Provided by: percona-toolkit_3.0.6+dfsg-2_all 
NAME
pt-heartbeat - Monitor MySQL replication delay.
SYNOPSIS
Usage: pt-heartbeat [OPTIONS] [DSN] --update|--monitor|--check|--stop
pt-heartbeat measures replication lag on a MySQL or PostgreSQL server. You can use it to update a master
or monitor a replica. If possible, MySQL connection options are read from your .my.cnf file.
Start daemonized process to update test.heartbeat table on master:
pt-heartbeat -D test --update -h master-server --daemonize
Monitor replication lag on slave:
pt-heartbeat -D test --monitor -h slave-server
pt-heartbeat -D test --monitor -h slave-server --dbi-driver Pg
Check slave lag once and exit (using optional DSN to specify slave host):
pt-heartbeat -D test --check h=slave-server
RISKS
Percona Toolkit is mature, proven in the real world, and well tested, but all database tools can pose a
risk to the system and the database server. Before using this tool, please:
• Read the tool's documentation
• Review the tool's known "BUGS"
• Test the tool on a non-production server
• Backup your production server and verify the backups
DESCRIPTION
pt-heartbeat is a two-part MySQL and PostgreSQL replication delay monitoring system that measures delay
by looking at actual replicated data. This avoids reliance on the replication mechanism itself, which is
unreliable. (For example, "SHOW SLAVE STATUS" on MySQL).
The first part is an "--update" instance of pt-heartbeat that connects to a master and updates a
timestamp ("heartbeat record") every "--interval" seconds. Since the heartbeat table may contain records
from multiple masters (see "MULTI-SLAVE HIERARCHY"), the server's ID (@@server_id) is used to identify
records.
The second part is a "--monitor" or "--check" instance of pt-heartbeat that connects to a slave, examines
the replicated heartbeat record from its immediate master or the specified "--master-server-id", and
computes the difference from the current system time. If replication between the slave and the master is
delayed or broken, the computed difference will be greater than zero and potentially increase if
"--monitor" is specified.
You must either manually create the heartbeat table on the master or use "--create-table". See
"--create-table" for the proper heartbeat table structure. The "MEMORY" storage engine is suggested, but
not required of course, for MySQL.
The heartbeat table must contain a heartbeat row. By default, a heartbeat row is inserted if it doesn't
exist. This feature can be disabled with the "--[no]insert-heartbeat-row" option in case the database
user does not have INSERT privileges.
pt-heartbeat depends only on the heartbeat record being replicated to the slave, so it works regardless
of the replication mechanism (built-in replication, a system such as Continuent Tungsten, etc). It works
at any depth in the replication hierarchy; for example, it will reliably report how far a slave lags its
master's master's master. And if replication is stopped, it will continue to work and report
(accurately!) that the slave is falling further and further behind the master.
pt-heartbeat has a maximum resolution of 0.01 second. The clocks on the master and slave servers must be
closely synchronized via NTP. By default, "--update" checks happen on the edge of the second (e.g.
00:01) and "--monitor" checks happen halfway between seconds (e.g. 00:01.5). As long as the servers'
clocks are closely synchronized and replication events are propagating in less than half a second, pt-
heartbeat will report zero seconds of delay.
pt-heartbeat will try to reconnect if the connection has an error, but will not retry if it can't get a
connection when it first starts.
The "--dbi-driver" option lets you use pt-heartbeat to monitor PostgreSQL as well. It is reported to
work well with Slony-1 replication.
MULTI-SLAVE HIERARCHY
If the replication hierarchy has multiple slaves which are masters of other slaves, like "master ->
slave1 -> slave2", "--update" instances can be ran on the slaves as well as the master. The default
heartbeat table (see "--create-table") is keyed on the "server_id" column, so each server will update the
row where "server_id=@@server_id".
For "--monitor" and "--check", if "--master-server-id" is not specified, the tool tries to discover and
use the slave's immediate master. If this fails, or if you want monitor lag from another master, then
you can specify the "--master-server-id" to use.
For example, if the replication hierarchy is "master -> slave1 -> slave2" with corresponding server IDs
1, 2 and 3, you can:
pt-heartbeat --daemonize -D test --update -h master
pt-heartbeat --daemonize -D test --update -h slave1
Then check (or monitor) the replication delay from master to slave2:
pt-heartbeat -D test --master-server-id 1 --check slave2
Or check the replication delay from slave1 to slave2:
pt-heartbeat -D test --master-server-id 2 --check slave2
Stopping the "--update" instance one slave1 will not affect the instance on master.
MASTER AND SLAVE STATUS
The default heartbeat table (see "--create-table") has columns for saving information from "SHOW MASTER
STATUS" and "SHOW SLAVE STATUS". These columns are optional. If any are present, their corresponding
information will be saved.
Percona XtraDB Cluster
Although pt-heartbeat should work with all supported versions of Percona XtraDB Cluster (PXC), we
recommend using 5.5.28-23.7 and newer.
If you are setting up heartbeat instances between cluster nodes, keep in mind that, since the speed of
the cluster is determined by its slowest node, pt-heartbeat will not report how fast the cluster itself
is, but only how fast events are replicating from one node to another.
You must specify "--master-server-id" for "--monitor" and "--check" instances.
OPTIONS
Specify at least one of "--stop", "--update", "--monitor", or "--check".
"--update", "--monitor", and "--check" are mutually exclusive.
"--daemonize" and "--check" are mutually exclusive.
This tool accepts additional command-line arguments. Refer to the "SYNOPSIS" and usage information for
details.
--ask-pass
Prompt for a password when connecting to MySQL.
--charset
short form: -A; type: string
Default character set. If the value is utf8, sets Perl's binmode on STDOUT to utf8, passes the
mysql_enable_utf8 option to DBD::mysql, and runs SET NAMES UTF8 after connecting to MySQL. Any other
value sets binmode on STDOUT without the utf8 layer, and runs SET NAMES after connecting to MySQL.
--check
Check slave delay once and exit. If you also specify "--recurse", the tool will try to discover
slave's of the given slave and check and print their lag, too. The hostname or IP and port for each
slave is printed before its delay. "--recurse" only works with MySQL.
--check-read-only
Check if the server has read_only enabled; If it does, the tool skips doing any inserts.
--config
type: Array
Read this comma-separated list of config files; if specified, this must be the first option on the
command line.
--create-table
Create the heartbeat "--table" if it does not exist.
This option causes the table specified by "--database" and "--table" to be created with the following
MAGIC_create_heartbeat table definition:
CREATE TABLE heartbeat (
ts varchar(26) NOT NULL,
server_id int unsigned NOT NULL PRIMARY KEY,
file varchar(255) DEFAULT NULL, -- SHOW MASTER STATUS
position bigint unsigned DEFAULT NULL, -- SHOW MASTER STATUS
relay_master_log_file varchar(255) DEFAULT NULL, -- SHOW SLAVE STATUS
exec_master_log_pos bigint unsigned DEFAULT NULL -- SHOW SLAVE STATUS
);
The heartbeat table requires at least one row. If you manually create the heartbeat table, then you
must insert a row by doing:
INSERT INTO heartbeat (ts, server_id) VALUES (NOW(), N);
or if using "--utc":
INSERT INTO heartbeat (ts, server_id) VALUES (UTC_TIMESTAMP(), N);
where "N" is the server's ID; do not use @@server_id because it will replicate and slaves will insert
their own server ID instead of the master's server ID.
This is done automatically by "--create-table".
A legacy version of the heartbeat table is still supported:
CREATE TABLE heartbeat (
id int NOT NULL PRIMARY KEY,
ts datetime NOT NULL
);
Legacy tables do not support "--update" instances on each slave of a multi-slave hierarchy like
"master -> slave1 -> slave2". To manually insert the one required row into a legacy table:
INSERT INTO heartbeat (id, ts) VALUES (1, NOW());
or if using "--utc":
INSERT INTO heartbeat (id, ts) VALUES (1, UTC_TIMESTAMP());
The tool automatically detects if the heartbeat table is legacy.
See also "MULTI-SLAVE HIERARCHY".
--create-table-engine
type: string
Sets the engine to be used for the heartbeat table. The default storage engine is InnoDB as of MySQL
5.5.5.
--daemonize
Fork to the background and detach from the shell. POSIX operating systems only.
--database
short form: -D; type: string
The database to use for the connection.
--dbi-driver
default: mysql; type: string
Specify a driver for the connection; "mysql" and "Pg" are supported.
--defaults-file
short form: -F; type: string
Only read mysql options from the given file. You must give an absolute pathname.
--file
type: string
Print latest "--monitor" output to this file.
When "--monitor" is given, prints output to the specified file instead of to STDOUT. The file is
opened, truncated, and closed every interval, so it will only contain the most recent statistics.
Useful when "--daemonize" is given.
--frames
type: string; default: 1m,5m,15m
Timeframes for averages.
Specifies the timeframes over which to calculate moving averages when "--monitor" is given. Specify
as a comma-separated list of numbers with suffixes. The suffix can be s for seconds, m for minutes,
h for hours, or d for days. The size of the largest frame determines the maximum memory usage, as up
to the specified number of per-second samples are kept in memory to calculate the averages. You can
specify as many timeframes as you like.
--help
Show help and exit.
--host
short form: -h; type: string
Connect to host.
--[no]insert-heartbeat-row
default: yes
Insert a heartbeat row in the "--table" if one doesn't exist.
The heartbeat "--table" requires a heartbeat row, else there's nothing to "--update", "--monitor", or
"--check"! By default, the tool will insert a heartbeat row if one is not already present. You can
disable this feature by specifying "--no-insert-heartbeat-row" in case the database user does not
have INSERT privileges.
--interval
type: float; default: 1.0
How often to update or check the heartbeat "--table". Updates and checks begin on the first whole
second then repeat every "--interval" seconds for "--update" and every "--interval" plus "--skew"
seconds for "--monitor".
For example, if at 00:00.4 an "--update" instance is started at 0.5 second intervals, the first
update happens at 00:01.0, the next at 00:01.5, etc. If at 00:10.7 a "--monitor" instance is started
at 0.05 second intervals with the default 0.5 second "--skew", then the first check happens at
00:11.5 (00:11.0 + 0.5) which will be "--skew" seconds after the last update which, because the
instances are checking at synchronized intervals, happened at 00:11.0.
The tool waits for and begins on the first whole second just to make the interval calculations
simpler. Therefore, the tool could wait up to 1 second before updating or checking.
The minimum (fastest) interval is 0.01, and the maximum precision is two decimal places, so 0.015
will be rounded to 0.02.
If a legacy heartbeat table (see "--create-table") is used, then the maximum precision is 1s because
the "ts" column is type "datetime".
--log
type: string
Print all output to this file when daemonized.
--master-server-id
type: string
Calculate delay from this master server ID for "--monitor" or "--check". If not given, pt-heartbeat
attempts to connect to the server's master and determine its server id.
--monitor
Monitor slave delay continuously.
Specifies that pt-heartbeat should check the slave's delay every second and report to STDOUT (or if
"--file" is given, to the file instead). The output is the current delay followed by moving averages
over the timeframe given in "--frames". For example,
5s [ 0.25s, 0.05s, 0.02s ]
--password
short form: -p; type: string
Password to use when connecting. If password contains commas they must be escaped with a backslash:
"exam\,ple"
--pid
type: string
Create the given PID file. The tool won't start if the PID file already exists and the PID it
contains is different than the current PID. However, if the PID file exists and the PID it contains
is no longer running, the tool will overwrite the PID file with the current PID. The PID file is
removed automatically when the tool exits.
--port
short form: -P; type: int
Port number to use for connection.
--print-master-server-id
Print the auto-detected or given "--master-server-id". If "--check" or "--monitor" is specified,
specifying this option will print the auto-detected or given "--master-server-id" at the end of each
line.
--recurse
type: int
Check slaves recursively to this depth in "--check" mode.
Try to discover slave servers recursively, to the specified depth. After discovering servers, run
the check on each one of them and print the hostname (if possible), followed by the slave delay.
This currently works only with MySQL. See "--recursion-method".
--recursion-method
type: array; default: processlist,hosts
Preferred recursion method used to find slaves.
Possible methods are:
METHOD USES
=========== ==================
processlist SHOW PROCESSLIST
hosts SHOW SLAVE HOSTS
none Do not find slaves
The processlist method is preferred because SHOW SLAVE HOSTS is not reliable. However, the hosts
method is required if the server uses a non-standard port (not 3306). Usually pt-heartbeat does the
right thing and finds the slaves, but you may give a preferred method and it will be used first. If
it doesn't find any slaves, the other methods will be tried.
--replace
Use "REPLACE" instead of "UPDATE" for --update.
When running in "--update" mode, use "REPLACE" instead of "UPDATE" to set the heartbeat table's
timestamp. The "REPLACE" statement is a MySQL extension to SQL. This option is useful when you
don't know whether the table contains any rows or not. It must be used in conjunction with --update.
--run-time
type: time
Time to run before exiting.
--sentinel
type: string; default: /tmp/pt-heartbeat-sentinel
Exit if this file exists.
--slave-user
type: string
Sets the user to be used to connect to the slaves. This parameter allows you to have a different
user with less privileges on the slaves but that user must exist on all slaves.
--slave-password
type: string
Sets the password to be used to connect to the slaves. It can be used with --slave-user and the
password for the user must be the same on all slaves.
--set-vars
type: Array
Set the MySQL variables in this comma-separated list of "variable=value" pairs.
By default, the tool sets:
wait_timeout=10000
Variables specified on the command line override these defaults. For example, specifying "--set-vars
wait_timeout=500" overrides the defaultvalue of 10000.
The tool prints a warning and continues if a variable cannot be set.
--skew
type: float; default: 0.5
How long to delay checks.
The default is to delay checks one half second. Since the update happens as soon as possible after
the beginning of the second on the master, this allows one half second of replication delay before
reporting that the slave lags the master by one second. If your clocks are not completely accurate
or there is some other reason you'd like to delay the slave more or less, you can tweak this value.
Try setting the "PTDEBUG" environment variable to see the effect this has.
--socket
short form: -S; type: string
Socket file to use for connection.
--stop
Stop running instances by creating the sentinel file.
This should have the effect of stopping all running instances which are watching the same sentinel
file. If none of "--update", "--monitor" or "--check" is specified, "pt-heartbeat" will exit after
creating the file. If one of these is specified, "pt-heartbeat" will wait the interval given by
"--interval", then remove the file and continue working.
You might find this handy to stop cron jobs gracefully if necessary, or to replace one running
instance with another. For example, if you want to stop and restart "pt-heartbeat" every hour (just
to make sure that it is restarted every hour, in case of a server crash or some other problem), you
could use a "crontab" line like this:
0 * * * * pt-heartbeat --update -D test --stop \
--sentinel /tmp/pt-heartbeat-hourly
The non-default "--sentinel" will make sure the hourly "cron" job stops only instances previously
started with the same options (that is, from the same "cron" job).
See also "--sentinel".
--table
type: string; default: heartbeat
The table to use for the heartbeat.
Don't specify database.table; use "--database" to specify the database.
See "--create-table".
--update
Update a master's heartbeat.
--user
short form: -u; type: string
User for login if not current user.
--utc
Ignore system time zones and use only UTC. By default pt-heartbeat does not check or adjust for
different system or MySQL time zones which can cause the tool to compute the lag incorrectly.
Specifying this option is a good idea because it ensures that the tool works correctly regardless of
time zones.
If used, this option must be used for all pt-heartbeat instances: "--update", "--monitor", "--check",
etc. You should probably set the option in a "--config" file. Mixing this option with pt-heartbeat
instances not using this option will cause false-positive lag readings due to different time zones
(unless all your systems are set to use UTC, in which case this option isn't required).
--version
Show version and exit.
--[no]version-check
default: yes
Check for the latest version of Percona Toolkit, MySQL, and other programs.
This is a standard "check for updates automatically" feature, with two additional features. First,
the tool checks the version of other programs on the local system in addition to its own version.
For example, it checks the version of every MySQL server it connects to, Perl, and the Perl module
DBD::mysql. Second, it checks for and warns about versions with known problems. For example, MySQL
5.5.25 had a critical bug and was re-released as 5.5.25a.
Any updates or known problems are printed to STDOUT before the tool's normal output. This feature
should never interfere with the normal operation of the tool.
For more information, visit <https://www.percona.com/version-check>.
DSN OPTIONS
These DSN options are used to create a DSN. Each option is given like "option=value". The options are
case-sensitive, so P and p are not the same option. There cannot be whitespace before or after the "="
and if the value contains whitespace it must be quoted. DSN options are comma-separated. See the
percona-toolkit manpage for full details.
• A
dsn: charset; copy: yes
Default character set.
• D
dsn: database; copy: yes
Default database.
• F
dsn: mysql_read_default_file; copy: yes
Only read default options from the given file
• h
dsn: host; copy: yes
Connect to host.
• p
dsn: password; copy: yes
Password to use when connecting. If password contains commas they must be escaped with a backslash:
"exam\,ple"
• P
dsn: port; copy: yes
Port number to use for connection.
• S
dsn: mysql_socket; copy: yes
Socket file to use for connection.
• u
dsn: user; copy: yes
User for login if not current user.
ENVIRONMENT
The environment variable "PTDEBUG" enables verbose debugging output to STDERR. To enable debugging and
capture all output to a file, run the tool like:
PTDEBUG=1 pt-heartbeat ... > FILE 2>&1
Be careful: debugging output is voluminous and can generate several megabytes of output.
SYSTEM REQUIREMENTS
You need Perl, DBI, DBD::mysql, and some core packages that ought to be installed in any reasonably new
version of Perl.
BUGS
For a list of known bugs, see <http://www.percona.com/bugs/pt-heartbeat>.
Please report bugs at <https://bugs.launchpad.net/percona-toolkit>. Include the following information in
your bug report:
• Complete command-line used to run the tool
• Tool "--version"
• MySQL version of all servers involved
• Output from the tool including STDERR
• Input files (log/dump/config files, etc.)
If possible, include debugging output by running the tool with "PTDEBUG"; see "ENVIRONMENT".
DOWNLOADING
Visit <http://www.percona.com/software/percona-toolkit/> to download the latest release of Percona
Toolkit. Or, get the latest release from the command line:
wget percona.com/get/percona-toolkit.tar.gz
wget percona.com/get/percona-toolkit.rpm
wget percona.com/get/percona-toolkit.deb
You can also get individual tools from the latest release:
wget percona.com/get/TOOL
Replace "TOOL" with the name of any tool.
AUTHORS
Proven Scaling LLC, SixApart Ltd, Baron Schwartz, and Daniel Nichter
ABOUT PERCONA TOOLKIT
This tool is part of Percona Toolkit, a collection of advanced command-line tools for MySQL developed by
Percona. Percona Toolkit was forked from two projects in June, 2011: Maatkit and Aspersa. Those
projects were created by Baron Schwartz and primarily developed by him and Daniel Nichter. Visit
<http://www.percona.com/software/> to learn about other free, open-source software from Percona.
COPYRIGHT, LICENSE, AND WARRANTY
This program is copyright 2007-2017 Percona LLC and/or its affiliates, 2006 Proven Scaling LLC and Six
Apart Ltd.
Feedback and improvements are welcome.
THIS PROGRAM IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT
LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
This program is free software; you can redistribute it and/or modify it under the terms of the GNU
General Public License as published by the Free Software Foundation, version 2; OR the Perl Artistic
License. On UNIX and similar systems, you can issue `man perlgpl' or `man perlartistic' to read these
licenses.
You should have received a copy of the GNU General Public License along with this program; if not, write
to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
VERSION
pt-heartbeat 3.0.6
perl v5.26.1 2018-02-14 PT-HEARTBEAT(1p)