Provided by: sympa_6.2.24~dfsg-1_amd64 
NAME
list_config - Configuration file for mailing list
DESCRIPTION
config is main configuration file of the mailing list.
Format of config is as following:
• Lines beginning with "#" and containing only spaces are ignored.
• There are parameters with single line and multiple lines:
• On single line parameters, each line has the form "parameter value". value may
contain spaces but may not contain newlines.
Several parameters may have multiple vlues. If it's the case, values may be
separated by comma (",") or parameter lines may be repeated. Some of parameters
must have one or more of limited values.
Example:
subject This is subject of my list
remove_headers User-Agent,Importance
custom_headers X-List: mylist
custom_headers X-Face: %`-W7!?^]Sg'I-K>P<cdn&k:~A^{x>(]Gc{V...
rfc2369_header_fields post,owner
• A multiple line parameter, so-called "paragraph", consists of the first line
specifying parameter name and subsequent one or more sub-parameter lines.
Paragraph must be separated by one or more empty lines from the other parameters.
Several multiple line parameters may occur multiple times.
PARAMETERS
Below is entire list of configuration parameters. "Default" is built-in default value if
any.
List definition
"subject"
Subject of the list
Format:
/".+"/
Default:
None, mandatory.
This parameter indicates the subject of the list, which is sent in response to the LISTS
mail command. The subject is a free form text limited to one line.
"visibility"
Visibility of the list
Format:
Name of "visibility" scenario.
Default:
"default"
This parameter indicates whether the list should feature in the output generated in
response to a LISTS command or should be shown in the list overview of the web-interface.
"owner"
Owner
Multiple occurrences allowed, mandatory
Owners are managing subscribers of the list. They may review subscribers and add or delete
email addresses from the mailing list. If you are a privileged owner of the list, you can
choose other owners for the mailing list. Privileged owners may edit a few more options
than other owners.
"owner.email"
email address
Format:
/$email/
Default:
None, mandatory.
"owner.gecos"
name
Format:
/".+"/
Default:
None.
"owner.info"
private information
Format:
/".+"/
Default:
None.
"owner.profile"
profile
Format:
"privileged" - privileged owner
"normal" - normal owner
Default:
"normal"
"owner.reception"
reception mode
Format:
"mail" - receive notification email
"nomail" - no notifications
Default:
"mail"
"owner.visibility"
visibility
Format:
"conceal" - concealed from list menu
"noconceal" - listed on the list menu
Default:
"noconceal"
"owner_include"
Owners defined in an external data source
Multiple occurrences allowed
"owner_include.source"
the datasource
Format:
/"[\w-]+"/
Default:
None, mandatory.
"owner_include.source_parameters"
datasource parameters
Format:
/".*"/
Default:
None.
"owner_include.profile"
profile
Format:
"privileged" - privileged owner
"normal" - normal owner
Default:
"normal"
"owner_include.reception"
reception mode
Format:
"mail" - receive notification email
"nomail" - no notifications
Default:
"mail"
"owner_include.visibility"
visibility
Format:
"conceal" - concealed from list menu
"noconceal" - listed on the list menu
Default:
"noconceal"
"editor"
Moderators
Multiple occurrences allowed
Editors are responsible for moderating messages. If the mailing list is moderated,
messages posted to the list will first be passed to the editors, who will decide whether
to distribute or reject it.
FYI: Defining editors will not make the list moderated; you will have to set the "send"
parameter.
FYI: If the list is moderated, any editor can distribute or reject a message without the
knowledge or consent of the other editors. Messages that have not been distributed or
rejected will remain in the moderation spool until they are acted on.
"editor.email"
email address
Format:
/$email/
Default:
None, mandatory.
"editor.gecos"
name
Format:
/".+"/
Default:
None.
"editor.info"
private information
Format:
/".+"/
Default:
None.
"editor.reception"
reception mode
Format:
"mail" - receive notification email
"nomail" - no notifications
Default:
"mail"
"editor.visibility"
visibility
Format:
"conceal" - concealed from list menu
"noconceal" - listed on the list menu
Default:
"noconceal"
"editor_include"
Moderators defined in an external data source
Multiple occurrences allowed
"editor_include.source"
the data source
Format:
/"[\w-]+"/
Default:
None, mandatory.
"editor_include.source_parameters"
data source parameters
Format:
/".*"/
Default:
None.
"editor_include.reception"
reception mode
Format:
"mail" - receive notification email
"nomail" - no notifications
Default:
"mail"
"editor_include.visibility"
visibility
Format:
"conceal" - concealed from list menu
"noconceal" - listed on the list menu
Default:
"noconceal"
"topics"
Topics for the list
Format:
Multiple values allowed, separated by ",".
List topic.
Default:
None.
This parameter allows the classification of lists. You may define multiple topics as well
as hierarchical ones. WWSympa's list of public lists uses this parameter.
"host"
Internet domain
Format:
/$host/
Default:
Value of "host" parameter in sympa.conf or robot.conf.
Domain name of the list, default is the robot domain name set in the related robot.conf
file or in file sympa.conf.
"lang"
Language of the list
Format:
Language tag.
Default:
Value of "lang" parameter in sympa.conf or robot.conf.
This parameter defines the language used for the list. It is used to initialize a user's
language preference; Sympa command reports are extracted from the associated message
catalog.
"family_name"
Family name
Format:
/$family_name/
Default:
None.
"max_list_members"
Maximum number of list members
Format:
Number of list members.
Default:
Value of "default_max_list_members" parameter in sympa.conf or robot.conf.
limit for the number of subscribers. 0 means no limit.
"priority"
Priority
Format:
0 - 0 - highest priority
1 - 1
2 - 2
3 - 3
4 - 4
5 - 5
6 - 6
7 - 7
8 - 8
9 - 9 - lowest priority
"z" - queue messages only
Default:
Value of "default_list_priority" parameter in sympa.conf or robot.conf.
The priority with which Sympa will process messages for this list. This level of priority
is applied while the message is going through the spool. The z priority will freeze the
message in the spool.
Sending/receiving setup
"send"
Who can send messages
Format:
Name of "send" scenario.
Default:
"default"
This parameter specifies who can send messages to the list.
"delivery_time"
Delivery time (hh:mm)
Format:
/"[0-2]?\d\:[0-6]\d"/
Default:
None.
"digest"
Digest frequency
Single occurrence
Definition of digest mode. If this parameter is present, subscribers can select the option
of receiving messages in multipart/digest MIME format, or as a plain text digest. Messages
are then grouped together, and compiled messages are sent to subscribers according to the
frequency selected with this parameter.
"digest.days"
days
Format:
Multiple occurrences allowed.
Day of week, 0 - 6.
Default:
None, mandatory.
"digest.hour"
hour
Format:
/"\d+"/
Default:
None, mandatory.
"digest.minute"
minute
Format:
/"\d+"/
Default:
None, mandatory.
"digest_max_size"
Digest maximum number of messages
Format:
Number of messages.
Default:
25
"available_user_options"
Available subscription options
Single occurrence
"available_user_options.reception"
reception mode
Format:
Multiple values allowed, separated by ",".
Reception mode of list member.
Default:
"mail,notice,digest,digestplain,summary,nomail,txt,urlize,not_me"
Only these modes will be allowed for the subscribers of this list. If a subscriber has a
reception mode not in the list, Sympa uses the mode specified in the default_user_options
paragraph.
"default_user_options"
Subscription profile
Single occurrence
Default profile for the subscribers of the list.
"default_user_options.reception"
reception mode
Format:
Reception mode of list member.
Default:
"mail"
Mail reception mode.
"default_user_options.visibility"
visibility
Format:
Visibility mode of list memeber.
Default:
"noconceal"
Visibility of the subscriber.
"msg_topic"
Topics for message categorization
Multiple occurrences allowed
This paragraph defines a topic used to tag a message of a list, named by msg_topic.name
("other" is a reserved word), its title is msg_topic.title. The msg_topic.keywords entry
is optional and allows automatic tagging. This should be a list of keywords, separated by
','.
"msg_topic.name"
Message topic name
Format:
/"[\-\w]+"/
Default:
None, mandatory.
"msg_topic.keywords"
Message topic keywords
Format:
/"[^,\n]+(,[^,\n]+)*"/
Default:
None.
"msg_topic.title"
Message topic title
Format:
/".+"/
Default:
None, mandatory.
"msg_topic_keywords_apply_on"
Defines to which part of messages topic keywords are applied
Format:
"subject" - subject field
"body" - message body
"subject_and_body" - subject and body
Default:
"subject"
This parameter indicates which part of the message is used to perform automatic tagging.
"msg_topic_tagging"
Message tagging
Format:
"required_sender" - required to post message
"required_moderator" - required to distribute message
"optional" - optional
Default:
"optional"
This parameter indicates if the tagging is optional or required for a list.
"reply_to_header"
Reply address
Single occurrence
This defines what Sympa will place in the Reply-To: SMTP header field of the messages it
distributes.
"reply_to_header.value"
value
Format:
"sender" - sender
"list" - list
"all" - all
"other_email" - other email address
Default:
"sender"
This parameter indicates whether the Reply-To: field should indicate the sender of the
message (sender), the list itself (list), both list and sender (all) or an arbitrary
e-mail address (defined by the other_email parameter).
Note: it is inadvisable to change this parameter, and particularly inadvisable to set it
to list. Experience has shown it to be almost inevitable that users, mistakenly believing
that they are replying only to the sender, will send private messages to a list. This can
lead, at the very least, to embarrassment, and sometimes to more serious consequences.
"reply_to_header.other_email"
other email address
Format:
/$email/
Default:
None.
If value was set to other_email, this parameter defines the e-mail address used.
"reply_to_header.apply"
respect of existing header field
Format:
"forced" - overwrite Reply-To: header field
"respect" - preserve existing header field
Default:
"respect"
The default is to respect (preserve) the existing Reply-To: SMTP header field in incoming
messages. If set to forced, Reply-To: SMTP header field will be overwritten.
"anonymous_sender"
Anonymous sender
Format:
/".+"/
Default:
None.
To hide the sender's email address before distributing the message. It is replaced by the
provided email address.
"custom_header"
Custom header field
Format:
Multiple occurrences allowed.
/"\S+:\s+.*"/
Default:
None.
This parameter is optional. The headers specified will be added to the headers of messages
distributed via the list. As of release 1.2.2 of Sympa, it is possible to put several
custom header lines in the configuration file at the same time.
"custom_subject"
Subject tagging
Format:
/".+"/
Default:
None.
This parameter is optional. It specifies a string which is added to the subject of
distributed messages (intended to help users who do not use automatic tools to sort
incoming messages). This string will be surrounded by [] characters.
"footer_type"
Attachment type
Format:
"mime" - add a new MIME part
"append" - append to message body
Default:
"mime"
List owners may decide to add message headers or footers to messages sent via the list.
This parameter defines the way a footer/header is added to a message.
mime:
The default value. Sympa will add the footer/header as a new MIME part.
append:
Sympa will not create new MIME parts, but will try to append the header/footer to the body
of the message. Predefined message-footers will be ignored. Headers/footers may be
appended to text/plain messages only.
"max_size"
Maximum message size
Format:
Number of bytes.
Default:
Value of "max_size" parameter in sympa.conf or robot.conf.
Maximum size of a message in 8-bit bytes.
"merge_feature"
Allow message personalization
Format:
"on" - enabled
"off" - disabled
Default:
Value of "merge_feature" parameter in sympa.conf.
"message_hook"
Hook modules for message processing
Single occurrence
"message_hook.pre_distribute"
A hook on the messages before distribution
Format:
/"(::|\w)+"/
Default:
None.
"message_hook.post_archive"
A hook on the messages just after archiving
Format:
/"(::|\w)+"/
Default:
None.
"reject_mail_from_automates_feature"
Reject mail from automatic processes (crontab, etc)?
Format:
"on" - enabled
"off" - disabled
Default:
Value of "reject_mail_from_automates_feature" parameter in sympa.conf.
"remove_headers"
Incoming SMTP header fields to be removed
Format:
Multiple values allowed, separated by ",".
/"\S+"/
Default:
Value of "remove_headers" parameter in sympa.conf.
"remove_outgoing_headers"
Outgoing SMTP header fields to be removed
Format:
Multiple values allowed, separated by ",".
/"\S+"/
Default:
Value of "remove_outgoing_headers" parameter in sympa.conf.
"rfc2369_header_fields"
RFC 2369 Header fields
Format:
Multiple values allowed, separated by ",".
"help" - help
"subscribe" - subscription
"unsubscribe" - unsubscription
"post" - posting address
"owner" - owner
"archive" - list archive
Default:
Value of "rfc2369_header_fields" parameter in sympa.conf.
"forced_reply_to"
Deprecated.
"reply_to"
Deprecated.
Privileges
"info"
Who can view list information
Format:
Name of "info" scenario.
Default:
"default"
"subscribe"
Who can subscribe to the list
Format:
Name of "subscribe" scenario.
Default:
"default"
The subscribe parameter defines the rules for subscribing to the list.
"add"
Who can add subscribers
Format:
Name of "add" scenario.
Default:
"default"
Privilege for adding (ADD command) a subscriber to the list
"unsubscribe"
Who can unsubscribe
Format:
Name of "unsubscribe" scenario.
Default:
"default"
This parameter specifies the unsubscription method for the list. Use open_notify or
auth_notify to allow owner notification of each unsubscribe command.
"del"
Who can delete subscribers
Format:
Name of "del" scenario.
Default:
"default"
"invite"
Who can invite people
Format:
Name of "invite" scenario.
Default:
"default"
"remind"
Who can start a remind process
Format:
Name of "remind" scenario.
Default:
"default"
This parameter specifies who is authorized to use the remind command.
"review"
Who can review subscribers
Format:
Name of "review" scenario.
Default:
"default"
This parameter specifies who can access the list of members. Since subscriber addresses
can be abused by spammers, it is strongly recommended that you only authorize owners or
subscribers to access the subscriber list.
"owner_domain"
Required domains for list owners
Format:
/"$host( +$host)*"/
Default:
Value of "owner_domain" parameter in sympa.conf or robot.conf.
Restrict list ownership to addresses in the specified domains.
"owner_domain_min"
Minimum owners in required domains
Format:
/"\d+"/
Default:
Value of "owner_domain_min" parameter in sympa.conf or robot.conf.
Require list ownership by a minimum number of addresses in the specified domains.
"shared_doc"
Shared documents
Single occurrence
This paragraph defines read and edit access to the shared document repository.
"shared_doc.d_read"
Who can view
Format:
Name of "d_read" scenario.
Default:
"default"
"shared_doc.d_edit"
Who can edit
Format:
Name of "d_edit" scenario.
Default:
"default"
"shared_doc.quota"
quota
Format:
Number of Kbytes.
Default:
Value of "default_shared_quota" parameter in sympa.conf or robot.conf.
Archives
"process_archive"
Store distributed messages into archive
Format:
"on" - enabled
"off" - disabled
Default:
Value of "process_archive" parameter in sympa.conf or robot.conf.
"archive"
Archives
Single occurrence
Privilege for reading mail archives and frequency of archiving
Defines who can access the web archive for the list.
"archive.period"
Deprecated.
"archive.access"
Deprecated.
"archive.web_access"
access right
Format:
Name of "access_web_archive" scenario.
Default:
None.
"archive.mail_access"
access right by mail commands
Format:
Name of "archive_mail_access" scenario.
Default:
"default"
"archive.quota"
quota
Format:
Number of Kbytes.
Default:
Value of "default_archive_quota" parameter in sympa.conf.
"archive.max_month"
Maximum number of month archived
Format:
Number of months.
Default:
None.
"archive_crypted_msg"
Archive encrypted mails as cleartext
Format:
"original" - original messages
"decrypted" - decrypted messages
Default:
"original"
"web_archive_spam_protection"
email address protection method
Format:
"cookie" - use HTTP cookie
"javascript" - use JavaScript
"at" - replace @ characters
"none" - do nothing
Default:
Value of "web_archive_spam_protection" parameter in sympa.conf or robot.conf.
Idem spam_protection is provided but it can be used only for web archives. Access requires
a cookie, and users must submit a small form in order to receive a cookie before browsing
the archives. This blocks all robot, even google and co.
"web_archive"
Deprecated.
Bounces
"bounce"
Bounces management
Single occurrence
"bounce.warn_rate"
warn rate
Format:
Number of %.
Default:
Value of "bounce_warn_rate" parameter in sympa.conf.
The list owner receives a warning whenever a message is distributed and the number
(percentage) of bounces exceeds this value.
"bounce.halt_rate"
Deprecated.
"bouncers_level1"
Management of bouncers, 1st level
Single occurrence
Level 1 is the lower level of bouncing users
"bouncers_level1.rate"
threshold
Format:
Number of points.
Default:
Value of "default_bounce_level1_rate" parameter in sympa.conf or robot.conf.
Each bouncing user have a score (from 0 to 100).
This parameter defines a lower limit for each category of bouncing users.For example,
level 1 begins from 45 to level_2_treshold.
"bouncers_level1.action"
action for this population
Format:
"remove_bouncers" - remove bouncing users
"notify_bouncers" - send notify to bouncing users
"none" - do nothing
Default:
"notify_bouncers"
This parameter defines which task is automaticaly applied on level 1 bouncers.
"bouncers_level1.notification"
notification
Format:
"none" - do nothing
"owner" - owner
"listmaster" - listmaster
Default:
"owner"
When automatic task is executed on level 1 bouncers, a notification email can be send to
listowner or listmaster.
"bouncers_level2"
Management of bouncers, 2nd level
Single occurrence
Level 2 is the highest level of bouncing users
"bouncers_level2.rate"
threshold
Format:
Number of points.
Default:
Value of "default_bounce_level2_rate" parameter in sympa.conf or robot.conf.
Each bouncing user have a score (from 0 to 100).
This parameter defines the score range defining each category of bouncing users.For
example, level 2 is for users with a score between 80 and 100.
"bouncers_level2.action"
action for this population
Format:
"remove_bouncers" - remove bouncing users
"notify_bouncers" - send notify to bouncing users
"none" - do nothing
Default:
"remove_bouncers"
This parameter defines which task is automaticaly applied on level 2 bouncers.
"bouncers_level2.notification"
notification
Format:
"none" - do nothing
"owner" - owner
"listmaster" - listmaster
Default:
"owner"
When automatic task is executed on level 2 bouncers, a notification email can be send to
listowner or listmaster.
"verp_rate"
percentage of list members in VERP mode
Format:
"100%" - 100% - always
"50%" - 50%
"33%" - 33%
"25%" - 25%
"20%" - 20%
"10%" - 10%
"5%" - 5%
"2%" - 2%
"0%" - 0% - never
Default:
Value of "verp_rate" parameter in sympa.conf or robot.conf.
"tracking"
Message tracking feature
Single occurrence
"tracking.delivery_status_notification"
tracking message by delivery status notification
Format:
"on" - enabled
"off" - disabled
Default:
Value of "tracking_delivery_status_notification" parameter in sympa.conf.
"tracking.message_disposition_notification"
tracking message by message disposition notification
Format:
"on" - enabled
"on_demand" - on demand
"off" - disabled
Default:
Value of "tracking_message_disposition_notification" parameter in sympa.conf.
"tracking.tracking"
who can view message tracking
Format:
Name of "tracking" scenario.
Default:
"default"
"tracking.retention_period"
Tracking datas are removed after this number of days
Format:
Number of days.
Default:
Value of "tracking_default_retention_period" parameter in sympa.conf.
"welcome_return_path"
Welcome return-path
Format:
"unique" - bounce management
"owner" - owner
Default:
Value of "welcome_return_path" parameter in sympa.conf.
If set to unique, the welcome message is sent using a unique return path in order to
remove the subscriber immediately in the case of a bounce.
"remind_return_path"
Return-path of the REMIND command
Format:
"unique" - bounce management
"owner" - owner
Default:
Value of "remind_return_path" parameter in sympa.conf.
Same as welcome_return_path, but applied to remind messages.
Data sources setup
"inclusion_notification_feature"
Notify subscribers when they are included from a data source?
Format:
"on" - enabled
"off" - disabled
Default:
"off"
"member_include"
Users included from parameterizable data sources
Multiple occurrences allowed
"member_include.source"
the data source
Format:
/"[\w-]+"/
Default:
None, mandatory.
"member_include.source_parameters"
data source parameters
Format:
/".*"/
Default:
None.
"sql_fetch_timeout"
Timeout for fetch of include_sql_query
Format:
Number of seconds.
Default:
Value of "default_sql_fetch_timeout" parameter in sympa.conf.
"include_file"
File inclusion
Format:
Multiple occurrences allowed.
/"\S+"/
Default:
None.
Include subscribers from this file. The file should contain one e-mail address per line
(lines beginning with a "#" are ignored).
"include_remote_file"
Remote file inclusion
Multiple occurrences allowed
"include_remote_file.name"
short name for this source
Format:
/".+"/
Default:
None.
"include_remote_file.url"
data location URL
Format:
/".+"/
Default:
None, mandatory.
"include_remote_file.user"
remote user
Format:
/".+"/
Default:
None.
"include_remote_file.passwd"
remote password
Format:
The value to be concealed.
Default:
None.
"include_sympa_list"
List inclusion
Multiple occurrences allowed
Include subscribers from other list. All subscribers of list listname become subscribers
of the current list. You may include as many lists as required, using one
include_sympa_list paragraph for each included list. Any list at all may be included; you
may therefore include lists which are also defined by the inclusion of other lists. Be
careful, however, not to include list A in list B and then list B in list A, since this
will give rise to an infinite loop.
"include_sympa_list.name"
short name for this source
Format:
/".+"/
Default:
None.
"include_sympa_list.listname"
list name to include
Format:
/"$listname(\@$host)?"/
Default:
None, mandatory.
"include_sympa_list.filter"
filter definition
Format:
/".*"/
Default:
None.
"include_remote_sympa_list"
remote list inclusion
Multiple occurrences allowed
Sympa can contact another Sympa service using HTTPS to fetch a remote list in order to
include each member of a remote list as subscriber. You may include as many lists as
required, using one include_remote_sympa_list paragraph for each included list. Be
careful, however, not to give rise to an infinite loop resulting from cross includes.
For this operation, one Sympa site acts as a server while the other one acs as client. On
the server side, the only setting needed is to give permission to the remote Sympa to
review the list. This is controlled by the review scenario.
"include_remote_sympa_list.name"
short name for this source
Format:
/".+"/
Default:
None.
"include_remote_sympa_list.host"
remote host
Format:
/$host/
Default:
None, mandatory.
"include_remote_sympa_list.port"
remote port
Format:
/"\d+"/
Default:
443
"include_remote_sympa_list.path"
remote path of sympa list dump
Format:
/"\S+"/
Default:
None, mandatory.
"include_remote_sympa_list.cert"
certificate for authentication by remote Sympa
Format:
"robot" - robot
"list" - list
Default:
"list"
"include_ldap_query"
LDAP query inclusion
Multiple occurrences allowed
This paragraph defines parameters for a query returning a list of subscribers. This
feature requires the Net::LDAP (perlldap) PERL module.
"include_ldap_query.name"
short name for this source
Format:
/".+"/
Default:
None.
"include_ldap_query.host"
remote host
Format:
/$multiple_host_or_url/
Default:
None, mandatory.
"include_ldap_query.port"
Deprecated.
"include_ldap_query.use_tls"
use TLS (formerly SSL)
Format:
"starttls" - use STARTTLS
"ldaps" - use LDAPS (LDAP over TLS)
"none" - do nothing
Default:
"none"
"include_ldap_query.ssl_version"
SSL version
Format:
"sslv2" - SSL version 2
"sslv3" - SSL version 3
"tlsv1" - TLS version 1
"tlsv1_1" - TLS version 1.1
"tlsv1_2" - TLS version 1.2
Default:
"tlsv1"
"include_ldap_query.ssl_ciphers"
SSL ciphers used
Format:
/".+"/
Default:
"ALL"
"include_ldap_query.ca_verify"
Certificate verification
Format:
"none" - do nothing
"optional" - optional
"required" - required
Default:
"required"
"include_ldap_query.user"
remote user
Format:
/".+"/
Default:
None.
"include_ldap_query.passwd"
remote password
Format:
The value to be concealed.
Default:
None.
"include_ldap_query.suffix"
suffix
Format:
/".+"/
Default:
None.
"include_ldap_query.scope"
search scope
Format:
"base" - base
"one" - one level
"sub" - subtree
Default:
"sub"
"include_ldap_query.timeout"
connection timeout
Format:
Number of seconds.
Default:
30
"include_ldap_query.filter"
filter
Format:
/".+"/
Default:
None, mandatory.
"include_ldap_query.attrs"
extracted attribute
Format:
/"$ldap_attrdesc(\s*,\s*$ldap_attrdesc)?"/
Default:
"mail"
"include_ldap_query.select"
selection (if multiple)
Format:
"all" - all
"first" - first entry
Default:
"first"
"include_ldap_query.nosync_time_ranges"
Time ranges when inclusion is not allowed
Format:
/$time_ranges/
Default:
None.
"include_ldap_query.use_ssl"
Obsoleted. Use "use_tls".
"include_ldap_2level_query"
LDAP 2-level query inclusion
Multiple occurrences allowed
This paragraph defines parameters for a two-level query returning a list of subscribers.
Usually the first-level query returns a list of DNs and the second-level queries convert
the DNs into e-mail addresses. This feature requires the Net::LDAP (perlldap) PERL module.
"include_ldap_2level_query.name"
short name for this source
Format:
/".+"/
Default:
None.
"include_ldap_2level_query.host"
remote host
Format:
/$multiple_host_or_url/
Default:
None, mandatory.
"include_ldap_2level_query.port"
Deprecated.
"include_ldap_2level_query.use_tls"
use TLS (formerly SSL)
Format:
"starttls" - use STARTTLS
"ldaps" - use LDAPS (LDAP over TLS)
"none" - do nothing
Default:
"none"
"include_ldap_2level_query.ssl_version"
SSL version
Format:
"sslv2" - SSL version 2
"sslv3" - SSL version 3
"tlsv1" - TLS version 1
"tlsv1_1" - TLS version 1.1
"tlsv1_2" - TLS version 1.2
Default:
"tlsv1"
"include_ldap_2level_query.ssl_ciphers"
SSL ciphers used
Format:
/".+"/
Default:
"ALL"
"include_ldap_2level_query.ca_verify"
Certificate verification
Format:
"none" - do nothing
"optional" - optional
"required" - required
Default:
"required"
"include_ldap_2level_query.user"
remote user
Format:
/".+"/
Default:
None.
"include_ldap_2level_query.passwd"
remote password
Format:
The value to be concealed.
Default:
None.
"include_ldap_2level_query.suffix1"
first-level suffix
Format:
/".+"/
Default:
None.
"include_ldap_2level_query.scope1"
first-level search scope
Format:
"base" - base
"one" - one level
"sub" - subtree
Default:
"sub"
"include_ldap_2level_query.timeout1"
first-level connection timeout
Format:
Number of seconds.
Default:
30
"include_ldap_2level_query.filter1"
first-level filter
Format:
/".+"/
Default:
None, mandatory.
"include_ldap_2level_query.attrs1"
first-level extracted attribute
Format:
/$ldap_attrdesc/
Default:
None.
"include_ldap_2level_query.select1"
first-level selection
Format:
"all" - all
"first" - first entry
"regex" - entries matching regular expression
Default:
"first"
"include_ldap_2level_query.regex1"
first-level regular expression
Format:
/".+"/
Default:
""
"include_ldap_2level_query.suffix2"
second-level suffix template
Format:
/".+"/
Default:
None.
"include_ldap_2level_query.scope2"
second-level search scope
Format:
"base" - base
"one" - one level
"sub" - subtree
Default:
"sub"
"include_ldap_2level_query.timeout2"
second-level connection timeout
Format:
Number of seconds.
Default:
30
"include_ldap_2level_query.filter2"
second-level filter template
Format:
/".+"/
Default:
None, mandatory.
"include_ldap_2level_query.attrs2"
second-level extracted attribute
Format:
/"$ldap_attrdesc(\s*,\s*$ldap_attrdesc)?"/
Default:
"mail"
"include_ldap_2level_query.select2"
second-level selection
Format:
"all" - all
"first" - first entry
"regex" - entries matching regular expression
Default:
"first"
"include_ldap_2level_query.regex2"
second-level regular expression
Format:
/".+"/
Default:
""
"include_ldap_2level_query.nosync_time_ranges"
Time ranges when inclusion is not allowed
Format:
/$time_ranges/
Default:
None.
"include_ldap_2level_query.use_ssl"
Obsoleted. Use "use_tls".
"include_sql_query"
SQL query inclusion
Multiple occurrences allowed
This parameter is used to define the SQL query parameters.
"include_sql_query.name"
short name for this source
Format:
/".+"/
Default:
None.
"include_sql_query.db_type"
database type
Format:
/"\S+"/
Default:
None, mandatory.
"include_sql_query.host"
remote host
Format:
/$host/
Default:
None.
"include_sql_query.db_port"
database port
Format:
/"\d+"/
Default:
None.
"include_sql_query.connect_options"
connection options
Format:
/".+"/
Default:
None.
"include_sql_query.db_name"
database name
Format:
/"\S+"/
Default:
None, mandatory.
"include_sql_query.db_env"
environment variables for database connection
Format:
/"\w+\=\S+(;\w+\=\S+)*"/
Default:
None.
"include_sql_query.user"
remote user
Format:
/"\S+"/
Default:
None, mandatory.
"include_sql_query.passwd"
remote password
Format:
The value to be concealed.
Default:
None.
"include_sql_query.sql_query"
SQL query
Format:
/$sql_query/
Default:
None, mandatory.
"include_sql_query.f_dir"
Directory where the database is stored (used for DBD::CSV only)
Format:
/".+"/
Default:
None.
"include_sql_query.nosync_time_ranges"
Time ranges when inclusion is not allowed
Format:
/$time_ranges/
Default:
None.
"include_voot_group"
VOOT group inclusion
Multiple occurrences allowed
"include_voot_group.name"
short name for this source
Format:
/".+"/
Default:
None.
"include_voot_group.user"
user
Format:
/"\S+"/
Default:
None, mandatory.
"include_voot_group.provider"
provider
Format:
/"\S+"/
Default:
None, mandatory.
"include_voot_group.group"
group
Format:
/"\S+"/
Default:
None, mandatory.
"ttl"
Inclusions timeout
Format:
Number of seconds.
Default:
3600
Sympa caches user data extracted using the include parameter. Their TTL (time-to-live)
within Sympa can be controlled using this parameter. The default value is 3600
"distribution_ttl"
Inclusions timeout for message distribution
Format:
Number of seconds.
Default:
None.
This parameter defines the delay since the last synchronization after which the user's
list will be updated before performing either of following actions:
* Reviewing list members
* Message distribution
"include_ldap_ca"
LDAP query custom attribute
Multiple occurrences allowed
"include_ldap_ca.name"
short name for this source
Format:
/".+"/
Default:
None.
"include_ldap_ca.host"
remote host
Format:
/$multiple_host_or_url/
Default:
None, mandatory.
"include_ldap_ca.port"
Deprecated.
"include_ldap_ca.use_tls"
use TLS (formerly SSL)
Format:
"starttls" - use STARTTLS
"ldaps" - use LDAPS (LDAP over TLS)
"none" - do nothing
Default:
"none"
"include_ldap_ca.ssl_version"
SSL version
Format:
"sslv2" - SSL version 2
"sslv3" - SSL version 3
"tlsv1" - TLS version 1
"tlsv1_1" - TLS version 1.1
"tlsv1_2" - TLS version 1.2
Default:
"tlsv1"
"include_ldap_ca.ssl_ciphers"
SSL ciphers used
Format:
/".+"/
Default:
"ALL"
"include_ldap_ca.ca_verify"
Certificate verification
Format:
"none" - do nothing
"optional" - optional
"required" - required
Default:
"required"
"include_ldap_ca.user"
remote user
Format:
/".+"/
Default:
None.
"include_ldap_ca.passwd"
remote password
Format:
The value to be concealed.
Default:
None.
"include_ldap_ca.suffix"
suffix
Format:
/".+"/
Default:
None.
"include_ldap_ca.scope"
search scope
Format:
"base" - base
"one" - one level
"sub" - subtree
Default:
"sub"
"include_ldap_ca.timeout"
connection timeout
Format:
Number of seconds.
Default:
30
"include_ldap_ca.filter"
filter
Format:
/".+"/
Default:
None, mandatory.
"include_ldap_ca.attrs"
extracted attribute
Format:
/$ldap_attrdesc/
Default:
"mail"
"include_ldap_ca.email_entry"
Name of email entry
Format:
/"\S+"/
Default:
None, mandatory.
"include_ldap_ca.select"
selection (if multiple)
Format:
"all" - all
"first" - first entry
Default:
"first"
"include_ldap_ca.nosync_time_ranges"
Time ranges when inclusion is not allowed
Format:
/$time_ranges/
Default:
None.
"include_ldap_ca.use_ssl"
Obsoleted. Use "use_tls".
"include_ldap_2level_ca"
LDAP 2-level query custom attribute
Multiple occurrences allowed
"include_ldap_2level_ca.host"
remote host
Format:
/$multiple_host_or_url/
Default:
None, mandatory.
"include_ldap_2level_ca.name"
short name for this source
Format:
/".+"/
Default:
None.
"include_ldap_2level_ca.port"
Deprecated.
"include_ldap_2level_ca.use_tls"
use TLS (formerly SSL)
Format:
"starttls" - use STARTTLS
"ldaps" - use LDAPS (LDAP over TLS)
"none" - do nothing
Default:
"none"
"include_ldap_2level_ca.ssl_version"
SSL version
Format:
"sslv2" - SSL version 2
"sslv3" - SSL version 3
"tlsv1" - TLS version 1
"tlsv1_1" - TLS version 1.1
"tlsv1_2" - TLS version 1.2
Default:
"tlsv1"
"include_ldap_2level_ca.ssl_ciphers"
SSL ciphers used
Format:
/".+"/
Default:
"ALL"
"include_ldap_2level_ca.ca_verify"
Certificate verification
Format:
"none" - do nothing
"optional" - optional
"required" - required
Default:
"required"
"include_ldap_2level_ca.user"
remote user
Format:
/".+"/
Default:
None.
"include_ldap_2level_ca.passwd"
remote password
Format:
The value to be concealed.
Default:
None.
"include_ldap_2level_ca.suffix1"
first-level suffix
Format:
/".+"/
Default:
None.
"include_ldap_2level_ca.scope1"
first-level search scope
Format:
"base" - base
"one" - one level
"sub" - subtree
Default:
"sub"
"include_ldap_2level_ca.timeout1"
first-level connection timeout
Format:
Number of seconds.
Default:
30
"include_ldap_2level_ca.filter1"
first-level filter
Format:
/".+"/
Default:
None, mandatory.
"include_ldap_2level_ca.attrs1"
first-level extracted attribute
Format:
/$ldap_attrdesc/
Default:
None.
"include_ldap_2level_ca.select1"
first-level selection
Format:
"all" - all
"first" - first entry
"regex" - entries matching regular expression
Default:
"first"
"include_ldap_2level_ca.regex1"
first-level regular expression
Format:
/".+"/
Default:
""
"include_ldap_2level_ca.suffix2"
second-level suffix template
Format:
/".+"/
Default:
None.
"include_ldap_2level_ca.scope2"
second-level search scope
Format:
"base" - base
"one" - one level
"sub" - subtree
Default:
"sub"
"include_ldap_2level_ca.timeout2"
second-level connection timeout
Format:
Number of seconds.
Default:
30
"include_ldap_2level_ca.filter2"
second-level filter template
Format:
/".+"/
Default:
None, mandatory.
"include_ldap_2level_ca.attrs2"
second-level extracted attribute
Format:
/$ldap_attrdesc/
Default:
"mail"
"include_ldap_2level_ca.select2"
second-level selection
Format:
"all" - all
"first" - first entry
"regex" - entries matching regular expression
Default:
"first"
"include_ldap_2level_ca.regex2"
second-level regular expression
Format:
/".+"/
Default:
""
"include_ldap_2level_ca.email_entry"
Name of email entry
Format:
/"\S+"/
Default:
None, mandatory.
"include_ldap_2level_ca.nosync_time_ranges"
Time ranges when inclusion is not allowed
Format:
/$time_ranges/
Default:
None.
"include_ldap_2level_ca.use_ssl"
Obsoleted. Use "use_tls".
"include_sql_ca"
SQL query custom attribute
Multiple occurrences allowed
"include_sql_ca.name"
short name for this source
Format:
/".+"/
Default:
None.
"include_sql_ca.db_type"
database type
Format:
/"\S+"/
Default:
None, mandatory.
"include_sql_ca.host"
remote host
Format:
/$host/
Default:
None, mandatory.
"include_sql_ca.db_port"
database port
Format:
/"\d+"/
Default:
None.
"include_sql_ca.db_name"
database name
Format:
/"\S+"/
Default:
None, mandatory.
"include_sql_ca.connect_options"
connection options
Format:
/".+"/
Default:
None.
"include_sql_ca.db_env"
environment variables for database connection
Format:
/"\w+\=\S+(;\w+\=\S+)*"/
Default:
None.
"include_sql_ca.user"
remote user
Format:
/"\S+"/
Default:
None, mandatory.
"include_sql_ca.passwd"
remote password
Format:
The value to be concealed.
Default:
None.
"include_sql_ca.sql_query"
SQL query
Format:
/$sql_query/
Default:
None, mandatory.
"include_sql_ca.f_dir"
Directory where the database is stored (used for DBD::CSV only)
Format:
/".+"/
Default:
None.
"include_sql_ca.email_entry"
Name of email entry
Format:
/"\S+"/
Default:
None, mandatory.
"include_sql_ca.nosync_time_ranges"
Time ranges when inclusion is not allowed
Format:
/$time_ranges/
Default:
None.
"include_list"
Deprecated.
"user_data_source"
Deprecated.
DKIM
"dkim_feature"
Insert DKIM signature to messages sent to the list
Format:
"on" - enabled
"off" - disabled
Default:
Value of "dkim_feature" parameter in sympa.conf or robot.conf.
Enable/Disable DKIM. This feature require Mail::DKIM to installed and may be some custom
scenario to be updated
"dkim_parameters"
DKIM configuration
Single occurrence
A set of parameters in order to define outgoing DKIM signature
"dkim_parameters.private_key_path"
File path for list DKIM private key
Format:
/"\S+"/
Default:
Value of "dkim_private_key_path" parameter in sympa.conf or robot.conf.
The file must contain a RSA pem encoded private key
"dkim_parameters.selector"
Selector for DNS lookup of DKIM public key
Format:
/"\S+"/
Default:
Value of "dkim_selector" parameter in sympa.conf or robot.conf.
The selector is used in order to build the DNS query for public key. It is up to you to
choose the value you want but verify that you can query the public DKIM key for
<selector>._domainkey.your_domain
"dkim_parameters.header_list"
Deprecated.
"dkim_parameters.signer_domain"
DKIM "d=" tag, you should probably use the default value
Format:
/"\S+"/
Default:
Value of "dkim_signer_domain" parameter in sympa.conf or robot.conf.
The DKIM "d=" tag, is the domain of the signing entity. the list domain MUST be included
in the "d=" domain
"dkim_parameters.signer_identity"
DKIM "i=" tag, you should probably leave this parameter empty
Format:
/"\S+"/
Default:
None.
DKIM "i=" tag, you should probably not use this parameter, as recommended by RFC 4871,
default for list brodcasted messages is i=<listname>-request@<domain>
"dkim_signature_apply_on"
The categories of messages sent to the list that will be signed using DKIM.
Format:
Multiple values allowed, separated by ",".
"md5_authenticated_messages" - authenticated by password
"smime_authenticated_messages" - authenticated by S/MIME signature
"dkim_authenticated_messages" - authenticated by DKIM signature
"editor_validated_messages" - approved by editor
"none" - do nothing
"any" - any messages
Default:
Value of "dkim_signature_apply_on" parameter in sympa.conf or robot.conf.
This parameter controls in which case messages must be signed using DKIM, you may sign
every message choosing 'any' or a subset. The parameter value is a comma separated list of
keywords
"dmarc_protection"
DMARC Protection
Single occurrence
Parameters to define how to manage From address processing to avoid some domains'
excessive DMARC protection
"dmarc_protection.mode"
Protection modes
Format:
Multiple values allowed, separated by ",".
"none" - do nothing
"all" - all
"dkim_signature" - DKIM signature exists
"dmarc_reject" - DMARC policy suggests rejection
"dmarc_any" - DMARC policy exists
"dmarc_quarantine" - DMARC policy suggests quarantine
"domain_regex" - domain matching regular expression
Default:
Value of "dmarc_protection_mode" parameter in sympa.conf or robot.conf.
Select one or more operation modes. "Domain matching regular expression" (domain_regex)
matches the specified Domain regexp; "DKIM signature exists" (dkim_signature) matches any
message with a DKIM signature header; "DMARC policy ..." (dmarc_*) matches messages from
sender domains with a DMARC policy as given; "all" (all) matches all messages.
"dmarc_protection.domain_regex"
Match domain regexp
Format:
/".+"/
Default:
Value of "dmarc_protection_domain_regex" parameter in sympa.conf or robot.conf.
Regexp match pattern for From domain
"dmarc_protection.other_email"
New From address
Format:
/".+"/
Default:
Value of "dmarc_protection_other_email" parameter in sympa.conf or robot.conf.
This is the email address to use when modifying the From header. It defaults to the list
address. This is similar to Anonymisation but preserves the original sender details in
the From address phrase.
"dmarc_protection.phrase"
New From name format
Format:
"display_name" - "Name"
"name_and_email" - "Name" (e-mail)
"name_via_list" - "Name" (via List)
"name_email_via_list" - "Name" (e-mail via List)
"list_for_email" - "List" (on behalf of e-mail)
"list_for_name" - "List" (on behalf of Name)
Default:
Value of "dmarc_protection_phrase" parameter in sympa.conf or robot.conf.
This is the format to be used for the sender name part of the new From header.
Miscellaneous
"clean_delay_queuemod"
Expiration of unmoderated messages
Format:
Number of days.
Default:
Value of "clean_delay_queuemod" parameter in sympa.conf.
"cookie"
Secret string for generating unique keys
Format:
The value to be concealed.
Default:
Value of "cookie" parameter in sympa.conf.
This parameter is a confidential item for generating authentication keys for
administrative commands (ADD, DELETE, etc.). This parameter should remain concealed, even
for owners. The cookie is applied to all list owners, and is only taken into account when
the owner has the auth parameter.
"custom_attribute"
Custom user attributes
Multiple occurrences allowed
"custom_attribute.id"
internal identifier
Format:
/"\w+"/
Default:
None, mandatory.
"custom_attribute.name"
label
Format:
/".+"/
Default:
None, mandatory.
"custom_attribute.comment"
additional comment
Format:
/".+"/
Default:
None.
"custom_attribute.type"
type
Format:
"string" - string
"text" - multi-line text
"integer" - number
"enum" - set of keywords
Default:
"string"
"custom_attribute.enum_values"
possible attribute values (if enum is used)
Format:
/".+"/
Default:
None.
"custom_attribute.optional"
is the attribute optional?
Format:
"required" - required
"optional" - optional
Default:
"optional"
"custom_vars"
custom parameters
Multiple occurrences allowed
"custom_vars.name"
var name
Format:
/"\S+"/
Default:
None, mandatory.
"custom_vars.value"
var value
Format:
/".+"/
Default:
None, mandatory.
"expire_task"
Periodical subscription expiration task
Format:
/"\w+"/
Default:
None.
This parameter states which model is used to create an expire task. An expire task
regularly checks the subscription or resubscription date of subscribers and asks them to
renew their subscription. If they don't they are deleted.
"loop_prevention_regex"
Regular expression applied to prevent loops with robots
Format:
/"\S*"/
Default:
Value of "loop_prevention_regex" parameter in sympa.conf or robot.conf.
"pictures_feature"
Allow picture display? (must be enabled for the current robot)
Format:
"on" - enabled
"off" - disabled
Default:
Value of "pictures_feature" parameter in sympa.conf.
"remind_task"
Periodical subscription reminder task
Format:
/"\w+"/
Default:
Value of "default_remind_task" parameter in sympa.conf.
This parameter states which model is used to create a remind task. A remind task regularly
sends subscribers a message which reminds them of their list subscriptions.
"spam_protection"
email address protection method
Format:
"at" - replace @ characters
"javascript" - use JavaScript
"none" - do nothing
Default:
"javascript"
There is a need to protect Sympa web sites against spambots which collect email addresses
from public web sites. Various methods are available in Sympa and you can choose to use
them with the spam_protection and web_archive_spam_protection parameters. Possible value
are:
javascript:
the address is hidden using a javascript. A user who enables javascript can see a nice
mailto address where others have nothing.
at:
the @ char is replaced by the string " AT ".
none:
no protection against spammer.
"latest_instantiation"
Latest family instantiation
Single occurrence
"latest_instantiation.email"
who ran the instantiation
Format:
/"listmaster|$email"/
Default:
None.
"latest_instantiation.date_epoch"
date
Format:
The time in second from Unix epoch.
Default:
None, mandatory.
"latest_instantiation.date"
Deprecated.
"creation"
Creation of the list
Single occurrence
"creation.email"
who created the list
Format:
/"listmaster|$email"/
Default:
None, mandatory.
"creation.date_epoch"
date
Format:
The time in second from Unix epoch.
Default:
None, mandatory.
"creation.date"
Deprecated.
"update"
Last update of config
Single occurrence
"update.email"
who updated the config
Format:
/"(listmaster|automatic|$email)"/
Default:
None.
"update.date_epoch"
date
Format:
The time in second from Unix epoch.
Default:
None, mandatory.
"update.date"
Deprecated.
"status"
Status of the list
Format:
Status of list.
Default:
"open"
"serial"
Serial number of the config
Format:
/"\d+"/
Default:
0
"account"
Deprecated.
FILES
$EXPLDIR/<list name>/config or $EXPLDIR/<mail domain name>/<list name>/config
List main configuration file.
SEE ALSO
sympa.conf(5).
Sympa, Mailing List Management Software - Reference Manual.
<http://www.sympa.org/manual/>.