Provided by: cpl-plugin-uves-doc_5.8.2+dfsg-1_all 
NAME
uves_cal_mkmaster - Creates the master bias/dark/flat frame
SYNOPSIS
esorex uves_cal_mkmaster [OPTIONS] FILE.sof
DESCRIPTION
This recipe calls uves_cal_mbias if any raw BIAS frame is provided otherwise
uves_cal_mdark if any raw DARK frame is provided, otherwise it calls uves_cal_mflat Pls
refer to those recipes for more details
OPTIONS
--stack_method <str>
Method used to build master frame (str; default: ´median´). The full name of this
option for the EsoRex configuration file is uves_cal_mkmaster.stack_method [default
= median].
--klow <float>
Kappa used to clip low level values, when method is set to ´mean´ (float; default:
5.0). The full name of this option for the EsoRex configuration file is
uves_cal_mkmaster.klow [default = 5.0].
--khigh <float>
Kappa used to clip high level values, when method is set to ´mean´ (float; default:
5.0). The full name of this option for the EsoRex configuration file is
uves_cal_mkmaster.khigh [default = 5.0].
--niter <long>
Number of kappa sigma iterations, when method is set to ´mean´ (long; default: 5).
The full name of this option for the EsoRex configuration file is
uves_cal_mkmaster.niter [default = 5].
--debug <bool>
Whether or not to save intermediate results to local directory (bool; default:
False). The full name of this option for the EsoRex configuration file is
uves.debug [default = False].
--plotter <str>
Any plots produced by the recipe are redirected to the command specified by this
parameter. The plotting command must contain the substring ´gnuplot´ and must be
able to parse gnuplot syntax on its standard input. Valid examples of such a
command may include ´gnuplot -persist´ and ´cat > mygnuplot$$.gp´. A finer control
of the plotting options can be obtained by writing an executable script, e.g.
my_gnuplot.pl, that executes gnuplot after setting the desired gnuplot options
(e.g. set terminal pslatex color). To turn off plotting, set this parameter to ´no´
(str; default: ´no´). The full name of this option for the EsoRex configuration
file is uves.plotter [default = no].
--process_chip <str>
For RED arm data process the redl, redu, or both chip(s) (str; default: ´both´).
The full name of this option for the EsoRex configuration file is uves.process_chip
[default = both].
--stack_method <str>
Method used to build master frame (str; default: ´median´). The full name of this
option for the EsoRex configuration file is uves_cal_mkmaster.stack_method [default
= median].
--klow <float>
Kappa used to clip low level values, when method is set to ´mean´ (float; default:
5.0). The full name of this option for the EsoRex configuration file is
uves_cal_mkmaster.klow [default = 5.0].
--khigh <float>
Kappa used to clip high level values, when method is set to ´mean´ (float; default:
5.0). The full name of this option for the EsoRex configuration file is
uves_cal_mkmaster.khigh [default = 5.0].
--niter <long>
Number of kappa sigma iterations, when method is set to ´mean´ (long; default: 5).
The full name of this option for the EsoRex configuration file is
uves_cal_mkmaster.niter [default = 5].
--debug <bool>
Whether or not to save intermediate results to local directory (bool; default:
False). The full name of this option for the EsoRex configuration file is
uves.debug [default = False].
--plotter <str>
Any plots produced by the recipe are redirected to the command specified by this
parameter. The plotting command must contain the substring ´gnuplot´ and must be
able to parse gnuplot syntax on its standard input. Valid examples of such a
command may include ´gnuplot -persist´ and ´cat > mygnuplot$$.gp´. A finer control
of the plotting options can be obtained by writing an executable script, e.g.
my_gnuplot.pl, that executes gnuplot after setting the desired gnuplot options
(e.g. set terminal pslatex color). To turn off plotting, set this parameter to ´no´
(str; default: ´no´). The full name of this option for the EsoRex configuration
file is uves.plotter [default = no].
--process_chip <str>
For RED arm data process the redl, redu, or both chip(s) (str; default: ´both´).
The full name of this option for the EsoRex configuration file is uves.process_chip
[default = both].
--clean_traps <bool>
Clean detector traps. If TRUE detector traps are interpolated.The bad pixels are
replaced by the average of thenearest good pixels in the same column, or simply
marked as bad. The positions of bad pixels are hard-coded (as function of UVES
chip). (bool; default: False). The full name of this option for the EsoRex
configuration file is uves_cal_mkmaster.clean_traps [default = False].
--norm_method <str>
Method used to build master frame (str; default: ´explevel´). The full name of
this option for the EsoRex configuration file is uves_cal_mkmaster.norm_method
[default = explevel].
--qc_dark.reg.num_x <long>
Number of regions along the X axis (where mean/med/rms are computed). (long;
default: 4). The full name of this option for the EsoRex configuration file is
uves_cal_mkmaster.qc_dark.reg.num_x [default = 4].
--qc_dark.reg.num_y <long>
Number of regions along the Y axis(where mean/med/rms are computed). (long;
default: 4). The full name of this option for the EsoRex configuration file is
uves_cal_mkmaster.qc_dark.reg.num_y [default = 4].
--qc_dark.reg.box_sx <long>
Region X size [pix] (long; default: 100). The full name of this option for the
EsoRex configuration file is uves_cal_mkmaster.qc_dark.reg.box_sx [default = 100].
--qc_dark.reg.box_sy <long>
Region Y size [pix] (long; default: 100). The full name of this option for the
EsoRex configuration file is uves_cal_mkmaster.qc_dark.reg.box_sy [default = 100].
--qc_dark.reg.border_x <long>
X distance between the left hand side of the detector and the left hand side of the
region [pix] (long; default: 100). The full name of this option for the EsoRex
configuration file is uves_cal_mkmaster.qc_dark.reg.border_x [default = 100].
--qc_dark.reg.border_y <long>
X distance between the left hand side of the detector and the left hand side of the
region [pix] (long; default: 100). The full name of this option for the EsoRex
configuration file is uves_cal_mkmaster.qc_dark.reg.border_y [default = 100].
--qc_dark.reg.when <long>
When QC analysis is performed. 0: on each raw frame or 1: on the master frame
(long; default: 0). The full name of this option for the EsoRex configuration file
is uves_cal_mkmaster.qc_dark.reg.when [default = 0].
--backsub.mmethod <str>
Background measuring method. If equal to ´median´ the background is sampled using
the median of a subwindow. If ´minimum´, the subwindow minimum value is used. If
´no´, no background subtraction is done. (str; default: ´median´). The full name
of this option for the EsoRex configuration file is
uves_cal_mkmaster.backsub.mmethod [default = median].
--backsub.npoints <long>
This is the number of columns in interorder space used to sample the background.
(long; default: 82). The full name of this option for the EsoRex configuration file
is uves_cal_mkmaster.backsub.npoints [default = 82].
--backsub.radiusy <long>
The height (in pixels) of the background sampling window is (2*radiusy + 1). This
parameter is not corrected for binning. (long; default: 2). The full name of this
option for the EsoRex configuration file is uves_cal_mkmaster.backsub.radiusy
[default = 2].
--backsub.sdegree <long>
Degree of interpolating splines. Currently only degree = 1 is supported (long;
default: 1). The full name of this option for the EsoRex configuration file is
uves_cal_mkmaster.backsub.sdegree [default = 1].
--backsub.smoothx <float>
If spline interpolation is used to measure the background, the x-radius of the
post-smoothing window is (smoothx * image_width). Here, ´image_width´ is the image
width after binning. If negative, the default values are used: (25.0/4096) for blue
flat-field frames, (50.0/4096) for red flat-field frames, (300.0/4096) for blue
science frames and (300.0/4096) for red science frames. (float; default: -1.0). The
full name of this option for the EsoRex configuration file is
uves_cal_mkmaster.backsub.smoothx [default = -1.0].
--backsub.smoothy <float>
If spline interpolation is used to measure the background, the y-radius of the
post-smoothing window is (smoothy * image_height). Here, ´image_height´ is the
image height after binning. If negative, the default values are used: (100.0/2048)
for blue flat-field frames, (300.0/2048) for red flat-field frames, (200.0/2048)
for blue science frames and (500.0/2048) for red science frames. (float; default:
-1.0). The full name of this option for the EsoRex configuration file is
uves_cal_mkmaster.backsub.smoothy [default = -1.0].
Note that it is possible to create a configuration file containing these options, along
with suitable default values. Please refer to the details provided by the 'esorex --help'
command.
SEE ALSO
The full documentation for the uves pipeline can be downloaded as a PDF file using the
following URL:
ftp://ftp.eso.org/pub/dfs/pipelines/uves/uves-pipeline-manual-5.8.2.pdf
An overview over the existing ESO pipelines can be found on the web page
http://www.eso.org/sci/software/pipelines/.
Basic documentation about the EsoRex program can be found at the esorex (1) man page.
It is possible to call the pipelines from python using the python-cpl package. See
http://packages.python.org/python-cpl/index.html for further information.
The other recipes of the uves pipeline are flames_cal_mkmaster(7), flames_cal_orderpos(7),
flames_cal_predict(7), flames_cal_prep_sff_ofpos(7), flames_cal_wavecal(7),
flames_obs_redchain(7), flames_obs_scired(7), flames_utl_unpack(7), uves_cal_cd_align(7),
uves_cal_mbias(7), uves_cal_mdark(7), uves_cal_mflat(7), uves_cal_mflat_combine(7),
uves_cal_orderpos(7), uves_cal_predict(7), uves_cal_response(7), uves_cal_tflat(7),
uves_cal_wavecal(7), uves_obs_redchain(7), uves_obs_scired(7), uves_utl_ima_arith(7),
uves_utl_remove_crh_single(7)
VERSION
uves_cal_mkmaster 5.8.2
AUTHOR
Jonas M. Larsen <cpl@eso.org>
BUG REPORTS
Please report any problems to cpl@eso.org. Alternatively, you may send a report to the ESO
User Support Department <usd-help@eso.org>.
LICENSE
This file is part of the FLAMES/UVES Pipeline Copyright (C) 2004, 2005, 2006, 2007
European Southern Observatory
This program is free software; you can redistribute it and/or modify it under the terms of
the GNU General Public License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program;
if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
MA 02111-1307 USA