Provided by: limesuite_17.12.0+dfsg-1_amd64 

NAME
LimeUtil - control and update LMS7 based transceiver devices
SYNOPSIS
LimeUtil [OPTIONS]
DESCRIPTION
LimeUtil is a tool to show information about and control LMS7 based transceiver devices such as the
LimeSDR. It can be used to update the firmware and to calibrate the device.
OPTIONS
--help Print a help message.
--info Print information about LimeSuite and found devices.
--find[="SPEC"]
Discover available devices, restricted to those matching the SPEC if given. If no matching
devices are found it will exit with exit status 1.
--make[="SPEC"]
Create a device instance.
Advanced options
--args[="ARGS"]
Supply arguments ARGS to the --update, --fpga and --fw options.
--update
Download latest firmware and program it into the device flash memory.
--fpga="FILE"
Program FPGA firmware image in FILE to device flash memory.
--fw="FILE"
Program FX3 firmware image in FILE to device flash memory.
--timing
Time interfaces and operations.
Calibrations sweep
--cal[="ARGS"]
Calibrate device. Use ARGS to select and configure device.
--start=FREQ
Start calibration sweep at frequency FREQ Hz.
--stop=EQ
Stop calibration sweep at frequency FREQ Hz.
--step=STEP
Step frequency during calibration sweep by STEP Hz (default 1 MHz).
--bw=BW
Set calibration bandwidth to BW Hz (default 30 MHz).
--dir=DIR
Set calibration direction to DIR (one of RX, TX or BOTH, default is BOTH).
--chans=CHANNELS
Set calibration channels to CHANNELS (one of 0, 1 or ALL, default is ALL).
HOMEPAGE
LimeUtil is part of the Lime Suite.
SEE ALSO
LimeSuiteGUI(1)
Lime Suite 2017-09-18 LIMEUTIL(1)