NAME

       send-uucp - Send Usenet articles via UUCP

SYNOPSIS

       send-uucp [SITE ...]

DESCRIPTION

       The send-uucp program processes batch files written by innd(8) to send Usenet articles to UUCP sites.  It
       reads a configuration file to control how it behaves with various sites.  Normally, it's run periodically
       out of cron to put together batches and send them to remote UUCP sites.

OPTIONS

       Any arguments provided to the program are interpreted as a list of sites specfied in send-uucp.cf for
       which batches should be generated.  If no arguments are supplied then batches will be generated for all
       sites listed in that configuration file.

CONFIGURATION

       The sites to which articles are to be sent must be configured in the configuration file send-uucp.cf.
       Each site is specified with a line of the form:

           site[:host] [compressor [maxsize [batchtime]]]

       site
           The news site name being configured.  This must match a site name from newsfeeds(5).

       host
           The  UUCP  host  name  to which batches should be sent for this site.  If omitted, the news site name
           will be used as the UUCP host name.

       compressor
           The compression method to use for batches.  This should be one of compress, gzip or none.   Arguments
           for  the compression command may be specified by using "_" instead of spaces. For example, "gzip_-9".
           The default value is "compress".

       maxsize
           The maximum size of a single batch before compression.  The default value is 500,000 bytes.

       batchtime
           A comma separated list of hours during which batches should be generated  for  a  given  site.   When
           send-uucp  runs,  a  site  will  only  be  processed  if the current hour matches one of the hours in
           batchtime.  The default is no limitation on when to generate batches.

       Fields are seperated by spaces and only the site name needs to be specified, with defaults being used for
       unspecified values.  If the first character on a line is a "#" then the rest of the line is ignored.

EXAMPLE

       Here is an example send-uucp.cf configuration file:

           zoetermeer      gzip            1048576         5,18,22
           hoofddorp       gzip            1048576         5,18,22
           pa3ebv          gzip            1048576         5,18,22
           drinkel         gzip            1048576         5,6,18,20,22,0,2
           manhole         compress        1048576         5,18,22
           owl             compress        1048576
           able

       This defines seven UUCP sites.  The first four use gzip compression and the last three use compress.  The
       first six use a batch size of 1MB, and the last site (able) uses  the  default  of  500,000  bytes.   The
       zoetermeer,  hoofddorp,  pa3ebv,  and  manhole sites will only have batches generated for them during the
       hours of 05:00, 18:00, and 22:00, and the drinkel site will only  have  batches  generated  during  those
       hours  and  20:00, 00:00, and 02:00.  There are no restrictions on when batches will be generated for owl
       or able.

FILES

       pathetc/send-uucp.cf
           Configuration file specifying a list of sites to be processed.

NOTES

       The usual flags used for a UUCP feed in the newsfeeds file are "Tf,Wfb".

SEE ALSO

       innd(8), newsfeeds(5), uucp(8)

AUTHOR

       This program was originally written by Edvard Tuinder <ed@elm.net> and then maintained  and  extended  by
       Miquel  van  Smoorenburg  <miquels@cistron.nl>.   Marco  d'Itri  <md@linux.it>  cleaned  up  the code for
       inclusion in INN.  This manual page was written by Mark Brown <broonie@sirena.org.uk>.

perl v5.26.1                                       2017-11-02                                       SEND-UUCP(8)