Ubuntu Manpage: ipsec - invoke IPsec utilities

Provided by: strongswan-starter_5.6.2-1ubuntu2.9_amd64

NAME

       ipsec - invoke IPsec utilities

SYNOPSIS

       ipsec command [arguments] [options]

DESCRIPTION

The ipsec utility invokes any of several utilities involved in controlling and monitoring
the IPsec encryption/authentication system, running the specified command with the
specified arguments and options as if it had been invoked directly. This largely
eliminates possible name collisions with other software, and also permits some centralized
services.

All the commands described in this manual page are built-in and are used to control and
monitor IPsec connections as well as the IKE daemon.

For other commands ipsec supplies the invoked command with a suitable PATH environment
variable, and also provides the environment variables listed under ENVIRONMENT.

CONTROL COMMANDS
start [starter options]
calls starter which in turn parses ipsec.conf and starts the IKE daemon charon.

update sends a HUP signal to starter which in turn determines any changes in ipsec.conf
and updates the configuration on the running IKE daemon charon.

reload sends a USR1 signal to starter which in turn reloads the whole configuration of the
running IKE daemon charon based on the actual ipsec.conf.

restart
is equivalent to stop followed by start after a guard of 2 seconds.

stop terminates all IPsec connections and stops the IKE daemon charon by sending a TERM
signal to starter.

up name
tells the IKE daemon to start up connection name.

down name
tells the IKE daemon to terminate connection name.

down name{n}
terminates IKEv1 Quick Mode and IKEv2 CHILD SA instance n of connection name.

down name{*}
terminates all IKEv1 Quick Mode and IKEv2 CHILD SA instances of connection name.

down name[n]
terminates IKE SA instance n of connection name.

down name[*]
terminates all IKE SA instances of connection name.

down-srcip <start> [<end>]
terminates all IKE SA instances with clients having virtual IPs in the range start-
end.

route name
tells the IKE daemon to insert an IPsec policy in the kernel for connection name.
The first payload packet matching the IPsec policy will automatically trigger an
IKE connection setup.

unroute name
remove the IPsec policy in the kernel for connection name.

status [name]
returns concise status information either on connection name or if the argument is
lacking, on all connections.

statusall [name]
returns detailed status information either on connection name or if the argument is
lacking, on all connections.

LIST COMMANDS
leases [<poolname> [<address>]]
returns the status of all or the selected IP address pool (or even a single virtual
IP address).

listalgs
returns a list supported cryptographic algorithms usable for IKE, and their
corresponding plugin.

listpubkeys [--utc]
returns a list of RSA public keys that were either loaded in raw key format or
extracted from X.509 and|or OpenPGP certificates.

listcerts [--utc]
returns a list of X.509 and|or OpenPGP certificates that were either loaded locally
by the IKE daemon or received via the IKE protocol.

listcacerts [--utc]
returns a list of X.509 Certification Authority (CA) certificates that were loaded
locally by the IKE daemon from the /etc/ipsec.d/cacerts/ directory or received via
the IKE protocol.

listaacerts [--utc]
returns a list of X.509 Authorization Authority (AA) certificates that were loaded
locally by the IKE daemon from the /etc/ipsec.d/aacerts/ directory.

listocspcerts [--utc]
returns a list of X.509 OCSP Signer certificates that were either loaded locally by
the IKE daemon from the /etc/ipsec.d/ocspcerts/ directory or were sent by an OCSP
server.

listacerts [--utc]
returns a list of X.509 Attribute certificates that were loaded locally by the IKE
daemon from the /etc/ipsec.d/acerts/ directory.

listgroups [--utc]
returns a list of groups that are used to define user authorization profiles.

listcainfos [--utc]
returns certification authority information (CRL distribution points, OCSP URIs,
LDAP servers) that were defined by ca sections in ipsec.conf.

listcrls [--utc]
returns a list of Certificate Revocation Lists (CRLs) that were either loaded by
the IKE daemon from the /etc/ipsec.d/crls directory or fetched from an HTTP- or
LDAP-based CRL distribution point.

listocsp [--utc]
returns revocation information fetched from OCSP servers.

listplugins
returns a list of all loaded plugin features.

listcounters [name]
returns a list of global or connection specific IKE counter values collected since
daemon startup.

listall [--utc]
returns all information generated by the list commands above. Each list command can
be called with the --utc option which displays all dates in UTC instead of local
time.

REREAD COMMANDS
rereadsecrets
flushes and rereads all secrets defined in ipsec.secrets.

rereadcacerts
removes previously loaded CA certificates, reads all certificate files contained in
the /etc/ipsec.d/cacerts directory and adds them to the list of Certification
Authority (CA) certificates. This does not affect certificates explicitly defined
in a ipsec.conf(5) ca section, which may be separately updated using the update
command.

rereadaacerts
removes previously loaded AA certificates, reads all certificate files contained in
the /etc/ipsec.d/aacerts directory and adds them to the list of Authorization
Authority (AA) certificates.

rereadocspcerts
reads all certificate files contained in the /etc/ipsec.d/ocspcerts/ directory and
adds them to the list of OCSP signer certificates.

rereadacerts
reads all certificate files contained in the /etc/ipsec.d/acerts/ directory and
adds them to the list of attribute certificates.

rereadcrls
reads all Certificate Revocation Lists (CRLs) contained in the /etc/ipsec.d/crls/
directory and adds them to the list of CRLs.

rereadall
executes all reread commands listed above.

RESET COMMANDS
resetcounters [name]
resets global or connection specific counters.

PURGE COMMANDS
purgecerts
purges all cached certificates.

purgecrls
purges all cached CRLs.

purgeike
purges IKE SAs that don't have a Quick Mode or CHILD SA.

purgeocsp
purges all cached OCSP information records.

INFO COMMANDS
--help returns the usage information for the ipsec command.

--version
returns the version in the form of Linux strongSwan U<strongSwan userland
version>/K<Linux kernel version> if strongSwan uses the native NETKEY IPsec stack
of the Linux kernel it is running on.

--versioncode
returns the version number in the form of U<strongSwan userland version>/K<Linux
kernel version> if strongSwan uses the native NETKEY IPsec stack of the Linux
kernel it is running on.

--copyright
returns the copyright information.

--directory
returns the LIBEXECDIR directory as defined by the configure options.

--confdir
returns the SYSCONFDIR directory as defined by the configure options.

--piddir
returns the PIDDIR directory as defined by the configure options.

FILES

       /usr/libexec/ipsec       utilities directory

ENVIRONMENT

       When  calling  other  commands  the  ipsec  command  supplies  the  following  environment
       variables.

       IPSEC_DIR               directory containing ipsec programs and utilities
       IPSEC_BINDIR            directory containing pki command
       IPSEC_SBINDIR           directory containing ipsec command
       IPSEC_CONFDIR           directory containing configuration files
       IPSEC_PIDDIR            directory containing PID/socket files
       IPSEC_SCRIPT            name of the ipsec script
       IPSEC_NAME              name of ipsec distribution
       IPSEC_VERSION           version numer of ipsec userland and kernel
       IPSEC_STARTER_PID       PID file for ipsec starter
       IPSEC_CHARON_PID        PID file for IKE keying daemon

HISTORY