NAME

       fence_intelmodular - Fence agent for Intel Modular

DESCRIPTION

       fence_intelmodular  is  an  I/O  Fencing agent which can be used with Intel Modular device
       (tested on Intel MFSYS25, should work with MFSYS35 as well).

       Note: Since firmware update version 2.7, SNMP v2 write support is removed, and replaced by
       SNMP v3 support. So agent now has default SNMP version 3. If you are using older firmware,
       please supply -d for command line and snmp_version option for your cluster.conf.

       fence_intelmodular accepts options on the command line as well as from stdin. Fenced sends
       parameters  through stdin when it execs the agent. fence_intelmodular can be run by itself
       with command line options.  This is useful for testing and for turning outlets on  or  off
       from scripts.

       Vendor URL: http://www.intel.com

PARAMETERS

       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -c, --community=[community]
              Set the community string

       -4, --inet4-only
              Forces agent to use IPv4 addresses only

       -6, --inet6-only
              Forces agent to use IPv6 addresses only

       -a, --ip=[ip]
              IP  address or hostname of fencing device This parameter is always required.

       -u, --ipport=[port]
              TCP/UDP port to use for connection with device (Default  Value:  161)

       -p, --password=[password]
              Login password or passphrase

       -S, --password-script=[script]
              Script to run to retrieve password

       -n, --plug=[id]
              Physical plug number on device, UUID or identification of machine This parameter is
              always required.

       -b, --snmp-auth-prot=[prot]
              Set authentication protocol (MD5|SHA)

       -P, --snmp-priv-passwd=[pass]
              Set privacy protocol password

       -R, --snmp-priv-passwd-script
              Script to run to retrieve privacy password

       -B, --snmp-priv-prot=[prot]
              Set privacy protocol (DES|AES)

       -E, --snmp-sec-level=[level]
              Set security level (noAuthNoPriv|authNoPriv|authPriv)

       -d, --snmp-version=[version]
              Specifies SNMP version to use (1|2c|3)

       -l, --username=[name]
              Login name

       -q, --quiet
              Disable logging to stderr. Does not affect --verbose or --debug logging to  syslog.

       -v, --verbose
              Verbose mode

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       -C, --separator=[char]
              Separator for CSV created by 'list' operation (Default Value: ,)

       --delay=[seconds]
              Wait X seconds before fencing is started (Default Value: 0)

       --login-timeout=[seconds]
              Wait X seconds for cmd prompt after login (Default Value: 5)

       --power-timeout=[seconds]
              Test X seconds for status change after ON/OFF (Default Value: 20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       --shell-timeout=[seconds]
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

       --snmpget-path=[path]
              Path to snmpget binary (Default Value: /usr/bin/snmpget)

       --snmpset-path=[path]
              Path to snmpset binary (Default Value: /usr/bin/snmpset)

       --snmpwalk-path=[path]
              Path to snmpwalk binary (Default Value: /usr/bin/snmpwalk)

ACTIONS

       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       list   List  available  plugs  with  aliases/virtual machines if there is support for more
              then one device. Returns N/A otherwise.

       list-status
              List available plugs with aliases/virtual machines and their power state if it  can
              be obtained without additional commands.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS

       action Fencing action (Default Value: reboot)

       community
              Set the community string

       inet4_only
              Forces agent to use IPv4 addresses only

       inet6_only
              Forces agent to use IPv6 addresses only

       ip     IP  address  or  hostname  of  fencing  device  This  parameter is always required.
              Obsoletes: ipaddr

       ipport TCP/UDP port to use for connection with device (Default  Value:  161)

       password
              Login password or passphrase Obsoletes: passwd

       password_script
              Script to run to retrieve password Obsoletes: passwd_script

       plug   Physical plug number on device, UUID or identification of machine This parameter is
              always required. Obsoletes: port

       snmp_auth_prot
              Set authentication protocol (MD5|SHA)

       snmp_priv_passwd
              Set privacy protocol password

       snmp_priv_passwd_script
              Script to run to retrieve privacy password

       snmp_priv_prot
              Set privacy protocol (DES|AES)

       snmp_sec_level
              Set security level (noAuthNoPriv|authNoPriv|authPriv)

       snmp_version
              Specifies SNMP version to use (1|2c|3)

       username
              Login name Obsoletes: login

       quiet  Disable logging to stderr. Does not affect --verbose or --debug logging to  syslog.

       verbose
              Verbose mode

       debug_file
              Write debug information to given file Obsoletes: debug

       version
              Display version information and exit

       help   Display help and exit

       separator
              Separator for CSV created by 'list' operation (Default Value: ,)

       delay  Wait X seconds before fencing is started (Default Value: 0)

       login_timeout
              Wait X seconds for cmd prompt after login (Default Value: 5)

       power_timeout
              Test X seconds for status change after ON/OFF (Default Value: 20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       shell_timeout
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       retry_on
              Count of attempts to retry power on (Default Value: 1)

       snmpget_path
              Path to snmpget binary (Default Value: /usr/bin/snmpget)

       snmpset_path
              Path to snmpset binary (Default Value: /usr/bin/snmpset)

       snmpwalk_path
              Path to snmpwalk binary (Default Value: /usr/bin/snmpwalk)