Provided by: freebsd-manpages_11.1-3_all 
NAME
init_sleepqueues, sleepq_abort, sleepq_add, sleepq_alloc, sleepq_broadcast, sleepq_free,
sleepq_lock, sleepq_lookup, sleepq_release, sleepq_remove, sleepq_signal,
sleepq_set_timeout, sleepq_set_timeout_sbt, sleepq_sleepcnt, sleepq_timedwait,
sleepq_timedwait_sig, sleepq_type, sleepq_wait, sleepq_wait_sig — manage the queues of
sleeping threads
SYNOPSIS
#include <sys/param.h>
#include <sys/sleepqueue.h>
void
init_sleepqueues(void);
int
sleepq_abort(struct thread *td);
void
sleepq_add(void *wchan, struct lock_object *lock, const char *wmesg, int flags, int queue);
struct sleepqueue *
sleepq_alloc(void);
int
sleepq_broadcast(void *wchan, int flags, int pri, int queue);
void
sleepq_free(struct sleepqueue *sq);
struct sleepqueue *
sleepq_lookup(void *wchan);
void
sleepq_lock(void *wchan);
void
sleepq_release(void *wchan);
void
sleepq_remove(struct thread *td, void *wchan);
int
sleepq_signal(void *wchan, int flags, int pri, int queue);
void
sleepq_set_timeout(void *wchan, int timo);
void
sleepq_set_timeout_sbt(void *wchan, sbintime_t sbt, sbintime_t pr, int flags);
u_int
sleepq_sleepcnt(void *wchan, int queue);
int
sleepq_timedwait(void *wchan, int pri);
int
sleepq_timedwait_sig(void *wchan, int pri);
int
sleepq_type(void *wchan);
void
sleepq_wait(void *wchan, int pri);
int
sleepq_wait_sig(void *wchan, int pri);
DESCRIPTION
Sleep queues provide a mechanism for suspending execution of a thread until some condition
is met. Each queue is associated with a specific wait channel when it is active, and only
one queue may be associated with a wait channel at any given point in time. The
implementation of each wait channel splits its sleepqueue into 2 sub-queues in order to
enable some optimizations on threads' wakeups. An active queue holds a list of threads that
are blocked on the associated wait channel. Threads that are not blocked on a wait channel
have an associated inactive sleep queue. When a thread blocks on a wait channel it donates
its inactive sleep queue to the wait channel. When a thread is resumed, the wait channel
that it was blocked on gives it an inactive sleep queue for later use.
The sleepq_alloc() function allocates an inactive sleep queue and is used to assign a sleep
queue to a thread during thread creation. The sleepq_free() function frees the resources
associated with an inactive sleep queue and is used to free a queue during thread
destruction.
Active sleep queues are stored in a hash table hashed on the addresses pointed to by wait
channels. Each bucket in the hash table contains a sleep queue chain. A sleep queue chain
contains a spin mutex and a list of sleep queues that hash to that specific chain. Active
sleep queues are protected by their chain's spin mutex. The init_sleepqueues() function
initializes the hash table of sleep queue chains.
The sleepq_lock() function locks the sleep queue chain associated with wait channel wchan.
The sleepq_lookup() returns a pointer to the currently active sleep queue for that wait
channel associated with wchan or NULL if there is no active sleep queue associated with
argument wchan. It requires the sleep queue chain associated with wchan to have been locked
by a prior call to sleepq_lock().
The sleepq_release() function unlocks the sleep queue chain associated with wchan() and is
primarily useful when aborting a pending sleep request before one of the wait functions is
called.
The sleepq_add() function places the current thread on the sleep queue associated with the
wait channel wchan. The sleep queue chain associated with argument wchan must be locked by
a prior call to sleepq_lock() when this function is called. If a lock is specified via the
lock argument, and if the kernel was compiled with options INVARIANTS, then the sleep queue
code will perform extra checks to ensure that the lock is used by all threads sleeping on
wchan. The wmesg parameter should be a short description of wchan. The flags parameter is
a bitmask consisting of the type of sleep queue being slept on and zero or more optional
flags. The queue parameter specifies the sub-queue, in which the contending thread will be
inserted.
There are currently three types of sleep queues:
SLEEPQ_CONDVAR A sleep queue used to implement condition variables.
SLEEPQ_SLEEP A sleep queue used to implement sleep(9), wakeup(9) and wakeup_one(9).
SLEEPQ_PAUSE A sleep queue used to implement pause(9).
There are currently two optional flag:
SLEEPQ_INTERRUPTIBLE The current thread is entering an interruptible sleep.
SLEEPQ_STOP_ON_BDRY When thread is entering an interruptible sleep, do not stop it upon
arrival of stop action, like SIGSTOP. Wake it up instead.
A timeout on the sleep may be specified by calling sleepq_set_timeout() after sleepq_add().
The wchan parameter should be the same value from the preceding call to sleepq_add(), and
the sleep queue chain associated with wchan must have been locked by a prior call to
sleepq_lock(). The timo parameter should specify the timeout value in ticks.
sleepq_set_timeout_sbt() function takes sbt argument instead of timo. It allows to specify
relative or absolute wakeup time with higher resolution in form of sbintime_t. The
parameter pr allows to specify wanted absolute event precision. The parameter flags allows
to pass additional callout_reset_sbt() flags.
Once the thread is ready to suspend, one of the wait functions is called to put the current
thread to sleep until it is awakened and to context switch to another thread. The
sleepq_wait() function is used for non-interruptible sleeps that do not have a timeout. The
sleepq_timedwait() function is used for non-interruptible sleeps that have had a timeout set
via sleepq_set_timeout(). The sleepq_wait_sig() function is used for interruptible sleeps
that do not have a timeout. The sleepq_timedwait_sig() function is used for interruptible
sleeps that do have a timeout set. The wchan argument to all of the wait functions is the
wait channel being slept on. The sleep queue chain associated with argument wchan needs to
have been locked with a prior call to sleepq_lock(). The pri argument is used to set the
priority of the thread when it is awakened. If it is set to zero, the thread's priority is
left alone.
When the thread is resumed, the wait functions return a non-zero value if the thread was
awakened due to an interrupt other than a signal or a timeout. If the sleep timed out, then
EWOULDBLOCK is returned. If the sleep was interrupted by something other than a signal,
then some other return value will be returned.
A sleeping thread is normally resumed by the sleepq_broadcast() and sleepq_signal()
functions. The sleepq_signal() function awakens the highest priority thread sleeping on a
wait channel while sleepq_broadcast() awakens all of the threads sleeping on a wait channel.
The wchan argument specifics which wait channel to awaken. The flags argument must match
the sleep queue type contained in the flags argument passed to sleepq_add() by the threads
sleeping on the wait channel. If the pri argument does not equal -1, then each thread that
is awakened will have its priority raised to pri if it has a lower priority. The sleep
queue chain associated with argument wchan must be locked by a prior call to sleepq_lock()
before calling any of these functions. The queue argument specifies the sub-queue, from
which threads need to be woken up.
A thread in an interruptible sleep can be interrupted by another thread via the
sleepq_abort() function. The td argument specifies the thread to interrupt. An individual
thread can also be awakened from sleeping on a specific wait channel via the sleepq_remove()
function. The td argument specifies the thread to awaken and the wchan argument specifies
the wait channel to awaken it from. If the thread td is not blocked on the wait channel
wchan then this function will not do anything, even if the thread is asleep on a different
wait channel. This function should only be used if one of the other functions above is not
sufficient. One possible use is waking up a specific thread from a widely shared sleep
channel.
The sleepq_sleepcnt() function offer a simple way to retrieve the number of threads sleeping
for the specified queue, given a wchan.
The sleepq_type() function returns the type of wchan associated to a sleepqueue.
The sleepq_abort(), sleepq_broadcast(), and sleepq_signal() functions all return a boolean
value. If the return value is true, then at least one thread was resumed that is currently
swapped out. The caller is responsible for awakening the scheduler process so that the
resumed thread will be swapped back in. This is done by calling the kick_proc0() function
after releasing the sleep queue chain lock via a call to sleepq_release().
The sleep queue interface is currently used to implement the sleep(9) and condvar(9)
interfaces. Almost all other code in the kernel should use one of those interfaces rather
than manipulating sleep queues directly.
SEE ALSO
condvar(9), runqueue(9), scheduler(9), sleep(9), timeout(9)