Provided by: git-man_2.17.1-1ubuntu0.18_all 
NAME
git-daemon - A really simple server for Git repositories
SYNOPSIS
git daemon [--verbose] [--syslog] [--export-all]
[--timeout=<n>] [--init-timeout=<n>] [--max-connections=<n>]
[--strict-paths] [--base-path=<path>] [--base-path-relaxed]
[--user-path | --user-path=<path>]
[--interpolated-path=<pathtemplate>]
[--reuseaddr] [--detach] [--pid-file=<file>]
[--enable=<service>] [--disable=<service>]
[--allow-override=<service>] [--forbid-override=<service>]
[--access-hook=<path>] [--[no-]informative-errors]
[--inetd |
[--listen=<host_or_ipaddr>] [--port=<n>]
[--user=<user> [--group=<group>]]]
[--log-destination=(stderr|syslog|none)]
[<directory>...]
DESCRIPTION
A really simple TCP Git daemon that normally listens on port "DEFAULT_GIT_PORT" aka 9418.
It waits for a connection asking for a service, and will serve that service if it is
enabled.
It verifies that the directory has the magic file "git-daemon-export-ok", and it will
refuse to export any Git directory that hasn’t explicitly been marked for export this way
(unless the --export-all parameter is specified). If you pass some directory paths as git
daemon arguments, you can further restrict the offers to a whitelist comprising of those.
By default, only upload-pack service is enabled, which serves git fetch-pack and git
ls-remote clients, which are invoked from git fetch, git pull, and git clone.
This is ideally suited for read-only updates, i.e., pulling from Git repositories.
An upload-archive also exists to serve git archive.
OPTIONS
--strict-paths
Match paths exactly (i.e. don’t allow "/foo/repo" when the real path is
"/foo/repo.git" or "/foo/repo/.git") and don’t do user-relative paths. git daemon
will refuse to start when this option is enabled and no whitelist is specified.
--base-path=<path>
Remap all the path requests as relative to the given path. This is sort of "Git root"
- if you run git daemon with --base-path=/srv/git on example.com, then if you later
try to pull git://example.com/hello.git, git daemon will interpret the path as
/srv/git/hello.git.
--base-path-relaxed
If --base-path is enabled and repo lookup fails, with this option git daemon will
attempt to lookup without prefixing the base path. This is useful for switching to
--base-path usage, while still allowing the old paths.
--interpolated-path=<pathtemplate>
To support virtual hosting, an interpolated path template can be used to dynamically
construct alternate paths. The template supports %H for the target hostname as
supplied by the client but converted to all lowercase, %CH for the canonical hostname,
%IP for the server’s IP address, %P for the port number, and %D for the absolute path
of the named repository. After interpolation, the path is validated against the
directory whitelist.
--export-all
Allow pulling from all directories that look like Git repositories (have the objects
and refs subdirectories), even if they do not have the git-daemon-export-ok file.
--inetd
Have the server run as an inetd service. Implies --syslog (may be overridden with
--log-destination=). Incompatible with --detach, --port, --listen, --user and --group
options.
--listen=<host_or_ipaddr>
Listen on a specific IP address or hostname. IP addresses can be either an IPv4
address or an IPv6 address if supported. If IPv6 is not supported, then
--listen=hostname is also not supported and --listen must be given an IPv4 address.
Can be given more than once. Incompatible with --inetd option.
--port=<n>
Listen on an alternative port. Incompatible with --inetd option.
--init-timeout=<n>
Timeout (in seconds) between the moment the connection is established and the client
request is received (typically a rather low value, since that should be basically
immediate).
--timeout=<n>
Timeout (in seconds) for specific client sub-requests. This includes the time it takes
for the server to process the sub-request and the time spent waiting for the next
client’s request.
--max-connections=<n>
Maximum number of concurrent clients, defaults to 32. Set it to zero for no limit.
--syslog
Short for --log-destination=syslog.
--log-destination=<destination>
Send log messages to the specified destination. Note that this option does not imply
--verbose, thus by default only error conditions will be logged. The <destination>
must be one of:
stderr
Write to standard error. Note that if --detach is specified, the process
disconnects from the real standard error, making this destination effectively
equivalent to none.
syslog
Write to syslog, using the git-daemon identifier.
none
Disable all logging.
The default destination is syslog if --inetd or --detach is specified, otherwise
stderr.
--user-path, --user-path=<path>
Allow ~user notation to be used in requests. When specified with no parameter,
requests to git://host/~alice/foo is taken as a request to access foo repository in
the home directory of user alice. If --user-path=path is specified, the same request
is taken as a request to access path/foo repository in the home directory of user
alice.
--verbose
Log details about the incoming connections and requested files.
--reuseaddr
Use SO_REUSEADDR when binding the listening socket. This allows the server to restart
without waiting for old connections to time out.
--detach
Detach from the shell. Implies --syslog.
--pid-file=<file>
Save the process id in file. Ignored when the daemon is run under --inetd.
--user=<user>, --group=<group>
Change daemon’s uid and gid before entering the service loop. When only --user is
given without --group, the primary group ID for the user is used. The values of the
option are given to getpwnam(3) and getgrnam(3) and numeric IDs are not supported.
Giving these options is an error when used with --inetd; use the facility of inet
daemon to achieve the same before spawning git daemon if needed.
Like many programs that switch user id, the daemon does not reset environment
variables such as $HOME when it runs git programs, e.g. upload-pack and receive-pack.
When using this option, you may also want to set and export HOME to point at the home
directory of <user> before starting the daemon, and make sure any Git configuration
files in that directory are readable by <user>.
--enable=<service>, --disable=<service>
Enable/disable the service site-wide per default. Note that a service disabled
site-wide can still be enabled per repository if it is marked overridable and the
repository enables the service with a configuration item.
--allow-override=<service>, --forbid-override=<service>
Allow/forbid overriding the site-wide default with per repository configuration. By
default, all the services may be overridden.
--[no-]informative-errors
When informative errors are turned on, git-daemon will report more verbose errors to
the client, differentiating conditions like "no such repository" from "repository not
exported". This is more convenient for clients, but may leak information about the
existence of unexported repositories. When informative errors are not enabled, all
errors report "access denied" to the client. The default is --no-informative-errors.
--access-hook=<path>
Every time a client connects, first run an external command specified by the <path>
with service name (e.g. "upload-pack"), path to the repository, hostname (%H),
canonical hostname (%CH), IP address (%IP), and TCP port (%P) as its command-line
arguments. The external command can decide to decline the service by exiting with a
non-zero status (or to allow it by exiting with a zero status). It can also look at
the $REMOTE_ADDR and $REMOTE_PORT environment variables to learn about the requestor
when making this decision.
The external command can optionally write a single line to its standard output to be
sent to the requestor as an error message when it declines the service.
<directory>
A directory to add to the whitelist of allowed directories. Unless --strict-paths is
specified this will also include subdirectories of each named directory.
SERVICES
These services can be globally enabled/disabled using the command-line options of this
command. If finer-grained control is desired (e.g. to allow git archive to be run against
only in a few selected repositories the daemon serves), the per-repository configuration
file can be used to enable or disable them.
upload-pack
This serves git fetch-pack and git ls-remote clients. It is enabled by default, but a
repository can disable it by setting daemon.uploadpack configuration item to false.
upload-archive
This serves git archive --remote. It is disabled by default, but a repository can
enable it by setting daemon.uploadarch configuration item to true.
receive-pack
This serves git send-pack clients, allowing anonymous push. It is disabled by default,
as there is no authentication in the protocol (in other words, anybody can push
anything into the repository, including removal of refs). This is solely meant for a
closed LAN setting where everybody is friendly. This service can be enabled by setting
daemon.receivepack configuration item to true.
EXAMPLES
We assume the following in /etc/services
$ grep 9418 /etc/services
git 9418/tcp # Git Version Control System
git daemon as inetd server
To set up git daemon as an inetd service that handles any repository under the
whitelisted set of directories, /pub/foo and /pub/bar, place an entry like the
following into /etc/inetd all on one line:
git stream tcp nowait nobody /usr/bin/git
git daemon --inetd --verbose --export-all
/pub/foo /pub/bar
git daemon as inetd server for virtual hosts
To set up git daemon as an inetd service that handles repositories for different
virtual hosts, www.example.com and www.example.org, place an entry like the following
into /etc/inetd all on one line:
git stream tcp nowait nobody /usr/bin/git
git daemon --inetd --verbose --export-all
--interpolated-path=/pub/%H%D
/pub/www.example.org/software
/pub/www.example.com/software
/software
In this example, the root-level directory /pub will contain a subdirectory for each
virtual host name supported. Further, both hosts advertise repositories simply as
git://www.example.com/software/repo.git. For pre-1.4.0 clients, a symlink from
/software into the appropriate default repository could be made as well.
git daemon as regular daemon for virtual hosts
To set up git daemon as a regular, non-inetd service that handles repositories for
multiple virtual hosts based on their IP addresses, start the daemon like this:
git daemon --verbose --export-all
--interpolated-path=/pub/%IP/%D
/pub/192.168.1.200/software
/pub/10.10.220.23/software
In this example, the root-level directory /pub will contain a subdirectory for each
virtual host IP address supported. Repositories can still be accessed by hostname
though, assuming they correspond to these IP addresses.
selectively enable/disable services per repository
To enable git archive --remote and disable git fetch against a repository, have the
following in the configuration file in the repository (that is the file config next to
HEAD, refs and objects).
[daemon]
uploadpack = false
uploadarch = true
ENVIRONMENT
git daemon will set REMOTE_ADDR to the IP address of the client that connected to it, if
the IP address is available. REMOTE_ADDR will be available in the environment of hooks
called when services are performed.
GIT
Part of the git(1) suite