bionic (5) libipmimonitoring.conf.5.gz

Provided by: freeipmi-common_1.4.11-1.1ubuntu4.1_amd64 bug

NAME

       freeipmi_interpret_sensor.conf - specify sensor interpretation rules

DESCRIPTION

       The  /etc/freeipmi//freeipmi_interpret_sensor.conf  defines  how IPMI sensors should be interpreted. IPMI
       based sensors specify a number of states/thresholds when they are read. Based on those states/thresholds,
       libraries  and  tools  such  as  libfreeipmi(3), libipmimonitoring(3) and ipmi-sensors(8) can report if a
       sensor reading is "good" or "bad" via a report of a NOMINAL, WARNING, or CRITICAL state.

       Each of the states listed below are (hopefully) descriptive enough to describe the state conditions  that
       may  be  set/unset  for  each sensor type. For more detailed information on each of the individual states
       listed below, please see the IPMI Specification "Sensor and Event Code Tables".  Ipmi-sensors(8)  can  be
       used  to  determine  the sensor types and the states/thresholds that exist on a system by outputting very
       verbose output and seeing what types of Assertion or Deassertion events are possible.

       The possible values for all states/thresholds below are:

       Nominal - Signal Nominal reading if state/threshold tripped

       Warning - Signal Warning reading if state/treshold tripped

       Critical - Signal Critical reading if state/threshold tripped

       Not all IPMI sensor types and event types  are  currently  supported.  If  you  would  like  more  to  be
       supported, please e-mail the FreeIPMI mailing list.

       The  default values selected for individual states/thresholds being tripped are based on best guesses and
       motherboards being analyzed.  If you think they should be changed, please  e-mail  the  FreeIPMI  mailing
       list to discuss what the defaults should be.

       Most  default  interpretations  can  be determined quite easily and can meet the needs of most users. For
       example, a reading of "Performance_Met"  is  normally  better  than  "Performance_Lags".   However,  some
       sensors  can  be  ambiguous  and depend completely on the manufacturer. For example, "State_Asserted" vs.
       "State_Deasserted" are completely at the interpretation of the vendor. Users are advised  to  adjust  the
       interpretations below as needed for their machines.

       Every  group  of  state  conditions  below includes a configuration for "No_Event". This is the condition
       under which no sensor states/events have occurred or are triggered. Under most conditions, a  mapping  to
       "Nominal" is preferred. However, under some circumstances, it may be useful to report something else. For
       example, if a sensor on a particular motherboard is required to report a state/event, a no  sensor  state
       condition could indicate a broken a sensor. This is highly dependent on the motherboard.

FORMAT

       The  configuration  options  that  can  be  specified  in  the  configuration file are listed below. Each
       configuration option must be listed on a separate line. Arguments for an  option  are  separated  by  any
       amount  of  whitespace.  Multiple  arguments are also separated by whitespace.  Comments can be marked by
       using the pound sign ("#") character, and lines can be continued on the next using backslash ("\").

OPTIONS

       IPMI_Threshold_Sensor
              The following states correspond to threshold  sensors.  This  normally  applies  to  sensors  that
              measure non-discrete values, such as temperatures, voltages, RPM, etc.

              IPMI_Threshold_Sensor_No_Event
                     Defaults to Nominal.

              IPMI_Threshold_Sensor_At_Or_Below_Lower_Non_Critical_Threshold
                     Defaults to Nominal.

              IPMI_Threshold_Sensor_At_Or_Below_Lower_Critical_Threshold
                     Defaults to Critical.

              IPMI_Threshold_Sensor_At_Or_Below_Lower_Non_Recoverable_Threshold
                     Defaults to Critical.

              IPMI_Threshold_Sensor_At_Or_Above_Upper_Non_Critical_Threshold
                     Defaults to Nominal.

              IPMI_Threshold_Sensor_At_Or_Above_Upper_Critical_Threshold
                     Defaults to Critical.

              IPMI_Threshold_Sensor_At_Or_Above_Upper_Non_Recoverable_Threshold
                     Defaults to Critical.

       IPMI_Temperature_State
              The following states correspond to Temperature sensors that report an assertion or deassertion.

              IPMI_Temperature_State_No_Event
                     Defaults to Nominal.

              IPMI_Temperature_State_Deasserted
                     Defaults to Nominal.

              IPMI_Temperature_State_Asserted
                     Defaults to Warning.

       IPMI_Temperature_Limit
              The following states correspond to Temperature sensors that report on limits.

              IPMI_Temperature_Limit_No_Event
                     Defaults to Nominal.

              IPMI_Temperature_Limit_Not_Exceeded
                     Defaults to Nominal.

              IPMI_Temperature_Limit_Exceeded
                     Defaults to Critical.

       IPMI_Temperature_Transition_Severity
              The following states correspond to Temperature sensors that report on device severity.

              IPMI_Temperature_Transition_Severity_No_Event
                     Defaults to Nominal.

              IPMI_Temperature_Transition_Severity_Transition_To_OK
                     Defaults to Nominal.

              IPMI_Temperature_Transition_Severity_Transition_To_Non_Critical_From_OK
                     Defaults to Warning.

              IPMI_Temperature_Transition_Severity_Transition_To_Critical_From_Less_Severe
                     Defaults to Critical.

              IPMI_Temperature_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
                     Defaults to Critical.

              IPMI_Temperature_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
                     Defaults to Warning.

              IPMI_Temperature_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
                     Defaults to Critical.

              IPMI_Temperature_Transition_Severity_Transition_To_Non_Recoverable
                     Defaults to Critical.

              IPMI_Temperature_Transition_Severity_Monitor
                     Defaults to Warning.

              IPMI_Temperature_Transition_Severity_Informational
                     Defaults to Nominal.

       IPMI_Voltage_State
              The following states correspond to Voltage sensors that report an assertion or deassertion.

              IPMI_Voltage_State_No_Event
                     Defaults to Nominal.

              IPMI_Voltage_State_Deasserted
                     Defaults to Nominal.

              IPMI_Voltage_State_Asserted
                     Defaults to Warning.

       IPMI_Voltage_Limit
              The following states correspond to Voltage sensors that report on limits.

              IPMI_Voltage_Limit_No_Event
                     Defaults to Nominal.

              IPMI_Voltage_Limit_Not_Exceeded
                     Defaults to Nominal.

              IPMI_Voltage_Limit_Exceeded
                     Defaults to Critical.

       IPMI_Voltage_Performance
              The following states correspond to Voltage sensors that report on performance.

              IPMI_Voltage_Performance_No_Event
                     Defaults to Nominal.

              IPMI_Voltage_Performance_Met
                     Defaults to Nominal.

              IPMI_Voltage_Performance_Lags
                     Defaults to Critical.

       IPMI_Voltage_Transition_Severity
              The following states correspond to Voltage sensors that report on device severity.

              IPMI_Voltage_Transition_Severity_No_Event
                     Defaults to Nominal.

              IPMI_Voltage_Transition_Severity_Transition_To_OK
                     Defaults to Nominal.

              IPMI_Voltage_Transition_Severity_Transition_To_Non_Critical_From_OK
                     Defaults to Warning.

              IPMI_Voltage_Transition_Severity_Transition_To_Critical_From_Less_Severe
                     Defaults to Critical.

              IPMI_Voltage_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
                     Defaults to Critical.

              IPMI_Voltage_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
                     Defaults to Warning.

              IPMI_Voltage_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
                     Defaults to Critical.

              IPMI_Voltage_Transition_Severity_Transition_To_Non_Recoverable
                     Defaults to Critical.

              IPMI_Voltage_Transition_Severity_Monitor
                     Defaults to Warning.

              IPMI_Voltage_Transition_Severity_Informational
                     Defaults to Nominal.

       IPMI_Current_Transition_Severity
              The following states correspond to Current sensors that report on device severity.

              IPMI_Current_Transition_Severity_No_Event
                     Defaults to Nominal.

              IPMI_Current_Transition_Severity_Transition_To_OK
                     Defaults to Nominal.

              IPMI_Current_Transition_Severity_Transition_To_Non_Critical_From_OK
                     Defaults to Warning.

              IPMI_Current_Transition_Severity_Transition_To_Critical_From_Less_Severe
                     Defaults to Critical.

              IPMI_Current_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
                     Defaults to Critical.

              IPMI_Current_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
                     Defaults to Warning.

              IPMI_Current_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
                     Defaults to Critical.

              IPMI_Current_Transition_Severity_Transition_To_Non_Recoverable
                     Defaults to Critical.

              IPMI_Current_Transition_Severity_Monitor
                     Defaults to Warning.

              IPMI_Current_Transition_Severity_Informational
                     Defaults to Nominal.

       IPMI_Fan_State
              The following states correspond to Fan sensors that report an assertion or deassertion.

              IPMI_Fan_State_No_Event
                     Defaults to Nominal.

              IPMI_Fan_State_Deasserted
                     Defaults to Nominal.

              IPMI_Fan_State_Asserted
                     Defaults to Warning.

       IPMI_Fan_Transition_Severity
              The following states correspond to Fan sensors that report on device severity.

              IPMI_Fan_Transition_Severity_No_Event
                     Defaults to Nominal.

              IPMI_Fan_Transition_Severity_Transition_To_OK
                     Defaults to Nominal.

              IPMI_Fan_Transition_Severity_Transition_To_Non_Critical_From_OK
                     Defaults to Warning.

              IPMI_Fan_Transition_Severity_Transition_To_Critical_From_Less_Severe
                     Defaults to Critical.

              IPMI_Fan_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
                     Defaults to Critical.

              IPMI_Fan_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
                     Defaults to Warning.

              IPMI_Fan_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
                     Defaults to Critical.

              IPMI_Fan_Transition_Severity_Transition_To_Non_Recoverable
                     Defaults to Critical.

              IPMI_Fan_Transition_Severity_Monitor
                     Defaults to Warning.

              IPMI_Fan_Transition_Severity_Informational
                     Defaults to Nominal.

       IPMI_Fan_Device_Present
              The following states correspond to Fan sensors that report on device installation.

              IPMI_Fan_Device_Present_Device_No_Event
                     Defaults to Nominal.

              IPMI_Fan_Device_Present_Device_Removed_Device_Absent
                     Defaults to Critical.

              IPMI_Fan_Device_Present_Device_Inserted_Device_Present
                     Defaults to Nominal.

       IPMI_Power_Supply_Transition_Severity
              The following states correspond to Power Supply sensors that report on device severity.

              IPMI_Power_Supply_Transition_Severity_No_Event
                     Defaults to Nominal.

              IPMI_Power_Supply_Transition_Severity_Transition_To_OK
                     Defaults to Nominal.

              IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Critical_From_OK
                     Defaults to Warning.

              IPMI_Power_Supply_Transition_Severity_Transition_To_Critical_From_Less_Severe
                     Defaults to Critical.

              IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
                     Defaults to Critical.

              IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
                     Defaults to Warning.

              IPMI_Power_Supply_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
                     Defaults to Critical.

              IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Recoverable
                     Defaults to Critical.

              IPMI_Power_Supply_Transition_Severity_Monitor
                     Defaults to Warning.

              IPMI_Power_Supply_Transition_Severity_Informational
                     Defaults to Nominal.

       IPMI_Fan_Transition_Availability
              The following states correspond to Fan sensors that report on device availability.

              IPMI_Fan_Transition_Availability_No_Event
                     Defaults to Nominal.

              IPMI_Fan_Transition_Availability_To_Running
                     Defaults to Nominal.

              IPMI_Fan_Transition_Availability_To_In_Test
                     Defaults to Warning.

              IPMI_Fan_Transition_Availability_To_Power_Off
                     Defaults to Warning.

              IPMI_Fan_Transition_Availability_To_On_Line
                     Defaults to Warning.

              IPMI_Fan_Transition_Availability_To_Off_Line
                     Defaults to Warning.

              IPMI_Fan_Transition_Availability_To_Off_Duty
                     Defaults to Warning.

              IPMI_Fan_Transition_Availability_To_Degraded
                     Defaults to Critical.

              IPMI_Fan_Transition_Availability_To_Power_Save
                     Defaults to Warning.

              IPMI_Fan_Transition_Availability_Install_Error
                     Defaults to Critical.

       IPMI_Fan_Redundancy
              The following states correspond to Fan sensors that report on redundancy.

              IPMI_Fan_Redundancy_No_Event
                     Defaults to Nominal.

              IPMI_Fan_Redundancy_Fully_Redundant
                     Defaults to Nominal.

              IPMI_Fan_Redundancy_Redundancy_Lost
                     Defaults to Critical.

              IPMI_Fan_Redundancy_Redundancy_Degraded
                     Defaults to Warning.

              IPMI_Fan_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant
                     Defaults to Critical.

              IPMI_Fan_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy
                     Defaults to Critical.

              IPMI_Fan_Redundancy_Non_Redundant_Insufficient_Resources
                     Defaults to Critical.

              IPMI_Fan_Redundancy_Redundancy_Degraded_From_Fully_Redundant
                     Defaults to Warning.

              IPMI_Fan_Redundancy_Redundancy_Degraded_From_Non_Redundant
                     Defaults to Warning.

       IPMI_Physical_Security
              The  following states correspond to Physical Security sensors w/ Physical Security specific output
              states.

              IPMI_Physical_Security_No_Event
                     Defaults to Nominal.

              IPMI_Physical_Security_General_Chassis_Intrusion
                     Defaults to Critical.

              IPMI_Physical_Security_Drive_Bay_Intrusion
                     Defaults to Critical.

              IPMI_Physical_Security_IO_Card_Intrusion
                     Defaults to Critical.

              IPMI_Physical_Security_Processor_Area_Intrusion
                     Defaults to Critical.

              IPMI_Physical_Security_LAN_Leash_Lost
                     Defaults to Critical.

              IPMI_Physical_Security_Unauthorized_Dock_Undock
                     Defaults to Critical.

              IPMI_Physical_Security_FAN_Area_Intrusion
                     Defaults to Critical.

       IPMI_Platform_Security_Violation_Attempt
              The following states correspond  to  Platform  Violation  Attempt  sensors  w/  Platform  Security
              Violation Attempt specific output states.

              IPMI_Platform_Security_Violation_Attempt_No_Event
                     Defaults to Nominal.

              IPMI_Platform_Security_Violation_Attempt_Secure_Mode_Violation_Attempt
                     Defaults to Critical.

              IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Violation_User_Password
                     Defaults to Critical.

              IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Violation_Attempt_Setup_Password
                     Defaults to Critical.

              IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Violation_Network_Boot_Password
                     Defaults to Critical.

              IPMI_Platform_Security_Violation_Attempt_Other_Pre_Boot_Password_Violation
                     Defaults to Critical.

              IPMI_Platform_Security_Violation_Attempt_Out_Of_Band_Access_Password_Violation
                     Defaults to Critical.

       IPMI_Processor
              The following states correspond to Processor sensors w/ Processor specific output states.

              IPMI_Processor_No_Event
                     Defaults to Nominal.

              IPMI_Processor_IERR
                     Defaults to Critical.

              IPMI_Processor_Thermal_Trip
                     Defaults to Critical.

              IPMI_Processor_FRB1_BIST_Failure
                     Defaults to Critical.

              IPMI_Processor_FRB2_Hang_In_POST_Failure
                     Defaults to Critical.

              IPMI_Processor_FRB3_Processor_Startup_Initialization_Failure
                     Defaults to Critical.

              IPMI_Processor_Configuration_Error
                     Defaults to Critical.

              IPMI_Processor_SMBIOS_Uncorrectable_CPU_Complex_Error
                     Defaults to Critical.

              IPMI_Processor_Processor_Presence_Detected
                     Defaults to Nominal.

              IPMI_Processor_Processor_Disabled
                     Defaults to Critical.

              IPMI_Processor_Terminator_Presence_Detected
                     Defaults to Critical.

              IPMI_Processor_Processor_Automatically_Throttled
                     Defaults to Warning.

              IPMI_Processor_Machine_Check_Exception
                     Defaults to Critical.

              IPMI_Processor_Correctable_Machine_Check_Error
                     Defaults to Warning.

       IPMI_Processor_State
              The following states correspond to Processor sensors that report an assertion or deassertion.

              IPMI_Processor_State_No_Event
                     Defaults to Nominal.

              IPMI_Processor_State_Deasserted
                     Defaults to Nominal.

              IPMI_Processor_State_Asserted
                     Defaults to Critical.

       IPMI_Power_Supply
              The following states correspond to Power Supply sensors w/ Power Supply specific output states.

              IPMI_Power_Supply_No_Event
                     Defaults to Nominal.

              IPMI_Power_Supply_Presence_Detected
                     Defaults to Nominal.

              IPMI_Power_Supply_Power_Supply_Failure_Detected
                     Defaults to Critical.

              IPMI_Power_Supply_Predictive_Failure
                     Defaults to Critical.

              IPMI_Power_Supply_Power_Supply_Input_Lost_AC_DC
                     Defaults to Critical.

              IPMI_Power_Supply_Power_Supply_Input_Lost_Or_Out_Of_Range
                     Defaults to Critical.

              IPMI_Power_Supply_Power_Supply_Input_Out_Of_Range_But_Present
                     Defaults to Critical.

              IPMI_Power_Supply_Configuration_Error
                     Defaults to Critical.

              IPMI_Power_Supply_Power_Supply_Inactive
                     Defaults to Warning.

       IPMI_Power_Supply_State
              The following states correspond to Power_Supply sensors that report an assertion or deassertion.

              IPMI_Power_Supply_State_No_Event
                     Defaults to Nominal.

              IPMI_Power_Supply_State_Deasserted
                     Defaults to Critical.

              IPMI_Power_Supply_State_Asserted
                     Defaults to Nominal.

       IPMI_Power_Supply_Redundancy
              The following states correspond to Power Supply sensors that report on redundancy.

              IPMI_Power_Supply_Redundancy_No_Event
                     Defaults to Nominal.

              IPMI_Power_Supply_Redundancy_Fully_Redundant
                     Defaults to Nominal.

              IPMI_Power_Supply_Redundancy_Redundancy_Lost
                     Defaults to Critical.

              IPMI_Power_Supply_Redundancy_Redundancy_Degraded
                     Defaults to Warning.

              IPMI_Power_Supply_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant
                     Defaults to Critical.

              IPMI_Power_Supply_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy
                     Defaults to Critical.

              IPMI_Power_Supply_Redundancy_Non_Redundant_Insufficient_Resources
                     Defaults to Critical.

              IPMI_Power_Supply_Redundancy_Redundancy_Degraded_From_Fully_Redundant
                     Defaults to Warning.

              IPMI_Power_Supply_Redundancy_Redundancy_Degraded_From_Non_Redundant
                     Defaults to Warning.

       IPMI_Power_Unit
              The following states correspond to Power Unit sensors w/ Power Unit specific output states.

              IPMI_Power_Unit_No_Event
                     Defaults to Nominal.

              IPMI_Power_Unit_Power_Off_Power_Down
                     Defaults to Nominal.

              IPMI_Power_Unit_Power_Cycle
                     Defaults to Nominal.

              IPMI_Power_Unit_240VA_Power_Down
                     Defaults to Warning.

              IPMI_Power_Unit_Interlock_Power_Down
                     Defaults to Warning.

              IPMI_Power_Unit_AC_Lost
                     Defaults to Critical.

              IPMI_Power_Unit_Soft_Power_Control_Failure
                     Defaults to Critical.

              IPMI_Power_Unit_Power_Unit_Failure_Detected
                     Defaults to Critical.

              IPMI_Power_Unit_Predictive_Failure
                     Defaults to Critical.

       IPMI_Power_Unit_Device_Present
              The following states correspond to Power Unit sensors that report on device installation.

              IPMI_Power_Unit_Device_Present_No_Event
                     Defaults to Nominal.

              IPMI_Power_Unit_Device_Present_Device_Removed_Device_Absent
                     Defaults to Critical.

              IPMI_Power_Unit_Device_Present_Device_Inserted_Device_Present
                     Defaults to Nominal.

       IPMI_Power_Unit_Redundancy
              The following states correspond to Power Unit sensors that report on redundancy.

              IPMI_Power_Unit_Redundancy_No_Event
                     Defaults to Nominal.

              IPMI_Power_Unit_Redundancy_Fully_Redundant
                     Defaults to Nominal.

              IPMI_Power_Unit_Redundancy_Redundancy_Lost
                     Defaults to Critical.

              IPMI_Power_Unit_Redundancy_Redundancy_Degraded
                     Defaults to Warning.

              IPMI_Power_Unit_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant
                     Defaults to Critical.

              IPMI_Power_Unit_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy
                     Defaults to Critical.

              IPMI_Power_Unit_Redundancy_Non_Redundant_Insufficient_Resources
                     Defaults to Critical.

              IPMI_Power_Unit_Redundancy_Redundancy_Degraded_From_Fully_Redundant
                     Defaults to Warning.

              IPMI_Power_Unit_Redundancy_Redundancy_Degraded_From_Non_Redundant
                     Defaults to Warning.

       IPMI_Cooling_Device_Redundancy
              The following states correspond to Cooling Device sensors that report on redundancy.

              IPMI_Cooling_Device_Redundancy_No_Event
                     Defaults to Nominal.

              IPMI_Cooling_Device_Redundancy_Fully_Redundant
                     Defaults to Nominal.

              IPMI_Cooling_Device_Redundancy_Redundancy_Lost
                     Defaults to Critical.

              IPMI_Cooling_Device_Redundancy_Redundancy_Degraded
                     Defaults to Warning.

              IPMI_Cooling_Device_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant
                     Defaults to Critical.

              IPMI_Cooling_Device_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy
                     Defaults to Critical.

              IPMI_Cooling_Device_Redundancy_Non_Redundant_Insufficient_Resources
                     Defaults to Critical.

              IPMI_Cooling_Device_Redundancy_Redundancy_Degraded_From_Fully_Redundant
                     Defaults to Warning.

              IPMI_Cooling_Device_Redundancy_Redundancy_Degraded_From_Non_Redundant
                     Defaults to Warning.

       IPMI_Memory
              The following states correspond to Memory sensors w/ Memory specific output states.

              IPMI_Memory_No_Event
                     Defaults to Nominal.

              IPMI_Memory_Correctable_Memory_Error
                     Defaults to Warning.

              IPMI_Memory_Uncorrectable_Memory_Error
                     Defaults to Critical.

              IPMI_Memory_Parity
                     Defaults to Critical.

              IPMI_Memory_Memory_Scrub_Failed
                     Defaults to Critical.

              IPMI_Memory_Memory_Device_Disabled
                     Defaults to Critical.

              IPMI_Memory_Correctable_Memory_Error_Logging_Limit_Reached
                     Defaults to Warning.

              IPMI_Memory_Presence_Detected
                     Defaults to Nominal.

              IPMI_Memory_Configuration_Error
                     Defaults to Critical.

              IPMI_Memory_Spare
                     Defaults to Nominal.

              IPMI_Memory_Memory_Automatically_Throttled
                     Defaults to Warning.

              IPMI_Memory_Critical_Overtemperature
                     Defaults to Critical.

       IPMI_Memory_State
              The following states correspond to Memory sensors that report an assertion or deassertion.

              IPMI_Memory_State_No_Event
                     Defaults to Nominal.

              IPMI_Memory_State_Deasserted
                     Defaults to Nominal.

              IPMI_Memory_State_Asserted
                     Defaults to Critical.

       IPMI_Memory_Transition_Severity
              The following states correspond to Memory sensors that report on device severity.

              IPMI_Memory_Transition_Severity_No_Event
                     Defaults to Nominal.

              IPMI_Memory_Transition_Severity_Transition_To_OK
                     Defaults to Nominal.

              IPMI_Memory_Transition_Severity_Transition_To_Non_Critical_From_OK
                     Defaults to Warning.

              IPMI_Memory_Transition_Severity_Transition_To_Critical_From_Less_Severe
                     Defaults to Critical.

              IPMI_Memory_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
                     Defaults to Critical.

              IPMI_Memory_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
                     Defaults to Warning.

              IPMI_Memory_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
                     Defaults to Critical.

              IPMI_Memory_Transition_Severity_Transition_To_Non_Recoverable
                     Defaults to Critical.

              IPMI_Memory_Transition_Severity_Monitor
                     Defaults to Warning.

              IPMI_Memory_Transition_Severity_Informational
                     Defaults to Nominal.

       IPMI_Memory_Redundancy
              The following states correspond to Cooling Device sensors that report on redundancy.

              IPMI_Memory_Redundancy_No_Event
                     Defaults to Nominal.

              IPMI_Memory_Redundancy_Fully_Redundant
                     Defaults to Nominal.

              IPMI_Memory_Redundancy_Redundancy_Lost
                     Defaults to Critical.

              IPMI_Memory_Redundancy_Redundancy_Degraded
                     Defaults to Warning.

              IPMI_Memory_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant
                     Defaults to Critical.

              IPMI_Memory_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy
                     Defaults to Critical.

              IPMI_Memory_Redundancy_Non_Redundant_Insufficient_Resources
                     Defaults to Critical.

              IPMI_Memory_Redundancy_Redundancy_Degraded_From_Fully_Redundant
                     Defaults to Warning.

              IPMI_Memory_Redundancy_Redundancy_Degraded_From_Non_Redundant
                     Defaults to Warning.

       IPMI_Drive_Slot
              The following states correspond to Drive Slot sensors w/ Drive Slot specific output states.

              IPMI_Drive_Slot_No_Event
                     Defaults to Nominal.

              IPMI_Drive_Slot_Drive_Presence
                     Defaults to Nominal.

              IPMI_Drive_Slot_Drive_Fault
                     Defaults to Critical.

              IPMI_Drive_Slot_Predictive_Failure
                     Defaults to Critical.

              IPMI_Drive_Slot_Hot_Spare
                     Defaults to Nominal.

              IPMI_Drive_Slot_Consistency_Check_Parity_Check_In_Progress
                     Defaults to Nominal.

              IPMI_Drive_Slot_In_Critical_Array
                     Defaults to Critical.

              IPMI_Drive_Slot_In_Failed_Array
                     Defaults to Critical.

              IPMI_Drive_Slot_Rebuild_Remap_In_Progress
                     Defaults to Nominal.

              IPMI_Drive_Slot_Rebuild_Remap_Aborted
                     Defaults to Critical.

       IPMI_Drive_Slot_State
              The following states correspond to Drive Slot sensors that report an assertion or deassertion.

              IPMI_Drive_Slot_State_No_Event
                     Defaults to Nominal.

              IPMI_Drive_Slot_State_Deasserted
                     Defaults to Warning.

              IPMI_Drive_Slot_State_Asserted
                     Defaults to Nominal.

       IPMI_Drive_Slot_Predictive_Failure
              The  following  states correspond to Drive_Slot sensors that report a predictive failure assertion
              or deassertion.

              IPMI_Drive_Slot_Predictive_Failure_No_Event
                     Defaults to Nominal.

              IPMI_Drive_Slot_Predictive_Failure_Deasserted
                     Defaults to Nominal.

              IPMI_Drive_Slot_Predictive_Failure_Asserted
                     Defaults to Critical.

       IPMI_Drive_Slot_Device_Present
              The following states correspond to Drive Slot sensors that report on device installation.

              IPMI_Drive_Slot_Device_Present_No_Event
                     Defaults to Nominal.

              IPMI_Drive_Slot_Device_Present_Device_Removed_Device_Absent
                     Defaults to Critical.

              IPMI_Drive_Slot_Device_Present_Device_Inserted_Device_Present
                     Defaults to Nominal.

       IPMI_POST_Memory_Resize_State
              The following states correspond to  POST  Memory  Resize  sensors  that  report  an  assertion  or
              deassertion.

              IPMI_POST_Memory_Resize_State_No_Event
                     Defaults to Nominal.

              IPMI_POST_Memory_Resize_State_Deasserted
                     Defaults to Nominal.

              IPMI_POST_Memory_Resize_State_Asserted
                     Defaults to Warning.

       IPMI_System_Firmware_Progress
              The  following  states  correspond to System Firmware Progress sensors w/ System Firmware Progress
              specific output states.

              IPMI_System_Firmware_Progress_No_Event
                     Defaults to Nominal.

              IPMI_System_Firmware_Progress_System_Firmware_Error
                     Defaults to Critical.

              IPMI_System_Firmware_Progress_System_Firmware_Hang
                     Defaults to Critical.

              IPMI_System_Firmware_Progress_System_Firmware_Progress
                     Defaults to Nominal.

       IPMI_System_Firmware_Progress_Transition_Severity
              The following states correspond  to  System  Firmware  Progress  sensors  that  report  on  device
              severity.

              IPMI_System_Firmware_Progress_Transition_Severity_No_Event
                     Defaults to Nominal.

              IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_OK
                     Defaults to Nominal.

              IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Non_Critical_From_OK
                     Defaults to Warning.

              IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Critical_From_Less_Severe
                     Defaults to Critical.

              IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
                     Defaults to Critical.

              IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
                     Defaults to Warning.

              IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
                     Defaults to Critical.

              IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Non_Recoverable
                     Defaults to Critical.

              IPMI_System_Firmware_Progress_Transition_Severity_Monitor
                     Defaults to Warning.

              IPMI_System_Firmware_Progress_Transition_Severity_Informational
                     Defaults to Nominal.

       IPMI_Event_Logging_Disabled
              The following states correspond to Event Logging Disabled sensors w/

              IPMI_Event_Logging_Disabled_No_Event
                     Defaults to Nominal.

              IPMI_Event_Logging_Disabled_Correctable_Memory_Error_Logging_Disabled
                     Defaults to Critical.

              IPMI_Event_Logging_Disabled_Event_Type_Logging_Disabled
                     Defaults to Critical.

              IPMI_Event_Logging_Disabled_Log_Area_Reset_Cleared
                     Defaults to Nominal.

              IPMI_Event_Logging_Disabled_All_Event_Logging_Disabled
                     Defaults to Critical.

              IPMI_Event_Logging_Disabled_SEL_Full
                     Defaults to Critical.

              IPMI_Event_Logging_Disabled_SEL_Almost_Full
                     Defaults to Warning.

              IPMI_Event_Logging_Disabled_Correctable_Machine_Check_Error_Logging_Disabled
                     Defaults to Critical.

       IPMI_System_Event
              The following states correspond to System Event sensors w/ System Event specific output states.

              IPMI_System_Event_No_Event
                     Defaults to Nominal.

              IPMI_System_Event_System_Reconfigured
                     Defaults to Warning.

              IPMI_System_Event_OEM_System_Boot_Event
                     Defaults to Nominal.

              IPMI_System_Event_Undetermined_System_Hardware_Failure
                     Defaults to Critical.

              IPMI_System_Event_Entry_Added_To_Auxiliary_Log
                     Defaults to Nominal.

              IPMI_System_Event_PEF_Action
                     Defaults to Nominal.

              IPMI_System_Event_Timestamp_Clock_Sync
                     Defaults to Warning.

       IPMI_System_Event_Transition_State
              The following states correspond to System Event sensors that report a transition state.

              IPMI_System_Event_Transition_State_No_Event
                     Defaults to Nominal.

              IPMI_System_Event_Transition_State_Active
                     Defaults to Nominal.

              IPMI_System_Event_Transition_State_Idle
                     Defaults to Nominal.

              IPMI_System_Event_Transition_State_Busy
                     Defaults to Nominal.

       IPMI_System_Event_State
              The following states correspond to System Event sensors that report an assertion or deassertion.

              IPMI_System_Event_State_No_Event
                     Defaults to Nominal.

              IPMI_System_Event_State_Deasserted
                     Defaults to Nominal.

              IPMI_System_Event_State_Asserted
                     Defaults to Warning.

       IPMI_Critical_Interrupt
              The  following  states  correspond  to  Critical  Interrupt sensors w/ Critical Interrupt specific
              output states.

              IPMI_Critical_Interrupt_No_Event
                     Defaults to Nominal.

              IPMI_Critical_Interrupt_Front_Panel_NMI_Diagnostic_Interrupt
                     Defaults to Critical.

              IPMI_Critical_Interrupt_Bus_Timeout
                     Defaults to Critical.

              IPMI_Critical_Interrupt_IO_Channel_Check_NMI
                     Defaults to Critical.

              IPMI_Critical_Interrupt_Software_NMI
                     Defaults to Warning.

              IPMI_Critical_Interrupt_PCI_PERR
                     Defaults to Critical.

              IPMI_Critical_Interrupt_PCI_SERR
                     Defaults to Critical.

              IPMI_Critical_Interrupt_EISA_Fail_Safe_Timeout
                     Defaults to Critical.

              IPMI_Critical_Interrupt_Bus_Correctable_Error
                     Defaults to Warning.

              IPMI_Critical_Interrupt_Bus_Uncorrectable_Error
                     Defaults to Critical.

              IPMI_Critical_Interrupt_Fatal_NMI
                     Defaults to Critical.

              IPMI_Critical_Interrupt_Bus_Fatal_Error
                     Defaults to Critical.  IPMI_Critical_Interrupt_Bus_Degraded Defaults to Warning.

       IPMI_Button_Switch
              The following states correspond to Button/Switch sensors w/ Button/Switch specific output states.

              IPMI_Button_Switch_No_Event
                     Defaults to Nominal.

              IPMI_Button_Switch_Power_Button_Pressed
                     Defaults to Nominal.

              IPMI_Button_Switch_Sleep_Button_Pressed
                     Defaults to Nominal.

              IPMI_Button_Switch_Reset_Button_Pressed
                     Defaults to Nominal.

              IPMI_Button_Switch_FRU_Latch_Open
                     Defaults to Warning.

              IPMI_Button_Switch_FRU_Service_Request_Button
                     Defaults to Warning.

       IPMI_Button_Switch_State
              The following states correspond to Button/Switch sensors that report an assertion or deassertion.

              IPMI_Button_Switch_State_No_Event
                     Defaults to Nominal.

              IPMI_Button_Switch_State_Deasserted
                     Defaults to Nominal.

              IPMI_Button_Switch_State_Asserted
                     Defaults to Nominal.

       IPMI_Button_Switch_Transition_Severity
              The following states correspond to Button/Switch sensors that report on device severity.

              IPMI_Button_Switch_Transition_Severity_No_Event
                     Defaults to Nominal.

              IPMI_Button_Switch_Transition_Severity_Transition_To_OK
                     Defaults to Nominal.

              IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Critical_From_OK
                     Defaults to Warning.

              IPMI_Button_Switch_Transition_Severity_Transition_To_Critical_From_Less_Severe
                     Defaults to Critical.

              IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
                     Defaults to Critical.

              IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
                     Defaults to Warning.

              IPMI_Button_Switch_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
                     Defaults to Critical.

              IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Recoverable
                     Defaults to Critical.

              IPMI_Button_Switch_Transition_Severity_Monitor
                     Defaults to Warning.

              IPMI_Button_Switch_Transition_Severity_Informational
                     Defaults to Nominal.

       IPMI_Module_Board_State
              The following states correspond to Module/Board sensors that report an assertion or deassertion.

              IPMI_Module_Board_State_No_Event
                     Defaults to Nominal.

              IPMI_Module_Board_State_Deasserted
                     Defaults to Nominal.

              IPMI_Module_Board_State_Asserted
                     Defaults to Critical.

       IPMI_Module_Board_Device_Present
              The following states correspond to Module/Board sensors that report on device installation.

              IPMI_Module_Board_Device_Present_No_Event
                     Defaults to Nominal.

              IPMI_Module_Board_Device_Present_Device_Removed_Device_Absent
                     Defaults to Critical.

              IPMI_Module_Board_Device_Present_Device_Inserted_Device_Present
                     Defaults to Nominal.

       IPMI_Chassis_Transition_Severity
              The following states correspond to Chassis sensors that report on device severity.

              IPMI_Chassis_Transition_Severity_No_Event
                     Defaults to Nominal.

              IPMI_Chassis_Transition_Severity_Transition_To_OK
                     Defaults to Nominal.

              IPMI_Chassis_Transition_Severity_Transition_To_Non_Critical_From_OK
                     Defaults to Warning.

              IPMI_Chassis_Transition_Severity_Transition_To_Critical_From_Less_Severe
                     Defaults to Critical.

              IPMI_Chassis_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
                     Defaults to Critical.

              IPMI_Chassis_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
                     Defaults to Warning.

              IPMI_Chassis_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
                     Defaults to Critical.

              IPMI_Chassis_Transition_Severity_Transition_To_Non_Recoverable
                     Defaults to Critical.

              IPMI_Chassis_Transition_Severity_Monitor
                     Defaults to Warning.

              IPMI_Chassis_Transition_Severity_Informational
                     Defaults to Nominal.

       IPMI_Chip_Set_Transition_Severity
              The following states correspond to Chip Set sensors that report on device severity.

              IPMI_Chip_Set_Transition_Severity_No_Event
                     Defaults to Nominal.

              IPMI_Chip_Set_Transition_Severity_Transition_To_OK
                     Defaults to Nominal.

              IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Critical_From_OK
                     Defaults to Warning.

              IPMI_Chip_Set_Transition_Severity_Transition_To_Critical_From_Less_Severe
                     Defaults to Critical.

              IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
                     Defaults to Critical.

              IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
                     Defaults to Warning.

              IPMI_Chip_Set_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
                     Defaults to Critical.

              IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Recoverable
                     Defaults to Critical.

              IPMI_Chip_Set_Transition_Severity_Monitor
                     Defaults to Warning.

              IPMI_Chip_Set_Transition_Severity_Informational
                     Defaults to Nominal.

       IPMI_Cable_Interconnect
              The following states correspond  to  Cable/Interconnect  sensors  w/  Cable/Interconnect  specific
              output states.

              IPMI_Cable_Interconnect_No_Event
                     Defaults to Nominal.

              IPMI_Cable_Interconnect_Is_Connected
                     Defaults to Nominal.

              IPMI_Cable_Interconnect_Configuration_Error
                     Defaults to Critical.

       IPMI_Cable_Interconnect_Transition_Severity
              The following states correspond to Cable/Interconnect sensors that report on device severity.

              IPMI_Cable_Interconnect_Transition_Severity_No_Event
                     Defaults to Nominal.

              IPMI_Cable_Interconnect_Transition_Severity_Transition_To_OK
                     Defaults to Nominal.

              IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Critical_From_OK
                     Defaults to Warning.

              IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Critical_From_Less_Severe
                     Defaults to Critical.

              IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
                     Defaults to Critical.

              IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
                     Defaults to Warning.

              IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
                     Defaults to Critical.

              IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Recoverable
                     Defaults to Critical.

              IPMI_Cable_Interconnect_Transition_Severity_Monitor
                     Defaults to Warning.

              IPMI_Cable_Interconnect_Transition_Severity_Informational
                     Defaults to Nominal.

       IPMI_Boot_Error
              The following states correspond to Boot Error sensors w/ Boot Error specific output states.

              IPMI_Boot_Error_No_Event
                     Defaults to Nominal.

              IPMI_Boot_Error_No_Bootable_Media
                     Defaults to Critical.

              IPMI_Boot_Error_Non_Bootable_Diskette_Left_In_Drive
                     Defaults to Critical.

              IPMI_Boot_Error_PXE_Server_Not_Found
                     Defaults to Critical.

              IPMI_Boot_Error_Invalid_Boot_Sector
                     Defaults to Critical.

              IPMI_Boot_Error_Timeout_Waiting_For_User_Selection_Of_Boot_Source
                     Defaults to Warning.

       IPMI_Boot_Error_State
              The following states correspond to Boot Error sensors that report an assertion or deassertion.

              IPMI_Boot_Error_State_No_Event
                     Defaults to Nominal.

              IPMI_Boot_Error_State_Deasserted
                     Defaults to Nominal.

              IPMI_Boot_Error_State_Asserted
                     Defaults to Critical.

       IPMI_Boot_Error_Transition_Severity
              The following states correspond to Boot Error sensors that report on device severity.

              IPMI_Boot_Error_Transition_Severity_No_Event
                     Defaults to Nominal.

              IPMI_Boot_Error_Transition_Severity_Transition_To_OK
                     Defaults to Nominal.

              IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Critical_From_OK
                     Defaults to Warning.

              IPMI_Boot_Error_Transition_Severity_Transition_To_Critical_From_Less_Severe
                     Defaults to Critical.

              IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
                     Defaults to Critical.

              IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
                     Defaults to Warning.

              IPMI_Boot_Error_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
                     Defaults to Critical.

              IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Recoverable
                     Defaults to Critical.

              IPMI_Boot_Error_Transition_Severity_Monitor
                     Defaults to Warning.

              IPMI_Boot_Error_Transition_Severity_Informational
                     Defaults to Nominal.

       IPMI_OS_Boot
              The following states correspond to OS Boot sensors w/ OS Boot specific output events.
              IPMI_OS_Boot_No_Event  Defaults  to  Nominal.   IPMI_OS_Boot_A_Boot_Completed Defaults to Nominal.
              IPMI_OS_Boot_C_Boot_Completed Defaults to Nominal.   IPMI_OS_Boot_PXE_Boot_Completed  Defaults  to
              Nominal.          IPMI_OS_Boot_Diagnostic_Boot_Completed        Defaults        to        Nominal.
              IPMI_OS_Boot_CD_ROM_Boot_Completed Defaults to Nominal.  IPMI_OS_Boot_ROM_Boot_Completed  Defaults
              to    Nominal.    IPMI_OS_Boot_Boot_Completed_Boot_Device_Not_Specified   Defaults   to   Warning.
              IPMI_OS_Boot_Base_OS_Hypervisor_Installation_Started         Defaults         to          Nominal.
              IPMI_OS_Boot_Base_OS_Hypervisor_Installation_Completed         Defaults         to        Nominal.
              IPMI_OS_Boot_Base_OS_Hypervisor_Installation_Aborted         Defaults         to          Warning.
              IPMI_OS_Boot_Base_OS_Hypervisor_Installation_Failed Defaults to Critical.

       IPMI_OS_Critical_Stop_State
              The  following  states  correspond  to  OS  Critical  Stop  sensors  that  report  an assertion or
              deassertion.

              IPMI_OS_Critical_Stop_State_No_Event
                     Defaults to Nominal.

              IPMI_OS_Critical_Stop_State_Deasserted
                     Defaults to Nominal.

              IPMI_OS_Critical_Stop_State_Asserted
                     Defaults to Critical.

       IPMI_Slot_Connector
              The following states correspond to Slot  Connector  sensors  w/  Slot  Connector  specific  output
              states.

              IPMI_Slot_Connector_No_Event
                     Defaults to Nominal.

              IPMI_Slot_Connector_Fault_Status_Asserted
                     Defaults to Critical.

              IPMI_Slot_Connector_Identify_Status_Asserted
                     Defaults to Warning.

              IPMI_Slot_Connector_Slot_Connector_Device_Installed_Attached
                     Defaults to Nominal.

              IPMI_Slot_Connector_Slot_Connector_Ready_For_Device_Installation
                     Defaults to Nominal.

              IPMI_Slot_Connector_Slot_Connector_Ready_For_Device_Removal
                     Defaults to Nominal.

              IPMI_Slot_Connector_Slot_Power_Is_Off
                     Defaults to Nominal.

              IPMI_Slot_Connector_Slot_Connector_Device_Removal_Request
                     Defaults to Warning.

              IPMI_Slot_Connector_Interlock_Asserted
                     Defaults to Warning.

              IPMI_Slot_Connector_Slot_Is_Disabled
                     Defaults to Warning.

              IPMI_Slot_Connector_Slot_Holds_Spare_Device
                     Defaults to Nominal.

       IPMI_Slot_Connector_Transition_Severity
              The following states correspond to Slot Connector sensors that report on device severity.

              IPMI_Slot_Connector_Transition_Severity_No_Event
                     Defaults to Nominal.

              IPMI_Slot_Connector_Transition_Severity_Transition_To_OK
                     Defaults to Nominal.

              IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Critical_From_OK
                     Defaults to Warning.

              IPMI_Slot_Connector_Transition_Severity_Transition_To_Critical_From_Less_Severe
                     Defaults to Critical.

              IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe
                     Defaults to Critical.

              IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Critical_From_More_Severe
                     Defaults to Warning.

              IPMI_Slot_Connector_Transition_Severity_Transition_To_Critical_From_Non_Recoverable
                     Defaults to Critical.

              IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Recoverable
                     Defaults to Critical.

              IPMI_Slot_Connector_Transition_Severity_Monitor
                     Defaults to Warning.

              IPMI_Slot_Connector_Transition_Severity_Informational
                     Defaults to Nominal.

       IPMI_System_ACPI_Power_State

              IPMI_System_ACPI_Power_State_No_Event
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_S0_G0
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_S1
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_S2
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_S3
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_S4
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_S5_G2
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_S4_S5_Soft_Off
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_G3_Mechanical_Off
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_Sleeping_in_an_S1_S2_or_S3_States
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_G1_Sleeping
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_S5_Entered_By_Override
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_Legacy_ON_State
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_Legacy_OFF_State
                     Defaults to Nominal.

              IPMI_System_ACPI_Power_State_Unspecified
                     Defaults to Critical.

              IPMI_System_ACPI_Power_State_Unknown
                     Defaults to Critical.

       IPMI_Watchdog2
              The following states correspond to Watchdog 2 sensors w/ Watchdog 2 specific output states.

              IPMI_Watchdog2_No_Event
                     Defaults to Nominal.

              IPMI_Watchdog2_Timer_Expired
                     Defaults to Warning.

              IPMI_Watchdog2_Hard_Reset
                     Defaults to Critical.

              IPMI_Watchdog2_Power_Down
                     Defaults to Critical.

              IPMI_Watchdog2_Power_Cycle
                     Defaults to Critical.

              IPMI_Watchdog2_Reserved1
                     Defaults to Nominal.

              IPMI_Watchdog2_Reserved2
                     Defaults to Nominal.

              IPMI_Watchdog2_Reserved3
                     Defaults to Nominal.

              IPMI_Watchdog2_Reserved4
                     Defaults to Nominal.

              IPMI_Watchdog2_Timer_Interrupt
                     Defaults to Warning.

       IPMI_Platform_Alert_State
              The following states correspond to Platform Alert sensors that report an assertion or deassertion.

              IPMI_Platform_Alert_State_No_Event
                     Defaults to Nominal.

              IPMI_Platform_Alert_State_Deasserted
                     Defaults to Nominal.

              IPMI_Platform_Alert_State_Asserted
                     Defaults to Critical.

       IPMI_Entity_Presence
              The  following  states  correspond  to  Entity Presence sensors w/ Entity Presence specific output
              states.

              IPMI_Entity_Presence_No_Event
                     Defaults to Nominal.

              IPMI_Entity_Presence_Entity_Present
                     Defaults to Nominal.

              IPMI_Entity_Presence_Entity_Absent
                     Defaults to Critical.

              IPMI_Entity_Presence_Entity_Disabled
                     Defaults to Critical.

       IPMI_Entity_Presence_Device_Present
              The following states correspond to Entity Presence sensors that report on device installation.

              IPMI_Entity_Presence_Device_Present_No_Event
                     Defaults to Nominal.

              IPMI_Entity_Presence_Device_Present_Device_Removed_Device_Absent
                     Defaults to Nominal.

              IPMI_Entity_Presence_Device_Present_Device_Inserted_Device_Present
                     Defaults to Nominal.

       IPMI_Management_Subsystem_Health
              The following states correspond to Management Subsystem Health  sensors  w/  Management  Subsystem
              Health specific output states.

              IPMI_Management_Subsystem_Health_No_Event
                     Defaults to Nominal.

              IPMI_Management_Subsystem_Health_Sensor_Access_Degraded_Or_Unavailable
                     Defaults to Critical.

              IPMI_Management_Subsystem_Health_Controller_Access_Degraded_Or_Unavailable
                     Defaults to Critical.

              IPMI_Management_Subsystem_Health_Management_Controller_Off_Line
                     Defaults to Critical.

              IPMI_Management_Subsystem_Health_Management_Controller_Unavailable
                     Defaults to Critical.

              IPMI_Management_Subsystem_Health_Sensor_Failure
                     Defaults to Critical.

              IPMI_Management_Subsystem_Health_FRU_Failure
                     Defaults to Critical.

       IPMI_Battery
              The following states correspond to Battery sensors w/ Battery specific output states.

              IPMI_Battery_No_Event
                     Defaults to Nominal.

              IPMI_Battery_Battery_Low
                     Defaults to Warning.

              IPMI_Battery_Battery_Failed
                     Defaults to Critical.

              IPMI_Battery_Battery_Presence_Detected
                     Defaults to Nominal.

       IPMI_Session_Audit
              The following states correspond to Session Audit sensors w/ Session_Audit specific output states.

              IPMI_Version_Change_No_Event
                     Defaults to Nominal.

              IPMI_Version_Change_Hardware_Change_Detected_With_Associated_Entity
                     Defaults to Warning.

              IPMI_Version_Change_Firmware_Or_Software_Change_Detected_With_Associated_Entity
                     Defaults to Warning.

              IPMI_Version_Change_Hardware_Incompatability_Detected_With_Associated_Entity
                     Defaults to Critical.

              IPMI_Version_Change_Firmware_Or_Software_Incompatability_Detected_With_Associated_Entity
                     Defaults to Critical.

              IPMI_Version_Change_Entity_Is_Of_An_Invalid_Or_Unsupported_Hardware_Version
                     Defaults to Critical.

              IPMI_Version_Change_Entity_Contains_An_Invalid_Or_Unsupported_Firmware_Or_Software_Version
                     Defaults to Critical.

              IPMI_Version_Change_Hardware_Change_Detected_With_Associated_Entity_Was_Successful
                     Defaults to Nominal.

              IPMI_Version_Change_Software_Or_FW_Change_Detected_With_Associated_Entity_Was_Successful
                     Defaults to Nominal.

       IPMI_FRU_State
              The following states correspond to FRU State sensors w/ FRU State specific output states.

              IPMI_FRU_State_No_Event
                     Defaults to Nominal.

              IPMI_FRU_State_FRU_Not_Installed
                     Defaults to Critical.

              IPMI_FRU_State_FRU_Inactive
                     Defaults to Critical.

              IPMI_FRU_State_FRU_Activation_Requested
                     Defaults to Warning.

              IPMI_FRU_State_FRU_Activation_In_Progress
                     Defaults to Warning.

              IPMI_FRU_State_FRU_Active
                     Defaults to Nominal.

              IPMI_FRU_State_FRU_Deactivation_Requested
                     Defaults to Warning.

              IPMI_FRU_State_FRU_Deactivation_In_Progress
                     Defaults to Warning.

              IPMI_FRU_State_FRU_Communication_Lost
                     Defaults to Critical.

       IPMI_OEM
              The  following  configuration options can be used to configure OEM specific interpretations. Users
              should be aware that both IPMI_OEM_Bitmask and IPMI_OEM_Value can be configured for  an  identical
              Manufacturer-ID,   Product-ID,   Event-Reading-Type-Code,   and   Sensor-Type   combination.   All
              interpretations rules for a specific combination are iterated  through  and  the  worst  resulting
              sensor  state  is  returned (i.e. Warning < Nominal, Critical < Warning). If no match is found, no
              sensor state is returned for the OEM sensor reading.  For each of the configuration options below,
              <Manufacturer-ID>  is  the  numeric  IANA  manufacturer  ID for the manufacturer in question.  The
              <Product-ID> is one or more numeric IDs representing the manufacturer's product.  The <Product-ID>
              can  be  listed  as  a single numeric number (e.g. 1234), a range of IDs separated by a dash (e.g.
              12-20), or a list  of  specific  product  IDs  separted  by  a  plus  (e.g.  12+19+22).  Both  the
              Manufacturer-ID  and  Product-ID  can  be found using bmc-info(8).  Multiple <Manufacturer-ID> and
              <Product-ID> pairs can be input separated by commas.  The Event-Reading-Type-Code and  Sensor-Type
              need  not  be  OEM  types.  They may be non-OEM types and used to provide interpretation rules for
              sensors that may be behaving outside the standard of the IPMI specification.

              IPMI_OEM_Bitmask    <Manufacturer-ID>:<Product-ID>,...     Event-Reading-Type-Code     Sensor-Type
              Sensor-Event-Bitmask State
                     IPMI_OEM_Bitmask   can  be  used  to  configure  a  state  interpretation  for  a  specific
                     Manufacturer-ID, Product-ID, Event-Reading-Type-Code, and  Sensor-Type  combination  and  a
                     specific   bitmask  of  the  Sensor-Event.  The  state  will  be  accepted  as  the  sensor
                     interpretation if the inputted bitmask ANDed with the actual sensor event  bitmask  reading
                     is  true.  As  a  special  case, the state will be accepted if the inputted bitmask and the
                     actual sensor event bitmask are both 0. In other words,  if  no  events  happened,  an  OEM
                     interpretation can be configured for this case by inputing a bitmask of 0x0000.

              IPMI_OEM_Value      <Manufacturer-ID>:<Product-ID>,...     Event-Reading-Type-Code     Sensor-Type
              Sensor-Event-Bitmask-Value State
                     IPMI_OEM_Value  can  be  used  to  configure  a  state  interpretation   for   a   specific
                     Manufacturer-ID,  Product-ID,  Event-Reading-Type-Code,  and  Sensor-Type combination and a
                     specific value for the Sensor-Event-Bitmask. The state  will  be  accepted  as  the  sensor
                     interpretation  if  the  inputted bitmask value is equal to the actual sensor event bitmask
                     reading.

FILES

       /etc/freeipmi//freeipmi_interpret_sensor.conf

REPORTING BUGS

       Report bugs to <freeipmi-users@gnu.org> or <freeipmi-devel@gnu.org>.

       Copyright (C) 2007-2014 Lawrence Livermore National Security, LLC.

       This library is free software; you can redistribute it and/or modify  it  under  the  terms  of  the  GNU
       General  Public License as published by the Free Software Foundation; either version 3 of the License, or
       (at your option) any later version.

SEE ALSO

       libfreeipmi(3), libipmimonitoring(3), ipmi-sensors(8)

       http://www.gnu.org/software/freeipmi/