bionic (5) vboxgetty.conf.5.gz

Provided by: isdnvboxserver_3.25+dfsg1-9ubuntu2_amd64 bug

NAME

       vboxgetty.conf - config file for vboxgetty

Description

       The  file  /etc/isdn/vboxgetty.conf is used to configure vboxgetty. Please read the man page vboxgetty(8)
       for a description of how vboxgetty works.

       Everything after "#" is ignored, as are empty lines.  All  arguments  must  be  separated  by  whitespace
       (spaces, tabs). Arguments may not contain whitespace.

       All settings before the first port command are global settings, after a port command they only affect the
       current port.

       port <string>
              ISDN device to configure.

       modeminit <string>
              Command to initialize the modem. You should set the MSN/EAZ on which vboxgetty should  listen  for
              incoming calls. Default is "ATZ".

       user <string>
              Name  of  the  user  that vboxgetty will use. This user must exist in /etc/passwd and you must use
              this parameter.

       group <string>
              Name of the group that vboxgetty will use. This group must exist in /etc/group and  you  must  use
              this parameter.

       umask <number>
              Vboxgetty will use this umask when creating new files. You must give the umask as an octal number.
              Default is 077.

       dropdtrtime <seconds>
              Number of milliseconds to hold the DTR-Line low to reset the modem.  Default value is 800.

       initpause <number>
              Number of milliseconds to wait after initializing the modem. This is used to compensate the  delay
              of the "NO CARRIER" response. Default value is 1500.

       badinitsexit <number>
              Maximum failures with modeminit. If this number is reached, vboxgetty exits. Default is 0.

       ringtimeout <number>
              Time  in  seconds  to  wait for a RING. If no RING is received within this time, no call is taken.
              Default is 5.

       echotimeout <number>
              Time in seconds to wait for the echo from the modem. Default is 4.

       commandtimeout <number>
              Time in seconds to wait for a response to a modem command. Default is 4.

       alivetimeout <number>
              After this time in seconds vboxgetty will  check  if  the  modem  is  still  responding  to  modem
              commands. Default is 1800.

       compression <string>
              Audio compression to use to record new messages. Possible values are ADPCM-2, ADPCM-3, ADPCM-4 and
              ULAW. The ALAW compression mode is no longer supported. Default is ULAW.

       spooldir <string>
              Spool directory to use. This directory  must  exist.  It's  used  for  control  files  of  several
              programs. Default is /var/spool/vbox/<user>.

       vboxconfig <string>
              Full path of the vbox config file. Default value is <spooldir>/vbox.conf.

       freespace <number>
              Number  of  bytes that must be available on the partition with the spool directory, so that a call
              may be taken. Default is 0.

       debuglevel <string>
              What messages are be written to  /var/log/vbox/vboxgetty-<device>.log.   The  string  consists  of
              letters  representing  the severities of the messages to log (F=FATAL, E=ERROR, W=WARNING, I=INFO,
              D=DEBUG, J=JUNK).  Default is FEWI.

FILES

       /etc/isdn/vboxgetty.conf
              this configuration file

SEE ALSO

       vboxgetty(8), vbox(5), vboxtcl(5)

AUTHOR

       This manual page was written by  Andreas  Jellinghaus  <aj@dungeon.inka.de>,  for  Debian  GNU/Linux  and
       isdn4linux.