Provided by: gmt-common_5.4.3+dfsg-1_all 
NAME
grdview - Create 3-D perspective image or surface mesh from a grid
SYNOPSIS
grdview relief_file -Jparameters [ -B[p|s]parameters ] [ -C[cpt]] [ -Gdrapefile | -Ggrd_r -Ggrd_g
-Ggrd_b ] [ -I[intensfile|intensity|modifiers] ] [ -Jz|Zparameters ] [ -K ] [ -Nlevel[+gfill] ] [ -O ]
[ -P ] [ -Qargs[+m] ] [ -Rwest/east/south/north[/zmin/zmax][+r] ] [ -Ssmooth ] [ -T[s][o[pen]] ] [
-U[stamp] ] [ -Wc|m|fpen ] [ -Xx_offset ] [ -Yy_offset ] [ -fflags ] [ -nflags ] [ -pflags ] [
-ttransp ]
Note: No space is allowed between the option flag and the associated arguments.
DESCRIPTION
grdview reads a 2-D grid file and produces a 3-D perspective plot by drawing a mesh, painting a
colored/grayshaded surface made up of polygons, or by scanline conversion of these polygons to a raster
image. Options include draping a data set on top of a surface, plotting of contours on top of the
surface, and apply artificial illumination based on intensities provided in a separate grid file.
REQUIRED ARGUMENTS
relief_file
2-D gridded data set to be imaged (the relief of the surface). (See GRID FILE FORMAT below.)
-Jparameters (more …)
Select map projection.
-Jz|Zparameters (more …)
Set z-axis scaling; same syntax as -Jx.
OPTIONAL ARGUMENTS
-B[p|s]parameters (more …)
Set map boundary frame and axes attributes.
-C[cpt]
name of the CPT. Must be present if you want (1) mesh plot with contours (-Qm), or (2)
shaded/colored perspective image (-Qs or -Qi). For -Qs: You can specify that you want to skip a
z-slice by setting the red r/g/b component to -; to use a pattern give red =
P|ppattern[+bcolor][+fcolor][+rdpi]. Alternatively, supply the name of a GMT color master dynamic
CPT [rainbow] to automatically determine a continuous CPT from the grid’s z-range. If the dynamic
CPT has a default range then that range will be imposed instead.
-Gdrapefile | -Ggrd_r -Ggrd_g -Ggrd_b
Drape the image in drapefile on top of the relief provided by relief_file. [Default is
relief_file]. Note that -Jz and -N always refers to the relief_file. The drapefile only provides
the information pertaining to colors, which is looked-up via the CPT (see -C). Alternatively, give
three grid files via separate -G options in the specified order. These files must contain the red,
green, and blue colors directly (in 0-255 range) and no CPT is needed. The drapefile may be of
higher resolution than the relief_file.
-I[intensfile|intensity|modifiers]
Gives the name of a grid file with intensities in the (-1,+1) range, or a constant intensity to
apply everywhere; this simply affects the ambient light. If just + is given then we derive an
intensity grid from the input data grid grd_z via a call to grdgradient using the arguments -A-45
and -Nt1 for that module. You can append +aazimuth and **+n*args to override those values. If you
want more specific intensities then run grdgradient separately first. [Default is no
illumination].
-K (more …)
Do not finalize the PostScript plot.
-Nlevel[+gfill]
Draws a plane at this z-level. If the optional color is provided via the +g modifier, the frontal
facade between the plane and the data perimeter is colored. See -Wf for setting the pen used for
the outline.
-O (more …)
Append to existing PostScript plot.
-P (more …)
Select “Portrait” plot orientation.
-Qargs[+m]
Select one of following settings. For any of these choices, you may force a monochrome image by
appending the modifier +m. Colors are then converted to shades of gray using the (monochrome
television) YIQ transformation
1. Specify m for mesh plot [Default], and optionally append color for a different mesh paint
[white].
2. Specify mx or my for waterfall plots (row or column profiles). Specify color as for plain m
3. Specify s for surface plot, and optionally append m to have mesh lines drawn on top of surface.
4. Specify i for image plot, and optionally append the effective dpi resolution for the
rasterization [100].
5. Specify c. Same as -Qi but will make nodes with z = NaN transparent, using the colormasking
feature in PostScript Level 3 (the PS device must support PS Level 3). .
-Rxmin/xmax/ymin/ymax[+r][+uunit] (more …)
Specify the region of interest.
For perspective view p, optionally append /zmin/zmax. (more …) This option may be used to indicate the
range used for the 3-D axes [Default is region given by the relief_file]. You may ask for a larger
w/e/s/n region to have more room between the image and the axes. A smaller region than specified in the
relief_file will result in a subset of the grid.
-Ssmooth
Smooth the contours before plotting (see grdcontour) [Default is no smoothing].
-T[s][o[pen]]
Plot image without any interpolation. This involves converting each node-centered bin into a
polygon which is then painted separately. Append s to skip nodes with z = NaN. This option is
useful for categorical data where interpolating between values is meaningless. Optionally, append
o to draw the tile outlines, and specify a custom pen if the default pen is not to your liking. As
this option produces a flat surface it cannot be combined with -JZ or -Jz.
-U[[just]/dx/dy/][c|label] (more …)
Draw GMT time stamp logo on plot.
-V[level] (more …)
Select verbosity level [c].
-Wc
|
m
|
fpen
-Wc Draw contour lines on top of surface or mesh (not image). Append pen attributes used for the
contours. [Default: width = 0.75p, color = black, style = solid].
-Wm Sets the pen attributes used for the mesh. [Default: width = 0.25p, color = black, style =
solid]. You must also select -Qm or -Qsm for meshlines to be drawn.
-Wf Sets the pen attributes used for the facade. [Default: width = 0.25p, color = black, style =
solid]. You must also select -N for the facade outline to be drawn.
-X[a|c|f|r][x-shift[u]]
-Y[a|c|f|r][y-shift[u]] (more …)
Shift plot origin.
-n[b|c|l|n][+a][+bBC][+c][+tthreshold] (more …)
Select interpolation mode for grids.
-p[x|y|z]azim[/elev[/zlevel]][+wlon0/lat0[/z0]][+vx0/y0] (more …)
Select perspective view.
-t[transp] (more …)
Set PDF transparency level in percent.
-^ or just -
Print a short message about the syntax of the command, then exits (NOTE: on Windows just use -).
-+ or just +
Print an extensive usage (help) message, including the explanation of any module-specific option
(but not the GMT common options), then exits.
-? or no arguments
Print a complete usage (help) message, including the explanation of all options, then exits.
GRID FILE FORMATS
By default GMT writes out grid as single precision floats in a COARDS-complaint netCDF file format.
However, GMT is able to produce grid files in many other commonly used grid file formats and also
facilitates so called “packing” of grids, writing out floating point data as 1- or 2-byte integers. (more
…)
CONSEQUENCES OF GRID RESAMPLING
Except for Cartesian cases, we need to resample your geographic grid onto an equidistant projected grid.
In doing so various algorithms come into play that projects data from one lattice to another while
avoiding anti-aliasing, leading to possible distortions. One expected effect of resampling with splines
is the tendency for the new resampled grid to slightly exceed the global min/max limits of the original
grid. If this is coupled with tight CPT limits you may find that some map areas may show up with fore-
or background color due to the resampling. In that case you have two options: (1) Modify your CPT to fit
the resampled extrema (reported with -V) or (2) Impose clipping of resampled values so they do not exceed
the input min/max values (add +c to your -n option).
EXAMPLES
To make a mesh plot from the file hawaii_grav.nc and drawing the contours given in the CPT hawaii.cpt on
a Lambert map at 1.5 cm/degree along the standard parallels 18 and 24, with vertical scale 20 mgal/cm,
and looking at the surface from SW at 30 degree elevation, run
gmt grdview hawaii_grav.nc -Jl18/24/1.5c -Chawaii.cpt \
-Jz0.05c -Qm -N-100 -p225/30 -Wc > hawaii_grav_image.ps
To create a illuminated color perspective plot of the gridded data set image.nc, using the CPT color.rgb,
with linear scaling at 10 cm/x-unit and tickmarks every 5 units, with intensities provided by the file
intens.nc, and looking from the SE, use
gmt grdview image.nc -Jx10.0c -Ccolor.rgb -Qs -p135/30 -Iintens.nc > image3D.ps
To make the same plot using the rastering option with dpi = 50, use
gmt grdview image.nc -Jx10.0c -Ccolor.rgb -Qi50 -p135/30 -Iintens.nc > image3D.ps
To create a color PostScript perspective plot of the gridded data set magnetics.nc, using the CPT
mag_intens.cpt, draped over the relief given by the file topography.nc, with Mercator map width of 6 inch
and tickmarks every 1 degree, with intensities provided by the file topo_intens.nc, and looking from the
SE, run
gmt grdview topography.nc -JM6i -Gmagnetics.nc -Cmag_intens.cpt \
-Qs -p140/30 -Itopo_intens.nc > draped3D.ps
Given topo.nc and the Landsat image veggies.ras, first run grd2rgb to get the red, green, and blue grids,
and then drape this image over the topography and shade the result for good measure. The commands are
gmt grd2rgb veggies.ras -Glayer_%c.nc
gmt grdview topo.nc -JM6i -Qi -p140/30 -Itopo_intens.nc \
-Glayer_r.nc -Glayer_g.nc -Glayer_b.nc > image.ps
REMARKS
For the -Qs option: PostScript provides no way of smoothly varying colors within a polygon, so colors can
only vary from polygon to polygon. To obtain smooth images this way you may resample the grid file(s)
using grdsample or use a finer grid size when running gridding programs like surface or nearneighbor.
Unfortunately, this produces huge PostScript files. The alternative is to use the -Qi option, which
computes bilinear or bicubic continuous color variations within polygons by using scanline conversion to
image the polygons.
SEE ALSO
gmt, grd2rgb, gmtcolors, grdcontour, grdimage, grdsample, nearneighbor, psbasemap, pscontour, pstext,
surface
COPYRIGHT
2018, P. Wessel, W. H. F. Smith, R. Scharroo, J. Luis, and F. Wobbe
5.4.3 Jan 03, 2018 GRDVIEW(1gmt)