Ubuntu Manpage: img2pdf.py - lossless conversion of raster images to pdf

NAME

       img2pdf.py - lossless conversion of raster images to pdf

DESCRIPTION

       usage: img2pdf.py [-h] [-v] [-V] [-o out] [-C colorspace] [-D]

              [--without-pdfrw]  [--first-frame-only] [-S LxL] [-s LxL] [-b L[:L]] [-f FIT] [-a] [--title title]
              [--author  author]  [--creator  creator]  [--producer  producer]   [--creationdate   creationdate]
              [--moddate   moddate]  [--subject  subject]  [--keywords  kw  [kw  ...]]   [--viewer-panes  PANES]
              [--viewer-initial-page   NUM]   [--viewer-magnification   MAG]    [--viewer-page-layout    LAYOUT]
              [--viewer-fit-window] [--viewer-center-window] [--viewer-fullscreen] [infile [infile ...]]

       Losslessly  convert  raster  images  to PDF without re-encoding JPEG and JPEG2000 images. This leads to a
       lossless conversion of JPEG and JPEG2000 images with the  only  added  file  size  coming  from  the  PDF
       container itself.

       Other  raster graphics formats are losslessly stored in a zip/flate encoding of their RGB representation.
       This might increase file size and does not store transparency. There is nothing that can  be  done  about
       that  until  the  PDF  format  allows  embedding other image formats like PNG. Thus, img2pdf is primarily
       useful to convert JPEG and JPEG2000 images to PDF.

       The output is sent to standard output so that it can be redirected into a file or to another  program  as
       part of a shell pipe. To directly write the output into a file, use the -o or --output option.

OPTIONS

positional arguments:
infile Specifies the input file(s) in any format that can be read by the Python Imaging Library (PIL). If
no input images are given, then a single image is read from standard input. The special filename
"-" can be used once to read an image from standard input. To read a file in the current directory
with the filename "-", pass it to img2pdf by explicitly stating its relative path like "./-".

optional arguments:
-h, --help
show this help message and exit

-v, --verbose
Makes the program operate in verbose mode, printing messages on standard error.

-V, --version
Prints version information and exits.

General output arguments:
Arguments controlling the output format.

-o out, --output out
Makes the program output to a file instead of standard output.

-C colorspace, --colorspace colorspace
Forces the PIL colorspace. See the epilogue for a list of possible values. Usually the PDF
colorspace would be derived from the color space of the input image. This option overwrites the
automatically detected colorspace from the input image and thus forces a certain colorspace in the
output PDF /ColorSpace property. This is useful for JPEG 2000 images with a different colorspace
than RGB.

-D, --nodate
Suppresses timestamps in the output and thus makes the output deterministic between individual
runs. You can also manually set a date using the --moddate and --creationdate options.

--without-pdfrw
By default, img2pdf uses the pdfrw library to create the output PDF if pdfrw is available. If you
want to use the internal PDF generator of img2pdf even if pdfrw is present, then pass this option.
This can be useful if you want to have unicode metadata values which pdfrw does not yet support
(See https://github.com/pmaupin/pdfrw/issues/39) or if you want the PDF code to be more human
readable.

--first-frame-only
By default, img2pdf will convert multi-frame images like multi-page TIFF or animated GIF images to
one page per frame. This option will only let the first frame of every multi-frame input image be
converted into a page in the resulting PDF.

Image and page size and layout arguments:
Every input image will be placed on its own page. The image size is controlled by the dpi value of
the input image or, if unset or missing, the default dpi of 96.00. By default, each page will have
the same size as the image it shows. Thus, there will be no visible border between the image and
the page border by default. If image size and page size are made different from each other by the
options in this section, the image will always be centered in both dimensions.

The image size and page size can be explicitly set using the --imgsize and --pagesize options,
respectively. If either dimension of the image size is specified but the same dimension of the
page size is not, then the latter will be derived from the former using an optional minimal
distance between the image and the page border (given by the --border option) and/or a certain
fitting strategy (given by the --fit option). The converse happens if a dimension of the page size
is set but the same dimension of the image size is not.

Any length value in below options is represented by the meta variable L which is a floating point
value with an optional unit appended (without a space between them). The default unit is pt (1/72
inch, the PDF unit) and other allowed units are cm (centimeter), mm (millimeter), and in (inch).

Any size argument of the format LxL in the options below specifies the width and height of a
rectangle where the first L represents the width and the second L represents the height with an
optional unit following each value as described above. Either width or height may be omitted. If
the height is omitted, the separating x can be omitted as well. Omitting the width requires to
prefix the height with the separating x. The missing dimension will be chosen so to not change the
image aspect ratio. Instead of giving the width and height explicitly, you may also specify some
(case-insensitive) common page sizes such as letter and A4. See the epilogue at the bottom for a
complete list of the valid sizes.

The --fit option scales to fit the image into a rectangle that is either derived from the
--imgsize option or otherwise from the --pagesize option. If the --border option is given in
addition to the --imgsize option while the --pagesize option is not given, then the page size will
be calculated from the image size, respecting the border setting. If the --border option is given
in addition to the --pagesize option while the --imgsize option is not given, then the image size
will be calculated from the page size, respecting the border setting. If the --border option is
given while both the --pagesize and --imgsize options are passed, then the --border option will be
ignored.

-S LxL, --pagesize LxL
Sets the size of the PDF pages. The short-option is the upper case S because it is an mnemonic for
being bigger than the image size.

-s LxL, --imgsize LxL
Sets the size of the images on the PDF pages. In addition, the unit dpi is allowed which will set
the image size as a value of dots per inch. Instead of a unit, width and height values may also
have a percentage sign appended, indicating a resize of the image by that percentage. The
short-option is the lower case s because it is an mnemonic for being smaller than the page size.

-b L[:L], --border L[:L]
Specifies the minimal distance between the image border and the PDF page border. This value Is
overwritten by explicit values set by --pagesize or --imgsize. The value will be used when
calculating page dimensions from the image dimensions or the other way round. One, or two length
values can be given as an argument, separated by a colon. One value specifies the minimal border
on all four sides. Two values specify the minimal border on the top/bottom and left/right,
respectively. It is not possible to specify asymmetric borders because images will always be
centered on the page.

-f FIT, --fit FIT
If --imgsize is given, fits the image using these dimensions. Otherwise, fit the image into the
dimensions given by --pagesize. FIT is one of into, fill, exact, shrink and enlarge. The default
value is "into". See the epilogue at the bottom for a description of the FIT options.

-a, --auto-orient
If both dimensions of the page are given via --pagesize, conditionally swaps these dimensions such
that the page orientation is the same as the orientation of the input image. If the orientation of
a page gets flipped, then so do the values set via the --border option.

Arguments setting metadata:
Options handling embedded timestamps, title and author information.

--title title
Sets the title metadata value

--author author
Sets the author metadata value

--creator creator
Sets the creator metadata value

--producer producer
Sets the producer metadata value (default is: img2pdf 0.2.3)

--creationdate creationdate
Sets the UTC creation date metadata value in YYYY-MMDD or YYYY-MM-DDTHH:MM or YYYY-MM-DDTHH:MM:SS
format or any format understood by python dateutil module or any format understood by `date
--date`

--moddate moddate
Sets the UTC modification date metadata value in YYYYMM-DD or YYYY-MM-DDTHH:MM or
YYYY-MM-DDTHH:MM:SS format or any format understood by python dateutil module or any format
understood by `date --date`

--subject subject
Sets the subject metadata value

--keywords kw [kw ...]
Sets the keywords metadata value (can be given multiple times)

PDF viewer arguments:
PDF files can specify how they are meant to be presented to the user by a PDF viewer

--viewer-panes PANES
Instruct the PDF viewer which side panes to show. Valid values are "outlines" and "thumbs". It is
not possible to specify both at the same time.

--viewer-initial-page NUM
Instead of showing the first page, instruct the PDF viewer to show the given page instead. Page
numbers start with 1.

--viewer-magnification MAG
Instruct the PDF viewer to open the PDF with a certain zoom level. Valid values are either a
floating point number giving the exact zoom level, "fit" (zoom to fit whole page), "fith" (zoom to
fit page width) and "fitbh" (zoom to fit visible page width).

--viewer-page-layout LAYOUT
Instruct the PDF viewer how to arrange the pages on the screen. Valid values are "single" (display
single pages), "onecolumn" (one continuous column), "twocolumnright" (two continuous columns with
odd number pages on the right) and "twocolumnleft" (two continuous columns with odd numbered pages
on the left)

--viewer-fit-window
Instruct the PDF viewer to resize the window to fit the page size

--viewer-center-window
Instruct the PDF viewer to center the PDF viewer window

--viewer-fullscreen
Instruct the PDF viewer to open the PDF in fullscreen mode

Colorspace:
Currently, the colorspace must be forced for JPEG 2000 images that are not in the RGB colorspace.
Available colorspace options are based on Python Imaging Library (PIL) short handles.

RGB RGB color

L Grayscale

1 Black and white (internally converted to grayscale)

CMYK CMYK color

CMYK;I CMYK color with inversion (for CMYK JPEG files from Adobe)

Paper sizes:
You can specify the short hand paper size names shown in the first column in the table below as
arguments to the --pagesize and --imgsize options. The width and height they are mapping to is
shown in the second column. Giving the value in the second column has the same effect as giving
the short hand in the first column. Appending ^T (a caret/circumflex followed by the letter T)
turns the paper size from portrait into landscape. The postfix thus symbolizes the transpose. The
values are case insensitive.

A0 841mmx1189mm

A1 594mmx841mm

A2 420mmx594mm

A3 297mmx420mm

A4 210mmx297mm

A5 148mmx210mm

A6 105mmx148mm

Letter 8.5inx11in

Fit options:
The img2pdf options for the --fit argument are shown in the first column in the table below. The
function of these options can be mapped to the geometry operators of imagemagick. For users who
are familiar with imagemagick, the corresponding operator is shown in the second column. The
third column shows whether or not the aspect ratio is preserved for that option (same as in
imagemagick). Just like imagemagick, img2pdf tries hard to preserve the aspect ratio, so if the
--fit argument is not given, then the default is "into" which corresponds to the absence of any
operator in imagemagick. The value of the --fit option is case insensitive.

---------+---+---+----------------------------------------------------------

fill | ^ | Y | Width and height values specify the minimum values.

---------+---+---+----------------------------------------------------------

exact | ! | N | Width and height emphatically given.

---------+---+---+----------------------------------------------------------

---------+---+---+----------------------------------------------------------

enlarge | < | Y | Enlarges an image with dimensions smaller than the given

| | | ones (and otherwise behaves like "into").

Argument parsing:
Argument long options can be abbreviated to a prefix if the abbreviation is anambiguous. That is,
the prefix must match a unique option.

Beware of your shell interpreting argument values as special characters (like the semicolon in the
CMYK;I colorspace option). If in doubt, put the argument values in single quotes.

If you want an argument value to start with one or more minus characters, you must use the long
option name and join them with an equal sign like so:

$ img2pdf --author=--test--
If your input file name starts with one or more minus characters, either separate the input files
from the other arguments by two minus signs:

$ img2pdf -- --my-file-starts-with-two-minuses.jpg

Or be more explicit about its relative path by prepending a ./:

$ img2pdf ./--my-file-starts-with-two-minuses.jpg

The order of non-positional arguments (all arguments other than the input images) does not matter.

EXAMPLES

              Lines  starting  with  a  dollar sign denote commands you can enter into your terminal. The dollar
              sign signifies your command prompt. It is not part of the command you type.

              Convert two scans in JPEG format to a PDF document.

              $ img2pdf --output out.pdf page1.jpg page2.jpg

              Convert a directory of JPEG images into a PDF with printable A4 pages in landscape mode.  On  each
              page,  the  photo  takes the maximum amount of space while preserving its aspect ratio and a print
              border of 2 cm on the top and bottom and 2.5 cm on the left and right hand side.

              $ img2pdf --output out.pdf --pagesize A4^T --border 2cm:2.5cm *.jpg

              On each A4 page, fit images into a 10 cm times 15 cm rectangle but keep the original image size if
              the image is smaller than that.

              $ img2pdf --output out.pdf -S A4 --imgsize 10cmx15cm --fit shrink *.jpg

              Prepare a directory of photos to be printed borderless on photo paper with a 3:2 aspect ratio  and
              rotate each page so that its orientation is the same as the input image.

              $ img2pdf --output out.pdf --pagesize 15cmx10cm --auto-orient *.jpg

              Encode  a grayscale JPEG2000 image. The colorspace has to be forced as img2pdf cannot read it from
              the JPEG2000 file automatically.

              $ img2pdf --output out.pdf --colorspace L input.jp2

AUTHOR

       Written by Johannes 'josch' Schauer <josch@mister-muffin.de>

REPORTING BUGS

       Report bugs at https://gitlab.mister-muffin.de/josch/img2pdf/issues

img2pdf.py 0.2.3                                  January 2017                                     IMG2PDF.PY(1)