NAME

       gps, xgps, xgpsspeed, cgps, lcdgps, gegps - test clients for gpsd

SYNOPSIS

       xgps [-D debug-level] [-h] [-V] [-l [[d] | [m] | [s]]] [-u [[i] | [n] | [m]]] [server [:port [:device]]]

       xgpsspeed [-D debug-level] [-h] [-V] [--nautical] [--landspeed] [--speedunits {[mph] | [kph] | [knots]}]
                 [server [:port [:device]]]

       cgps [-D debug-level] [-h] [-V] [-l [[d] | [m] | [s]]] [-m] [-s] [-u [[i] | [n] | [m]]] [server [:port
            [:device]]]

       lcdgps [-h] [-V] [-l [[d] | [m] | [s]]] [-u [[i] | [n] | [m]]] [server [:port [:device]]]

       gegps [-d directory] [-i]

DESCRIPTION

       These are the demonstration clients shipped with gpsd. They have some common options:

       The -h option causes each client to emit a summary of its options and then exit.

       The -V option causes each client to dump the package version and exit.

       The -l option, when present, sets the format of latitude and longitude reports. The value 'd' produces
       decimal degrees and is the default. The value 'm' produces degrees and decimal minutes. The value 's'
       produces degrees, minutes, and decimal seconds.

       xgps, cgps, and lcdgps look at variables in the environment to figure out what units they should default
       to using for display — imperial, nautical, or metric. Here are the variables and values they check:

               GPSD_UNITS one of:
                         imperial   = miles/feet
                         nautical   = knots/feet
                         metric     = km/meters
               LC_MEASUREMENT
                      en_US      = miles/feet
                         C          = miles/feet
                         POSIX      = miles/feet
                         [other]    = km/meters
               LANG
                      en_US      = miles/feet
                         C          = miles/feet
                         POSIX      = miles/feet
                         [other]    = km/meters

       These preferences may be overridden by the -u option.

       Where present, the -u option can be used to set the system units for display; follow the keyword with 'i'
       for 'imperial' for American units (feet in altitude and error estimates, miles per hour in speeds), 'n'
       for 'nautical' (feet in altitude and error estimates, knots in speed) or 'm' for 'metric' (meters in
       altitude and error estimates, kilometers per hour in speeds).

       The -D option, when present, sets a debug level; it is primarily for use by GPSD developers. It enables
       various progress messages to standard error.

       By default, clients collect data from all compatible devices on localhost, using the default GPSD port
       2947. An optional argument to any client may specify a server to get data from. A colon-separated suffix
       is taken as a port number. If there is a second colon-separated suffix, that is taken as a specific
       device name to be watched. However, if the server specification contains square brackets, the part inside
       them is taken as an IPv6 address and port/device suffixes are only parsed after the trailing bracket.
       Possible cases look like this:

       localhost:/dev/ttyS1
           Look at the default port of localhost, trying both IPv4 and IPv6 and watching output from serial
           device 1.

       example.com:2317
           Look at port 2317 on example.com, trying both IPv4 and IPv6.

       71.162.241.5:2317:/dev/ttyS3
           Look at port 2317 at the specified IPv4 address, collecting data from attached serial device 3.

       [FEDC:BA98:7654:3210:FEDC:BA98:7654:3210]:2317:/dev/ttyS5
           Look at port 2317 at the specified IPv6 address, collecting data from attached serial device 5.

       Not all clients shipped with GPSD are documented here. See also the separate manual pages for gpspipe(1)
       and gpsmon(1) and gpxlogger(1) .

   xgps
       xgps is a simple test client for gpsd with an X interface. It displays current GPS position/time/velocity
       information and (for GPSes that support the feature) the locations of accessible satellites.

       In the sky view, satellites are color-coded to indicate quality of signal; consult the data display to
       the left for exact figures in dB. Square icons indicate WAAS/EGNOS satellites, circles indicate ordinary
       GPS satellites. Filled icons were used in the last fix, outline icons were not.

   xgpsspeed
       xgpsspeed is a speedometer that uses position information from the GPS. It accepts an -h option and
       optional argument as for gps, or a -V option to dump the package version and exit.

       The default display mode is a speed and track presentation modeled after a marine navigation display; for
       backward compatibility the --nautical option forces this mode. The --landspeed option produces a simple
       speedometer.

       The -speedunits option can be used to set the speed units for display; follow the keyword with knots for
       nautical miles per hour, kph for kilometres per hour, or mph for miles per hour. The default is miles per
       hour.

       In the nautical mode only, --maxspeed sets the maximum on the speedometer.

   cgps
       cgps is a client resembling xgps, but without the pictorial satellite display and able to run on a serial
       terminal or terminal emulator.

       The -s option prevents cgps from displaying the data coming from the daemon. This display can also be
       toggled with the s command.

       The -m option will display your magnetic heading (as opposed to your true heading). This is a calculated
       value, not a measured value, and is subject to a potential error of up to two degrees in the areas for
       which the calculation is valid (currently Western Europe, Alaska, and Lower 48 in the USA). The formulas
       used are those found in the Aviation Formulary v1.43.

       cgps terminates when you send it a SIGHUP or SIGINT; given default terminal settings this will happen
       when you type Ctrl-C at it. It will also terminate on 'q'

   lcdgps
       A client that passes gpsd data to lcdproc, turning your car computer into a very expensive and nearly
       feature-free GPS receiver. Currently assumes a 4x40 LCD and writes data formatted to fit that size
       screen. Also displays 4- or 6-character Maidenhead grid square output.

   gegps
       This program collects fixes from gpsd and feeds them to a running instance of Google Earth for live
       location tracking.

       The -d argument is the location of the Google Earth installation directory. If not specified, it defaults
       to the current directory.

       If you have the free (non-subscription) version, start by running with the -i option to drop a clue in
       the Google Earth installation directory, as 'Open_in_Google_Earth_RT_GPS.kml', then open that file in
       Places (File > Open...). Run gpsd in the normal way after that.

SEE ALSO

       gpsd(8), libgps(3), libgpsmm(3), gpsfake(1), gpsctl(1), gpscat(1), gpsprof(1).  gpspipe(1).  gpsmon(1).
       gpxlogger(1).

AUTHORS

       Remco Treffcorn, Derrick Brashear, Russ Nelson & Eric S. Raymond, Jeff Francis (cgps), Chen Wei
       <weichen302@aol.com> (gegps & xgpsspeed), Robin Wittler <real@the-real.org> (xgpsspeed).

       This manual page by Eric S. Raymond <esr@thyrsus.com>