Provided by: multistrap_2.2.9_all 
Name
multistrap - multiple repository bootstraps
Synopsis
multistrap [-a ARCH] [-d DIR] -f CONFIG_FILE
multistrap [--simulate] -f CONFIG_FILE
multistrap -?|-h|--help|--version
Options
-?|-h|--help|--version - output the help text and exit successfully.
--dry-run - collate all the configuration settings and output a bare summary.
--simulate - same as --dry-run
(The following options can also be set in the configuration file.)
-a|--arch - architecture of the packages to put into the multistrap.
-d|--dir - directory into which the bootstrap will be installed.
-f|--file - configuration file for multistrap [required]
-s|--shortcut - shortened version of -f for files in known locations.
--tidy-up - remove apt cache data, downloaded Packages files and the apt package cache.
Same as cleanup=true.
--no-auth - allow the use of unauthenticated repositories. Same as noauth=true
--source-dir DIR - move the contents of var/cache/apt/archives/ from inside the chroot to
the specified external directory, then add the Debian source packages for each used
binary. Same as retainsources=DIR If the specified directory does not exist, nothing is
done. Requires --tidy-up in order to calculate the full list of source packages, including
dependencies.
Description
multistrap provides a debootstrap-like method based on apt and extended to provide support
for multiple repositories, using a configuration file to specify the relevant suites,
architecture, extra packages and the mirror to use for each bootstrap.
The aim is to create a complete bootstrap / root filesystem with all packages installed
and configured, instead of just the base system.
In most cases, users will need to create a configuration file for each different
multistrap usage.
Example configuration:
[General]
arch=armel
directory=/opt/multistrap/
# same as --tidy-up option if set to true
cleanup=true
# same as --no-auth option if set to true
# keyring packages listed in each bootstrap will
# still be installed.
noauth=false
# extract all downloaded archives (default is true)
unpack=true
# whether to add the /suite to be explicit about where apt
# needs to look for packages. Default is false.
explicitsuite=false
# enable MultiArch for the specified architectures
# default is empty
multiarch=
# aptsources is a list of sections to be used
# the /etc/apt/sources.list.d/multistrap.sources.list
# of the target. Order is not important
aptsources=Debian
# the bootstrap option determines which repository
# is used to calculate the list of Priority: required packages
# and which packages go into the rootfs.
# The order of sections is not important.
bootstrap=Debian
[Debian]
packages=
source=http://ftp.uk.debian.org/debian
keyring=debian-archive-keyring
suite=jessie
This will result in a completely normal bootstrap of Debian Jessie from the specified
mirror, for armel in '/opt/multistrap/'. (This configuration is retained in the package as
/usr/share/multistrap/jessie.conf)
Specify a package to extend the multistrap to include that package and all dependencies of
that package.
Specify more repositories for the bootstrap by adding new sections. Section names need to
be listed in the bootstrap general option for the packages to be included in the
bootstrap.
Specify which repositories will be available to the final system at boot by listing the
section names in the aptsources general option, e.g. to exclude some internal sources or
when using a local mirror when building the rootfs.
Section names are case-insensitive.
All dependencies are resolved only by apt, using all bootstrap repositories, to use only
the most recent and most suitable dependencies. Note that multistrap turns off Install-
Recommends so if the multistrap needs a package that is only a Recommended dependency, the
recommended package needs to be specified in the packages line explicitly. See "Explicit
suite specification" for more information on getting specific packages from specific
suites.
'Architecture' and 'directory' can be overridden on the command line. Some other general
options also have command line options.
Online examples and documentation
"multistrap" supports a range of permutations, see the wiki and the emdebian website for
more information and example configurations:
http://wiki.debian.org/Multistrap
http://www.emdebian.org/multistrap/
"multistrap" includes an example configuration file with a full list of all supported
config file options: /usr/share/doc/multistrap/examples/full.conf
Shortcuts
In a similar manner to "debootstrap", "multistrap" supports referring to configuration
files in known locations by shortcuts. When using the "--shortcut" option, "multistrap"
will look for files in /usr/share/multistrap and then /etc/multistrap.d/, appending a
'.conf' suffix to the specified shortcut.
These two commands are equivalent:
$ sudo multistrap -s sid
$ sudo multistrap -f /usr/share/multistrap/sid.conf
Note that "multistrap" will still fail if the configuration file itself does not set the
directory or the architecture.
Repositories
"aptsources" lists the sections which should be used to create the
/etc/apt/sources.list.d/multistrap.list apt sources in the final system. Not all
"aptsources" have to appear in the "bootstrap" section if you have some internal or local
sources which are not accessible to the installed root filesystem.
"bootstrap" lists the sections which will be used to create the multistrap itself. Only
packages listed in "bootstrap" will be downloaded and unpacked by multistrap.
Make sure "bootstrap" lists all sections you need for apt to be able to find all the
packages to be unpacked for the multistrap.
(Older versions of multistrap supported the same option under the "debootstrap" name -
this spelling is still supported but new configuration files should be "bootstrap"
instead.
General settings:
'arch' can be overridden on the command line using the "--arch" option.
'directory' specifies the top level directory where the bootstrap will be created - it is
not packed into a .tgz once complete.
'bootstrap' lists the Sections which will be used to specify the packages which will be
downloaded (and optionally unpacked) into the bootstrap.
'aptsources' lists the Sections which will be used to specify the apt sources in the final
system, e.g. if you need to use a local repository to generate the rootfs which will not
be available to the device at runtime, list that section in "bootstrap" but not in
"aptsources".
If you want a package to be in the rootfs, it must be specified in the "bootstrap" list
under General.
The order of section names in either list is not important.
If "markauto" is set to true, "multistrap" will request apt to mark all packages specified
in the combined "packages" list as manually installed and all dependencies not explicitly
listed as automatically installed in the APT extended state database. "markauto" can be
used independently of "unpack".
As with debootstrap, multistrap will continue after errors, as long as the configuration
file can be correctly parsed.
multistrap also implements the machine:variant support originally used in Emdebian Crush,
although in a different implementation. Using the cascading configuration support,
particular machine:variant combinations can be supported by simple changes on the command
line.
Setting "tarballname" to true also packs up the final filesystem into a tarball.
Note that multistrap ignores any unrecognised options in the config file - this allows for
backwards-compatible behaviour as well as overloading the multistrap config files to
support other tools (like pbuilder). Use the "--simulate" option to see the combined
configuration settings.
However, if the config file itself cannot be parsed, multistrap will abort. Check that the
config file has a key and a value for each line, other than comments. Values must all on
the same line as the key.
Section settings
[Debian]
packages=
source=http://ftp.uk.debian.org/debian
keyring=debian-archive-keyring
suite=jessie
The section name (in [] brackets) needs to be unique for this configuration file and any
configuration files which this file includes. Section names are case insensitive (all
comparisons happen after conversion to lower case).
'packages' is the list of packages to be added when this Section is listed in "bootstrap"
- all package names must be listed on a single line or the file will fail to parse. One
alternative is to define your list of packages as multiple groups with packages separated
on a functional / dependency basis, e.g. base, Xorg, networking etc. and list each group
under 'bootstrap'.
bootstrap=base networking
[base]
packages=udev mtd-utils
source=http://http.debian.net/debian
keyring=debian-archive-keyring
suite=jessie
[networking]
packages=netbase ifupdown iproute net-tools samba
source=http://http.debian.net/debian
keyring=debian-archive-keyring
suite=jessie
As a special case, "multistrap" also supports multiple packages keys per section, one line
for each. Other keys cannot be repeated in this manner.
[Emdebian]
packages=udev mtd-utils netbase ifupdown iproute
packages=busybox net-tools samba
source=http://http.debian.net/debian
keyring=debian-archive-keyring
suite=jessie
'source' is the apt source to use for this Section. To use a local source on the same
machine, ensure you use "copy://" not "file://", so that apt is told to copy the packages
into the rootfs instead of assuming it can try to download them later - because that
"later" will never actually happen.
'keyring' lists the package which contains the key used by the source listed in this
Section. If no keyring is specified, the "noauth" option must be set to true. See Secure
Apt.
'suite' is the suite to use from this source. Note that this should be the suite, not the
codename.
Suites change from time to time: (oldstable, stable, testing, sid) The codename (squeeze,
wheezy, jessie, sid) does not change.
Secure Apt
To use authenticated apt repositories, multistrap needs to be able to install an
appropriate keyring package from the existing apt sources outside the multistrap
environment into the destination system. Unfortunately, keyring packages cannot be
downloaded from the repositories specified in the multistrap configuration - this is
because "apt" needs the keyring to be updated before being able to use repositories not
previously known.
If relevant packages exist, specify them in the 'keyring' option for each repository.
multistrap will then check that apt has already installed this package so that the
repository can be authenticated before any packages are downloaded from it.
Note that all repositories to be used with multistrap must be authenticated or apt will
fail. Similarly, secure apt can only be disabled for all repositories (by using the
--no-auth command line option or setting the general noauth option in the configuration
file), even if only one repository does not have a suitable keyring available.
The keyring package(s) will also be installed inside the multistrap environment to match
the installed apt sources for the multistrap.
State
multistrap is stateless - if the directory exists, it will simply proceed as normal and
apt will try to pick up where it left off.
Root Filesystem Configuration
multistrap unpacks the downloaded packages but other stages of system configuration are
not attempted. Examples include:
/etc/inittab
/etc/fstab
/etc/hosts
/etc/securetty
/etc/modules
/etc/hostname
/etc/network/interfaces
/etc/init.d
/etc/dhcp3
Any device-specific device nodes will also need to be created using MAKEDEV or
"device-table.pl" - a helper script that can work around some of the issues with MAKEDEV.
device-table.pl requires a device table file along the lines of the one in the mtd-utils
source package. See /usr/share/doc/multistrap/examples/device_table.txt
Once multistrap has successfully created the basic file and directory layout, other
device-specific scripts are needed before the filesystem can be packaged up and installed
onto the target device.
Once installed, the packages themselves need to be configured using the package maintainer
scripts and "dpkg --configure -a", unless this is a native multistrap.
For "dpkg" to work, /proc and /sysfs must be mounted (or mountable), /dev/pts is also
recommended.
See also: http://wiki.debian.org/Multistrap
Environment
To configure the unpacked packages (whether in native or cross mode), certain environment
variables are needed:
Debconf needs to be told to accept that user interaction is not desired:
DEBIAN_FRONTEND=noninteractive DEBCONF_NONINTERACTIVE_SEEN=true
Perl needs to be told to accept that no locales are available inside the chroot and not to
complain:
LC_ALL=C LANGUAGE=C LANG=C
Then, dpkg can configure the packages:
chroot method (PATH = top directory of chroot):
DEBIAN_FRONTEND=noninteractive DEBCONF_NONINTERACTIVE_SEEN=true \
LC_ALL=C LANGUAGE=C LANG=C chroot /PATH/ dpkg --configure -a
at a login shell:
# export DEBIAN_FRONTEND=noninteractive DEBCONF_NONINTERACTIVE_SEEN=true
# export LC_ALL=C LANGUAGE=C LANG=C
# dpkg --configure -a
(As above, dpkg needs /proc and /sysfs mounted first.)
Native mode - multistrap
multistrap was not intended for native support, it was developed for cross architecture
support. In order for multiple repositories to be used, multistrap only unpacks the
packages selected by apt.
In native mode, various post-multistrap operations are likely to be needed that
debootstrap would do for you:
1. copy /etc/hosts into the chroot
2. clean the environment to unset LANGUAGE, LC_ALL and LANG
to silence nuisance perl warnings that obscure other errors
(An alternative to unset the localisation variables is to add locales to your multistrap
configuration file in the 'packages' option.
A native multistrap can be used directly with chroot, so "multistrap" runs "dpkg
--configure -a" at the end of the multistrap process, unless the ignorenativearch option
is set to true in the General section of the configuration file.
Daemons in chroots
Depending on which system you using to provide the packages for "multistrap", native
chroots should generally not allow daemons to start inside the chroot. Use the
/usr/share/multistrap/chroot.sh as your "setupscript" or include that script in your own
setup script.
setupscript=/usr/share/multistrap/chroot.sh
chroot.sh copes with systems using sysvinit and upstart.
See also
http://people.debian.org/~hmh/invokerc.d-policyrc.d-specification.txt
Cascading configuration
To support multiple variants of a basic (common) configuration, "multistrap" allows
configuration files to include other (more general) configuration files. i.e. the most
detailed / specific configuration file is specified on the command line and that file
includes another file which is shared by other configurations.
Base file:
/usr/share/multistrap/crosschroot.conf
Variations:
/usr/share/multistrap/armel.conf
Specifying just the armel.conf file will get the rest of the settings from
crosschroot.conf so that common changes only need to be made in a single file.
It is strongly recommended that any changes to the configuration files involved in any
particular cascade are tested using the "--simulate" option to multistrap which will
output a summary of the options that have been set once the cascade is complete. Note that
multistrap does not warn you if a configuration file contains an unrecognised option (for
future compatibility with backported configurations), so a simple typo can result in an
option not being set.
Machine:variant support
The old packages.conf variables from emsandbox can all be converted into "multistrap"
configuration variables. The machine:variant support in "multistrap" concentrates on the
scripts, config.sh and setup.sh
Note: machine:variant support is likely to be replaced by the hook functionality described
below.
Once "multistrap" has unpacked the downloaded packages, the "setup.sh" can be called,
passing the location and architecture of the root filesystem, so that other fine tuning
can take place. At this stage, any operations inside a foreign architecture rootfs must
not try to execute any binaries within the rootfs. As the final stage of the multistrap
process, "config.sh" is copied into the root directory of the rootfs.
One advantage of using machine:variant support is that the entire rootfilesystem can be
managed by a single call to multistrap - this is useful when building root filesystems in
userspace.
To enable machine:variant support, specify the path to the scripts to be called in the
variant configuration file (General section):
[General]
include=/path/to/general.conf
setupscript=/path/to/setup.sh
configscript=/path/to/config.sh
Ensure that both the setupscript and the configscript are executable or "multistrap" will
ignore the script.
Example configscript.sh
#!/bin/sh
set -e
export DEBIAN_FRONTEND=noninteractive DEBCONF_NONINTERACTIVE_SEEN=true
export LC_ALL=C LANGUAGE=C LANG=C
/var/lib/dpkg/info/dash.preinst install
dpkg --configure -a
mount proc -t proc /proc
dpkg --configure -a
umount /proc
For more information, see the Wiki: http://wiki.debian.org/Multistrap
Mounting /dev and /proc for chroot configuration
/proc can be mounted inside the chroot, as above:
mount proc -t proc /proc
However, /dev should be mounted from outside the chroot, before running any
"configscript.sh" in the chroot:
cd /path/chroot/
sudo tar -xzf /path/multistrap.tgz
sudo mount /dev -o bind ./dev/
sudo chroot . ./configscript.sh || true
Restricting package selection
"multistrap" includes Required packages by default, the current list of packages on your
own machine can be seen using:
grep-available -FPriority 'required' -sPackage
(The actual list is calculated from the downloaded Packages files and may differ from the
output of "grep-available".)
If the OmitRequired option is set to true, these packages will not be added - whilst
useful, this option can easily lead to a useless rootfs. Only the packages specified
manually in the configuration files will be used in the calculations - dependencies of
those packages will be added but no others.
Adding Priority: important packages
"multistrap" can imitate "debootstrap" by automatically adding all packages from all
sections where the downloaded Packages file lists the package as Priority: important. The
default is not to add such packages unless individually included in a "packages=" option
in a section specified in the "bootstrap" general option. To add all such packages, set
the addimportant option to true in the general section.
addimportant=true
Priority: important can only operate for all sections listed in the "bootstrap" option.
This may cause some confusion when mixing suites.
It is not possible to enable addimportant and omitrequired in the same configuration.
"multistrap" will exit with error code 7 if any configuration results in addimportant and
omitrequired both being set to true. (This includes the effects of including other
configuration files.)
Recommends behaviour
The Debian default behaviour after the Lenny release was to consider recommended packages
as extra packages to be installed when any one package is selected. Recommended packages
are those which the maintainer considers that would be present on "most" installations of
that package and allowing Recommends means allowing Recommends of recommended packages and
so on.
The multistrap default is to turn recommends OFF.
Set the allowrecommends option to true in the General section to use typical Debian
behaviour.
Default release
"multistrap" supports an option to explicitly set the default release to use with apt:
"aptdefaultrelease". This determines which release apt will use for the base system
packages and is not the same as pinning (which relates to the use of apt after
installation). Multistrap sets the default-release to the wildcard * unless a release is
named in the "aptdefaultrelease" field. Any release specified here must also be defined in
a stanza referenced in the bootstrap list or apt will fail.
To install a specific version of a package from a newer release than the one specified as
default, "explicitsuite" must also be set to true if the package exists at any version in
the default release. Also, any packages upon which that package has a strict dependency
(i.e. = rather than >=) must also be explicitly added to the packages line in the stanza
for the desired version, even though that package does not need to be listed to get it
from the default release. This is typical apt behaviour and is not a bug in multistrap.
The combination of default release, explicit suite and apt preferences can quickly become
complex and bugs can be very hard to identify. "multistrap" always outputs the complete
apt command line, so test this command yourself (using the files written out by
"multistrap") to see what is going on. Remember that all dependency resolution and all the
logic to determine which version of a specific package gets installed in your "multistrap"
chroot is entirely down to apt and all "multistrap" can do is pass files and command line
options to apt.
See also: apt preferences.
Explicit suite specification
Sometimes, apt needs to be told to get a particular package from a particular suite,
ignoring a more recent version in another suite in the same set of sources.
"multistrap" can operate with and without the explicit suite option, the default is to let
apt use the most recent version from the collection of specified bootstrap sources.
Explicit suite specification has no effect on the final installed system - if your
aptsources includes a repository which in turn includes a newer version of the package(s)
specified explicitly, the next "apt-get upgrade" on the device will bring in the newer
version.
Also, when specifying packages to get from a specific suite, apt will also try and ensure
that the dependencies for that package are also from the same suite and this can cause apt
to be unable to resolve the complete set of dependencies. In this situation, being
explicit about one package selection may require being explicit about some (not
necessarily all) of the dependencies of that package as well.
When using explicitsuite, take care in using stable-proposed-updates or other temporary
locations - if the package migrates into another suite and is removed from the temporary
suite (as with *-proposed-updates), multistrap will not be able to find the package.
Explicit suite handling can be very hard to get right. In general, it is best to create a
small bootstrap chroot of your native arch, then chroot into it, add the relevant apt
sources and work out exactly what commands are necessary to get the correct mix of
packages. Avoid specifying explicit versions to sort out problems, work with suites only.
Apt preferences / pinning may be useful here, see Apt preferences.
Apt preferences
If a suitable file is listed in the aptpreferences option of the General section of the
configuration file, this file will be copied into the apt preferences directory of the
bootstrap before apt is first used.
When an apt preferences file is provided, the "Default-Release" behaviour of "multistrap"
is disabled.
As with other external scripts and files, the content of the apt preferences file is
beyond the scope of this manpage. "multistrap" does not try to verify the supplied file
other than ensuring that it can be read.
Omitting deb-src listings
Some multistrap environments do not need access to the Debian sources of packages being
installed, typically this is required when preparing a build (or cross-build) chroot using
multistrap.
To turn off this additional source (and save both download time and apt-cache size), use
the omitdebsrc field in each Section.
[Baked]
packages=
source=http://www.emdebian.org/baked
keyring=emdebian-archive-keyring
suite=testing
omitdebsrc=true
omitdebsrc is necessary when using packages from debian-ports where packages do not have
sources, except "unreleased".
fakeroot
Foreign architecture bootstraps can operate under "fakeroot" ("multistrap" is designed to
do as much as it can within a single call to make this easier) but the configuration stage
which normally happens with a native architecture bootstrap requires "chroot" and "chroot"
itself will not operate under "fakeroot".
Therefore, if "multistrap" detects that "fakeroot" is in use, native mode configuration is
skipped with a reminder warning.
The same problem applies to "apt-get install" and therefore the installation of the
keyring package on the host system is also skipped if fakeroot is detected.
Handling problematic packages
Sometimes, a particular package will fail to even unpack properly if other packages have
not already been unpacked. This can happen if dpkg diversions are not setup correctly or
if the package Pre-Depends on an executable in another package.
Multistrap offers two ways to handle these problems. A package can be listed as
"reinstall" or as "additional". Each section in the "multistrap" configuration file can
have a single "reinstall" or "additional" listing or both.
Reinstall means that the package will be downloaded and unpacked as normal - alongside all
the other packages, but will then be reinstalled at the end by running the "preinst"
maintainer script with the "upgrade" argument. "dpkg" will then continue the rest of the
configuration of that package.
Additional adds a second round of "apt-get install" to the multistrap process - after the
initial unpacking. The additional package will then be downloaded and unpacked. If running
natively, the additional package is downloaded, unpacked and configured after all the rest
of the packages have been downloaded, unpacked and configured.
Neither "reinstall" nor "additional" should be seen as more than just workarounds and
wishlist bugs should be filed in Debian against packages which require the use of these
mechanisms (or the packages which would prevent the particular package from operating
normally).
Debconf preseeding
Adding a debconf seed can help in configuring packages to a particular setting instead of
the package default when running the configuration non-interactively. See
http://www.debian-administration.org/articles/394 for information on how to create seed
files.
Multiple seed files can be specified using the debconfseed field in the [General] section,
separated by spaces:
debconfseed=seed1 seed2
Files which do not exist or which cannot be opened will be silently ignored. Check the
results of the parsing using the "--simulate" option to "multistrap". The preseeding files
will be copied to a preseed directory in /tmp inside the rootfs.
To use the preseeding, add a section to the configscript.sh, prior to any calls to dpkg
--configure -a. e.g. :
#!/bin/sh
set -e
export DEBIAN_FRONTEND=noninteractive DEBCONF_NONINTERACTIVE_SEEN=true
export LC_ALL=C LANGUAGE=C LANG=C
if [ -d /tmp/preseeds/ ]; then
for file in `ls -1 /tmp/preseeds/*`; do
debconf-set-selections $file
done
fi
dpkg --configure -a
Hooks
If a hook directory (hookdir=) is specified in the General section of the "multistrap"
configuration file, the hook scripts which are executable will be run from outside the
multistrap directory at the following stages:
download hooks
Executed before unpacking is started, immediately after the packages have been
downloaded. Download hooks are executable scripts in the specified hook directory with a
filename beginning with download.
native hooks
Native hook scripts are executed only in native mode, immediately before starting the
configuration of the downloaded packages and again upon completion of the package
configuration. Native hooks will be called the absolute path and the current progress
state, start or end.
Native scripts are executable scripts in the specified hook directory with a filename
beginning with native.
completion hooks
Executed immediately before the tarball is created or "multistrap" exits if not
configured to create a tarball.
Completion scripts are executable scripts in the specified hook directory with a filename
beginning with completion.
Hooks are passed the absolute path to the directory which will be the top level directory
of the chroot or multistrap system. Hooks which cannot be resolved using realpath or which
are not executable will be ignored.
All hooks of one type are sorted into alphabetical order before being run.
Note that "multistrap" does not rollback the effects of hooks in the case of errors.
However, "multistrap" will report the accumulated errors as warnings. If a hook exits non-
zero, the exit value is converted to a positive number and added to the total warning
count, reported at the end of the operation.
Output
"multistrap" can produce a lot of output - informational messages appear on STDOUT, errors
and warnings on STDERR. Calls to "apt" and "dpkg" respect the same pattern, so it is
simple to trim the combined "multistrap" output to just the errors, if desired.
"multistrap" accumulates error states from non-fatal processes within the operation and
reports these as warnings on STDERR as well as exiting with the accumulated error count.
This includes hooks which report non-zero exit values.
Bugs
As "multistrap" gets more complex, bugs will creep into the package. Please report all
bugs to the Debian BTS using the "reportbug" tool and please attach all configuration
files. If your configuration needs to access local or private apt repositories, please
check your configuration with the latest version of "multistrap" in Debian using the
"--simulate" option and include that report in your bug report.
The "--simulate" option output is regularly expanded to help users debug problems in the
configuration files.
Please also check (and update) the Multistrap wiki at http://wiki.debian.org/Multistrap
and the Multistrap webpage content at http://www.emdebian.org/multistrap/ before filing
bugs. Various people on the debian-embedded@lists.debian.org mailing list and #emdebian
IRC channel on irc.oftc.net can also help if your config file does not parse correctly.
You would need to put the "--simulate" output on a pastebin website and put the URL in
your message.
MultiArch support
Multiarch support is experimental - please report issues and file bugs with full details
of your setup, the full multistrap config file and the errors reported.
"multistrap" overrides the existing multiarch support of the external system so that a
MultiArch aware system can still create a non-MultiArch chroot from repositories which do
not support all of the architectures supported by the external dpkg.
If multiarch is enabled within the multistrap chroot, "multistrap" writes out the list
into /var/lib/dpkg/arch inside the chroot.
For multiple architectures, specify the option once and use a space separated list for the
architecture list. Ensure you include what will be the host architecture of the chroot.
See also http://wiki.debian.org/Multiarch/
[General]
...
multiarch=i386 armel armhf
Each Section will install packages from the base architecture unless the "Architecture"
option is specified for particular sections.
[Foreign]
packages=libgcc1 libc6
architecture=armel
source=http://ftp.uk.debian.org/debian
keyring=debian-archive-keyring
suite=sid
In the "--simulate" output, the architecture(s) specified in the MultiArch option will be
listed under the "Foreign architectures" listing. Packages for a specific architecture
will be listed as the package name followed by a colon followed by the architecture.
libgcc1:armel libc6:armel