bionic (8) hddtemp.8.gz

Provided by: hddtemp_0.3-beta15-53_amd64 bug

NAME

       hddtemp - Utility to monitor hard drive temperature

SYNOPSIS

       hddtemp [options] [type:]disk...

DESCRIPTION

       hddtemp  will  give  you  the  temperature  of  your  hard  drive by reading Self-Monitoring Analysis and
       Reporting Technology (S.M.A.R.T.)  information on drives that support this  feature.   Only  modern  hard
       drives have a temperature sensor.  hddtemp supports reading S.M.A.R.T.  information from SCSI drives too.
       hddtemp can work as simple command line tool or as a daemon.

       You can specify one or more device drive path, where each path can be prefixed with  a  type  like  PATA,
       SATA or SCSI to force hddtemp too use one of these type (because detection can fail).

OPTIONS

       The  program follows the usual GNU command line syntax, with long options starting with two dashes (`-').
       A summary of options is included below.

       -b, --drivebase
              Display the database file that allows hddtemp to recognize a supported drive.

       -D, --debug
              Display various S.M.A.R.T. fields and their values.  Useful for finding  a  value  that  seems  to
              match the temperature and/or to send a report.  (done for every drive supplied)

       -d, --daemon
              Execute hddtemp in TCP/IP daemon mode (port 7634 by default).

       -f, --file=file
              Specify the database file to use.

       -F, --foreground
              Don't  fork  into the background even in daemon mode.  This is useful when running under a process
              supervisor.

       -l, --listen=addr
              Listen on a specific address.  addr is a string containing a host name or a numeric  host  address
              string.  The numeric host address string is a dotted-decimal IPv4 address or an IPv6 hex address.

       -n, --numeric
              Print only the temperature (without the unit).

       -p, --port=#
              Port number to listen to (in TCP/IP daemon mode).

       -s, --separator=char
              Separator to use between fields (in TCP/IP daemon mode).  The default separator is `|'.

       -S, --syslog=s
              Switch to daemon mode and log temperatures to syslog every s seconds.

       -q, --quiet
              Don't check if the drive is supported.

       -u, --unit=C|F
              Force output temperature either in Celsius or Fahrenheit.

       -v, --version
              Display hddtemp version number.

       -w, --wake-up
              Wake-up the drive if needed (ATA drives only).

       -4     Listen on IPv4 sockets only.

       -6     Listen on IPv6 sockets only.

DRIVE DATABASE

       If you know your drive has a temperature sensor but it is being reported unsupported, tell me which model
       and which manufacturer it is, and/or just add a new entry in /etc/hddtemp.db.  Each line of hddtemp.db is
       either a comment, a blank line or a line containing:

       - a regular expression that allow hddtemp to recognize a drive or a
              set of drives from its model name or from a generic model name,

       - a value (ATTRIBUTE_ID from S.M.A.R.T.),

       - a C or an F to set the unit to Celsius or Fahrenheit,

       - a description.

       Feedback is welcome (see the REPORT section below).

TCP/IP DAEMON MODE

       Example of type forcing:

       # hddtemp SATA:/dev/sda PATA:/dev/hda

       To test hddtemp in daemon mode, start it like this:

       # hddtemp -d /dev/hd[abcd]

       and use telnet or netcat (which is known as nc on some systems) to get a reply:

       # netcat localhost 7634

       The  drive database is read only once at startup, so hddtemp must be restarted if the database is updated
       for the changes to take effect.

REPORT

       As I receive a lot of reports, things must be  clarified.   When  running  hddtemp  with  debug  options,
       hddtemp  will  show  sort  of a dump of S.M.A.R.T. data.  Each field corresponds to an information field.
       The standard field for drive temperature is 194.  But this is not  always  the  case  (mostly  for  older
       drives).   Even if your drive has S.M.A.R.T. capabilities, it doesn't necessarily mean that it can report
       its temperature.  So, things must be determined through experimentation.

       So, you can try to guess which field by is the good one by running hddtemp at regular intervals:

        - just after starting up your PC/server/station,

        - after opening a window (a physical window :),

        - after opening the case,

        - whatever you can think of...

       and looking for a field's value that would increase or decrease depending on  what  effect  you  want  to
       induce.   Be  careful, fields 4, 9, and 12 are often reported to match a temperature field but after some
       investigation they do not.  But fields 194 (which is the standard field for temperature) and 231 are good
       candidates.

       Then,  you  can  send me a report with outputs from `hddtemp --debug ...', `smartctl' or `hdparm -i ...',
       and/or add an entry in hddtemp.db yourself.

BUGS

       If  hddtemp  crashes  (yes,  it  might)   for   some   unknown   reasons,   look   for   a   file   named
       hddtemp.backtrace.<PID>.XXXXXX (where XXXXXX is a random number generated at runtime) in /tmp.  Then, you
       can then send me this file and the hddtemp binary.  The backtrace functionality is currently supported on
       i386 architectures only.

SEE ALSO

       smartctl(8), syslog(3), syslogd(8).

AUTHOR

       Emmanuel Varagnat (hddtemp@guzu.net).

       This  manual page was originally written by Aurelien Jarno <aurel32@debian.org>, for the Debian GNU/Linux
       system (but may be used by others).

                                                  July 21, 2003                                       HDDTEMP(8)