sel should attempt to interpret OEM data by default or not.

       ipmi-sel-output-oem-event-strings ENABLE|DISABLE
              Specify if ipmi-sel should output OEM event strings by default or not.

       ipmi-sel-entity-sensor-names ENABLE|DISABLE
              Specify if output of sensor names should include entity ids and instances by default or not.

       ipmi-sel-no-sensor-type-output ENABLE|DISABLE
              Specify if output of the sensor type should be output by default or not.

       ipmi-sel-comma-separated-output ENABLE|DISABLE
              Specify if output should be comma separated by default or not.

       ipmi-sel-no-header-output ENABLE|DISABLE
              Specify if column headers should be output by default or not.

       ipmi-sel-non-abbreviated-units ENABLE|DISABLE
              Specify if output should have units abbreviated by default or not.

       ipmi-sel-legacy-output ENABLE|DISABLE
              Specify if output should be in legacy format by default or not.

IPMI-SENSORS OPTIONS

       The following options are specific to ipmi-sensors(8).  They will be ignored by other tools.

       ipmi-sensors-username USERNAME
              Specify  the default username to use for ipmi-sensors(8).  If specified, will override the general
              option username above.

       ipmi-sensors-password PASSWORD
              Specify the default password to use for ipmi-sensors(8).  If specified, will override the  general
              option password above.

       ipmi-sensors-k_g str
              Specify  the  default  BMC  key (K_g) to use for ipmi-sensors(8).  If specified, will override the
              general option k_g above. Prefix with '0x' to enter the key in hex.

       ipmi-sensors-authentication-type AUTHENTICATION-TYPE
              Specify the default authentication type to use for ipmi-sensors(8).  If specified,  will  override
              the  general  option  authentication-type above. The following authentication types are supported:
              NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

       ipmi-sensors-cipher-suite-id CIPHER-SUITE-ID
              Specify the default cipher suite id to use for ipmi-sensors(8).  If specified, will  override  the
              general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6,
              7, 8, 11, 12.

       ipmi-sensors-privilege-level PRIVILEGE-LEVEL
              Specify the default privilege type to use for ipmi-sensors(8).  If specified,  will  override  the
              general  option  privilege-level  above.  The  following  privilege  levels  are  supported: USER,
              OPERATOR, ADMIN.

       ipmi-sensors-workaround-flags WORKAROUNDS
              Specify default workaround flags to use for ipmi-sensors(8).   If  specified,  will  override  the
              general  options  workaround-flags  above.  Multiple  workarounds  can  be  specified separated by
              whitespace.  Please see ipmi-sensors(8) manpage for available workarounds.

       ipmi-sensors-verbose-count COUNT
              Specify default verbose count to use for ipmi-sensors(8).

       ipmi-sensors-quiet-readings ENABLE|DISABLE
              Specify if sensor reading values and thresholds should not be output by default.

       ipmi-sensors-record-ids ECORD-IDS-LIST
              Specify default record ids to show sensor outputs  for.  Multiple  record  ids  can  be  specified
              separated by whitespace.

       ipmi-sensors-exclude-record-ids ECORD-IDS-LIST
              Specify  default  record  ids to not show sensor outputs for. Multiple record ids can be specified
              separated by whitespace.

       ipmi-sensors-types TYPE-LIST
              Specify default types to show sensor outputs for. Multiple types can  be  specified  separated  by
              whitespace.  Users  may  specify  sensor types by string or by number (decimal or hex). Please see
              ipmi-sensors(8) --list-types option to see possible string input types.

       ipmi-sensors-exclude-types ENSOR-TYPES-LIST Specify
              default sensor types to not show sensor outputs  for.  Multiple  sensor  types  can  be  specified
              separated  by  whitespace. Users may specify sensor types by string or by number. Please see ipmi-
              sensors(8) --list-types option to see possible string input types.

       ipmi-sensors-bridge-sensors ENABLE|DISABLE
              Specify if non-BMC sensors should be bridged by default or not.

       ipmi-sensors-shared-sensors ENABLE|DISABLE
              Specify if shared sensors should be output by default or not.

       ipmi-sensors-interpret-oem-data ENABLE|DISABLE
              Specify if ipmi-sensors should attempt to interpret OEM data by default or not.

       ipmi-sensors-ignore-not-available-sensors ENABLE|DISABLE
              Specify if ipmi-sensors should ignore not-available (i.e. N/A) sensors by default.

       ipmi-sensors-ignore-unrecognized-events ENABLE|DISABLE
              Specify if ipmi-sensors should ignore unrecognized events (i.e. 'Unrecognized Event')  in  sensors
              output by default.

       ipmi-sensors-output-event-bitmask ENABLE|DISABLE
              Specify if ipmi-sensors should output event bitmasks instead of string representations by default.

       ipmi-sensors-output-sensor-state ENABLE|DISABLE
              Specify if ipmi-sensors should output the sensor state by default.

       ipmi-sensors-sensor-state-config-file FILE
              Specify the default sensor state configuration file.

       ipmi-sensors-entity-sensor-names ENABLE|DISABLE
              Specify if output of sensor names should include entity ids and instances by default or not.

       ipmi-sensors-output-sensor-thresholds ENABLE|DISABLE
              Specify if ipmi-sensors should output sensor thresholds by default.

       ipmi-sensors-no-sensor-type-output ENABLE|DISABLE
              Specify if output of the sensor type should be output by default or not.

       ipmi-sensors-comma-separated-output ENABLE|DISABLE
              Specify if output should be comma separated by default or not.

       ipmi-sensors-no-header-output ENABLE|DISABLE
              Specify if column headers should be output by default or not.

       ipmi-sensors-non-abbreviated-units ENABLE|DISABLE
              Specify if output should have units abbreviated by default or not.

       ipmi-sensors-legacy-output ENABLE|DISABLE
              Specify if output should be in legacy format by default or not.

       ipmi-sensors-ipmimonitoring-legacy-output ENABLE|DISABLE
              Specify if output should be in ipmimonitoring legacy format by default or not.

IPMICONSOLE OPTIONS

       The following options are specific to ipmiconsole(8).  They will be ignored by other tools.

       ipmiconsole-username USERNAME
              Specify  the  default username to use for ipmiconsole(8).  If specified, will override the general
              option username above.

       ipmiconsole-password PASSWORD
              Specify the default password to use for ipmiconsole(8).  If specified, will override  the  general
              option password above.

       ipmiconsole-k_g str
              Specify  the  default  BMC  key  (K_g) to use for ipmiconsole(8).  If specified, will override the
              general option k_g above. Prefix with '0x' to enter the key in hex.

       ipmiconsole-authentication-type AUTHENTICATION-TYPE
              Specify the default authentication type to use for ipmiconsole(8).  If  specified,  will  override
              the  general  option  authentication-type above. The following authentication types are supported:
              NONE, STRAIGHT_PASSWORD_KEY, MD2, and MD5.

       ipmiconsole-cipher-suite-id CIPHER-SUITE-ID
              Specify the default cipher suite id to use for ipmiconsole(8).  If specified,  will  override  the
              general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6,
              7, 8, 11, 12.

       ipmiconsole-privilege-level PRIVILEGE-LEVEL
              Specify the default privilege type to use for ipmiconsole(8).  If  specified,  will  override  the
              general  option  privilege-level  above.  The  following  privilege  levels  are  supported: USER,
              OPERATOR, ADMIN.

       ipmiconsole-workaround-flags WORKAROUNDS
              Specify default workaround flags to use for  ipmiconsole(8).   If  specified,  will  override  the
              general  options  workaround-flags  above.  Multiple  workarounds  can  be  specified separated by
              whitespace.  Please see ipmiconsole(8) manpage for available workarounds.

       ipmiconsole-escape-char CHAR
              Specify the default escape character.

       ipmiconsole-dont-steal ENABLE|DISABLE
              Specify if in use SOL sessions should not be stolen by default.

       ipmiconsole-serial-keepalive ENABLE|DISABLE
              Specify if serial keepalive should be enabled by default.

       ipmiconsole-serial-keepalive-empty ENABLE|DISABLE
              Specify if serial keepalive empty should be enabled by default.

       ipmiconsole-sol-payload-instance NUM
              Specify the default SOL payload instance.

       ipmiconsole-deactivate-all-instances ENABLE|DISABLE
              Specify if SOL deactivate should deactivate all instances by default.

       ipmiconsole-lock-memory ENABLE|DISABLE
              Specify if memory should be locked by default.

IPMIPOWER OPTIONS

       The following options are specific to ipmipower(8).  They will be ignored by other tools.

       ipmipower-username USERNAME
              Specify the default username to use for ipmipower(8).  If specified,  will  override  the  general
              option username above.

       ipmipower-password PASSWORD
              Specify  the  default  password  to use for ipmipower(8).  If specified, will override the general
              option password above.

       ipmipower-k_g str
              Specify the default BMC key (K_g) to use  for  ipmipower(8).   If  specified,  will  override  the
              general option k_g above. Prefix with '0x' to enter the key in hex.

       ipmipower-authentication-type AUTHENTICATION-TYPE
              Specify  the default authentication type to use for ipmipower(8).  If specified, will override the
              general option authentication-type above. The following authentication types are supported:  NONE,
              STRAIGHT_PASSWORD_KEY, MD2, and MD5.

       ipmipower-cipher-suite-id CIPHER-SUITE-ID
              Specify  the  default  cipher  suite  id to use for ipmipower(8).  If specified, will override the
              general option cipher-suite-id above. The following cipher suite ids are supported: 0, 1, 2, 3, 6,
              7, 8, 11, 12.

       ipmipower-privilege-level PRIVILEGE-LEVEL
              Specify  the  default  privilege  type  to  use for ipmipower(8).  If specified, will override the
              general option  privilege-level  above.  The  following  privilege  levels  are  supported:  USER,
              OPERATOR, ADMIN.

       ipmipower-workaround-flags WORKAROUNDS
              Specify default workaround flags to use for ipmipower(8).  If specified, will override the general
              options workaround-flags above. Multiple workarounds can be  specified  separated  by  whitespace.
              Please see ipmipower(8) manpage for available workarounds.

       ipmipower-on-if-off ENABLE|DISABLE
              Specify if on-if-off functionality is enabled or disabled by default.

       ipmipower-wait-until-on ENABLE|DISABLE
              Specify if wait-until-on functionality is enabled or disabled by default.

       ipmipower-wait-until-off ENABLE|DISABLE
              Specify if wait-until-off functionality is enabled or disabled by default.

       ipmipower-oem-power-type OEM-POWER-TYPE
              Specify OEM power type to be used.

       ipmipower-retransmission-wait-timeout MILLISECONDS
              Specify the default retransmission wait timeout length to use in milliseconds.

       ipmipower-retransmission-backoff-count COUNT
              Specify the default retransmission backoff count to use for retransmissions.

       ipmipower-ping-interval MILLISECONDS
              Specify the default ping interval length to use in milliseconds.

       ipmipower-ping-timeout MILLISECONDS
              Specify the default ping timeout length to use in milliseconds.

       ipmipower-ping-packet-count COUNT
              Specify the default ping packet count size to use.

       ipmipower-ping-percent PERCENT
              Specify the default ping percent value to use.

       ipmipower-ping-consec-count COUNT
              Specify the default ping consecutive count value to use.

FILES

       /etc/freeipmi//freeipmi.conf

REPORTING BUGS

       Report bugs to <freeipmi-users@gnu.org> or <freeipmi-devel@gnu.org>.

       Copyright © 2003-2014 FreeIPMI Core Team.

       FreeIPMI  is  free  software; you can redistribute it and/or modify it under the terms of the GNU General
       Public License as published by the Free Software Foundation; either version 3 of the License, or (at your
       option) any later version.

SEE ALSO

       freeipmi(7),  bmc-device(8),  bmc-info(8), bmc-watchdog(8), ipmi-chassis(8), ipmi-config(8), ipmi-fru(8),
       ipmi-oem(8), ipmi-raw(8), ipmi-sel(8), ipmi-sensors(8), ipmiconsole(8), ipmipower(8)

       http://www.gnu.org/software/freeipmi/