Provided by: mstflint_4.13.3+2-2~ubuntu18.04.1_amd64 
NAME
mstfwtrace - Extracts and prints trace messages generated by the firmware of 5th generation devices
DESCRIPTION
usage: mstfwtrace -d|--device DEVICE [options]
optional arguments:
-h, --help
show this help message and exit
-v, --version, -v
Print tool version.
OPTIONS
-d DEVICE, --device DEVICE
PCI device name
--tracer_mode TRACER_MODE
Tracer mode [MEM]
--real_ts
Print real timestamps in [hh:mm:ss:nsec]
--ignore_old_events
Ignore collecting old events
Format:
-i IRISC, --irisc IRISC
Irisc name [all]
-s, --stream
Run in streaming mode
-m MASK, --mask MASK
Trace class mask, use "+" to enable multiple classes or use integer format, e.g: -m
class1+class2+... or 0xff00ff00
-l LEVEL, --level LEVEL
Trace level
Device Specific Info: ====================
ConnectIB: Trace classes:
DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG CMD_IF, PHY_IB, PHY_RX_ADAP, PHY_EYE_OPN,
PHY_COMMON PHY_MANAGER, PWR, FLR, ICM_ACCESS, MAD RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS
CMD_DRIVER, PROFILING, MANAGEMENT, FLASH, STEERING IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH VIRT
SwitchIB: Trace classes:
class1, class2
ConnectX4: Trace classes:
DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG CMD_IF, PHY_IB, PHY_RX_ADAP, PHY_EYE_OPN,
PHY_COMMON PHY_MANAGER, PWR, FLR, ICM_ACCESS, MAD RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS
CMD_DRIVER, PROFILING, MANAGEMENT, FLASH, STEERING IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH VIRT
ConnectX5: Trace classes:
DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG CMD_IF, PHY_IB, PHY_RX_ADAP, PHY_EYE_OPN,
PHY_COMMON PHY_MANAGER, PWR, FLR, ICM_ACCESS, MAD RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS
CMD_DRIVER, PROFILING, MANAGEMENT, FLASH, STEERING IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH VIRT
BlueField: Trace classes:
DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG CMD_IF, PHY_IB, PHY_RX_ADAP, PHY_EYE_OPN,
PHY_COMMON PHY_MANAGER, PWR, FLR, ICM_ACCESS, MAD RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS
CMD_DRIVER, PROFILING, MANAGEMENT, FLASH, STEERING IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH VIRT
ConnectX6: Trace classes:
DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG CMD_IF, PHY_IB, PHY_RX_ADAP, PHY_EYE_OPN,
PHY_COMMON PHY_MANAGER, PWR, FLR, ICM_ACCESS, MAD RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS
CMD_DRIVER, PROFILING, MANAGEMENT, FLASH, STEERING IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH VIRT
ConnectX6DX: Trace classes:
DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG CMD_IF, PHY_IB, PHY_RX_ADAP, PHY_EYE_OPN,
PHY_COMMON PHY_MANAGER, PWR, FLR, ICM_ACCESS, MAD RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS
CMD_DRIVER, PROFILING, MANAGEMENT, FLASH, STEERING IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH VIRT
Spectrum: Trace classes:
class1, class2
ConnectX4LX: Trace classes:
DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG CMD_IF, PHY_IB, PHY_RX_ADAP, PHY_EYE_OPN,
PHY_COMMON PHY_MANAGER, PWR, FLR, ICM_ACCESS, MAD RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS
CMD_DRIVER, PROFILING, MANAGEMENT, FLASH, STEERING IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH VIRT
SwitchIB2: Trace classes:
class1, class2
Quantum: Trace classes:
class1, class2
Spectrum2: Trace classes:
class1, class2
SEE ALSO
The full documentation for mstfwtrace, is maintained as a Texinfo manual. If the info and mstfwtrace,
programs are properly installed at your site, the command
info mstfwtrace,
should give you access to the complete manual.
mstfwtrace, mstflint 4.13.3, built on Dec 30 2019,December52019t SHA Hash: N/A MSTFWTRACE,(1)