Provided by: yodl_4.02.00-2_amd64 
NAME
yodlmacros - Macros for the Yodl converters
SYNOPSIS
This manual page lists the standard macros of the Yodl package.
DESCRIPTION
The following list shows the macros defined by the Yodl converters define and which can be
used in Yodl documents. Refer to the Yodl user guide, distributed with the Yodl package,
for a full description.
The following list shows all macros of the package in alphabetical order.
`abstract(text)’
Defines an abstract for an article or report type of document. Abstracts are not
implemented for books or manpages. Must appear before starting the document using
the `article’ or `report’ macro.
`addntosymbol(symbol)(n)(text)’
Adds `text’ `n’ times to `symbol’. The value `n’ may also be the name of a defined
counter (which is not modified).
`affiliation(site)’
Defines an affiliation, to appear in the document titlepage below the author field.
Must appear before starting the document with `article’, `report’ or `book’. The
affiliation is only printed when the author field is not empty. When converting to
html the way the affiliation is displayed can be tuned using CSS id selector
specifications. The affiliation has `id="affiliation"’.
`AfourEnlarged()’
Enlarges the usable height of A4 paper by 2 cm.: the top margin is reduced by 2 cm.
This macro should be called in the preamble. The macro is available only for LaTeX
conversions.
`appendix()’
Starts appendices
`article(title)(author)(date)’
Starts an article. The top-level sectioning command is `(n)sect’. In HTML
conversions only one output file is written, while the way the headings are
displayed can be tuned using CSS id selector specifications: the title has
`id="title"’, the author `id="author"’, and the date `id="date"’.)
`attrib(text)’
In html, pushes `text’ as an attribute for the next html tag supporting `attrib’.
E.g, to set a blue color and 30 pixel left-hand side margin for a section use
attrib(style="color:blue;margin-left:30px;")\
sect(Section name)
This results in the html markup
<h1 style="color:blue;margin-left:30px;">Section name</h1>
This macro is only effective with html conversions. It is applied in a stack-wise
fasion: when multiple `attrib’ calls are used, then the topmost attrib-string is
added to the first macro calling the `attribinsert’ macro, with subsequent macros
using subsequent elements on the attrib-stack.
Commonly used attributes are `id="idname"’, expecting a `#idname’ CSS label in
either internal or external CSS specifications, or `style="spec"’ (as shown in the
example).
Example: when using
attrib(width = "100" height = "100")
attrib(id = "#fig")
figure(imgfile)(Caption)(IMG)
then the `#id’ attribute is applied to `<figure>’, and the `width’ and `height’
attributes are applied to `<img>’, which html markup is inserted by the `figure’
macro.
The `attrib’ macro is supported by the following predefined macros (between
parentheses the number of attribute strings that are inserted by these macros; if
only 1 attribute string is inserted no number is shown):
`bf cell cells center chapter code dashes dit em figure(3) file htmltag itdesc
lchapter link lref lsect lsubsect lsubsubsect nchapter npart nsect nsubsect
nsubsubsect paragraph part quote row sc sect strong subs subsect subsubsect
subsubsubsect sups tableatt tbl tac tc tnac tnc tr tt ttbegin url verb verborg
verbinclude’.
`attribclear()’
Removes any existing contents from the attrib-stack. This macro is only active when
converting to html
`attribinsert()’
In html, if the attrib-stack is not empty, inserts the value on top of the
attrib-stack and then pops the topmost value. If the attrib-stack is empty,
nothing happens.
`bf(text)’
Sets `text’ in boldface.
`bind(text)’
Generate a binding character (non-breaking space) after text.
`book(title)(author)(date)’
Starts a book document. The top-level sectioning command is `(n)chapter’, `(n)part’
being optional. In HTML output files are created for each chapter, while the way
the headings are displayed can be tuned using CSS id selector specifications: the
title has `id="title"’, the author `id="author"’, and the date `id="date"’.)
`cell(contents)’
Sets a table cell, i.e., one element in a row. With the man/ms converters multiple
blanks between `cell()’ macro calls are merged into a single blank character.
Instead of using `cell’ in `table’, consider using `tc’ in `tbl’.
`cells(nColumns)(contents)’
Set a table cell over `nColumns’ columns. With LaTeX and xml the information in the
combined cells is centered.
With man/ms conversions the `cells()’ macro simply calls the `cell()’ macro, but
here the `setmanalign()’ macro can be used to determine the alignment of multiple
cells.
With html the macro `attrib’ can be used, but when it contains a `style’
specification the macro’s default `style="text-align: center"’ is ignored (but it
can optionally be specified using the `attrib’ macro).
Instead of using `cells’ in `table’, consider using `tnc’ in `tbl’.
`cellsline(from)(count)’
Sets a horizontal line starting at column number `from’ over `count’ columns in a
row. If `from’ is less then the number of columns already added to a row then it is
ignored. This macro must be embedded in a `row’ macro defining a table row. To put
a line across the table’s full width use `rowline’. To set horizontal lines across
columns 1 until 2 and columns 4 until 5 table of a table use:
row(cellsline(1)(2)cellsline(4)(2))
Combining `cellsline’ and `cell’ or `cells’ calls in one row produces undefined
results.
Instead of using `cellsline’ in `table’, consider using `tline’ in `tbl’.
`center(text)’
Centers `text’. Use `nl()’ in the text to break lines. In html the `attrib’ macro
is not supported, but a division (`div’) with style definition `text-align: center’
is used. To center a table in html use the `tableatt’ macro. If a `table’ or
`tableatt’ macro is used inside a `center’ macro then the contents of columns are
column-wise centered.
Inside a `center(...)’ context the counter `XXcenter’ is unequal 0.
`chapter(title)’
Starts a new chapter in books or reports.
`cindex()’
Generate an index entry for LaTex() or texinfo c-indices. Its argument is the index
entry. See also the `[fptv]index’ macro.
`cite(text)’
Sets `text’ as a citation or quotation
`clearpage()’
Starts a new page, when the output format permits. Under HTML a horizontal line is
drawn.
`code(text)’
Sets `text’ in code font, and prevents it from being expanded. For unbalanced
parameter lists, use `CHAR(40)’ to get `(’ and `CHAR(41)’ to get `)’.
`columnline(from)(through)’
Sets a horizontal line over some columns in a row. Note that `columnline’ defines a
row by itself, consisting of just a horizontal line spanning some of its columns,
rather than the table’s full width, like `rowline’. The two arguments represent
column numbers. It is the responsibility of the author to make sure that the `from’
and `through’ values are sensible. I.e.,
1 <= from <= through <= ncolumns
To set a horizontal line in just one column select `through’ equal to `from’.
Note: this macro cannot be used if multiple lines must be set in one row. In those
cases the macros `tline, tskip’, and `tendline’ should be used.
Instead of using `columnline’ in `table’, consider using `tline’ in `tbl’.
`dashes()’
Inserts two dashes in teletype font, and prevents them from being expanded.
In html the `attrib’ macro is recognized by the `<code>’ tag that is used to embed
the two dashes.
`def(macroname)(nrofargs)(redefinition)’
Defines `macroname’ as a macro, having `nrofargs’ arguments, and expanding to
`redefinition’. This macro is a shorthand for `DEFINEMACRO’. An error occurs when
the macro is already defined. Use `redef()’ to unconditionally define or redefine a
macro.
`description(list)’
Sets `list’ as a description list. Use `dit(item)’ to indicate items in the list.
`dit(itemname)’
Starts an item named `itemname’ in a description list. The list should be used in
`description’ macros. With `html’ conversions the contents of a description item is
separated from the item itself. The `dit’ macro only defines the item, and not the
description itself. This macro sets the item in bold-face (`strong’ font). The
macro `itdesc’, available since Yodl 3.05, can be used to defines an item and its
description, using its suggested format (i.e., indenting the description relative
to the item).
`eit()’
Indicates an item in an enumerated list. The `eit’ macro should be used as an
argument in `enumeration’ macros.
`ellipsis()’
Sets ellipsis (...).
`em(text)’
Sets `text’ as emphasized, usually italics.
`email(address)’
In HTML, this macro sets the `address’ in a `<a href="mailto=..">’ locator. In
other output formats, the `address’ is sent to the output. The `email’ macro is a
special case of `url’.
`enumeration(list)’
`enumeration()’ starts an enumerated list. Use `eit()’ in the list to indicate
items in the list.
`euro()’
Sets the euro currency symbol in latex, html, (and possibly sgml and xml). In all
other conversions EUR which is the official textual abbreviation (cf.
http://ec.europa.eu/euro/entry.html) is written. Note that LaTeX may require
latexpackage()(eurosym).
`evalsymbol(symbol)(expression)’
Symbol symbol receives the value resulting from evaluating expression. E.g., if
`sym’ is a defined symbol, then
evalsymbol(sym)(SUBSTR(hello world)(3)(2))
assigns the value `lo’ to `sym’.
`fig(label)’
This macro is a shorthand for `figure ref(label)’ and just makes the typing
shorter, as in `see fig(schematic) for ..’ See `getfigurestring()’ and
`setfigurestring()’ for the `figure’ text.
`figure(file)(caption)(label)’
Sets the picture in `file’ as a figure in the current document, using the
descriptive text `caption’. The `label’ is defined as a placeholder for the figure
number and can be used in a corresponding `ref’ statement. Note that the `file’
must be the filename without extension: By default, Yodl will supply `.gif’ when in
HTML mode, or `.ps’ when in LaTeX mode. Figures in other modes may not (yet) haven
been implemented.
When converting to html, this macro uses three attribute-strings (if available).
The string pushed first using an attrib-call defines the attributes for its
`<figcaption>’ html-markup; the string pushed next defines the attributes for its
`<img>’ html-markup; the string pushed last defines the attributes for its
`<figure>’ html-markup. The `figure’ macro’s html output is organized like this:
<figure -attrib-string pushed last (if any)>
<img ... -attrib-string pushed last but one>
<figcaption -attrib-string pushed 2nd to last>
...
</figcaption>
</figure>
Starting with Yodl 3.07.00 no `alt="Figure # is shown here..."’ attribute is
defined anymore for the `img’ markup: an `alt’-attribute can easily be defined at
the last attrib-call, using `getfigurestring()’ to obtain `Figure’ or its
language-specific translation, and `COUNTERVALUE(XXfigurecounter)’ to obtain the
order-number of the figure shown in the next `figure’-macro call.
`file(text)’
Sets `text’ as filename, usually boldface. In html `attrib’ macro applies to the
`<strong>’ tag.
`findex()’
Generate an index entry for LaTex() or texinfo f-indices. Its argument is the index
entry. See also the `[cptv]index’ macro.
`footnote(text)’
Sets `text’ as a footnote, or between parentheses when the output format does not
allow footnotes.
`gagmacrowarning(name name ...)’
Prevents the `yodl’ program from printing cannot expand possible user macro. E.g.,
if you have in your document `the file(s) are ..’ then you might want to put before
that: `gagmacrowarning(file)’. Calls `NOUSERMACRO’.
`getaffilstring()’
Expands to the string that defines the name of Affiliation Information, by default
AFFILIATION INFORMATION. Can be redefined for national language support by
`setaffilstring()’. Currently, it is relevant only for txt.
`getauthorstring()’
Expands to the string that defines the name of Author Information, by default
AUTHOR INFORMATION. Can be redefined for national language support by
`setauthorstring()’. Currently, it is relevant only for txt.
`getchapterstring()’
Expands to the string that defines a `chapter’ entry, by default Chapter. Can be
redefined for national language support by `setchapterstring()’.
`getdatestring()’
Expands to the string that defines the name of Date Information, by default DATE
INFORMATION. Can be redefined for national language support by `setdatestring()’.
Currently, it is relevant only for txt.
`getfigurestring()’
Returns the string that defines a `figure’ text, in captions or in the `fig()’
macro. The string can be redefined using the `setfiguretext()’ macro.
`getpartstring()’
Expands to the string that defines a `part’ entry, by default Part. Can be
redefined for national language support by `setpartstring()’.
`gettitlestring()’
Expands to the string that defines the name of Title Information, by default TITLE
INFORMATION. Can be redefined for national language support by `settitlestring()’.
Currently, it is relevant only for txt.
`gettocstring()’
Expands to the string that defines the name of the table of contents, by default
Table of Contents. Can be redefined for national language support by
`settocstring()’.
`htmlcommand(cmd)’
Writes `cmd’ to the output when converting to html. The `cmd’ is not further
expanded by Yodl.
`htmlheadfile(file)’
Adds the contents of `file’ to the `head’ section of an HTML document. The contents
of file are not interpreted and should contain plain html text. This option can be
useful when large bodies of text, like the contents of `<script>’ sections, must be
included into the head section of html documents. This macro is only active in the
preamble, should only specified once, and is only interpreted for html conversions.
`htmlheadopt(option)’
Adds the literal text `option’ to the current information in the `head’ section of
an HTML document. `Option’ may (or: should) contain plain html text. A commonly
occurring head option is `link’, defining, e.g., a style sheet. Since that option
is frequently used, it has received a dedicated macro: `htmlstylesheet’. When large
bodies of html-text must be added to html documents the macro `htmlheadfile’ should
be used. This macro is only active in the preamble and is only interpreted for html
conversions.
`htmlnewfile()’
In HTML output, starts a new file. All other formats are not affected. Note that
you must take your own provisions to access the new file; say via links. Also,
it’s safe to start a new file just befoore opening a new section, since sections
are accessible from the clickable table of contents. The HTML converter normally
only starts new files prior to a `chapter’ definition.
`htmlstyle(tag)(definition)’
Adds a `<style type="text/css"> ... </style>’ element to the head section of an
HTML document.
Use `htmlstyle’ to specify one or more CSS definitions which are eventually
inserted at the ellipsis (`...’) in the generic `style’ definition shown above.
E.g., (using `#rrggbb’ to specify a color, where `rr’ are two hexadecimal digits
specifying the color’s red component, `gg’ two hexadecimal digits specifying the
color’s green component, and `bb’ two hexadecimal digits specifying the color’s
blue component) specifying
htmlstyle(body)(color: #rrggbb; background-color: #rrggbb)
htmlstyle(h1)(color: blue; text-align: center)
htmlstyle(h2)(color: green)
results in the element
<style type="text/css">
body {color: #rrggbb; background-color: #rrggbb;}
h1 {color: blue; text-align: center;}
h2 {color: green;}
</style>
The macros `htmlheadopt’ and `htmlstylesheet’ could also be used to put information
into the head-section of an HTML document, but `htmlheadopt’ is of a much more
general nature, while `htmlstylesheet’ refers to CSS elements stored in an external
file. The macro `attrib’ can be used to define inline styles.
The `htmlstyle’ macro is only active in the preamble and is only interpreted for
html conversions.
Refer to available CSS specifications (cf., http://www.w3schools.com/cssref/ for an
overview of how CSS specifications are used, and which CSS specifications are
available).
By default the internal style specification
`figure {text-align: center;} img {vertical-align: center;}’
is used. If this is not appropriate, specify `nohtmlimgstyle()’ in the preamble.
`htmlstylesheet(url)’
Adds a `<link rel="stylesheet" type="text/css" ...>’ element to the head section of
an HTML document, using `url’ in its `href’ field. The argument `url’ is not
expanded, and should be plain HTML text, without surrounding quotes. The macro
`htmlheadopt’ can also be used to put information in the head-section of an HTML
document, but `htmlheadopt’ is of a much more general nature. This macro is only
active in the preamble and is only interpreted for html conversions.
`htmltag(tagname)(start)’
Sets `tagname’ as a HTML tag, enclosed by `<’ and `>’. When `start’ is zero, the
`tagname’ is prefixed with `/’. As not all html tags are available through
predefined Yodl-macros (there are too many of them, some are used very
infrequently, and you can easily define macros for the tags for which Yodl doesn’t
offer predefined ones), the `htmltag’ macro can be used to handle your own set of
macros. In html the `attrib’ macro is supported. E.g.,
attrib(title="World Health Organization") htmltag(abbr)()WHO+htmltag(abbr)(0)
`ifnewparagraph(truelist)(falselist)’
The macro `ifnewparagraph’ should be called from the `PARAGRAPH’ macro, if defined.
It will insert `truelist’ if a new paragraph is inserted, otherwise `falselist’ is
inserted (e.g., following two consecutive calls of PARAGRAPH). This macro can be
used to prevent outputting multiple blank lines.
`includefile(file)’
Includes `file’. The default extension `.yo’ is supplied if necessary.
Since Yodl version 3.00.0 Yodl’s default file inclusion behavior has changed. The
current working directory no longer remains fixed at the directory in which Yodl is
called, but is volatile, changing to the directory in which a yodl-file is located.
This has the advantage that Yodl’s file inclusion behavior now matches the way C’s
`#include’ directive operates. The originally implemented file inclusion behavior
is used when Yodl’s `-L’ (`--legacy-include’) option is used.
`includeverbatim(file)’
Include `file’ into the output. No processing is done, `file’ should be in
preformatted form, e.g.:
whenhtml(includeverbatim(foo.html))
`it()’ Indicates an item in an itemized list. Items in `it’ macros are arguments of
`itemization’ macros.
`itdesc(itemname)(contents)’
Starts an item and its description in a description list. Its name is `itemname’,
the contents of the item is defined by `contents’. The `itemname’ is defined by
using the `dit’ macro.
With `html’ conversions the contents are surrounded by `<dd>’ and `</dd>’ tags,
resulting in contents which are indented relative to the itemname. When the
`attrib’ macro is used it is applied to the itemname (`dt’-tags).
With other conversions the `contents’ are quoted (as if using `quote(contents)’).
`itemization(list)’
Sets `list’ as an itemizationd list. Use `it()’ to indicate items in the list.
`kindex()’
Generate an index entry for LaTex() or texinfo k-indices. Its argument is the index
entry. See also the `[cfptv]vindex’ macro.
`label(labelname)’
Defines `labelname’ as an anchor for a `link’ command, or to stand for the last
numbering of a section or figure in a `ref’ command.
`langle()’
Character <
`languagedutch()’
Defines the Dutch-language specific headers. Active this macro via
setlanguage(dutch).
`languageenglish()’
Defines the English-language specific headers. Active this macro via
setlanguage(english).
`languageportugese()’
Defines the Portugese-language specific headers. Active this macro via
setlanguage(portugese).
`LaTeX()’
The LaTeX symbol.
`latexaddlayout(arg)’
This macro is provided to add Yodl-interpreted text to your own LaTeX layout
commands. The command is terminated with an end-of-line. See also the macro
`latexlayoutcmds()’
`latexcommand(cmd)’
Writes `cmd’ plus a white space to the output when converting to LaTeX. The `cmd’
is not further expanded by Yodl.
`latexdocumentclass(class)’
Forces the LaTeX `\documentclass{...}’ setting to `class’. Normally the class is
defined by the macros `article’, `report’ or `book’. This macro is an escape route
in case you need to specify your own document class for LaTeX. This option is a
modifier and must appear before the `article’, `report’ or `book’ macros.
`latexlayoutcmds(NOTRANSs)’
This macro is provided in case you want to put your own LaTeX layout commands into
LaTeX output. The `NOTRANSs’ are pasted right after the `\documentclass’ stanza.
The default is, of course, no local LaTeX commands. Note that this macro does not
overrule my favorite LaTeX layout. Use `nosloppyhfuzz()’ and `standardlayout()’ to
disable my favorite LaTeX layout.
`latexoptions(options)’
Set latex options: `documentclass[options]’. This command must appear before the
document type is stated by `article’, `report’, etc..
`latexpackage(options)(name)’
Include latex package(s), a useful package is, e.g., `epsf’. This command must
appear before the document type is stated by `article’, `report’, etc..
`lchapter(label)(title)’
Starts a new chapter in books or reports, setting a label at the beginning of the
chapter.
`letter(language)(date)(subject)(opening)(salutation)(author)’
Starts a letter written in the indicated language. The date of the letter is set to
`date’, the subject of the letter will be `subject’. The letter starts with
`opening’. It is based on the `letter.cls’ document class definition. The macro is
available for LaTeX only. Preamble command suggestions:
o `latexoptions(11pt)’
o `a4enlarged()’
o `letterreplyto(name)(address)(postalcode/city)’
o `letterfootitem(phone)(number)’, maybe e-mail too.
o `letteradmin(yourdate)(yourref)’
o `letterto(addressitem)’. Use a separate `letterto()’ macro call for each new line
of the address.
`letteraddenda(type)(value)’
Adds an addendum at the end of a letter. `type’ should be `bijlagen’, `cc’ or `ps’.
`letteradmin(yourdate)(yourref)’
Puts `yourletterfrom’ and `yourreference’ elements in the letter. If left empty,
two dashes are inserted.
`letterfootitem(name)(value)’
Puts a footer at the bottom of letter-pages. Up to three will usually fit. LaTeX
only.
`letterreplyto(name)(address)(zip city)’
Defines the `reply to’ address in LaTeX or txt-letters.
`letterto(element)’
Adds `element’ as an additional line to the address in LaTeX letters.
`link(description)(labelname)’
In HTML output a clickable link with the text `description’ is created that points
to the place where `labelname’ is defined using the `label’ macro, and `attrib’
macro applies to the `<a>’ tag. Using `link’ is similar to `url’, except that a
hyperlink is set pointing to a location in the same document. For output formats
other than HTML, only the `description’ appears.
`lref(description)(labelname)’
This macro is a combination of the `ref’ and `link’ macros. In HTML output a
clickable link with the text `description’ and the label value is created that
points to the place where `labelname’ is defined using the `label’ macro, and
`attrib’ macro applies to the `<a>’ tag. For output formats other than HTML, only
the `description’ and the label value appears.
`lsect(label)(title)’
Starts a new section, setting a label at the beginning of the section. In html
`attrib’ macro applies to the `<h2>’ tag.
`lsubsect(label)(title)’
Starts a new subsection. Other sectioning commands are `subsubsect’ and
`subsubsubsect’. A label is added just before the subsection. In html `attrib’
macro applies to the `<h3>’ tag.
`lsubsubsect(label)(title)’
Starts a sub-subsection, a label is added just before the section In html `attrib’
macro applies to the `<h4>’ tag.
`lsubsubsubsect(label)(title)’
Starts a sub-sub-sub section. This level of sectioning is not numbered, in contrast
to `higher’ sectionings. A label is added just before the subsubsubection.
`lurl(locator)’
An url described by its Locator. For small urls with readable addresses.
`mailto(address)’
Defines the default `mailto’ address for HTML output. Must appear before the
document type is stated by `article’, `report’, etc..
`makeindex()’
Make index for latex.
`mancommand(cmd)’
Writes `cmd’ to the output when converting to man. The `cmd’ is not further
expanded by Yodl.
`manpage(title)(section)(date)(source)(manual)’
Starts a manual page document. The `section’ argument must be a number, stating to
which section the manpage belongs to. Most often used are commands (1), file
formats (5) and macro packages (7). The sectioning commands in a manpage are not
`(n)sect’ etc., but `manpage...()’. The first section must be the `manpagename’,
the last section must be the `manpageauthor’. The standard manpage for section 1
contains the following sections (in the given order): `manpagename’,
`manpagesynopsis’, `manpagedescription’, `manpageoptions’, `manpagefiles’,
`manpageseealso’, `manpagediagnostics’, `manpagebugs’, `manpageauthor’. Optional
extra sections can be added with `manpagesection’. Standard manpageframes for
several manpagesections are provided in `/usr/local/share/yodl/manframes’. YODL
manual pages can be converted to `groff, html’, or plain ascii text formats.
`manpageauthor()’
Starts the AUTHOR entry in a `manpage’ document. Must be the last section of a
`manpage’.
`manpagebugs()’
Starts the BUGS entry in a `manpage’ document.
`manpagedescription()’
Starts the DESCRIPTION entry in a `manpage’ document.
`manpagediagnostics()’
Starts the DIAGNOSTICS entry in a `manpage’ document.
`manpagefiles()’
Starts the FILES entry in a `manpage’ document.
`manpagename(name)(short description)’
Starts the NAME entry in a `manpage’ document. The short description is used by,
e.g., the `whatis’ database.
`manpageoptions()’
Starts the OPTIONS entry in a `manpage’ document.
`manpagesection(SECTIONNAME)’
Inserts a non-required section named `SECTIONNAME’ in a `manpage’ document. This
macro can be used to augment `standard’ manual pages with extra sections, e.g.,
EXAMPLES. Note that the name of the extra section should appear in upper case,
which is consistent with the normal typesetting of manual pages.
`manpageseealso()’
Starts the SEE ALSO entry in a `manpage’ document.
`manpagesynopsis()’
Starts the SYNOPSIS entry in a `manpage’ document.
`manttquoted(onOff)’
With man-conversions arguments of tt macros are displayed as normal text. To
enhance their visibility arguments of tt macros may be quoted, in which case they
are surrounded by backtics and normal quotes. By default arguments of tt macros are
not quoted. Quotation is used after calling `manttquoted(1)’, and is suppressed
after calling `manttquoted(0)’. The macro is only active when converting to man.
`mbox()’
Unbreakable box in LaTeX. Other formats may have different opitions on our
unbreakable boxex.
`metaC(text)’
Put a line comment in the output.
`metaCOMMENT(text)’
Write format-specific comment to the output.
`mscommand(cmd)’
Writes `cmd’ to the output when converting to ms. The `cmd’ is not further expanded
by Yodl.
`nbsp(count)’
Inserts `count’ `non-breaking space’ characters into the generated output; i.e.,
the space character is not optimized away. If the argument list is empty one
non-breaking space is inserted.
`nchapter(title)’
Starts a chapter (in a `book’ or `report’) without generating a number before the
title and without placing an entry for the chapter in the table of contents. In
html `attrib’ macro applies to the `<h1>’ tag.
`nemail(name)(address)’
Named email. A more consistent naming for url, lurl, email and nemail would be
nice.
`nl()’ Forces a newline; i.e., breaks the current line in two.
`nodeprefix(text)’
Prepend text to node names, e.g.
nodeprefix(LilyPond) sect(Overview)
Currently used in texinfo descriptions only.
`nodeprefix(text)’
Prepend text to node names, e.g.
nodeprefix(LilyPond) sect(Overview)
Currently used in texinfo descriptions only.
`nodetext(text)’
Use text as description for the next node, e.g.
nodetext(The GNU Music Typesetter)chapter(LilyPond)
Currently used in texinfo descriptions only.
`nohtmlfive()’
Starting yodl 3.05 html-conversions by default use html5. This can be suppressed
(in favor of using html4) by calling this macro. This macro merely suppresses
writing the initial `<!DOCTYPE html>’ to generated html files; it is only active in
the preamble and is only interpreted for html conversions.
`nohtmlimgstyle()’
By default html-pages specify
`(<style type="text/css" img {vertical-align: bottom;}></style>)’
This macro suppresses this `img’ CSS style specification. This macro is only active
in the preamble and is only interpreted for html conversions.
`nop(text)’
Expand to text, to avoid spaces before macros e.g.: a. Although a+sups(2) should
have the same effect.
`nosloppyhfuzz()’
By default, LaTeX output contains commands that cause it to shut up about hboxes
that are less than 4pt overfull. When `nosloppyhfuzz()’ appears before stating the
document type, LaTeX complaints are `vanilla’.
`notableofcontents()’
Prevents the generation of a table of contents. This is default in, e.g., `manpage’
and `plainhtml’ documents. When present, this option must appear before stating the
document type with `article’, `report’ etc..
`notitleclearpage()’
Prevents the generation of a `clearpage()’ instruction after the typesetting of
title information. This instruction is default in all non `article’ documents. When
present, must appear before stating the document type with `article’, `book’ or
`report’.
`notocclearpage()’
With the LaTeX converter, no `clearpage()’ instruction is inserted immediately
beyond the document’s table of contents. The `clearpage()’ instruction is default
in all but the `article’ document type. When present, must appear before stating
the document type with `article’, `book’ or `report’. With other converters than
the LaTeX converter, it is ignored.
`notransinclude(filename)’
Reads filename and inserts it literally in the text not subject to macro expansion
or character translation. No information is written either before or after the
file’s contents, not even a newline.
`noxlatin()’
When used in the preamble, the LaTeX converter disables the inclusion of the file
`xlatin1.tex’. Normally this file gets included in the LateX output files to ensure
the conversion of high ASCII characters (like e) to LaTeX-understandable codes.
(The file `xlatin1.tex’ comes with the YODL distribution.)
`nparagraph(title)’
Starts a non-numbered paragraph (duh, corresponds to subparagraph in latex).
`npart(title)’
Starts a part in a `book’ document, but without numbering it and without entering
the title of the part in the table of contents. In html `attrib’ macro applies to
the `<h1>’ tag.
`nsect(title)’
Starts a section, but does not generate a number before the `title’ nor an entry in
the table of contents. Further sectioning commands are `nsubsect’, `nsubsubsect’
and `nsubsubsubsect’. In html `attrib’ macro applies to the `<h2>’ tag.
`nsubsect(title)’
Starts a non-numbered subsection. In html the `attrib’ macro applies to the `<h3>’
tag.
`nsubsubsect(title)’
Starts a non-numbered sub-sub section. In html `attrib’ macro applies to the `<p>’
tag.
`nsubsubsect(title)’
Starts a non-numbered sub-subsection.
`paragraph(title)’
Starts a paragraph. This level of sectioning is not numbered, in contrast to
`higher’ sectionings (duh, corresponds to subparagraph in latex). In html `attrib’
macro applies to the `<p>’ tag.
`part(title)’
Starts a new part in a `book’ document. In html `attrib’ macro applies to the
`<h1>’ tag.
`pindex()’
Generate an index entry for LaTex() or texinfo p-indices. Its argument is the index
entry. See also the `[cftv]index’ macro.
`plainhtml(title)’
Starts a document for only a plain HTML conversion. Not available in other output
formats. Similar to `article’, except that an author- and date field are not
needed.
`printindex()’
Make index for texinfo (?).
`quote(text)’
Sets the text as a quotation. Usually, the text is indented, depending on the
output format. In html the `attrib’ macro is recognized by the `<blockquote>’ tag.
`rangle()’
Inserts the right angle character (>).
`redef(macro)(nrofargs)(redefinition)’
Defines macro `macro’ to expand to `redefinition’. Similar to `def’, but any
pre-existing definition is overruled. Use `ARG’x in the redefinition part to
indicate where the arguments should be pasted. E.g., `ARG1’ places the first
argument, `ARG2’ the second argument, etc...
`redefinemacro(macro)(nrofargs)(redefinition)’
Defines macro `macro’ to expand to `redefinition’. Similar to `def’, but any
pre-existing definition is overruled. Use `ARG’x in the redefinition part to
indicate where the arguments should be pasted. E.g., `ARG1’ places the first
argument, `ARG2’ the second argument, etc... This commands is actually calling
redef().
`ref(labelname)’
Sets the reference for `labelname’. Use `label’ to define a label.
`report(title)(author)(date)’
Starts a report type document. The top-level sectioning command in a report is
`chapter’. In html the way the headings are displayed can be tuned using CSS id
selector specifications: the title has `id="title"’, the author `id="author"’, and
the date `id="date"’.
`roffcmd(dotcmd)(sameline)(secondline)(thirdline)’
Sets a t/nroff command that starts with a dot, on its own line. The arguments are:
`dotcmd’ - the command itself, e.g., `.IP’; `sameline’ - when not empty, `sameline’
is set on the same line, following the `dotcmd’; `secondline’ - when not empty, is
set on the next line; `thirdline’ - when not empty, is set on the third line. Note:
`dotcmd’ and `thirdline’ are not further expanded by YODL, the other arguments are.
`row(contents)’
The argument `contents’ may contain a man-page alignment specification (only one
specification can be entered per row), using `setmanalign()’. If omitted, the
standard alignment is used. Furthermore it contains the contents of the elements of
the row, using `cell()’ or `cells()’ macros. If `cells()’ is used, `setmanalign()’
should have been used too. In this macro call only the `cell()’, `cells()’ and
`setmanalign()’ macros should be called. Any other macro call may produce
unexpected results.
The `row’ macro defines a counter `XXcol’ that can be inspected and is incremented
by predefined macros adding columns to a row. The counter is initially 0.
Predefined macros adding columns to a row add the number of columns they add to the
row inserting the contents of those columns. These macros rely on the correct
value of this counter and any user-defined macros adding columns to table rows
should correctly update `XXcol’. In html `attrib’ macro applies to the `<tr>’ tag.
Instead of using `row’ in `table’, consider using `tr’ in `tbl’.
`rowline()’
Sets a horizontal line over the full width of the table. See also the `columnline’
macro. Use `rowline’ instead of a `row’ macro call to provide a table with a
horizontal line-separator.
Instead of using `rowline’ consider using `tline’ in a `tbl’ argument.
`sc(text)’
Set `text’ in the tt (code) font, using small caps. In html the `attrib’ macro is
not supported, while the code section is embedded in a `<div style="font-size:
90%">’ section.
`sect(title)’
Starts a new section. In html the `attrib’ macro is recognized by the `<h2>’ tag.
`setaffilstring(name)’
Defines `name’ as the `affiliation information’ string, by default AFFILIATION
INFORMATION. E.g., after `setaffilstring(AFILIACION)’, YODL outputs this Spanish
string to describe the affiliation information. Currently, it is relevant only for
txt.
`setauthorstring(name)’
Defines `name’ as the `Author information’ string, by default AUTHOR INFORMATION.
E.g., after `setauthorstring(AUTOR)’, YODL outputs this portuguese string to
describe the author information. Currently, it is relevant only for txt.
`setchapterstring(name)’
Defines `name’ as the `chapter’ string, by default Chapter. E.g., after
`setchapterstring(Hoofdstuk)’, YODL gains some measure of national language support
for Dutch. Note that LaTeX support has its own NLS, this macro doesn’t affect the
way LaTeX output looks.
`setdatestring(name)’
Defines `name’ as the `date information’ string, by default DATE INFORMATION. E.g.,
after `setdatestring(DATA)’, YODL outputs this portuguese string to describe the
date information. Currently, it is relevant only for txt.
`setfigureext(name)’
Defines the `name’ as the `figure’ extension. The extension should include the
period, if used. E.g., use setfigureext(.ps) if the extensions of the figure-images
should end in `.ps’
`setfigurestring(name)’
Defines the `name’ as the `figure’ text, used e.g. in figure captions. E.g., after
`setfigurestring(Figuur)’, Yodl uses Dutch names for figures.
`sethtmlfigureext(ext)’
Defines the filename extension for HTML figures, defaults to `.jpg’. Note that a
leading dot must be included in `ext’. The new extension takes effect starting with
the following usage of the `figure’ macro. It is only active in html, but
otherwise acts identically as setfigureext().
See also the `setlatexfigureext’ macro.
`htmlmetacharset(meta-charset)’
Adds `<meta charset="meta-charset">’ to the head of html documents. By default
`<meta charset="UTF-8">’ is used. This macro is only active in the preamble and is
only interpreted for html conversions.
`setincludepath(name)’
Sets a new value of the include-path specification used when opening .yo files. A
warning is issued when the path specification does not include a .: element. Note
that the local directory may still be an element of the new include path, as the
local directory may be the only or the last element of the specification. For these
eventualities the new path specification is not checked.
`setlanguage(name)’
Installs the headers specific to a language. The argument must be the name of a
language, whose headers have been set by a corresponding languageXXX() call. For
example: languagedutch(). The language macros should set the names of the headers
of the following elements: table of contents, affiliation, author, chapter, date,
figure, part and title
`setlatexalign(alignment)’
This macro defines the table alignment used when setting tables in LaTeX. Use as
many `l’ (for left-alignment), `r’ (for right alignment), and `c’ (for
centered-alignment) characters as there are columns in the table. See also
`table()’.
Instead of using the `table’ macro consider using the `tbl’ macro.
`setlatexfigureext(ext)’
Defines the filename extension for encapsulated PostScript figures in LaTeX,
defaults to `.ps’. The dot must be included in t new extension `ext’. The new
extension takes effect starting with a following usage of the `figure’ macro. It is
only active in LaTeX, but otherwise acts identically as setfigureext().
See also the `sethtmlfigureext’ macro.
`setlatexverbchar(char)’
Set the char used to quote LaTeX \verb sequences
`setmanalign(alignment)’
This macro defines the table alignment in the context of the `table’ macro, and is
used when setting tables in man-pages (see tbl(1)).
Use as many `l’ (for left-alignment), `r’ (for right alignment), and `c’ (for
centered-alignment) characters as there are columns in the table.
Use `s’ to indicate that the column to its left is combined (spans into) the
current column. Use this specification when cells spanning multiple columns must be
defined.
Each row in a table which must be convertible to a manpage may be preceded by its
own `setmanalign’ call.
Note that neither `rowline’ nor `columnline’ requires `setmanalign’ specifications,
as these macros define rows by themselves. It is the responsibility of the author
to ensure that the number of alignment characters is equal to the number of columns
of the table.
Instead of using the `table’ macro consider using the `tbl’ macro.
`setpartstring(name)’
Defines `name’ as the `part’ string, by default Part. E.g., after
`setpartstring(Teil)’, Yodl identifies parts in the German way. Note that LaTeX
output does its own national language support; this macro doesn’t affect the way
LaTeX output looks.
`setrofftab(x)’
Sets the character separating items in a line of input data of a `roff’ (manpage)
table. By default it is set to `~’. This separator is used internally, and needs
only be changed (into some unique character) if the table elements themselves
contain `~’ characters.
This macro can be used in the context of the `table’ and `tbl’ macros.
`setrofftableoptions(optionlist)’
Set options used for man-conversion, as used by the `tbl’ and `table’ macros. By
default no options are used. Multiple options should be separated by blanks. From
the tbl(1) manpage, the following options are available:
o `center’ Centers the table; default is left-justified. In the context of the `tbl’
macro this is implied when the `tbl’ macro is specified as argument of the `center’
macro.
o `expand’ Makes the table as wide as the current line length
o `box’ Encloses the table in a box
o `allbox’ Encloses each item of the table in a box
See also `setrofftab’ which is used to set the character separating items in a line
of input data.
`settitlestring(name)’
Defines `name’ as the `title information’ string, by default TITLE INFORMATION.
E.g., after `settitlestring(TITEL)’, YODL outputs this Dutch string to describe the
title information. Currently, it is relevant only for txt.
`settocstring(name)’
Defines `name’ as the `table of contents’ string, by default Table of Contents.
E.g., after `settocstring(Inhalt)’, YODL identifies the table of contents in the
German way. Note that LaTeX output does its own national language support; this
macro doesn’t affect the way LaTeX output looks.
`sgmlcommand(cmd)’
Writes `cmd’ to the output when converting to sgml. The `cmd’ is not further
expanded by Yodl.
`sgmltag(tag)(onoff)’
Similar to `htmltag’, but used in the SGML converter.
`sloppyhfuzz(points)’
By default, LaTeX output contains commands that cause it to shut up about hboxes
that are less than 4pt overfull. When `sloppyhfuzz()’ appears before stating the
document type, LaTeX complaints occur only if hboxes are overfull by more than
`points’.
`standardlayout()’
Enables the default LaTeX layout. When this macro is absent, then the first lines
of paragraphs are not indented and the space between paragraphs is somewhat larger.
The `standardlayout()’ directive must appear before stating the document type as
`article’, `report’, etc..
`strong(contents)’
In html and xml the `contents’ are set between `<strong>’ and `</strong>’ tags. In
html `attrib’ macro applies to the `<strong>’ tag.
`subs(text)’
Sets text in subscript in supporting formats. In html the `attrib’ macro is
recognized by the `<sub>’ tag.
For superscripting, the `sups’ macro can be used.
`subsect(title)’
Starts a new subsection. Other sectioning commands are `subsubsect’ and
`subsubsubsect’. In html `attrib’ macro applies to the `<h3>’ tag.
`subsubsect(title)’
Starts a sub-subsection. In html `attrib’ macro applies to the `<h4>’ tag.
`subsubsubsect(title)’
Starts a sub-sub-sub-subsection. This level of sectioning is not numbered, in
contrast to `higher’ sectionings.
`sups(text)’
Sets text in superscript in supporting formats In html the `attrib’ macro is
recognized by the `<sup>’ tag.
For subscripting, the `subs’ macro can be used.
`table(nColumns)(alignment)(Contents)’
Instead of using the `table’ macro, consider using the `tbl’ macro.
The `table()’-macro defines a table. Its first argument specifies the number of
columns in the table.
Its second argument specifies the (standard) alignment of the information within
the cells as used by LaTeX or man/ms. Use `l’ for left-alignment, `c’ for
centered-alignment and `r’ for right alignment.
Its third argument defines the contents of the table which are the rows, each
containing column-specifications and optionally man/ms alignment definitions for
this row.
See also the `tableatt’ macro and the specialized `setmanalign()’ macro.
`tableatt(nColumns)(alignment)(Contents)’
Instead of using the `tableatt’ macro, consider using the `tbl’ macro.
The `tableatt()’-macro defines a table. The last `attrib’ call that was specified
before using the `tableatt()’-macro is used to specify html attributes for the
table. E.g., to center a table in html use
attrib(style="margin-left:auto;margin-right:auto;")
tableatt(...)
The macro’s first argument specifies the number of columns in the table. Its
second argument specifies the (standard) alignment of the information within the
cells as used by LaTeX or man/ms. Use `l’ for left-alignment, `c’ for
centered-alignment and `r’ for right alignment. Its third argument defines the
contents of the table which are the rows, each containing column-specifications and
optionally man/ms alignment definitions for this row.
See also the `table’ macro and the specialized `setmanalign()’ macro.
`tac(alignment)(contents)’
This macro is one of the four macros that can be used to define column contents of
rows of tables defined by the `tbl’ macro. Alternatively, `tc, tnc’, and `tnac’ can
be used.
The `tac’ macro is used as argument of the `tr’ macro. The cell’s alignment is
defined by the `alignment’ specification, containing at most two alignment
specifications: a horizontal alignment (one of c, l, r (centered, left-aligned,
right-aligned)) and a vertical alignment (one of t, b (vertical top- and
bottom-alignment)) (not all conversion types may support all alignment types, e.g.,
man-conversion does not support vertical bottom alignment). Specifications other
than c, l, r, b, and t and specifications beyond the second one are ignored. The
result of specifying conflicting alignment types (e.g., `lr’ or `tb’) is not
defined.
When converting to `man’, if the table’s contents should span multiple rows, then a
groff/troff(1) text block must be used. Since most tables do not use this, a text
block is not generated by default. To actually wrap the contents of column elements
in a text block while converting to `man’ prefix the first text block requiring a
text-block wrapping by `twrap(1)’, and end the last text block requiring a
text-block wrapping by `wrap(0)’.
The `tao’ macro can be used to overrule the specified alignment for a specific
conversion type.
The macro `tac’ recognizes `attrib’.
`tao(type)(specification)’
This macro is used inside the `tbl’ macro to override the alignment specification
that would otherwise be used for the next table element. It is only active for the
next `tc, tnc, tac,’ or `tnac’ call. Its first argument defines the conversion type
for which the override should be used, its second argument defines the alignment
specification to use.
Here are some examples:
tbl(lr)(
tr(
tc(left aligned)
tc(right aligned)
)
tr(
tao(html)(c)
tc(left aligned, centered with html)
tao(latex)(l)
tao(man)(l)
tac(c)(centered, latex and man: left aligned)
)
)
Further details about the `tao’ macro are provided in the yodltables(7) man-page.
`tbl(align)(contents)’
The `tbl’ macro refines the more basic `table’ macro. It was named after the tbl(1)
table formatting program used with troff(1) documents.
The `tbl’ macro currently is available for `html, man/ms, latex’ and `txt’
conversions.
Its first argument defines the alignment of the information in the table’s columns,
and is used by all conversions except `txt’. Use `l’ for left-alignment, `c’ for
centered-alignment and `r’ for right-alignment. Individual cells of the table may
override these default settings using the macros `tac’ and `tnac’.
Its second argument defines the contents of the table consisting of rows (using
`tr’), and horizontal lines (using `tline’), which may extend over the full table
width or may cover one or more individual columns. With `txt’ conversion rough
approximations of horizontal lines are used.
Tables defined by the `tbl’ macro are centered (pseudo centering (8 space
characters) is used for `txt’ conversion) when used as argument of the `center’
macro.
See also the `tao’ macro for information about how to realize specific alignments
for specific conversion types.
When defining `tbl’ tables it is advised to clearly layout the table specification.
To avoid inadvertently introducing new lines lines should end in a backslash (or
The macro `tbl’ recognizes `attrib’.
`tc(contents)’
This macro is one of the four macros that can be used to define column contents of
rows of tables defined by the `tbl’ macro. Alternatively, `tnc, tac’, and `tnac’
can be used.
The `tc’ macro is used as argument of the `tr’ macro. Its order within a row
defines its type attribute, using the alignment specification defined by the first
argument of the `tbl’ call. E.g., if `tbl(clr)(...)’ was used, then the contents of
the first `tc’ call in a `tr’ is centered in the table’s first column; the contents
of the second `tc’ call is left-aligned in the table’s second column; and the
contents of the third `tc’ call is right-aligned in the table’s third column.
When converting to `man’, if the table’s contents should span multiple rows, then a
groff/troff(1) text block must be used. Since most tables do not use this, a text
block is not generated by default. To actually wrap the contents of column elements
in a text block while converting to `man’ prefix the first text block requiring a
text-block wrapping by `twrap(1)’, and end the last text block requiring a
text-block wrapping by `wrap(0)’.
The `tao’ macro can be used to overrule the default alignment specification for a
specific conversion type.
The macro `tc’ recognizes `attrib’.
`tcell(text)’
Roff helper to set a table text-cell, i.e., a paragraph. For LaTeX special table
formatting p{} should be used.
When using the `tbl’ macro for defining tables the `twrap’ macro can be used to set
table elements in text-blocks (i.e., enclosing text, possibly containing newlines
in `T{’ and `T}’ sequences).
`telycommand(cmd)’
Writes `cmd’ to the output when converting to tely. The `cmd’ is not further
expanded by Yodl.
`TeX()’
The TeX symbol.
`texinfocommand(cmd)’
Writes `cmd’ to the output when converting to texinfo. The `cmd’ is not further
expanded by Yodl.
`tindex()’
Generate an index entry for LaTex() or texinfo t-indices. Its argument is the index
entry. See also the `[cfpv]index’ macro.
`titleclearpage()’
Forces a new page (using `clearpage’) following the title of a document. This is
already the default in books and reports, but can be overruled using
`notitleclearpage’. When present, it must appear in the preamble, i.e., before the
document type is stated as article, book or report.
`tline(beginNr)(endNr)’
This macro is used to insert a horizontal line spanning one or more columns of a
table defined by the `tbl’ macro.
If `endNr’ is not specified, and the `tline’ call does not follow a previous `line’
call in which `endNr’ was specified, then a horizontal line spanning the full width
of the table is defined (except when converting to plain text in which case a line
of `beginNr’ - (minus) characters is written; if `beginNr’ is not specified then a
line of 60 - characters is written).
If `endNr’ is not specified, but the `tline’ call follows previous `tline’ calls
that did specify `endNr’ then the current row is ended.
If `endNr’ is specified, then a horizontal line is set, starting at column number
`beginNr’ continuing through column number `endNr’. Note that these are numbers,
not offsets: `beginNr’ should be at least 1, `endNr’ must at least be equal to
`beginNr’ and should be at most equal to the number of columns in the table. The
`beginNr’ values of subsequent `tline’ calls refer to the same row as the first
`tline’ call, and must exceed `endNr’ of the previous `tline’ call.
Examples:
tline()() sets a line spanning the full table width
tline(1)(1) sets a line in column 1
tline(3)(4) sets another line in column 3 and 4
tline()() ends the previous line
tline()() sets a line spanning the full table width
`tnac(nCells)(alignment)(contents)’
This macro is one of the four macros that can be used to define column contents of
rows of tables defined by the `tbl’ macro. Alternatively, `tc, tac’, and `tnc’ can
be used.
The `tnac’ macro is used as argument of the `tr’ macro. Its first argument defines
the number of columns spanned by the contents (2nd argument) of the `tnc’ macro.
The cell’s alignment is defined by the macro’s second (`alignment’) specification,
containing at most two alignment specifications: a horizontal alignment (one of c,
l, r (centered, left-aligned, right-aligned)) and a vertical alignment (one of t, b
(vertical top- and bottom-alignment)) (not all conversion types may support all
alignment types). Specifications other than c, l, r, b, and t and specifications
beyond the second one are ignored. The result of specifying conflicting alignment
types (e.g., `lr’ or `tb’) is not defined.
When converting to `man’, if the table’s contents should span multiple rows, then a
groff/troff(1) text block must be used. Since most tables do not use this, a text
block is not generated by default. To actually wrap the contents of column elements
in a text block while converting to `man’ prefix the first text block requiring a
text-block wrapping by `twrap(1)’, and end the last text block requiring a
text-block wrapping by `wrap(0)’. Multiple rows in a text block are top-aligned
with left and righ neighboring cells.
The `tao’ macro can be used to overrule the default alignment specification for a
specific conversion type.
The macro `tnac’ recognizes `attrib’.
`tnc(nCells)(contents)’
This macro is one of the four macros that can be used to define the column contents
of rows of tables that are defined by the `tbl’ macro. Alternatively, `tc, tac’,
and `tnac’ can be used.
The `tnc’ macro is used as argument to the `tr’ macro. Its first argument defines
the number of columns spanned by the contents (2nd argument) of the `tnc’ macro.
The contents are centered in the `nCells’ columns.
When converting to `man’, if the table’s contents should span multiple rows, then a
groff/troff(1) text block must be used. Since most tables do not use this, a text
block is not generated by default. To actually wrap the contents of column elements
in a text block while converting to `man’ prefix the first text block requiring a
text-block wrapping by `twrap(1)’, and end the last text block requiring a
text-block wrapping by `wrap(0)’. Multiple rows in a text block are top-aligned
with left and righ neighboring cells.
The `tao’ macro can be used to overrule the default alignment specification for a
specific conversion type.
The macro `tc’ recognizes `attrib’.
`tocclearpage()’
With the LaTeX converter, a `clearpage()’ directive if inserted, immediately
following the document’s table of contents. This is already the default in all but
the `article’ document type, but it can be overruled by `notocclearpage()’. When
present, it must appear in the preamble; i.e., before the document type is stated
with `article’, `book’ or `report’. With other converters than the LaTeX converter,
it is ignored.
`tr(contents)’
This macro defines the rows of a table that is defined by the `tbl’ macro.
The macro `tr’ expects one argument: the contents of the row, defining the row’s
column elements. It is not used for defining a (partial) horizontal line: to set
horizontal lines in a table defined by the `tbl’ macro use the macro `tline’.
Normally the contents of the columns in a (`tr’) row is defined by of one or more
calls to the macros `tc, tac, tnc,’ and/or `tnac’.
The macro `tr’ recognizes `attrib’.
`tt(text)’
Sets `text’ in teletype font, and prevents it from being expanded. When converting
to man, `text’ is surrounded by a backtick and a single quote character.
For unbalanced parameter lists, use `CHAR(40)’ to get `(’ and `CHAR(41)’ to get
`)’.
The `tt’ macro does interpret character tables as well as any `SUBST’ definitions.
This is usually what is intended. In situations where this is unwelcome the
`ttbegin’ and `ttend’ pair of macros can be used, between which the builtin
commands `PUSHSUBST, POPSUBST, NOEXPAND’ and/or `NOTRANS’ can be used. E.g., to
clearly show two hyphens in LaTeX teletype font use
ttbegin()--ttend()
rather than
tt(--)
Likewise, use `ttbegin’ and `ttend’ if the teletype text contains accented letters
like e. To set this in teletype font use `ttbegin()\"’`e+ttend()’.
With html conversions the `attrib’ macro applies to the `<code>’ tag.
With man conversions the arguments of tt macros can be quoted. See the
`manttquoted’ macro for details.
`ttbegin()’
Initiates text set in teletype font. Following the text to set in teletype font a
`ttend()’ macro should be called.
Usually the `tt’ macro can be used instead of the `ttbegin’ -- `ttend’ combination.
However, `tt’ interprets character tables as well as `SUBST’ definitions. In
situations where this is unwelcome the `ttbegin’ and `ttend’ pair of macros can be
used, between which builtin commands like `PUSHSUBST, POPSUBST, NOEXPAND’ and/or
`NOTRANS’ can be used.
In html the `attrib’ macro applies to the `<code>’ tag.
`ttend()’
Ends text set in teletype font following `ttbegin’. Refer to the `ttbegin’ macro’s
description for details.
`twrap(value)’
Used for man/ms conversions only: when called with a non-zero argument before using
the `tc, tnc, tac’, and `tnac’ macros then their contents are wrapped in text
blocks (`T{ ... T}’ blocks). To end the wrapping `twrap(0)’ must be called. E.g.,
in the following row-definition the contents of columns three and four are set in
T-blocks when converting to man/ms:
tr(tc(one)tc(two)twrap(1)tc(one)tc(two)twrap(0))
`txtcommand(cmd)’
Writes `cmd’ to the output when converting to txt. The `cmd’ is not further
expanded by Yodl.
`url(description)(locator)’
In LaTeX documents the `description’ is sent to the output. For HTML, a link is
created with the descriptive text `description’ and pointing to `locator’. The
`locator’ should be the full URL, including service; e.g, `http://www.icce.rug.nl’,
but excluding the double quotes that are necessary in plain HTML. Use the macro
`link’ to create links within the same document. For other formats, something like
description [locator] will appear. In html `attrib’ macro applies to the `<a>’
tag.
`verb(text)’
Sets `text’ in verbatim mode: not subject to macro expansion or character table
expansion, and starting with Yodl version 4.00.00: not using `SUBST’ definitions.
See also `verborg’, which does not provide the protection against `SUBST’
definitions.
While converting Yodl-documents to target document types Yodl frequently uses the
(not further documented) builtin function `XXSUBST’. In the unlikely event that the
text `XXSUBST(...)’ must be written in a document, the sequence
XXSUBST+CHAR(40)...CHAR(41)
can be used.
The text that is passed as argument to the `verb’-macro appears literally on the
output, usually in a teletype font (that depends on the output format). This macro
is for larger chunks, e.g., listings.
When unbalanced parameter lists are required, use `CHAR(40)’ to get `(’ and
`CHAR(41)’ to get `)’.
`verbinclude(filename)’
Reads filename and inserts it literally in the text, set in verbatim mode. not
subject to macro expansion. The text appears literally on the output, usually in a
teletype font (that depends on the output format). This macro is an alternative to
`verb(...)’, when the text to set in verbatim mode is better kept in a separate
file.
`verbinsert(args)’
Passes `args’ to yodlverbinsert(1), inserting its output into the converted file.
This macro can be used to insert, e.g., a line-numbered indented file, or a labeled
subsection of a file, into the file that’s currently being written by `yodl’. E.g,
verbinsert(-ans4 file) -- inserts file, showing line
numbers, using a 4 blank-space
character wide indentation.
verbinsert(-ns4 //SECT file) -- inserts the section of file,
labeled //SECT file, showing
line numbers, using a 4
blank-space character wide
indentation.
`verborg(text)’
Sets `text’ in verbatim mode: not subject to macro expansion or character table
expansion, and starting with Yodl version 4.00.00: this macro replaces the
previosly defined `verb’ macro. The current `verb’ macro surrounds this macro by
`PUSHSUBST’ and `POPSUBST’.
The text that is passed as argument to the `verborg’-macro appears literally on the
output, albeit that `SUBST’ definitions are processed, usually in a teletype font
(that depends on the output format). This macro is for larger chunks, e.g.,
listings.
When unbalanced parameter lists are required, use `CHAR(40)’ to get `(’ and
`CHAR(41)’ to get `)’.
`verbpipe(command)(text)’
Pipe text through command, but don’t expand the output.
`vindex()’
Generate an index entry for LaTex() or texinfo v-indices. Its argument is the
index entry. See also the `[cfkpt]index’ macro.
`whenhtml(text)’
Sends `text’ to the output when in HTML conversion mode. The text is further
expanded if necessary.
`whenlatex(text)’
Sends `text’ to the output when in LATEX conversion mode. The text is further
expanded if necessary.
`whenman(text)’
Sends `text’ to the output when in MAN conversion mode. The text is further
expanded if necessary.
`whenms(text)’
Sends `text’ to the output when in MS conversion mode. The text is further expanded
if necessary.
`whensgml(text)’
Sends `text’ to the output when in SGML conversion mode. The text is further
expanded if necessary.
`whentely(text)’
Sends `text’ to the output when in TELY conversion mode. The text is further
expanded if necessary.
`whentexinfo(text)’
Sends `text’ to the output when in TEXINFO conversion mode. The text is further
expanded if necessary.
`whentxt(text)’
Sends `text’ to the output when in TXT conversion mode. The text is further
expanded if necessary.
`whenxml(text)’
Sends `text’ to the output when in XML conversion mode. The text is further
expanded if necessary.
`xit(itemname)’
Starts an xml menu item where the file to which the menu refers to is the argument
of the xit() macro. It should be used as argument to xmlmenu(), which has a 3rd
argument: the default path prefixed to the xit() elements.
This macro is only available within the xml-conversion mode. The argument must be a
full filename, including .xml extension, if applicable.
No .xml extension indicates a subdirectory, containing another sub-menu.
`xmlcommand(cmd)’
Writes `cmd’ to the output when converting to xml. The `cmd’ is not further
expanded by Yodl.
`xmlmenu(order)(title)(menulist)’
Starts an xmlmenu. Use itemization() to define the items. Only available in xml
conversion. The menutitle appears in the menu as the heading of the menu. The
menulist is a series of xit() elements, containing the name of the file to which
the menu refers as their argument (including a final /). Prefixed to evert every
xit()-element is the value of XXdocumentbase.
Order is the the `order’ of the menu. If omitted, no order is defined.
`xmlnewfile()’
In XML output, starts a new file. All other formats are not affected. Note that you
must take your own provisions to access the new file; say via links. Also, it’s
safe to start a new file just befoore opening a new section, since sections are
accessible from the clickable table of contents. The XML converter normally only
starts new files prior to a `chapter’ definition.
`xmlsetdocumentbase(name)’
Defines `name’ as the XML document base. No default. Only interpreted with xml
conversions. It is used with the figure and xmlmenu macros.
`xmltag(tag)(onoff)’
Similar to `htmltag’, but used in the XML converter.
OPTIONS
No options are relevant in respect to the macros.
FILES
The files in tmp/wip/macros define the converter’s macro packages. The scripts yodl2tex,
yodl2html, yodl2man etc. perform the conversions.
SEE ALSO
yodl(1), yodlbuiltins(7), yodlconverters(1), yodlletter(7), yodlmanpage(7), yodlpost(1),
yodlstriproff(1), yodltables(7), yodlverbinsert(1).
BUGS
-
AUTHOR
Frank B. Brokken (f.b.brokken@rug.nl),