Provided by: expect_5.45.4-1_amd64 bug

NAME

       expect - programmed dialogue with interactive programs, Version 5

SYNOPSIS

       expect [ -dDinN ] [ -c cmds ] [ [ -[f|b] ] cmdfile ] [ args ]

INTRODUCTION

       Expect  is  a  program  that  "talks" to other interactive programs according to a script.
       Following the script, Expect knows what can be  expected  from  a  program  and  what  the
       correct  response  should  be.   An interpreted language provides branching and high-level
       control structures to direct the dialogue.  In addition, the user  can  take  control  and
       interact directly when desired, afterward returning control to the script.

       Expectk is a mixture of Expect and Tk.  It behaves just like Expect and Tk's wish.  Expect
       can also be used directly in C or C++ (that is, without Tcl).  See libexpect(3).

       The name "Expect" comes from the idea of send/expect sequences popularized by uucp, kermit
       and  other  modem control programs.  However unlike uucp, Expect is generalized so that it
       can be run as a user-level command with any program and task in mind.  Expect can actually
       talk to several programs at the same time.

       For example, here are some things Expect can do:

              •   Cause  your computer to dial you back, so that you can login without paying for
                  the call.

              •   Start a game (e.g., rogue) and if the  optimal  configuration  doesn't  appear,
                  restart it (again and again) until it does, then hand over control to you.

              •   Run  fsck, and in response to its questions, answer "yes", "no" or give control
                  back to you, based on predetermined criteria.

              •   Connect  to  another  network  or  BBS  (e.g.,  MCI   Mail,   CompuServe)   and
                  automatically  retrieve  your  mail  so that it appears as if it was originally
                  sent to your local system.

              •   Carry environment variables, current directory,  or  any  kind  of  information
                  across rlogin, telnet, tip, su, chgrp, etc.

       There  are  a  variety  of reasons why the shell cannot perform these tasks.  (Try, you'll
       see.)  All are possible with Expect.

       In general, Expect is useful for running any program which  requires  interaction  between
       the  program  and  the  user.   All  that  is  necessary  is  that  the interaction can be
       characterized programmatically.  Expect can also  give  the  user  back  control  (without
       halting  the program being controlled) if desired.  Similarly, the user can return control
       to the script at any time.

USAGE

       Expect reads cmdfile for a list of commands  to  execute.   Expect  may  also  be  invoked
       implicitly  on systems which support the #! notation by marking the script executable, and
       making the first line in your script:

           #!/usr/bin/expect -f

       Of course, the path must accurately describe where Expect  lives.   /usr/bin  is  just  an
       example.

       The  -c  flag  prefaces  a  command  to be executed before any in the script.  The command
       should be quoted to prevent being broken up  by  the  shell.   This  option  may  be  used
       multiple  times.   Multiple  commands  may be executed with a single -c by separating them
       with semicolons.  Commands are executed in the order they appear.   (When  using  Expectk,
       this option is specified as -command.)

       The  -d  flag enables some diagnostic output, which primarily reports internal activity of
       commands such as expect and interact.  This flag has the same effect as  "exp_internal  1"
       at  the beginning of an Expect script, plus the version of Expect is printed.  (The strace
       command is useful for tracing statements, and the trace  command  is  useful  for  tracing
       variable assignments.)  (When using Expectk, this option is specified as -diag.)

       The  -D  flag  enables  an  interactive  debugger.   An  integer value should follow.  The
       debugger will take control before the next Tcl procedure if the value is non-zero or if  a
       ^C  is  pressed  (or a breakpoint is hit, or other appropriate debugger command appears in
       the script).  See the README file  or  SEE  ALSO  (below)  for  more  information  on  the
       debugger.  (When using Expectk, this option is specified as -Debug.)

       The -f flag prefaces a file from which to read commands from.  The flag itself is optional
       as it is only useful when using the #! notation (see above), so that other  arguments  may
       be supplied on the command line.  (When using Expectk, this option is specified as -file.)

       By  default,  the  command  file  is read into memory and executed in its entirety.  It is
       occasionally desirable to read files one line at a time.  For example, stdin is read  this
       way.   In  order  to force arbitrary files to be handled this way, use the -b flag.  (When
       using Expectk, this option is specified as -buffer.)  Note that stdio-buffering may  still
       take place however this shouldn't cause problems when reading from a fifo or stdin.

       If  the  string "-" is supplied as a filename, standard input is read instead.  (Use "./-"
       to read from a file actually named "-".)

       The -i flag causes Expect to interactively prompt for commands  instead  of  reading  them
       from  a  file.  Prompting is terminated via the exit command or upon EOF.  See interpreter
       (below) for more information.  -i is assumed if neither a command file  nor  -c  is  used.
       (When using Expectk, this option is specified as -interactive.)

       --  may  be used to delimit the end of the options.  This is useful if you want to pass an
       option-like argument to your script without it being  interpreted  by  Expect.   This  can
       usefully  be placed in the #! line to prevent any flag-like interpretation by Expect.  For
       example, the following will leave the original arguments (including the  script  name)  in
       the variable argv.

           #!/usr/bin/expect --

       Note  that  the  usual  getopt(3)  and  execve(2) conventions must be observed when adding
       arguments to the #! line.

       The file $exp_library/expect.rc is sourced automatically if present, unless the -N flag is
       used.   (When  using Expectk, this option is specified as -NORC.)  Immediately after this,
       the file ~/.expect.rc is sourced automatically, unless  the  -n  flag  is  used.   If  the
       environment  variable  DOTDIR  is  defined, it is treated as a directory and .expect.rc is
       read from there.  (When using Expectk, this option is specified as -norc.)  This  sourcing
       occurs only after executing any -c flags.

       -v  causes  Expect  to  print  its  version  number  and exit.  (The corresponding flag in
       Expectk, which uses long flag names, is -version.)

       Optional args are constructed into a list and stored in the variable named argv.  argc  is
       initialized to the length of argv.

       argv0  is  defined  to  be  the  name of the script (or binary if no script is used).  For
       example, the following prints out the name of the script and the first three arguments:

           send_user "$argv0 [lrange $argv 0 2]\n"

COMMANDS

       Expect uses Tcl (Tool Command Language).   Tcl  provides  control  flow  (e.g.,  if,  for,
       break),  expression  evaluation  and  several  other features such as recursion, procedure
       definition, etc.  Commands used here but  not  defined  (e.g.,  set,  if,  exec)  are  Tcl
       commands  (see  tcl(3)).   Expect  supports  additional commands, described below.  Unless
       otherwise specified, commands return the empty string.

       Commands are listed alphabetically so that they can  be  quickly  located.   However,  new
       users  may find it easier to start by reading the descriptions of spawn, send, expect, and
       interact, in that order.

       Note that the best introduction to the language (both Expect and Tcl) is provided  in  the
       book  "Exploring Expect" (see SEE ALSO below).  Examples are included in this man page but
       they are very limited since this man page is meant primarily as reference material.

       Note that in the text of this man page, "Expect" with  an  uppercase  "E"  refers  to  the
       Expect  program  while  "expect" with a lower-case "e" refers to the expect command within
       the Expect program.)

       close [-slave] [-onexec 0|1] [-i spawn_id]
             closes the connection to the current process.  Most interactive programs will detect
             EOF  on  their  stdin  and  exit; thus close usually suffices to kill the process as
             well.  The -i flag  declares  the  process  to  close  corresponding  to  the  named
             spawn_id.

             Both  expect  and interact will detect when the current process exits and implicitly
             do a close.  But if you kill the process by, say, "exec kill $pid", you will need to
             explicitly call close.

             The  -onexec  flag determines whether the spawn id will be closed in any new spawned
             processes or if the process is overlayed.  To leave a spawn id open, use  the  value
             0.   A  non-zero  integer value will force the spawn closed (the default) in any new
             processes.

             The -slave flag closes the slave associated with the spawn id.  (See "spawn  -pty".)
             When  the  connection  is closed, the slave is automatically closed as well if still
             open.

             No matter whether the connection is closed implicitly or explicitly, you should call
             wait  to  clear  up the corresponding kernel process slot.  close does not call wait
             since there is no guarantee that closing a process connection will cause it to exit.
             See wait below for more info.

       debug [[-now] 0|1]
             controls  a  Tcl  debugger allowing you to step through statements, set breakpoints,
             etc.

             With no arguments, a 1 is returned if the debugger is not running, otherwise a 0  is
             returned.

             With  a  1  argument,  the  debugger is started.  With a 0 argument, the debugger is
             stopped.  If a 1 argument is preceded by the -now  flag,  the  debugger  is  started
             immediately  (i.e.,  in  the  middle  of  the debug command itself).  Otherwise, the
             debugger is started with the next Tcl statement.

             The debug command does not change any traps.  Compare this to starting  Expect  with
             the -D flag (see above).

             See the README file or SEE ALSO (below) for more information on the debugger.

       disconnect
             disconnects  a  forked  process  from  the  terminal.   It  continues running in the
             background.  The process is given its own process group (if possible).  Standard I/O
             is redirected to /dev/null.

             The  following  fragment  uses  disconnect  to  continue  running  the script in the
             background.

                 if {[fork]!=0} exit
                 disconnect
                 . . .

             The following script reads a password, and then  runs  a  program  every  hour  that
             demands  a  password  each time it is run.  The script supplies the password so that
             you only have to type it once.  (See the stty command which demonstrates how to turn
             off password echoing.)

                 send_user "password?\ "
                 expect_user -re "(.*)\n"
                 for {} 1 {} {
                     if {[fork]!=0} {sleep 3600;continue}
                     disconnect
                     spawn priv_prog
                     expect Password:
                     send "$expect_out(1,string)\r"
                     . . .
                     exit
                 }

             An  advantage to using disconnect over the shell asynchronous process feature (&) is
             that Expect can save the terminal parameters prior to disconnection, and then  later
             apply  them  to  new  ptys.   With  &,  Expect  does  not  have a chance to read the
             terminal's parameters since the terminal is already disconnected by the time  Expect
             receives control.

       exit [-opts] [status]
             causes Expect to exit or otherwise prepare to do so.

             The -onexit flag causes the next argument to be used as an exit handler.  Without an
             argument, the current exit handler is returned.

             The -noexit flag causes Expect to  prepare  to  exit  but  stop  short  of  actually
             returning  control to the operating system.  The user-defined exit handler is run as
             well as Expect's own internal  handlers.   No  further  Expect  commands  should  be
             executed.   This is useful if you are running Expect with other Tcl extensions.  The
             current interpreter (and main window if in the Tk environment) remain so that  other
             Tcl  extensions  can clean up.  If Expect's exit is called again (however this might
             occur), the handlers are not rerun.

             Upon exiting, all connections to spawned processes  are  closed.   Closure  will  be
             detected  as  an  EOF by spawned processes.  exit takes no other actions beyond what
             the normal _exit(2) procedure does.  Thus, spawned processes that do not  check  for
             EOF may continue to run.  (A variety of conditions are important to determining, for
             example, what signals a  spawned  process  will  be  sent,  but  these  are  system-
             dependent,  typically documented under exit(3).)  Spawned processes that continue to
             run will be inherited by init.

             status (or 0 if not specified) is returned as the exit status of  Expect.   exit  is
             implicitly executed if the end of the script is reached.

       exp_continue [-continue_timer]
             The  command  exp_continue  allows  expect  itself to continue executing rather than
             returning as it normally would. By default exp_continue resets  the  timeout  timer.
             The  -continue_timer  flag prevents timer from being restarted. (See expect for more
             information.)

       exp_internal [-f file] value
             causes further commands to send diagnostic information internal to Expect to  stderr
             if  value  is  non-zero.   This  output  is  disabled if value is 0.  The diagnostic
             information includes every character received, and every attempt made to  match  the
             current output against the patterns.

             If the optional file is supplied, all normal and debugging output is written to that
             file (regardless of the value of value).  Any previous  diagnostic  output  file  is
             closed.

             The  -info  flag causes exp_internal to return a description of the most recent non-
             info arguments given.

       exp_open [args] [-i spawn_id]
             returns a Tcl file identifier that corresponds to the original spawn id.   The  file
             identifier  can then be used as if it were opened by Tcl's open command.  (The spawn
             id should no longer be used.  A wait should not be executed.

             The -leaveopen flag leaves the spawn id open for access through Expect commands.   A
             wait must be executed on the spawn id.

       exp_pid [-i spawn_id]
             returns  the  process  id corresponding to the currently spawned process.  If the -i
             flag is used, the pid returned corresponds to that of the given spawn id.

       exp_send
             is an alias for send.

       exp_send_error
             is an alias for send_error.

       exp_send_log
             is an alias for send_log.

       exp_send_tty
             is an alias for send_tty.

       exp_send_user
             is an alias for send_user.

       exp_version [[-exit] version]
             is useful for assuring that the script is compatible with  the  current  version  of
             Expect.

             With no arguments, the current version of Expect is returned.  This version may then
             be encoded in your script.  If you actually know that you are not using features  of
             recent versions, you can specify an earlier version.

             Versions  consist  of  three  numbers separated by dots.  First is the major number.
             Scripts written for versions of Expect with a different  major  number  will  almost
             certainly not work.  exp_version returns an error if the major numbers do not match.

             Second  is  the  minor  number.   Scripts written for a version with a greater minor
             number than the current version may depend upon some new feature and might not  run.
             exp_version returns an error if the major numbers match, but the script minor number
             is greater than that of the running Expect.

             Third is a number that plays no part in the  version  comparison.   However,  it  is
             incremented  when the Expect software distribution is changed in any way, such as by
             additional documentation or optimization.  It is reset to  0  upon  each  new  minor
             version.

             With the -exit flag, Expect prints an error and exits if the version is out of date.

       expect [[-opts] pat1 body1] ... [-opts] patn [bodyn]
             waits until one of the patterns matches the output of a spawned process, a specified
             time period has passed, or an end-of-file is seen.  If the final body is  empty,  it
             may be omitted.

             Patterns  from  the most recent expect_before command are implicitly used before any
             other patterns.  Patterns from the most recent expect_after command  are  implicitly
             used after any other patterns.

             If  the arguments to the entire expect statement require more than one line, all the
             arguments may be "braced" into one so as to  avoid  terminating  each  line  with  a
             backslash.   In  this  one  case, the usual Tcl substitutions will occur despite the
             braces.

             If a pattern is the keyword eof, the corresponding body  is  executed  upon  end-of-
             file.   If a pattern is the keyword timeout, the corresponding body is executed upon
             timeout.  If no timeout keyword is used, an implicit null action  is  executed  upon
             timeout.   The  default  timeout period is 10 seconds but may be set, for example to
             30, by the command "set timeout 30".  An infinite timeout may be designated  by  the
             value  -1.   If a pattern is the keyword default, the corresponding body is executed
             upon either timeout or end-of-file.

             If a pattern matches, then the corresponding body is executed.  expect  returns  the
             result  of  the body (or the empty string if no pattern matched).  In the event that
             multiple patterns match, the one appearing first is used to select a body.

             Each time new output arrives, it is compared to each pattern in the order  they  are
             listed.   Thus,  you  may  test  for  absence  of a match by making the last pattern
             something guaranteed to appear, such as a prompt.  In situations where there  is  no
             prompt, you must use timeout (just like you would if you were interacting manually).

             Patterns  are  specified  in three ways.  By default, patterns are specified as with
             Tcl's string match command.  (Such patterns are  also  similar  to  C-shell  regular
             expressions  usually  referred to as "glob" patterns).  The -gl flag may may be used
             to protect patterns that might otherwise match expect  flags  from  doing  so.   Any
             pattern  beginning  with  a "-" should be protected this way.  (All strings starting
             with "-" are reserved for future options.)

             For example, the following fragment looks for a successful login.  (Note that  abort
             is presumed to be a procedure defined elsewhere in the script.)

                 expect {
                     busy               {puts busy\n ; exp_continue}
                     failed             abort
                     "invalid password" abort
                     timeout            abort
                     connected
                 }

             Quotes  are  necessary  on the fourth pattern since it contains a space, which would
             otherwise separate the pattern from the action.  Patterns with the same action (such
             as  the  3rd and 4th) require listing the actions again.  This can be avoid by using
             regexp-style patterns (see below).  More information on forming glob-style  patterns
             can be found in the Tcl manual.

             Regexp-style  patterns follow the syntax defined by Tcl's regexp (short for "regular
             expression") command.  regexp patterns  are  introduced  with  the  flag  -re.   The
             previous example can be rewritten using a regexp as:

                 expect {
                     busy       {puts busy\n ; exp_continue}
                     -re "failed|invalid password" abort
                     timeout    abort
                     connected
                 }

             Both  types  of  patterns are "unanchored".  This means that patterns do not have to
             match the entire string, but can begin and end the match anywhere in the string  (as
             long  as  everything else matches).  Use ^ to match the beginning of a string, and $
             to match the end.  Note that if you do not wait  for  the  end  of  a  string,  your
             responses  can easily end up in the middle of the string as they are echoed from the
             spawned process.  While  still  producing  correct  results,  the  output  can  look
             unnatural.   Thus, use of $ is encouraged if you can exactly describe the characters
             at the end of a string.

             Note that in many editors, the ^  and  $  match  the  beginning  and  end  of  lines
             respectively.  However,  because expect is not line oriented, these characters match
             the beginning and end of the data (as opposed to  lines)  currently  in  the  expect
             matching buffer.  (Also, see the note below on "system indigestion.")

             The  -ex  flag  causes  the  pattern  to  be  matched  as  an  "exact"  string.   No
             interpretation of *, ^, etc is made (although the usual Tcl conventions  must  still
             be observed).  Exact patterns are always unanchored.

             The  -nocase  flag  causes  uppercase characters of the output to compare as if they
             were lowercase characters.  The pattern is not affected.

             While  reading  output,  more  than  2000  bytes  can  force  earlier  bytes  to  be
             "forgotten".   This  may  be  changed  with  the  function  match_max.   (Note  that
             excessively large values  can  slow  down  the  pattern  matcher.)   If  patlist  is
             full_buffer,  the  corresponding  body  is  executed  if  match_max  bytes have been
             received and no other patterns have matched.  Whether or not the full_buffer keyword
             is used, the forgotten characters are written to expect_out(buffer).

             If  patlist  is  the  keyword  null,  and  nulls  are  allowed (via the remove_nulls
             command), the corresponding body is executed if a single ASCII 0 is matched.  It  is
             not possible to match 0 bytes via glob or regexp patterns.

             Upon  matching  a  pattern  (or  eof  or  full_buffer),  any matching and previously
             unmatched output is saved in  the  variable  expect_out(buffer).   Up  to  9  regexp
             substring   matches   are   saved  in  the  variables  expect_out(1,string)  through
             expect_out(9,string).  If the -indices flag is used before a pattern,  the  starting
             and  ending  indices (in a form suitable for lrange) of the 10 strings are stored in
             the  variables  expect_out(X,start)  and  expect_out(X,end)  where  X  is  a  digit,
             corresponds  to  the  substring  position  in the buffer.  0 refers to strings which
             matched the entire pattern and is generated for glob  patterns  as  well  as  regexp
             patterns.  For example, if a process has produced output of "abcdefgh\n", the result
             of:

                 expect "cd"

             is as if the following statements had executed:

                 set expect_out(0,string) cd
                 set expect_out(buffer) abcd

             and "efgh\n" is left in the  output  buffer.   If  a  process  produced  the  output
             "abbbcabkkkka\n", the result of:

                 expect -indices -re "b(b*).*(k+)"

             is as if the following statements had executed:

                 set expect_out(0,start) 1
                 set expect_out(0,end) 10
                 set expect_out(0,string) bbbcabkkkk
                 set expect_out(1,start) 2
                 set expect_out(1,end) 3
                 set expect_out(1,string) bb
                 set expect_out(2,start) 10
                 set expect_out(2,end) 10
                 set expect_out(2,string) k
                 set expect_out(buffer) abbbcabkkkk

             and  "a\n"  is left in the output buffer.  The pattern "*" (and -re ".*") will flush
             the output buffer without reading any more output from the process.

             Normally, the matched output is discarded from Expect's internal buffers.  This  may
             be  prevented  by  prefixing  a  pattern  with  the  -notransfer flag.  This flag is
             especially useful in experimenting (and can be abbreviated to "-not" for convenience
             while experimenting).

             The  spawn  id associated with the matching output (or eof or full_buffer) is stored
             in expect_out(spawn_id).

             The -timeout flag causes the current expect command to use the following value as  a
             timeout instead of using the value of the timeout variable.

             By  default,  patterns  are matched against output from the current process, however
             the -i flag declares the output from the named spawn_id list be matched against  any
             following  patterns  (up  to  the  next  -i).   The spawn_id list should either be a
             whitespace separated list of spawn_ids or a variable referring to  such  a  list  of
             spawn_ids.

             For  example,  the following example waits for "connected" from the current process,
             or "busy", "failed" or "invalid password" from the spawn_id named by $proc2.

                 expect {
                     -i $proc2 busy {puts busy\n ; exp_continue}
                     -re "failed|invalid password" abort
                     timeout abort
                     connected
                 }

             The value of the global variable any_spawn_id may be used to match patterns  to  any
             spawn_ids that are named with all other -i flags in the current expect command.  The
             spawn_id from a -i flag with no associated pattern (i.e.,  followed  immediately  by
             another  -i)  is  made  available  to  any other patterns in the same expect command
             associated with any_spawn_id.

             The -i flag may also name a global variable in which case the variable is read for a
             list of spawn ids.  The variable is reread whenever it changes.  This provides a way
             of changing the I/O source while the command is in execution.   Spawn  ids  provided
             this way are called "indirect" spawn ids.

             Actions  such  as  break  and continue cause control structures (i.e., for, proc) to
             behave in the usual way.  The command exp_continue allows expect itself to  continue
             executing rather than returning as it normally would.

             This  is  useful  for  avoiding  explicit  loops or repeated expect statements.  The
             following example is part of a fragment to automate rlogin.  The exp_continue avoids
             having  to  write  a  second  expect statement (to look for the prompt again) if the
             rlogin prompts for a password.

                 expect {
                     Password: {
                         stty -echo
                         send_user "password (for $user) on $host: "
                         expect_user -re "(.*)\n"
                         send_user "\n"
                         send "$expect_out(1,string)\r"
                         stty echo
                         exp_continue
                     } incorrect {
                         send_user "invalid password or account\n"
                         exit
                     } timeout {
                         send_user "connection to $host timed out\n"
                         exit
                     } eof {
                         send_user \
                             "connection to host failed: $expect_out(buffer)"
                         exit
                     } -re $prompt
                 }

             For example, the following fragment might help a user guide an interaction  that  is
             already totally automated.  In this case, the terminal is put into raw mode.  If the
             user presses "+", a variable is incremented.  If "p" is pressed, several returns are
             sent  to the process, perhaps to poke it in some way, and "i" lets the user interact
             with the process, effectively stealing away control from the script.  In each  case,
             the  exp_continue  allows  the  current  expect  to  continue pattern matching after
             executing the current action.

                 stty raw -echo
                 expect_after {
                     -i $user_spawn_id
                     "p" {send "\r\r\r"; exp_continue}
                     "+" {incr foo; exp_continue}
                     "i" {interact; exp_continue}
                     "quit" exit
                 }

             By default, exp_continue resets the timeout timer.  The timer is not  restarted,  if
             exp_continue is called with the -continue_timer flag.

       expect_after [expect_args]
             works  identically to the expect_before except that if patterns from both expect and
             expect_after can match, the expect pattern is used.  See the  expect_before  command
             for more information.

       expect_background [expect_args]
             takes  the  same  arguments as expect, however it returns immediately.  Patterns are
             tested whenever new input arrives.  The pattern timeout and default are  meaningless
             to  expect_background  and are silently discarded.  Otherwise, the expect_background
             command uses expect_before and expect_after patterns just like expect does.

             When expect_background actions are being evaluated, background  processing  for  the
             same  spawn  id  is  blocked.   Background  processing  is unblocked when the action
             completes.  While  background  processing  is  blocked,  it  is  possible  to  do  a
             (foreground) expect on the same spawn id.

             It  is  not  possible  to execute an expect while an expect_background is unblocked.
             expect_background  for  a  particular  spawn  id  is  deleted  by  declaring  a  new
             expect_background  with  the  same  spawn  id.   Declaring expect_background with no
             pattern removes the given spawn id  from  the  ability  to  match  patterns  in  the
             background.

       expect_before [expect_args]
             takes  the same arguments as expect, however it returns immediately.  Pattern-action
             pairs from the most recent expect_before with the same spawn id are implicitly added
             to  any following expect commands.  If a pattern matches, it is treated as if it had
             been specified in the expect command itself, and the associated body is executed  in
             the  context  of the expect command.  If patterns from both expect_before and expect
             can match, the expect_before pattern is used.

             If no pattern is specified, the spawn id is not checked for any patterns.

             Unless overridden by a -i flag, expect_before patterns match against  the  spawn  id
             defined  at  the  time  that  the  expect_before  command was executed (not when its
             pattern is matched).

             The -info flag causes expect_before to return the  current  specifications  of  what
             patterns  it  will  match.   By  default,  it  reports  on the current spawn id.  An
             optional spawn id specification may be given for information on that spawn id.   For
             example

                 expect_before -info -i $proc

             At  most  one  spawn  id  specification may be given.  The flag -indirect suppresses
             direct spawn ids that come only from indirect specifications.

             Instead of a spawn id specification, the flag "-all" will cause "-info" to report on
             all spawn ids.

             The output of the -info flag can be reused as the argument to expect_before.

       expect_tty [expect_args]
             is  like  expect  but  it  reads  characters from /dev/tty (i.e. keystrokes from the
             user).  By default, reading is performed in cooked mode.  Thus, lines must end  with
             a  return  in  order  for expect to see them.  This may be changed via stty (see the
             stty command below).

       expect_user [expect_args]
             is like expect but it reads characters from stdin (i.e. keystrokes from  the  user).
             By default, reading is performed in cooked mode.  Thus, lines must end with a return
             in order for expect to see them.  This may be changed via stty (see the stty command
             below).

       fork  creates  a  new  process.   The  new  process is an exact copy of the current Expect
             process.  On success, fork returns 0 to the new  (child)  process  and  returns  the
             process  ID  of the child process to the parent process.  On failure (invariably due
             to lack of resources, e.g., swap space, memory),  fork  returns  -1  to  the  parent
             process, and no child process is created.

             Forked  processes exit via the exit command, just like the original process.  Forked
             processes are allowed to write to the log files.  If you do not disable debugging or
             logging in most of the processes, the result can be confusing.

             Some  pty  implementations  may  be  confused  by multiple readers and writers, even
             momentarily.  Thus, it is safest to fork before spawning processes.

       interact [string1 body1] ... [stringn [bodyn]]
             gives control of the current process to the user, so that keystrokes are sent to the
             current process, and the stdout and stderr of the current process are returned.

             String-body  pairs may be specified as arguments, in which case the body is executed
             when the corresponding string is entered.  (By default, the string is  not  sent  to
             the  current  process.)    The  interpreter command is assumed, if the final body is
             missing.

             If the arguments to the entire interact statement require more than  one  line,  all
             the  arguments  may be "braced" into one so as to avoid terminating each line with a
             backslash.  In this one case, the usual Tcl substitutions  will  occur  despite  the
             braces.

             For  example,  the  following  command  runs interact with the following string-body
             pairs defined:  When ^Z is pressed, Expect is suspended.  (The -reset flag  restores
             the  terminal modes.)  When ^A is pressed, the user sees "you typed a control-A" and
             the process is sent a ^A.  When $ is pressed, the user sees the date.   When  ^C  is
             pressed,  Expect  exits.   If  "foo"  is  entered,  the user sees "bar".  When ~~ is
             pressed, the Expect interpreter runs interactively.

                 set CTRLZ \032
                 interact {
                     -reset $CTRLZ {exec kill -STOP [pid]}
                     \001   {send_user "you typed a control-A\n";
                             send "\001"
                            }
                     $      {send_user "The date is [clock format [clock seconds]]."}
                     \003   exit
                     foo    {send_user "bar"}
                     ~~
                 }

             In string-body pairs, strings are matched in the order they are listed as arguments.
             Strings  that partially match are not sent to the current process in anticipation of
             the remainder coming.  If characters are then entered such that there can no  longer
             possibly  be  a  match, only the part of the string will be sent to the process that
             cannot possibly begin another match.  Thus, strings that are substrings  of  partial
             matches  can  match  later,  if the original strings that was attempting to be match
             ultimately fails.

             By default, string matching is exact with no wild cards.  (In contrast,  the  expect
             command  uses  glob-style patterns by default.)  The -ex flag may be used to protect
             patterns that might otherwise match interact  flags  from  doing  so.   Any  pattern
             beginning with a "-" should be protected this way.    (All strings starting with "-"
             are reserved for future options.)

             The -re flag forces the string to be interpreted as a regexp-style pattern.  In this
             case,  matching  substrings are stored in the variable interact_out similarly to the
             way expect stores its output in the  variable  expect_out.   The  -indices  flag  is
             similarly supported.

             The  pattern eof introduces an action that is executed upon end-of-file.  A separate
             eof pattern may also follow the -output flag in which case it is matched if  an  eof
             is  detected  while  writing  output.   The  default eof action is "return", so that
             interact simply returns upon any EOF.

             The pattern timeout introduces a timeout (in seconds) and action  that  is  executed
             after no characters have been read for a given time.  The timeout pattern applies to
             the most recently specified process.  There is  no  default  timeout.   The  special
             variable "timeout" (used by the expect command) has no affect on this timeout.

             For  example, the following statement could be used to autologout users who have not
             typed anything for an hour but who still get frequent system messages:

                 interact -input $user_spawn_id timeout 3600 return -output \
                     $spawn_id

             If the pattern is the keyword null, and nulls  are  allowed  (via  the  remove_nulls
             command),  the corresponding body is executed if a single ASCII 0 is matched.  It is
             not possible to match 0 bytes via glob or regexp patterns.

             Prefacing a pattern with the flag -iwrite causes the variable interact_out(spawn_id)
             to be set to the spawn_id which matched the pattern (or eof).

             Actions  such  as  break  and continue cause control structures (i.e., for, proc) to
             behave in the usual way.  However return causes interact to return  to  its  caller,
             while inter_return causes interact to cause a return in its caller.  For example, if
             "proc foo" called interact which then executed the  action  inter_return,  proc  foo
             would  return.   (This means that if interact calls interpreter interactively typing
             return will cause the interact  to  continue,  while  inter_return  will  cause  the
             interact to return to its caller.)

             During  interact,  raw  mode  is  used  so  that all characters may be passed to the
             current process.  If the current process does not catch job control signals, it will
             stop  if  sent a stop signal (by default ^Z).  To restart it, send a continue signal
             (such as by "kill -CONT <pid>").  If you really want to send a  SIGSTOP  to  such  a
             process  (by ^Z), consider spawning csh first and then running your program.  On the
             other hand, if you want to send a SIGSTOP to Expect itself, first  call  interpreter
             (perhaps by using an escape character), and then press ^Z.

             String-body  pairs  can  be  used  as  a  shorthand for avoiding having to enter the
             interpreter and execute commands interactively.  The previous terminal mode is  used
             while the body of a string-body pair is being executed.

             For  speed,  actions  execute  in  raw  mode by default.  The -reset flag resets the
             terminal to the mode it had before interact was executed (invariably, cooked  mode).
             Note  that  characters  entered  when  the  mode  is  being switched may be lost (an
             unfortunate feature of the terminal driver on some systems).  The only reason to use
             -reset is if your action depends on running in cooked mode.

             The -echo flag sends characters that match the following pattern back to the process
             that generated them as each character is read.  This may be  useful  when  the  user
             needs to see feedback from partially typed patterns.

             If  a pattern is being echoed but eventually fails to match, the characters are sent
             to the spawned process.  If the spawned process then echoes them, the user will  see
             the  characters  twice.   -echo is probably only appropriate in situations where the
             user is unlikely to not complete the pattern.  For example, the following excerpt is
             from  rftp, the recursive-ftp script, where the user is prompted to enter ~g, ~p, or
             ~l, to get, put, or list the current directory recursively.  These are so  far  away
             from  the  normal  ftp  commands,  that  the  user is unlikely to type ~ followed by
             anything else, except mistakenly, in which case, they'll probably  just  ignore  the
             result anyway.

                 interact {
                     -echo ~g {getcurdirectory 1}
                     -echo ~l {getcurdirectory 0}
                     -echo ~p {putcurdirectory}
                 }

             The  -nobuffer  flag  sends  characters  that  match the following pattern on to the
             output process as characters are read.

             This is useful when you wish to let a program echo back the pattern.   For  example,
             the  following  might  be  used  to monitor where a person is dialing (a Hayes-style
             modem).  Each time "atd" is seen the script logs the rest of the line.

                 proc lognumber {} {
                     interact -nobuffer -re "(.*)\r" return
                     puts $log "[clock format [clock seconds]]: dialed $interact_out(1,string)"
                 }

                 interact -nobuffer "atd" lognumber

             During interact, previous use of log_user is ignored.  In particular, interact  will
             force its output to be logged (sent to the standard output) since it is presumed the
             user doesn't wish to interact blindly.

             The -o flag causes any following key-body pairs to be applied to the output  of  the
             current process.  This can be useful, for example, when dealing with hosts that send
             unwanted characters during a telnet session.

             By default, interact expects the user to be writing stdin and reading stdout of  the
             Expect process itself.  The -u flag (for "user") makes interact look for the user as
             the process named by its argument (which must be a spawned id).

             This allows two unrelated processes to be joined together without using an  explicit
             loop.   To  aid  in debugging, Expect diagnostics always go to stderr (or stdout for
             certain logging and debugging information).  For the same  reason,  the  interpreter
             command will read interactively from stdin.

             For example, the following fragment creates a login process.  Then it dials the user
             (not shown), and finally connects the two together.  Of course, any process  may  be
             substituted  for  login.  A shell, for example, would allow the user to work without
             supplying an account and password.

                 spawn login
                 set login $spawn_id
                 spawn tip modem
                 # dial back out to user
                 # connect user to login
                 interact -u $login

             To send output to multiple processes, list each spawn id list prefaced by a  -output
             flag.   Input  for  a group of output spawn ids may be determined by a spawn id list
             prefaced by a -input flag.  (Both -input and -output may take lists in the same form
             as  the -i flag in the expect command, except that any_spawn_id is not meaningful in
             interact.)  All following flags and strings (or patterns) apply to this input  until
             another  -input  flag  appears.   If  no  -input  appears,  -output  implies "-input
             $user_spawn_id -output".  (Similarly, with patterns that do not  have  -input.)   If
             one  -input  is  specified,  it  overrides  $user_spawn_id.   If  a second -input is
             specified, it overrides $spawn_id.  Additional -input flags may be specified.

             The two implied input  processes  default  to  having  their  outputs  specified  as
             $spawn_id and $user_spawn_id (in reverse).  If a -input flag appears with no -output
             flag, characters from that process are discarded.

             The -i flag introduces a replacement for the current spawn_id when no  other  -input
             or -output flags are used.  A -i flag implies a -o flag.

             It  is  possible  to  change  the  processes that are being interacted with by using
             indirect spawn ids.  (Indirect spawn ids are described in the section on the  expect
             command.)   Indirect  spawn ids may be specified with the -i, -u, -input, or -output
             flags.

       interpreter  [args]
             causes the user to be interactively prompted  for  Expect  and  Tcl  commands.   The
             result of each command is printed.

             Actions  such  as  break  and continue cause control structures (i.e., for, proc) to
             behave in the usual way.  However return causes interpreter to return to its caller,
             while inter_return causes interpreter to cause a return in its caller.  For example,
             if "proc foo" called interpreter which then executed the action  inter_return,  proc
             foo  would  return.   Any other command causes interpreter to continue prompting for
             new commands.

             By default, the prompt contains two integers.  The first integer describes the depth
             of the evaluation stack (i.e., how many times Tcl_Eval has been called).  The second
             integer is the Tcl history  identifier.   The  prompt  can  be  set  by  defining  a
             procedure  called  "prompt1"  whose  return  value  becomes  the  next prompt.  If a
             statement has open quotes, parens, braces,  or  brackets,  a  secondary  prompt  (by
             default  "+> ") is issued upon newline.  The secondary prompt may be set by defining
             a procedure called "prompt2".

             During interpreter, cooked mode is used, even if the its caller was using raw mode.

             If stdin is closed, interpreter will return unless the -eof flag is used,  in  which
             case the subsequent argument is invoked.

       log_file [args] [[-a] file]
             If  a  filename  is  provided,  log_file  will  record  a  transcript of the session
             (beginning at that point) in the file.  log_file will stop recording if no  argument
             is given.  Any previous log file is closed.

             Instead  of  a filename, a Tcl file identifier may be provided by using the -open or
             -leaveopen flags.  This is similar to the spawn command.  (See spawn for more info.)

             The -a flag forces output to be logged that was suppressed by the log_user command.

             By default, the log_file command appends to old files rather than  truncating  them,
             for  the  convenience of being able to turn logging off and on multiple times in one
             session.  To truncate files, use the -noappend flag.

             The -info flag causes log_file to return a description of the most  recent  non-info
             arguments given.

       log_user -info|0|1
             By  default,  the  send/expect dialogue is logged to stdout (and a logfile if open).
             The logging to stdout is disabled by the  command  "log_user  0"  and  reenabled  by
             "log_user 1".  Logging to the logfile is unchanged.

             The  -info  flag causes log_user to return a description of the most recent non-info
             arguments given.

       match_max [-d] [-i spawn_id] [size]
             defines the size of the buffer (in bytes) used internally by expect.  With  no  size
             argument, the current size is returned.

             With the -d flag, the default size is set.  (The initial default is 2000.)  With the
             -i flag, the size is set for the named spawn id, otherwise it is set for the current
             process.

       overlay [-# spawn_id] [-# spawn_id] [...] program [args]
             executes  program  args in place of the current Expect program, which terminates.  A
             bare hyphen argument forces a hyphen in front of the command name as  if  it  was  a
             login  shell.   All spawn_ids are closed except for those named as arguments.  These
             are mapped onto the named file identifiers.

             Spawn_ids are mapped to file identifiers  for  the  new  program  to  inherit.   For
             example, the following line runs chess and allows it to be controlled by the current
             process - say, a chess master.

                 overlay -0 $spawn_id -1 $spawn_id -2 $spawn_id chess

             This is more efficient than "interact -u", however, it sacrifices the ability to  do
             programmed interaction since the Expect process is no longer in control.

             Note  that  no  controlling  terminal is provided.  Thus, if you disconnect or remap
             standard input, programs that do job control (shells, login, etc) will not  function
             properly.

       parity [-d] [-i spawn_id] [value]
             defines  whether  parity  should  be retained or stripped from the output of spawned
             processes.  If value is zero, parity is stripped,  otherwise  it  is  not  stripped.
             With no value argument, the current value is returned.

             With the -d flag, the default parity value is set.  (The initial default is 1, i.e.,
             parity is not stripped.)  With the -i flag, the parity value is set  for  the  named
             spawn id, otherwise it is set for the current process.

       remove_nulls [-d] [-i spawn_id] [value]
             defines  whether  nulls are retained or removed from the output of spawned processes
             before pattern matching or storing in the variable expect_out or  interact_out.   If
             value is 1, nulls are removed.  If value is 0, nulls are not removed.  With no value
             argument, the current value is returned.

             With the -d flag, the default value is set.  (The initial default is 1, i.e.,  nulls
             are  removed.)  With the -i flag, the value is set for the named spawn id, otherwise
             it is set for the current process.

             Whether or not nulls are removed, Expect will record  null  bytes  to  the  log  and
             stdout.

       send [-flags] string
             Sends string to the current process.  For example, the command

                 send "hello world\r"

             sends  the  characters, h e l l o <blank> w o r l d <return> to the current process.
             (Tcl includes a printf-like command (called  format)  which  can  build  arbitrarily
             complex strings.)

             Characters  are sent immediately although programs with line-buffered input will not
             read the characters until a return character is sent.  A return character is denoted
             "\r".

             The  --  flag  forces  the next argument to be interpreted as a string rather than a
             flag.  Any string can be preceded by "--" whether or not it actually  looks  like  a
             flag.   This provides a reliable mechanism to specify variable strings without being
             tripped up by those that accidentally look like flags.  (All strings  starting  with
             "-" are reserved for future options.)

             The -i flag declares that the string be sent to the named spawn_id.  If the spawn_id
             is user_spawn_id, and the terminal is in  raw  mode,  newlines  in  the  string  are
             translated to return-newline sequences so that they appear as if the terminal was in
             cooked mode.  The -raw flag disables this translation.

             The -null flag sends null characters (0 bytes).  By default, one null is  sent.   An
             integer may follow the -null to indicate how many nulls to send.

             The  -break flag generates a break condition.  This only makes sense if the spawn id
             refers to a tty device opened via "spawn -open".  If you have spawned a process such
             as tip, you should use tip's convention for generating a break.

             The -s flag forces output to be sent "slowly", thus avoid the common situation where
             a computer outtypes an input buffer that was designed for a human  who  would  never
             outtype  the  same  buffer.   This output is controlled by the value of the variable
             "send_slow" which takes a two element list.  The first element is  an  integer  that
             describes  the  number  of  bytes  to send atomically.  The second element is a real
             number that describes the number of seconds  by  which  the  atomic  sends  must  be
             separated.   For  example,  "set  send_slow {10 .001}" would force "send -s" to send
             strings with 1 millisecond in between each 10 characters sent.

             The -h flag forces output to be  sent  (somewhat)  like  a  human  actually  typing.
             Human-like  delays  appear  between  the characters.  (The algorithm is based upon a
             Weibull distribution, with modifications to suit this particular application.)  This
             output  is  controlled  by the value of the variable "send_human" which takes a five
             element list.  The first two elements are average interarrival time of characters in
             seconds.   The  first  is  used  by default.  The second is used at word endings, to
             simulate the subtle pauses that occasionally occur at such transitions.   The  third
             parameter  is  a  measure of variability where .1 is quite variable, 1 is reasonably
             variable, and 10 is quite invariable.  The extremes are 0 to infinity.  The last two
             parameters  are, respectively, a minimum and maximum interarrival time.  The minimum
             and maximum are used last and "clip" the final time.  The ultimate  average  can  be
             quite  different  from  the  given  average  if  the minimum and maximum clip enough
             values.

             As an example, the following command emulates a fast and consistent typist:

                 set send_human {.1 .3 1 .05 2}
                 send -h "I'm hungry.  Let's do lunch."

             while the following might be more suitable after a hangover:

                 set send_human {.4 .4 .2 .5 100}
                 send -h "Goodd party lash night!"

             Note that errors are not  simulated,  although  you  can  set  up  error  correction
             situations yourself by embedding mistakes and corrections in a send argument.

             The  flags  for sending null characters, for sending breaks, for forcing slow output
             and for human-style output are mutually exclusive. Only the one specified last  will
             be used. Furthermore, no string argument can be specified with the flags for sending
             null characters or breaks.

             It is a good idea to precede the first send to a process by an expect.  expect  will
             wait  for the process to start, while send cannot.  In particular, if the first send
             completes before the process starts running, you run the risk of  having  your  data
             ignored.   In situations where interactive programs offer no initial prompt, you can
             precede send by a delay as in:

                 # To avoid giving hackers hints on how to break in,
                 # this system does not prompt for an external password.
                 # Wait for 5 seconds for exec to complete
                 spawn telnet very.secure.gov
                 sleep 5
                 send password\r

             exp_send is an alias for send.  If you are using Expectk or some  other  variant  of
             Expect  in  the  Tk  environment,  send  is  defined by Tk for an entirely different
             purpose.  exp_send is provided  for  compatibility  between  environments.   Similar
             aliases are provided for other Expect's other send commands.

       send_error [-flags] string
             is  like  send,  except  that  the  output is sent to stderr rather than the current
             process.

       send_log [--] string
             is like send, except that the string is only sent to the log  file  (see  log_file.)
             The arguments are ignored if no log file is open.

       send_tty [-flags] string
             is  like  send,  except  that the output is sent to /dev/tty rather than the current
             process.

       send_user [-flags] string
             is like send, except that the output is sent  to  stdout  rather  than  the  current
             process.

       sleep seconds
             causes  the  script  to  sleep  for  the  given number of seconds.  Seconds may be a
             decimal number.  Interrupts (and Tk events if you are using Expectk)  are  processed
             while Expect sleeps.

       spawn [args] program [args]
             creates  a  new  process  running  program  args.   Its stdin, stdout and stderr are
             connected to Expect, so that they may be read and written by other Expect  commands.
             The  connection  is  broken by close or if the process itself closes any of the file
             identifiers.

             When a process is started by spawn, the variable spawn_id is  set  to  a  descriptor
             referring  to  that  process.   The  process described by spawn_id is considered the
             current process.  spawn_id may be read or written, in effect providing job control.

             user_spawn_id is a global variable containing a descriptor which refers to the user.
             For example, when spawn_id is set to this value, expect behaves like expect_user.

             error_spawn_id  is  a  global  variable  containing a descriptor which refers to the
             standard error.  For example, when spawn_id is set to this value, send behaves  like
             send_error.

             tty_spawn_id  is a global variable containing a descriptor which refers to /dev/tty.
             If /dev/tty does not  exist  (such  as  in  a  cron,  at,  or  batch  script),  then
             tty_spawn_id is not defined.  This may be tested as:

                 if {[info vars tty_spawn_id]} {
                     # /dev/tty exists
                 } else {
                     # /dev/tty doesn't exist
                     # probably in cron, batch, or at script
                 }

             spawn  returns  the  UNIX process id.  If no process is spawned, 0 is returned.  The
             variable spawn_out(slave,name) is set to the name of the pty slave device.

             By default, spawn echoes the command name and arguments.   The  -noecho  flag  stops
             spawn from doing this.

             The  -console  flag  causes  console output to be redirected to the spawned process.
             This is not supported on all systems.

             Internally, spawn uses a pty, initialized the same way as the user's tty.   This  is
             further  initialized so that all settings are "sane" (according to stty(1)).  If the
             variable stty_init is defined, it is interpreted in the style of stty  arguments  as
             further  configuration.  For example, "set stty_init raw" will cause further spawned
             processes's terminals to start in raw mode.   -nottycopy  skips  the  initialization
             based on the user's tty.  -nottyinit skips the "sane" initialization.

             Normally,  spawn  takes  little  time  to  execute.   If  you  notice spawn taking a
             significant amount of time, it is probably encountering ptys  that  are  wedged.   A
             number  of  tests  are  run  on  ptys  to avoid entanglements with errant processes.
             (These take 10 seconds per wedged pty.)  Running Expect with the -d option will show
             if Expect is encountering many ptys in odd states.  If you cannot kill the processes
             to which these ptys are attached, your only recourse may be to reboot.

             If program cannot be spawned successfully because exec(2) fails (e.g.  when  program
             doesn't  exist),  an  error  message will be returned by the next interact or expect
             command as if program had run and  produced  the  error  message  as  output.   This
             behavior is a natural consequence of the implementation of spawn.  Internally, spawn
             forks, after which the spawned process has no way to communicate with  the  original
             Expect process except by communication via the spawn_id.

             The  -open  flag causes the next argument to be interpreted as a Tcl file identifier
             (i.e., returned by open.)  The spawn id can then be used as if  it  were  a  spawned
             process.   (The  file identifier should no longer be used.)  This lets you treat raw
             devices, files, and pipelines as spawned  processes  without  using  a  pty.   0  is
             returned  to  indicate  there  is no associated process.  When the connection to the
             spawned process is closed, so is the Tcl file identifier.  The  -leaveopen  flag  is
             similar  to  -open except that -leaveopen causes the file identifier to be left open
             even after the spawn id is closed.

             The -pty flag causes a pty to be opened but no process spawned.  0  is  returned  to
             indicate there is no associated process.  Spawn_id is set as usual.

             The  variable  spawn_out(slave,fd)  is set to a file identifier corresponding to the
             pty slave.  It can be closed using "close -slave".

             The -ignore flag names a signal to be ignored in the  spawned  process.   Otherwise,
             signals  get the default behavior.  Signals are named as in the trap command, except
             that each signal requires a separate flag.

       strace level
             causes following statements to be  printed  before  being  executed.   (Tcl's  trace
             command traces variables.)  level indicates how far down in the call stack to trace.
             For example, the following command runs Expect while tracing the first 4  levels  of
             calls, but none below that.

                 expect -c "strace 4" script.exp

             The  -info  flag  causes  strace to return a description of the most recent non-info
             arguments given.

       stty args
             changes terminal modes similarly to the external stty command.

             By default, the controlling terminal is accessed.  Other terminals can  be  accessed
             by appending "< /dev/tty..." to the command.  (Note that the arguments should not be
             grouped into a single argument.)

             Requests for status return it as the  result  of  the  command.   If  no  status  is
             requested  and  the controlling terminal is accessed, the previous status of the raw
             and echo attributes are returned in a form which can later be used by the command.

             For example, the arguments raw or -cooked put  the  terminal  into  raw  mode.   The
             arguments  -raw or cooked put the terminal into cooked mode.  The arguments echo and
             -echo put the terminal into echo and noecho mode respectively.

             The following example illustrates how to temporarily disable echoing.  This could be
             used in otherwise-automatic scripts to avoid embedding passwords in them.  (See more
             discussion on this under EXPECT HINTS below.)

                 stty -echo
                 send_user "Password: "
                 expect_user -re "(.*)\n"
                 set password $expect_out(1,string)
                 stty echo

       system args
             gives args to sh(1) as input, just as if it had been  typed  as  a  command  from  a
             terminal.   Expect  waits  until the shell terminates.  The return status from sh is
             handled the same way that exec handles its return status.

             In contrast to exec which redirects stdin and stdout to the script, system  performs
             no  redirection  (other  than  that  indicated  by  the string itself).  Thus, it is
             possible to use programs which must talk directly to /dev/tty.  For the same reason,
             the results of system are not recorded in the log.

       timestamp [args]
             returns  a  timestamp.   With no arguments, the number of seconds since the epoch is
             returned.

             The -format flag introduces a string which is returned but with  substitutions  made
             according  to  the  POSIX  rules  for  strftime.   For  example %a is replaced by an
             abbreviated weekday name (i.e., Sat).  Others are:
                 %a      abbreviated weekday name
                 %A      full weekday name
                 %b      abbreviated month name
                 %B      full month name
                 %c      date-time as in: Wed Oct  6 11:45:56 1993
                 %d      day of the month (01-31)
                 %H      hour (00-23)
                 %I      hour (01-12)
                 %j      day (001-366)
                 %m      month (01-12)
                 %M      minute (00-59)
                 %p      am or pm
                 %S      second (00-61)
                 %u      day (1-7, Monday is first day of week)
                 %U      week (00-53, first Sunday is first day of week one)
                 %V      week (01-53, ISO 8601 style)
                 %w      day (0-6)
                 %W      week (00-53, first Monday is first day of week one)
                 %x      date-time as in: Wed Oct  6 1993
                 %X      time as in: 23:59:59
                 %y      year (00-99)
                 %Y      year as in: 1993
                 %Z      timezone (or nothing if not determinable)
                 %%      a bare percent sign

             Other % specifications are undefined.   Other  characters  will  be  passed  through
             untouched.  Only the C locale is supported.

             The  -seconds  flag  introduces  a number of seconds since the epoch to be used as a
             source from which to format.  Otherwise, the current time is used.

             The -gmt flag forces timestamp output to use the GMT timezone.  With  no  flag,  the
             local timezone is used.

       trap [[command] signals]
             causes  the  given  command  to  be executed upon future receipt of any of the given
             signals.  The command is executed in the global scope.  If command  is  absent,  the
             signal  action  is  returned.   If  command  is  the string SIG_IGN, the signals are
             ignored.  If command is the string SIG_DFL, the signals are  result  to  the  system
             default.   signals  is  either a single signal or a list of signals.  Signals may be
             specified numerically or symbolically as per signal(3).  The  "SIG"  prefix  may  be
             omitted.

             With  no  arguments (or the argument -number), trap returns the signal number of the
             trap command currently being executed.

             The -code flag uses the return code of the command in place of whatever code Tcl was
             about to return when the command originally started running.

             The  -interp flag causes the command to be evaluated using the interpreter active at
             the time the command started running rather than when the trap was declared.

             The -name flag causes the trap command to return the signal name of the trap command
             currently being executed.

             The  -max  flag causes the trap command to return the largest signal number that can
             be set.

             For example, the command "trap {send_user "Ouch!"} SIGINT" will print "Ouch!"   each
             time the user presses ^C.

             By default, SIGINT (which can usually be generated by pressing ^C) and SIGTERM cause
             Expect to exit.  This is due to the following trap, created by default  when  Expect
             starts.

                 trap exit {SIGINT SIGTERM}

             If  you  use  the  -D  flag  to start the debugger, SIGINT is redefined to start the
             interactive debugger.  This is due to the following trap:

                 trap {exp_debug 1} SIGINT

             The  debugger  trap  can  be   changed   by   setting   the   environment   variable
             EXPECT_DEBUG_INIT to a new trap command.

             You  can,  of  course,  override  both of these just by adding trap commands to your
             script.  In particular, if you have your own "trap exit SIGINT", this will  override
             the  debugger trap.  This is useful if you want to prevent users from getting to the
             debugger at all.

             If you want to define your own trap on SIGINT but still trap to the debugger when it
             is running, use:

                 if {![exp_debug]} {trap mystuff SIGINT}

             Alternatively, you can trap to the debugger using some other signal.

             trap  will not let you override the action for SIGALRM as this is used internally to
             Expect.  The disconnect command sets SIGALRM to SIG_IGN (ignore).  You can  reenable
             this as long as you disable it during subsequent spawn commands.

             See signal(3) for more info.

       wait [args]
             delays until a spawned process (or the current process if none is named) terminates.

             wait  normally returns a list of four integers.  The first integer is the pid of the
             process that was waited upon.  The second integer is  the  corresponding  spawn  id.
             The  third  integer is -1 if an operating system error occurred, or 0 otherwise.  If
             the third integer was 0, the fourth integer is the status returned  by  the  spawned
             process.   If the third integer was -1, the fourth integer is the value of errno set
             by the operating system.  The global variable errorCode is also set.

             Additional elements may appear at the  end  of  the  return  value  from  wait.   An
             optional  fifth  element  identifies  a  class  of information.  Currently, the only
             possible value for this element is CHILDKILLED in which case the next two values are
             the C-style signal name and a short textual description.

             The  -i  flag  declares the process to wait corresponding to the named spawn_id (NOT
             the process id).  Inside a SIGCHLD handler, it is possible to wait for  any  spawned
             process by using the spawn id -1.

             The  -nowait  flag  causes  the  wait to return immediately with the indication of a
             successful wait.  When the process exits (later), it  will  automatically  disappear
             without the need for an explicit wait.

             The  wait command may also be used wait for a forked process using the arguments "-i
             -1".  Unlike its use with spawned processes, this command can  be  executed  at  any
             time.   There is no control over which process is reaped.  However, the return value
             can be checked for the process id.

LIBRARIES

       Expect automatically knows about two built-in libraries for  Expect  scripts.   These  are
       defined  by the directories named in the variables exp_library and exp_exec_library.  Both
       are meant to contain utility files that can be used by other scripts.

       exp_library   contains   architecture-independent   files.    exp_exec_library    contains
       architecture-dependent  files.   Depending on your system, both directories may be totally
       empty.  The existence of the file  $exp_exec_library/cat-buffers  describes  whether  your
       /bin/cat buffers by default.

PRETTY-PRINTING

       A  vgrind definition is available for pretty-printing Expect scripts.  Assuming the vgrind
       definition supplied with the Expect distribution is correctly installed, you  can  use  it
       as:

           vgrind -lexpect file

EXAMPLES

       It  many  not  be  apparent how to put everything together that the man page describes.  I
       encourage you to read and try out the examples in the  example  directory  of  the  Expect
       distribution.   Some of them are real programs.  Others are simply illustrative of certain
       techniques, and of course, a couple are just quick hacks.  The INSTALL file  has  a  quick
       overview of these programs.

       The  Expect  papers  (see  SEE  ALSO)  are  also  useful.   While  some  papers use syntax
       corresponding to earlier versions of Expect, the accompanying rationales are  still  valid
       and go into a lot more detail than this man page.

CAVEATS

       Extensions  may  collide  with Expect's command names.  For example, send is defined by Tk
       for an entirely different purpose.  For this reason, most of the Expect commands are  also
       available  as  "exp_XXXX".  Commands and variables beginning with "exp", "inter", "spawn",
       and "timeout" do not have aliases.  Use the  extended  command  names  if  you  need  this
       compatibility between environments.

       Expect  takes a rather liberal view of scoping.  In particular, variables read by commands
       specific to the Expect program will be sought first from  the  local  scope,  and  if  not
       found, in the global scope.  For example, this obviates the need to place "global timeout"
       in every procedure you write that uses expect.  On the other hand, variables  written  are
       always  in  the  local scope (unless a "global" command has been issued).  The most common
       problem this causes is when spawn is executed in  a  procedure.   Outside  the  procedure,
       spawn_id  no  longer exists, so the spawned process is no longer accessible simply because
       of scoping.  Add a "global spawn_id" to such a procedure.

       If you cannot enable the multispawning capability  (i.e.,  your  system  supports  neither
       select  (BSD  *.*),  poll  (SVR>2), nor something equivalent), Expect will only be able to
       control a single process at a time.  In this case, do not attempt  to  set  spawn_id,  nor
       should  you  execute  processes via exec while a spawned process is running.  Furthermore,
       you will not be able to expect from multiple processes (including the user as one) at  the
       same time.

       Terminal parameters can have a big effect on scripts.  For example, if a script is written
       to look for echoing, it will misbehave if echoing is turned off.  For this reason,  Expect
       forces  sane  terminal  parameters  by  default.   Unfortunately,  this  can  make  things
       unpleasant for other programs.  As an example, the emacs shell wants to change the "usual"
       mappings: newlines get mapped to newlines instead of carriage-return newlines, and echoing
       is disabled.  This allows one to use emacs to edit the input line.  Unfortunately,  Expect
       cannot possibly guess this.

       You  can  request that Expect not override its default setting of terminal parameters, but
       you must then be very careful when writing scripts for such environments.  In the case  of
       emacs, avoid depending upon things like echoing and end-of-line mappings.

       The  commands  that  accepted arguments braced into a single list (the expect variants and
       interact) use a heuristic to decide if the list is actually one  argument  or  many.   The
       heuristic  can  fail  only  in  the  case  when  the list actually does represent a single
       argument which has multiple embedded \n's with  non-whitespace  characters  between  them.
       This seems sufficiently improbable, however the argument "-nobrace" can be used to force a
       single argument to be handled as a single argument.  This could conceivably be  used  with
       machine-generated Expect code.  Similarly, -brace forces a single argument to be handle as
       multiple patterns/actions.

BUGS

       It was really tempting to name the program  "sex"  (for  either  "Smart  EXec"  or  "Send-
       EXpect"), but good sense (or perhaps just Puritanism) prevailed.

       On  some systems, when a shell is spawned, it complains about not being able to access the
       tty but runs anyway.  This means your system has a mechanism for gaining  the  controlling
       tty that Expect doesn't know about.  Please find out what it is, and send this information
       back to me.

       Ultrix 4.1 (at least the latest versions around here) considers timeouts of above  1000000
       to be equivalent to 0.

       Digital  UNIX  4.0A (and probably other versions) refuses to allocate ptys if you define a
       SIGCHLD handler.  See grantpt page for more info.

       IRIX 6.0 does not handle pty permissions correctly so that if Expect attempts to  allocate
       a pty previously used by someone else, it fails.  Upgrade to IRIX 6.1.

       Telnet  (verified  only  under  SunOS  4.1.2) hangs if TERM is not set.  This is a problem
       under cron, at and in cgi scripts, which do not  define  TERM.   Thus,  you  must  set  it
       explicitly - to what type is usually irrelevant.  It just has to be set to something!  The
       following probably suffices for most cases.

           set env(TERM) vt100

       Tip (verified only under BSDI BSD/OS 3.1 i386) hangs if SHELL and HOME are not set.   This
       is  a  problem  under  cron,  at and in cgi scripts, which do not define these environment
       variables.  Thus, you must set them explicitly - to what type is usually  irrelevant.   It
       just has to be set to something!  The following probably suffices for most cases.

           set env(SHELL) /bin/sh
           set env(HOME) /usr/bin

       Some implementations of ptys are designed so that the kernel throws away any unread output
       after 10 to 15 seconds (actual number is implementation-dependent) after the  process  has
       closed the file descriptor.  Thus Expect programs such as

           spawn date
           sleep 20
           expect

       will  fail.   To  avoid this, invoke non-interactive programs with exec rather than spawn.
       While such situations are conceivable, in practice I have never encountered a situation in
       which the final output of a truly interactive program would be lost due to this behavior.

       On  the  other  hand,  Cray UNICOS ptys throw away any unread output immediately after the
       process has closed the file descriptor.  I have reported this to Cray and they are working
       on a fix.

       Sometimes  a  delay  is  required  between  a  prompt  and  a response, such as when a tty
       interface is changing UART settings or matching baud rates by looking for start/stop bits.
       Usually,  all this is require is to sleep for a second or two.  A more robust technique is
       to retry until the hardware is ready to receive input.  The following  example  uses  both
       strategies:

           send "speed 9600\r";
           sleep 1
           expect {
               timeout {send "\r"; exp_continue}
               $prompt
           }

       trap  -code  will  not work with any command that sits in Tcl's event loop, such as sleep.
       The problem is that in the event loop, Tcl discards the  return  codes  from  async  event
       handlers.   A  workaround  is  to  set  a  flag  in  the  trap  code.  Then check the flag
       immediately after the command (i.e., sleep).

       The expect_background command ignores -timeout arguments and has no concept of timeouts in
       general.

EXPECT HINTS

       There  are  a  couple  of  things  about  Expect  that may be non-intuitive.  This section
       attempts to address some of these things with a couple of suggestions.

       A common expect problem is how to recognize shell prompts.   Since  these  are  customized
       differently  by differently people and different shells, portably automating rlogin can be
       difficult without knowing the prompt.  A reasonable convention is to have  users  store  a
       regular  expression  describing  their  prompt  (in  particular,  the  end  of  it) in the
       environment  variable  EXPECT_PROMPT.   Code  like  the  following  can   be   used.    If
       EXPECT_PROMPT doesn't exist, the code still has a good chance of functioning correctly.

           set prompt "(%|#|\\$) $"          ;# default prompt
           catch {set prompt $env(EXPECT_PROMPT)}

           expect -re $prompt

       I  encourage  you  to write expect patterns that include the end of whatever you expect to
       see.  This avoids the possibility of answering a question before seeing the entire  thing.
       In  addition,  while you may well be able to answer questions before seeing them entirely,
       if you answer early,  your answer may appear echoed back in the middle  of  the  question.
       In other words, the resulting dialogue will be correct but look scrambled.

       Most  prompts  include  a space character at the end.  For example, the prompt from ftp is
       'f', 't', 'p', '>' and <blank>.  To match this prompt, you must account for each of  these
       characters.   It  is  a  common  mistake  not  to  include  the  blank.   Put the blank in
       explicitly.

       If you use a pattern of the form X*, the * will match all the output received from the end
       of  X  to  the  last  thing received.  This sounds intuitive but can be somewhat confusing
       because the phrase "last thing received" can vary depending upon the speed of the computer
       and the processing of I/O both by the kernel and the device driver.

       In particular, humans tend to see program output arriving in huge chunks (atomically) when
       in reality most programs produce output one line at a time.  Assuming this  is  the  case,
       the  * in the pattern of the previous paragraph may only match the end of the current line
       even though there seems to be more, because at the time of the  match  that  was  all  the
       output that had been received.

       expect  has  no  way  of  knowing  that  further  output  is  coming  unless  your pattern
       specifically accounts for it.

       Even depending on line-oriented buffering is unwise.  Not only  do  programs  rarely  make
       promises  about  the  type  of  buffering they do, but system indigestion can break output
       lines up so that lines break at seemingly random places.  Thus, if  you  can  express  the
       last few characters of a prompt when writing patterns, it is wise to do so.

       If  you  are  waiting  for a pattern in the last output of a program and the program emits
       something else instead, you will not be able to detect that with the timeout keyword.  The
       reason  is that expect will not timeout - instead it will get an eof indication.  Use that
       instead.  Even better, use both.  That way if that line is ever moved  around,  you  won't
       have to edit the line itself.

       Newlines  are  usually converted to carriage return, linefeed sequences when output by the
       terminal driver.  Thus, if you want a pattern that explicitly matches the two lines, from,
       say, printf("foo\nbar"), you should use the pattern "foo\r\nbar".

       A  similar  translation occurs when reading from the user, via expect_user.  In this case,
       when you press return, it will be translated to a newline.  If Expect then passes that  to
       a  program  which  sets  its  terminal  to  raw mode (like telnet), there is going to be a
       problem, as the program expects a true return.  (Some programs are actually  forgiving  in
       that   they   will   automatically   translate  newlines  to  returns,  but  most  don't.)
       Unfortunately, there is no way to find out that a program put its terminal into raw mode.

       Rather than manually replacing newlines with returns, the solution is to use  the  command
       "stty raw", which will stop the translation.  Note, however, that this means that you will
       no longer get the cooked line-editing features.

       interact implicitly sets your terminal to raw mode so this problem will not arise then.

       It is often useful to store passwords (or other private information)  in  Expect  scripts.
       This  is  not  recommended  since  anything that is stored on a computer is susceptible to
       being accessed by anyone.  Thus, interactively prompting for passwords from a script is  a
       smarter  idea than embedding them literally.  Nonetheless, sometimes such embedding is the
       only possibility.

       Unfortunately, the UNIX file system has no  direct  way  of  creating  scripts  which  are
       executable  but  unreadable.   Systems  which  support setgid shell scripts may indirectly
       simulate this as follows:

       Create the Expect script (that contains the secret data) as usual.  Make  its  permissions
       be  750  (-rwxr-x---) and owned by a trusted group, i.e., a group which is allowed to read
       it.  If necessary, create a new group for this purpose.  Next,  create  a  /bin/sh  script
       with permissions 2751 (-rwxr-s--x) owned by the same group as before.

       The  result is a script which may be executed (and read) by anyone.  When invoked, it runs
       the Expect script.

SEE ALSO

       Tcl(3), libexpect(3)
       "Exploring Expect: A Tcl-Based Toolkit for Automating Interactive Programs" by Don  Libes,
       pp. 602, ISBN 1-56592-090-2, O'Reilly and Associates, 1995.
       "expect:  Curing  Those Uncontrollable Fits of Interactivity" by Don Libes, Proceedings of
       the Summer 1990 USENIX Conference, Anaheim, California, June 11-15, 1990.
       "Using expect to Automate System Administration Tasks" by Don Libes,  Proceedings  of  the
       1990  USENIX  Large  Installation  Systems  Administration  Conference,  Colorado Springs,
       Colorado, October 17-19, 1990.
       "Tcl: An Embeddable Command Language" by John Ousterhout, Proceedings of the  Winter  1990
       USENIX Conference, Washington, D.C., January 22-26, 1990.
       "expect:  Scripts  for  Controlling Interactive Programs" by Don Libes, Computing Systems,
       Vol. 4, No. 2, University of California Press Journals, November 1991.
       "Regression  Testing  and  Conformance  Testing  Interactive  Programs",  by  Don   Libes,
       Proceedings  of  the  Summer  1992  USENIX  Conference, pp. 135-144, San Antonio, TX, June
       12-15, 1992.
       "Kibitz - Connecting Multiple Interactive Programs Together", by  Don  Libes,  Software  -
       Practice & Experience, John Wiley & Sons, West Sussex, England, Vol. 23, No. 5, May, 1993.
       "A  Debugger for Tcl Applications", by Don Libes, Proceedings of the 1993 Tcl/Tk Workshop,
       Berkeley, CA, June 10-11, 1993.

AUTHOR

       Don Libes, National Institute of Standards and Technology

ACKNOWLEDGMENTS

       Thanks to John Ousterhout for Tcl, and Scott  Paisley  for  inspiration.   Thanks  to  Rob
       Savoye for Expect's autoconfiguration code.

       The  HISTORY file documents much of the evolution of expect.  It makes interesting reading
       and might give you further insight to this software.  Thanks to the people mentioned in it
       who sent me bug fixes and gave other assistance.

       Design  and  implementation  of  Expect was paid for in part by the U.S. government and is
       therefore in the public domain.  However the author and NIST would  like  credit  if  this
       program and documentation or portions of them are used.

                                         29 December 1994                               EXPECT(1)