NAME

       ipmiutil_delloem - OEM commands for Dell servers

SYNOPSIS

       ipmiutil delloem [-mx -NPRUEFJTVY] commands

DESCRIPTION

       ipmiutil  delloem  commands  is  a  program  that  uses  Dell OEM IPMI commands to perform
       platform-specific functions.

OPTIONS

       -m 002000
              Show FRU for a specific MC (e.g. bus 00, sa 20, lun 00).  This could  be  used  for
              PICMG  or  ATCA  blade  systems.  The trailing character, if present, indicates SMI
              addressing if 's', or IPMB addressing if 'i' or not present.

       -x     Causes extra debug messages to be displayed.

       -N nodename
              Nodename or IP address of the remote target system.  If a  nodename  is  specified,
              IPMI  LAN  interface  is  used.  Otherwise the local system management interface is
              used.

       -P/-R rmt_pswd
              Remote password for the nodename given.  The default is a null password.

       -U rmt_user
              Remote username for the nodename given.  The default is a null username.

       -E     Use the remote password from Environment variable IPMI_PASSWORD.

       -F drv_t
              Force the driver type to one of the followng: imb, va,  open,  gnu,  landesk,  lan,
              lan2,  lan2i, kcs, smb.  Note that lan2i means lan2 with intelplus.  The default is
              to detect any available driver type and use it.

       -J     Use  the  specified  LanPlus  cipher   suite   (0   thru   17):   0=none/none/none,
              1=sha1/none/none,   2=sha1/sha1/none,   3=sha1/sha1/cbc128,   4=sha1/sha1/xrc4_128,
              5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40.  Default is 3.

       -T     Use a specified IPMI LAN Authentication  Type:  0=None,  1=MD2,  2=MD5,  4=Straight
              Password, 5=OEM.

       -V     Use  a  specified  IPMI  LAN  privilege  level.  1=Callback  level,  2=User  level,
              3=Operator level, 4=Administrator level (default), 5=OEM level.

       -Y     Yes, do prompt the user for the IPMI LAN remote  password.   Alternatives  for  the
              password are -E or -P.

COMMANDS

       mac list
                 Lists the MAC address of LOMs

       mac get <NIC number>
                 Shows the MAC address of specified LOM. 0-7 System LOM, 8- DRAC/iDRAC.

       lan set <Mode>
                 Sets the NIC Selection Mode (dedicated, shared,
                     shared with failover lom2, shared with Failover all loms).

       lan get
                 Returns the current NIC Selection Mode (dedicated, shared,
                  shared with failover lom2, shared with Failover all loms).

       lan get  active
                 Returns the current active NIC (dedicated, LOM1, LOM2, LOM3, LOM4).

       powermonitor
                 Shows power tracking statistics

       powermonitor clear  cumulativepower
                 Reset cumulative power reading

       powermonitor clear  peakpower
                 Reset peak power reading

       powermonitor powerconsumption
                 Displays power consumption in <watt|btuphr>

       powermonitor powerconsumptionhistory  <watt|btuphr>
                 Displays power consumption history

       powermonitor getpowerbudget
                 Displays power cap in <watt|btuphr>

       powermonitor setpowerbudget  <val> <watt|btuphr|percent>
                 Allows user to set the  power cap in <watt|BTU/hr|percentage>

       powermonitor enablepowercap
                 To enable set power cap

       powermonitor disablepowercap
                 To disable set power cap

       windbg start
                 Starts the windbg session (Cold Reset & SOL Activation)

       windbg end
                 Ends the windbg session (SOL Deactivation)

       vFlash info Card
                 Shows Extended SD Card information

SEE ALSO

       ipmiutil(8)  ialarms(8)  iconfig(8)  icmd(8)  idiscover(8) ievents(8) ifru(8) igetevent(8)
       ihealth(8) ilan(8) ireset(8) isel(8) isensor(8) iserial(8) isol(8)

WARNINGS

       See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and  any  bug  fix
       list.

COPYRIGHT

       Copyright (C) 2009  Kontron America, Inc.

       See the file COPYING in the distribution for more details regarding redistribution.

       This utility is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY.

AUTHOR

       Andy Cress <arcress at users.sourceforge.net>

                                     Version 1.0: 17 Aug 2011                         IDELLOEM(8)