Provided by: texlive-base_2017.20180305-1_all 
NAME
fmtutil - manage TeX formats and Metafont bases, per-user
fmtutil-sys - manage TeX formats and Metafont bases, system-wide
mktexfmt - create a TeX format or Metafont base
SYNOPSIS
fmtutil [-user|-sys] [OPTION] ... [COMMAND]
fmtutil-sys [OPTION] ... [COMMAND]
fmtutil-user [OPTION] ... [COMMAND]
mktexfmt FORMAT.fmt|BASE.base|FMTNAME.EXT
DESCRIPTION
fmtutil version r43794 (2017-04-15 02:12:54 +0200)
Rebuild and manage TeX fmts and Metafont bases, collectively called "formats" here. (MetaPost no longer
uses the past-equivalent "mems".)
If the command name ends in mktexfmt, only one format can be created. The only options supported are
--help and --version, and the command line must be either a format name, with extension, or a plain name
that is passed as the argument to --byfmt (see below). The full name of the generated file (if any) is
written to stdout, and nothing else.
If not operating in mktexfmt mode, exactly one command must be given, extensions should generally not be
specified, no non-option arguments are allowed, and multiple formats can be generated, as follows.
By default, the return status is zero if all formats requested are successfully built, else nonzero.
OPTIONS
--sys use TEXMFSYS{VAR,CONFIG}
--user use TEXMF{VAR,CONFIG}
--cnffile FILE
read FILE instead of fmtutil.cnf (can be given multiple times, in which case all the files are
used)
--fmtdir DIR
write formats under DIR instead of TEXMF[SYS]VAR
--no-engine-subdir
don't use engine-specific subdir of the fmtdir
--no-error-if-no-format exit successfully if no format is selected
--no-error-if-no-engine=ENGINE1,ENGINE2,...
exit successfully even if a required engine
is missing, if it is included in the list.
--no-strict
exit successfully even if a format fails to build
--nohash
don't update ls-R files
--recorder
pass the -recorder option and save .fls files
--quiet
be silent
--catcfg
(does nothing, exists for compatibility)
--dolinks
(does nothing, exists for compatibility)
--force
(does nothing, exists for compatibility)
--test (does nothing, exists for compatibility)
Commands:
--all recreate all format files
--missing
create all missing format files
--refresh
recreate only existing format files
--byengine ENGINE
(re)create formats built with ENGINE
--byfmt FORMAT
(re)create format FORMAT
--byhyphen HYPHENFILE
(re)create formats that depend on HYPHENFILE
--enablefmt
FORMAT[/ENGINE] enable FORMAT, as built with ENGINE
--disablefmt FORMAT[/ENGINE] disable FORMAT, as built with ENGINE
If multiple formats have the same name and
different engines, /ENGINE specifier is required.
--listcfg
list (enabled and disabled) configurations, filtered to available formats
--showhyphen FORMAT
print name of hyphen file for FORMAT
--version
show version information and exit
--help show this message and exit
ENVIRONMENT
Explanation of trees and files normally used:
If --cnffile is specified on the command line (possibly multiple times), its value(s) are used.
Otherwise, fmtutil reads all the fmtutil.cnf files found by running `kpsewhich -all fmtutil.cnf',
in the order returned by kpsewhich.
In any case, if multiple fmtutil.cnf files are found, all the format definitions found in all the
fmtutil.cnf files are merged.
Thus, if fmtutil.cnf files are present in all trees, and the default layout is used as shipped
with TeX Live, the following files are read, in the given order.
For fmtutil-sys:
TEXMFSYSCONFIG $TEXLIVE/YYYY/texmf-config/web2c/fmtutil.cnf
TEXMFSYSVAR $TEXLIVE/YYYY/texmf-var/web2c/fmtutil.cnf
TEXMFLOCAL $TEXLIVE/texmf-local/web2c/fmtutil.cnf
TEXMFDIST $TEXLIVE/YYYY/texmf-dist/web2c/fmtutil.cnf
For fmtutil-user:
TEXMFCONFIG $HOME/.texliveYYYY/texmf-config/web2c/fmtutil.cnf
TEXMFVAR $HOME/.texliveYYYY/texmf-var/web2c/fmtutil.cnf
TEXMFHOME $HOME/texmf/web2c/fmtutil.cnf
TEXMFSYSCONFIG $TEXLIVE/YYYY/texmf-config/web2c/fmtutil.cnf
TEXMFSYSVAR $TEXLIVE/YYYY/texmf-var/web2c/fmtutil.cnf
TEXMFLOCAL $TEXLIVE/texmf-local/web2c/fmtutil.cnf
TEXMFDIST $TEXLIVE/YYYY/texmf-dist/web2c/fmtutil.cnf
(where YYYY is the TeX Live release version).
According to the actions, fmtutil might write to one of the given files or create a new
fmtutil.cnf, described further below.
Where formats are written:
By default, format files are (re)written in TEXMFSYSVAR/ENGINE by fmtutil-sys, and TEXMFVAR/ENGINE
by fmtutil, where /ENGINE is a subdirectory named for the engine used, such as "pdftex".
If the --fmtdir=DIR option is specified, DIR is used instead of TEXMF[SYS]VAR, but the /ENGINE
subdir is still used by default.
In any case, if the --no-engine-subdir option is specified, the /ENGINE subdir is omitted.
Where configuration changes are saved:
If config files are given on the command line, then the first one given will be used to save any
changes from --enable or --disable. If the config files are taken from kpsewhich output, then the
algorithm is more complex:
1) If $TEXMFCONFIG/web2c/fmtutil.cnf or $TEXMFHOME/web2c/fmtutil.cnf appears in the list of used
files, then the one listed first by kpsewhich --all (equivalently, the one returned by kpsewhich
fmtutil.cnf), is used.
2) If neither of the above two are present and changes are made, a new config file is created in
$TEXMFCONFIG/web2c/fmtutil.cnf.
In general, the idea is that if a given config file is not writable, a higher-level one can be
used. That way, the distribution's settings can be overridden system-wide using TEXMFLOCAL, and
system settings can be overridden again in a particular user's TEXMFHOME.
Resolving multiple definitions of a format:
If a format is defined in more than one config file, then the definition coming from the
first-listed fmtutil.cnf is used.
Disabling formats:
fmtutil.cnf files with higher priority (listed earlier) can disable formats in lower priority
(listed later) fmtutil.cnf files by writing a line like
#! <fmtname> <enginename> <hyphen> <args>
in the higher-priority fmtutil.cnf file.
The #! must be at the
beginning of the line, with at least one space or tab afterward, and there must be whitespace
between each word on the list.
For example, you can disable the luajitlatex format by creating the file
$TEXMFCONFIG/web2c/fmtutil.cnf with the line
#! luajitlatex luajittex language.dat,language.dat.lua lualatex.ini
(As it happens, the luajittex-related formats are precisely why the --no-error-if-no-engine option
exists, since luajittex cannot be compiled on all platforms.)
fmtutil-user (fmtutil -user) vs. fmtutil-sys (fmtutil -sys):
When fmtutil-sys is run or the command line option -sys is used, TEXMFSYSCONFIG and TEXMFSYSVAR
are used instead of TEXMFCONFIG and TEXMFVAR, respectively. This is the primary difference
between fmtutil-sys and fmtutil-user.
See http://tug.org/texlive/scripts-sys-user.html for details.
Other locations may be used if you give them on the command line, or these trees don't exist, or
you are not using the original TeX Live.
Supporting development binaries
If an engine name ends with "-dev", formats are created in the respective directory with the -dev
stripped. This allows for easily running development binaries in parallel with the released
binaries.
REPORTING BUGS
Report bugs to: tex-live@tug.org TeX Live home page: <http://tug.org/texlive/>