Provided by: grass-doc_7.4.0-1_all 
NAME
r.cost - Creates a raster map showing the cumulative cost of moving between different geographic
locations on an input raster map whose cell category values represent cost.
KEYWORDS
raster, cost surface, cumulative costs, cost allocation
SYNOPSIS
r.cost
r.cost --help
r.cost [-knri] input=name output=name [nearest=name] [outdir=name] [start_points=name]
[stop_points=name] [start_raster=name] [start_coordinates=east,north[,east,north,...]]
[stop_coordinates=east,north[,east,north,...]] [max_cost=value] [null_cost=value] [memory=value]
[--overwrite] [--help] [--verbose] [--quiet] [--ui]
Flags:
-k
Use the ’Knight’s move’; slower, but more accurate
-n
Keep null values in output raster map
-r
Start with values in raster map
-i
Print info about disk space and memory requirements and exit
--overwrite
Allow output files to overwrite existing files
--help
Print usage summary
--verbose
Verbose module output
--quiet
Quiet module output
--ui
Force launching GUI dialog
Parameters:
input=name [required]
Name of input raster map containing grid cell cost information
output=name [required]
Name for output raster map
nearest=name
Name for output raster map with nearest start point
outdir=name
Name for output raster map to contain movement directions
start_points=name
Name of starting vector points map
Or data source for direct OGR access
stop_points=name
Name of stopping vector points map
Or data source for direct OGR access
start_raster=name
Name of starting raster points map
start_coordinates=east,north[,east,north,...]
Coordinates of starting point(s) (E,N)
stop_coordinates=east,north[,east,north,...]
Coordinates of stopping point(s) (E,N)
max_cost=value
Maximum cumulative cost
Default: 0
null_cost=value
Cost assigned to null cells. By default, null cells are excluded
memory=value
Maximum memory to be used in MB
Default: 300
DESCRIPTION
r.cost determines the cumulative cost of moving to each cell on a cost surface (the input raster map)
from other user-specified cell(s) whose locations are specified by their geographic coordinate(s). Each
cell in the original cost surface map will contain a category value which represents the cost of
traversing that cell. r.cost will produce 1) an output raster map in which each cell contains the lowest
total cost of traversing the space between each cell and the user-specified points (diagonal costs are
multiplied by a factor that depends on the dimensions of the cell) and 2) a second raster map layer
showing the movement direction to the next cell on the path back to the start point (see Movement
Direction). This module uses the current geographic region settings. The output map will be of the same
data format as the input map, integer or floating point.
OPTIONS
The input name is the name of a raster map whose category values represent the surface cost. The output
name is the name of the resultant raster map of cumulative cost. The outdir name is the name of the
resultant raster map of movement directions (see Movement Direction).
r.cost can be run with three different methods of identifying the starting point(s). One or more points
(geographic coordinate pairs) can be provided as specified start_coordinates on the command line, from a
vector points file, or from a raster map. All non-NULL cells are considered to be starting points.
Each x,y start_coordinates pair gives the geographic location of a point from which the transportation
cost should be figured. As many points as desired can be entered by the user. These starting points can
also be read from a vector points file through the start_points option or from a raster map through the
start_raster option.
r.cost will stop cumulating costs when either max_cost is reached, or one of the stop points given with
stop_coordinates is reached. Alternatively, the stop points can be read from a vector points file with
the stop_points option. During execution, once the cumulative cost to all stopping points has been
determined, processing stops.
Both sites read from a vector points file and those given on the command line will be processed.
The null cells in the input map can be assigned a (positive floating point) cost with the null_cost
option.
When input map null cells are given a cost with the null_cost option, the corresponding cells in the
output map are no longer null cells. By using the -n flag, the null cells of the input map are retained
as null cells in the output map.
As r.cost can run for a very long time, it can be useful to use the --v verbose flag to track progress.
The Knight’s move (-k flag) may be used to improve the accuracy of the output. In the diagram below, the
center location (O) represents a grid cell from which cumulative distances are calculated. Those
neighbors marked with an X are always considered for cumulative cost updates. With the -k option, the
neighbors marked with a K are also considered.
. . . . . . . . . . . . . . .
. . . K . . K . . .
. . . . . . . . . . . . . . .
. . K . X . X . X . K . .
. . . . . . . . . . . . . . .
. . . X . O . X . . .
. . . . . . . . . . . . . . .
. . K . X . X . X . K . .
. . . . . . . . . . . . . . .
. . . K . . K . . .
. . . . . . . . . . . . . . .
Knight’s move example:
Flat cost surface without (left pane) and with the knight’s
move (right pane). The default is to grow the cost outwards
in 8 directions. Using the knight’s move grows it outwards
in 16 directions.
If the nearest output parameter is specified, the module will calculate for each cell its nearest
starting point based on the minimized accumulative cost while moving over the cost map.
NULL CELLS
By default null cells in the input raster map are excluded from the algorithm, and thus retained in the
output map.
If one wants r.cost to transparently cross any region of null cells, the null_cost=0.0 option should be
used. Then null cells just propagate the adjacent costs. These cells can be retained as null cells in the
output map by using the -n flag.
NOTES
Sometimes, when the differences among integer cell category values in the r.cost cumulative cost surface
output are small, this cumulative cost output cannot accurately be used as input to r.drain (r.drain will
output bad results). This problem can be circumvented by making the differences between cell category
values in the cumulative cost output bigger. It is recommended that, if the output from r.cost is to be
used as input to r.drain, the user multiply the input cost surface map to r.cost by the value of the
map’s cell resolution, before running r.cost. This can be done using r.mapcalc. The map resolution can be
found using g.region. This problem doesn’t arise with floating point maps.
Algorithm notes
The fundamental approach to calculating minimum travel cost is as follows:
The user generates a raster map indicating the cost of traversing each cell in the north-south and
east-west directions. This map, along with a set of starting points are submitted to r.cost. The
starting points are put into a list cells from which costs to the adjacent cells are to be calculated.
The cell on the list with the lowest cumulative cost is selected for computing costs to the neighboring
cells. Costs are computed and those cells are put on the list and the originating cell is finalized. This
process of selecting the lowest cumulative cost cell, computing costs to the neighbors, putting the
neighbors on the list and removing the originating cell from the list continues until the list is empty.
The most time consuming aspect of this algorithm is the management of the list of cells for which
cumulative costs have been at least initially computed. r.cost uses a binary tree with an linked list at
each node in the tree for efficiently holding cells with identical cumulative costs.
r.cost, like most all GRASS raster programs, is also made to be run on maps larger that can fit in
available computer memory. As the algorithm works through the dynamic list of cells it can move almost
randomly around the entire area. r.cost divides the entire area into a number of pieces and swaps these
pieces in and out of memory (to and from disk) as needed. This provides a virtual memory approach
optimally designed for 2-D raster maps. The amount of memory to be used by r.cost can be controlled with
the memory option, default is 300 MB. For systems with less memory this value will have to be set to a
lower value.
EXAMPLES
Consider the following example:
Input:
COST SURFACE
. . . . . . . . . . . . . . .
. 2 . 2 . 1 . 1 . 5 . 5 . 5 .
. . . . . . . . . . . . . . .
. 2 . 2 . 8 . 8 . 5 . 2 . 1 .
. . . . . . . . . . . . . . .
. 7 . 1 . 1 . 8 . 2 . 2 . 2 .
. . . . . . . . . . . . . . .
. 8 . 7 . 8 . 8 . 8 . 8 . 5 .
. . . . . . . . . . _____ . .
. 8 . 8 . 1 . 1 . 5 | 3 | 9 .
. . . . . . . . . . |___| . .
. 8 . 1 . 1 . 2 . 5 . 3 . 9 .
. . . . . . . . . . . . . . .
Output (using -k): Output (not using -k):
CUMULATIVE COST SURFACE CUMULATIVE COST SURFACE
. . . . . . . . . . . . . . . . . . . * * * * * . . . . . .
. 21. 21. 20. 19. 17. 15. 14. . 22. 21* 21* 20* 17. 15. 14.
. . . . . . . . . . . . . . . . . . . * * * * * . . . . . .
. 20. 19. 22. 19. 15. 12. 11. . 20. 19. 22* 20* 15. 12. 11.
. . . . . . . . . . . . . . . . . . . . . * * * * * . . . .
. 22. 18. 17. 17. 12. 11. 9. . 22. 18. 17* 18* 13* 11. 9.
. . . . . . . . . . . . . . . . . . . . . * * * * * . . . .
. 21. 14. 13. 12. 8. 6. 6. . 21. 14. 13. 12. 8. 6. 6.
. . . . . . . . . . _____. . . . . . . . . . . . . . . . .
. 16. 13. 8. 7. 4 | 0 | 6. . 16. 13. 8. 7 . 4. 0. 6.
. . . . . . . . . . |___|. . . . . . . . . . . . . . . . .
. 14. 9. 8. 9. 6. 3. 8. . 14. 9. 8. 9 . 6. 3. 8.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The user-provided starting location in the above example is the boxed 3 in the above input map. The costs
in the output map represent the total cost of moving from each box ("cell") to one or more (here, only
one) starting location(s). Cells surrounded by asterisks are those that are different between operations
using and not using the Knight’s move (-k) option.
Output analysis
The output map can be viewed, for example, as an elevation model in which the starting location(s) is/are
the lowest point(s). Outputs from r.cost can be used as inputs to r.drain with the direction flag -d, in
order to trace the least-cost path given by this model between any given cell and the r.cost starting
location(s). The two programs, when used together, generate least-cost paths or corridors between any two
map locations (cells).
Shortest distance surfaces
The r.cost module allows for computing the shortest distance of each pixel from raster lines, such as
determining the shortest distances of households to the nearby road. For this cost surfaces with cost
value 1 are used. The calculation is done with r.cost as follows (example for Spearfish region):
g.region raster=roads -p
r.mapcalc "area.one = 1"
r.cost -k input=area.one output=distance start_raster=roads
d.rast distance
d.rast.num distance
#transform to metric distance from cell distance using the raster resolution:
r.mapcalc "dist_meters = distance * (ewres()+nsres())/2."
d.rast dist_meters
Movement Direction
The movement direction surface is created to record the sequence of movements that created the cost
accumulation surface. Without it r.drain would not correctly create a path from an end point back to the
start point. The direction of each cell points towards the next cell. The directions are recorded as
degrees CCW from East:
112.5 67.5 i.e. a cell with the value 135
157.5 135 90 45 22.5 means the next cell is to the north-west
180 x 360
202.5 225 270 315 337.5
247.5 292.5
Cost allocation
Example: calculation of the cost allocation map "costalloc" and the cumulative cost map "costsurf" for
given starting points (map "sources") and given cost raster map "costs":
r.cost input=costs start_raster=sources output=costsurf nearest=costalloc
Find the minimum cost path
Once r.cost computes the cumulative cost map, r.drain can be used to find the minimum cost path. Make
sure to use the -d flag and the movement direction raster map when running r.drain to ensure the path is
computed according to the proper movement directions.
SEE ALSO
r.drain, r.walk, r.in.ascii, r.mapcalc, r.out.ascii
AUTHOR
Antony Awaida, Intelligent Engineering Systems Laboratory, M.I.T.
James Westervelt, U.S.Army Construction Engineering Research Laboratory
Updated for Grass 5 by Pierre de Mouveaux (pmx@audiovu.com)
Last changed: $Date: 2015-01-23 20:38:50 +0100 (Fri, 23 Jan 2015) $
SOURCE CODE
Available at: r.cost source code (history)
Main index | Raster index | Topics index | Keywords index | Graphical index | Full index
© 2003-2018 GRASS Development Team, GRASS GIS 7.4.0 Reference Manual