Ubuntu Manpage: live-config - System Configuration Components

Provided by: open-infrastructure-system-config_20161101-lts1-2_all

NAME

       live-config - System Configuration Components

DESCRIPTION

       live-config  contains  the components that configure a live system during the boot process
       (late userspace).

CONFIGURATION

live-config can be configured through boot parameters or configuration files. If both
mechanisms are used for a certain option, the boot parameters take precedence over the
configuration files. When using persistency, live-config components are only run once.

If live-build(7) is used to build the live system, the live-config parameters used by
default can be set through the --bootappend-live option, see lb_config(1) manual page.

Boot Parameters (components)
live-config is only activated if 'boot=live' is used as a boot parameter. Additionally,
live-config needs to be told which components to run through the 'live-config.components'
parameter or which components to not run through the 'live-config.nocomponents' parameter.
If both 'live-config.components' and 'live-config.nocomponents' are used, or, if either
one is specified multiple times, always the later one takes precedence over the previous
one(s).

live-config.components | components
All components are run. This is what live images use by default.

live-config.components=COMPONENT1,COMPONENT2, ... COMPONENTn |
components=COMPONENT1,COMPONENT2, ... COMPONENTn
Only the specified components are run. Note that the order matters, e.g.
'live-config.components=sudo,user-setup' would not work since the user needs to be
added before it can be configured for sudo. Look at the filenames of the components in
/lib/live/config for their ordering number.

live-config.nocomponents | nocomponents
No component is run. This is the same as not using any of 'live-config.components' or
'live-config.nocomponents'.

live-config.nocomponents=COMPONENT1,COMPONENT2, ... COMPONENTn |
nocomponents=COMPONENT1,COMPONENT2, ... COMPONENTn
All components are run, except the specified ones.

Boot Parameters (options)
Some individual components can change their behaviour upon a boot parameter.

live-config.debconf-preseed=filesystem|medium|URL1|URL2| ... |URLn |
debconf-preseed=medium|filesystem|URL1|URL2| ... |URLn
Allows to fetch and apply one or more debconf preseed files to be applied to the
debconf database. Note that the URLs must be fetchable by wget (http, ftp or file://).
If the file is placed on the live medium, it can be fetched with
file:///lib/live/mount/medium/FILE, or with file:///FILE if it is in the root
filesystem of the live system itself.
All preseed files in /lib/live/config-preseed/ in the root filesystem of the live
system can be automatically enabled with the keyword 'filesystem'.
All preseed files in /live/config-preseed/ of the live medium can be automatically
enabled with the keyword 'medium'.
If several mechanisms are combined, then filesystem preseed files are applied first,
then medium preseed files, and last the network preseed files.

live-config.hostname=HOSTNAME | hostname=HOSTNAME
Allows to set the hostname of the system. The default is 'debian'.

live-config.username=USERNAME | username=USERNAME
Allows to set the username that gets created for autologin. The default is 'user'.

live-config.user-default-groups=GROUP1,GROUP2 ... GROUPn |
user-default-groups=GROUP1,GROUP2 ... GROUPn
Allows to set the default groups of the users that gets created for autologin is
member of. The default is 'audio cdrom dip floppy video plugdev netdev powerdev
scanner bluetooth'.

live-config.user-fullname="USER FULLNAME" | user-fullname="USER FULLNAME"
Allows to set the fullname of the users that gets created for autologin. On Debian the
default is 'Debian Live user'.

live-config.locales=LOCALE1,LOCALE2 ... LOCALEn | locales=LOCALE1,LOCALE2 ... LOCALEn
Allows to set the locale of the system, e.g. 'de_CH.UTF-8'. The default is
'en_US.UTF-8'. In case the selected locale is not already available on the system, it
is automatically generated on the fly.

live-config.timezone=TIMEZONE | timezone=TIMEZONE
Allows to set the timezone of the system, e.g. 'Europe/Zurich'. The default is 'UTC'.

live-config.keyboard-model=KEYBOARD_MODEL | keyboard-model=KEYBOARD_MODEL
Allows to change the keyboard model. There is no default value set.

live-config.keyboard-layouts=KEYBOARD_LAYOUT1,KEYBOARD_LAYOUT2 ... KEYBOARD_LAYOUTn |
keyboard-layouts=KEYBOARD_LAYOUT1,KEYBOARD_LAYOUT2 ... KEYBOARD_LAYOUTn
Allows to change the keyboard layouts. If more than one is specified, the tools of the
desktop environment will allow to switch it under X11. There is no default value set.

live-config.keyboard-variants=KEYBOARD_VARIANT1,KEYBOARD_VARIANT2 ... KEYBOARD_VARIANTn |
keyboard-variants=KEYBOARD_VARIANT1,KEYBOARD_VARIANT2 ... KEYBOARD_VARIANTn
Allows to change the keyboard variants. If more than one is specified, the same number
of values as keyboard-layouts values should be specified as they will be matched
one-to-one in the order specified. Blank values are allowed. The tools of the desktop
environment will allow to switch between each layout and variant pair under X11. There
is no default value set.

live-config.keyboard-options=KEYBOARD_OPTIONS | keyboard-options=KEYBOARD_OPTIONS
Allows to change the keyboard options. There is no default value set.

live-config.sysv-rc=SERVICE1,SERVICE2 ... SERVICEn | sysv-rc=SERVICE1,SERVICE2 ...
SERVICEn
Allows to disable sysv services through update-rc.d.

live-config.utc=yes|no | utc=yes|no
Allows to change if the system is assuming that the hardware clock is set to UTC or
not. The default is 'yes'.

live-config.x-session-manager=X_SESSION_MANAGER | x-session-manager=X_SESSION_MANAGER
Allows to set the x-session-manager through update-alternatives.

live-config.xorg-driver=XORG_DRIVER | xorg-driver=XORG_DRIVER
Allows to set xorg driver instead of autodetecting it. If a PCI ID is specified in
/usr/share/live/config/xserver-xorg/DRIVER.ids within the live system, the DRIVER is
enforced for these devices. If both a boot parameter and an override are found, the
boot parameter takes precedence.

live-config.xorg-resolution=XORG_RESOLUTION | xorg-resolution=XORG_RESOLUTION
Allows to set xorg resolution instead of autodetecting it, e.g. 1024x768.

live-config.wlan-driver=WLAN_DRIVER | wlan-driver=WLAN_DRIVER
Allows to set WLAN driver instead of autodetecting it. If a PCI ID is specified in
/usr/share/live/config/broadcom-sta/DRIVER.ids within the live system, the DRIVER is
enforced for these devices. If both a boot parameter and an override are found, the
boot parameter takes precedence.

live-config.hooks=filesystem|medium|URL1|URL2| ... |URLn |
hooks=medium|filesystem|URL1|URL2| ... |URLn
Allows to fetch and execute one or more arbitrary files. Note that the URLs must be
fetchable by wget (http, ftp or file://), the files are executed in /tmp of the
running live system, and that the files needs their dependencies, if any, already
installed, e.g. if a python script should be executed the system needs python
installed. Some hooks for some common use-cases are available at /usr/share/doc/live-
config/examples/hooks/ and <http://live-systems.org/other/hooks>.
If the file is placed on the live medium, it can be fetched with
file:///lib/live/mount/medium/FILE, or with file:///FILE if it is in the root
filesystem of the live system itself.
All hooks in /lib/live/config-hooks/ in the root filesystem of the live system can be
automatically enabled with the keyword 'filesystem'.
All hooks in /live/config-hooks/ of the live medium can be automatically enabled with
the keyword 'medium'.
If several mechanisms are combined, then filesystem hooks are executed first, then
medium hooks, and last the network hooks.

Boot Parameters (shortcuts)
For some common use cases where it would require to combine several individual parameters,
live-config provides shortcuts. This allows both to have full granularity over all the
options, as well keep things simple.

live-config.noroot | noroot
Disables sudo and policykit, the user cannot gain root privileges on the system.

live-config.noautologin | noautologin
Disables both the automatic console login and the graphical autologin.

live-config.nottyautologin | nottyautologin
Disables the automatic login on the console, not affecting the graphical autologin.

live-config.nox11autologin | nox11autologin
Disables the automatic login with any display manager, not affecting tty autologin.

Boot Parameters (special options)
For special use cases there are some special boot paramters.

live-config.debug | debug
Enables debug output in live-config.

Configuration Files
live-config can be configured (but not activated) through configuration files. Everything
but the shortcuts that can be configured with a boot parameter can also alternatively be
configured through one or more files. If configuration files are used, the 'boot=live'
parameter is still required to activate live-config.

Note: If configuration files are used, either (preferably) all boot parameters should be
put into the LIVE_CONFIG_CMDLINE variable, or individual variables can be set. If
individual variables are used, the user is required to ensure that all the necessary
variables are set to create a valid configuration.

Configuration files can be placed either in the root filesystem itself
(/etc/live/config.conf, /etc/live/config.conf.d/*.conf), or on the live media
(live/config.conf, live/config.conf.d/*.conf). If both places are used for a certain
option, the ones from the live media take precedence over the ones from the root
filesystem.

Although the configuration files placed in the configuration directories do not require a
particular name, it is suggested for consistency reasons to either use 'vendor.conf' or
'project.conf' as a naming scheme (whereas 'vendor' or 'project' is replaced with the
actual name, resulting in a filename like 'progress-linux.conf').

The actual content of the configuration files consists of one or more of the following
variables.

LIVE_CONFIG_CMDLINE=PARAMETER1 PARAMETER2 ... PARAMETERn
This variable corresponds to the bootloader command line.

LIVE_CONFIG_COMPONENTS=COMPONENT1,COMPONENT2, ... COMPONENTn
This variable corresponds to the 'live-config.components=COMPONENT1,COMPONENT2, ...
COMPONENTn' parameter.

LIVE_CONFIG_NOCOMPONENTS=COMPONENT1,COMPONENT2, ... COMPONENTn
This variable corresponds to the 'live-config.nocomponents=COMPONENT1,COMPONENT2, ...
COMPONENTn' parameter.

LIVE_DEBCONF_PRESEED=filesystem|medium|URL1|URL2| ... |URLn
This variable corresponds to the
'live-config.debconf-preseed=filesystem|medium|URL1|URL2| ... |URLn' parameter.

LIVE_HOSTNAME=HOSTNAME
This variable corresponds to the 'live-config.hostname=HOSTNAME' parameter.

LIVE_USERNAME=USERNAME
This variable corresponds to the 'live-config.username=USERNAME' parameter.

LIVE_USER_DEFAULT_GROUPS=GROUP1,GROUP2 ... GROUPn
This variable corresponds to the 'live-config.user-default-groups="GROUP1,GROUP2 ...
GROUPn"' parameter.

LIVE_USER_FULLNAME="USER FULLNAME"
This variable corresponds to the 'live-config.user-fullname="USER FULLNAME"'
parameter.

LIVE_LOCALES=LOCALE1,LOCALE2 ... LOCALEn
This variable corresponds to the 'live-config.locales=LOCALE1,LOCALE2 ... LOCALEn'
parameter.

LIVE_TIMEZONE=TIMEZONE
This variable corresponds to the 'live-config.timezone=TIMEZONE' parameter.

LIVE_KEYBOARD_MODEL=KEYBOARD_MODEL
This variable corresponds to the 'live-config.keyboard-model=KEYBOARD_MODEL'
parameter.

LIVE_KEYBOARD_LAYOUTS=KEYBOARD_LAYOUT1,KEYBOARD_LAYOUT2 ... KEYBOARD_LAYOUTn
This variable corresponds to the
'live-config.keyboard-layouts=KEYBOARD_LAYOUT1,KEYBOARD_LAYOUT2 ... KEYBOARD_LAYOUTn'
parameter.

LIVE_KEYBOARD_VARIANTS=KEYBOARD_VARIANT1,KEYBOARD_VARIANT2 ... KEYBOARD_VARIANTn
This variable corresponds to the
'live-config.keyboard-variants=KEYBOARD_VARIANT1,KEYBOARD_VARIANT2 ...
KEYBOARD_VARIANTn' parameter.

LIVE_KEYBOARD_OPTIONS=KEYBOARD_OPTIONS
This variable corresponds to the 'live-config.keyboard-options=KEYBOARD_OPTIONS'
parameter.

LIVE_SYSV_RC=SERVICE1,SERVICE2 ... SERVICEn
This variable corresponds to the 'live-config.sysv-rc=SERVICE1,SERVICE2 ... SERVICEn'
parameter.

LIVE_UTC=yes|no
This variable corresponds to the 'live-config.utc=yes|no' parameter.

LIVE_X_SESSION_MANAGER=X_SESSION_MANAGER
This variable corresponds to the 'live-config.x-session-manager=X_SESSION_MANAGER'
parameter.

LIVE_XORG_DRIVER=XORG_DRIVER
This variable corresponds to the 'live-config.xorg-driver=XORG_DRIVER' parameter.

LIVE_XORG_RESOLUTION=XORG_RESOLUTION
This variable corresponds to the 'live-config.xorg-resolution=XORG_RESOLUTION'
parameter.

LIVE_WLAN_DRIVER=WLAN_DRIVER
This variable corresponds to the 'live-config.wlan-driver=WLAN_DRIVER' parameter.

LIVE_HOOKS=filesystem|medium|URL1|URL2| ... |URLn
This variable corresponds to the 'live-config.hooks=filesystem|medium|URL1|URL2| ...
|URLn' parameter.

LIVE_CONFIG_DEBUG=true|false
This variable corresponds to the 'live-config.debug' parameter.

CUSTOMIZATION

       live-config can be easily customized for downstream projects or local usage.

   Adding new config components
       Downstream  projects  can put their components into /lib/live/config and do not need to do
       anything else, the components will be called automatically during boot.

       The components are best put into an own debian package. A  sample  package  containing  an
       example component can be found in /usr/share/doc/live-config/examples.

   Removing existing config components
       It  is not really possible to remove components itself in a sane way yet without requiring
       either to ship a locally modified live-config package or using dpkg-divert.  However,  the
       same   can   be   achieved   by   disabling   the   respective   components   through  the
       live-config.nocomponents mechanism, see above. To avoid to always need specifing  disabled
       components through the boot parameter, a configuration file should be used, see above.

       The  configuration  files  for  the  live  system  itself  are best put into an own debian
       package.  A  sample  package  containing  an  example  configuration  can  be   found   in
       /usr/share/doc/live-config/examples.

COMPONENTS

live-config currently features the following components in /lib/live/config.

debconf
allows to apply arbitrary preseed files placed on the live media or an http/ftp
server.

hostname
configures /etc/hostname and /etc/hosts.

user-setup
adds a live user account.

sudo
grants sudo privileges to the live user.

locales
configures locales.

locales-all
configures locales-all.

tzdata
configures /etc/timezone.

gdm3
configures autologin in gdm3.

kdm configures autologin in kdm.

lightdm
configures autologin in lightdm.

lxdm
configures autologin in lxdm.

nodm
configures autologin in nodm.

slim
configures autologin in slim.

xinit
configures autologin with xinit.

keyboard-configuration
configures the keyboard.

systemd
configures systemd autologin.

sysvinit
configures sysvinit.

sysv-rc
configures sysv-rc by disabling listed services.

apport
disables apport.

gnome-panel-data
disables lock button for the screen.

gnome-power-manager
disables hibernation.

gnome-screensaver
disables the screensaver locking the screen.

kaboom
disables KDE migration wizard (squeeze and newer).

kde-services
disables some unwanted KDE services (squeeze and newer).

policykit
grant user privilegies through policykit.

ssl-cert
regenerating ssl snake-oil certificates.

anacron
disables anacron.

util-linux
disables util-linux' hwclock.

xserver-xorg
configures xserver-xorg.

broadcom-sta
configures broadcom-sta WLAN drivers.

openssh-server
recreates openssh-server host keys.

xfce4-panel
configures xfce4-panel to default settings.

xscreensaver
disables the screensaver locking the screen.

hooks
allows to run arbitrary commands from a file placed on the live media or an http/ftp
server.

FILES

       /etc/live/config.conf

       /etc/live/config.conf.d/*.conf

       live/config.conf

       live/config.conf.d/*.conf

       /lib/live/config.sh

       /lib/live/config/

       /var/lib/live/config/

       /var/log/live/config.log

       /live/config-hooks/*

       live/config-hooks/*

       /live/config-preseed/*

       live/config-preseed/*

HOMEPAGE

       More  information  about  live-config  and  the  Live  Systems project can be found on the
       homepage   at   <http://live-systems.org/>   and   in   the   manual   at    <http://live-
       systems.org/manual/>.

BUGS

       Bugs  can  be  reported  by  submitting a bugreport for the live-config package in the Bug
       Tracking System at <http://bugs.debian.org/> or by writing a  mail  to  the  Live  Systems
       mailing list at <debian-live@lists.debian.org>.

AUTHOR

       live-config was written by Daniel Baumann <mail@daniel-baumann.ch>.