Provided by: task-spooler_1.0-1_amd64 
NAME
ts - task spooler. A simple unix batch system
SYNOPSIS
tsp [actions] [options] [command...]
Actions: [-KClhV] [-t [id]] [-c [id]] [-p [id]] [-o [id]] [-s [id]] [-r [id]] [-w [id]] [-k [id]] [-u
[id]] [-i [id]] [-U <id-id>] [-S [num]]
Options: [-nfgmd] [-L <label>] [-D <id>]
DESCRIPTION
ts will run by default a per user unix task queue. The user can add commands to the queue, watch that
queue at any moment, and look at the task results (actually, standard output and exit error).
SIMPLE USE
Calling ts with a command will add that command to the queue, and calling it without commands or
parameters will show the task list.
COMMAND OPTIONS
When adding a job to ts, we can specify how it will be run and how will the results be collected:
-n Do not store the standard output/error in a file at $TMPDIR - let it use the file descriptors
decided by the calling process. If it is not used, the jobid for the new task will be outputed to
stdout.
-g Pass the output through gzip (only if -n ). Note that the output files will not have a .gz
extension.
-f Don not put the task into background. Wait the queue and the command run without getting detached
of the terminal. The exit code will be that of the command, and if used together with -n, no
result will be stored in the queue.
-m Mail the results of the command (output and exit code) to $TS_MAILTO , or to the $USER using
/usr/sbin/sendmail. Look at ENVIRONMENT.
-L <label>
Add a label to the task, which will appear next to its command when listing the queue. It makes
more comfortable distinguishing similar commands with different goals.
-d Run the command only if the command before finished well (errorlevel = 0). This new task enqueued
depends on the result of the previous command. If the task is not run, it is considered as failed
for further dependencies.
-D <id>
Run the command only if the job of given id finished well (errorlevel = 0). This new task enqueued
depends on the result of the previous command. If the task is not run, it is considered as failed
for further dependencies. If the server doesn't have the job id in its list, it will be
considered as if the job failed.
-B In the case the queue is full (due to TS_MAXCONN or system limits), by default ts will block the
enqueuing command. Using -B, if the queue is full it will exit returning the value 2 instead of
blocking.
-E Keep two different output files for the command stdout and stderr. stdout goes to the file
announced by ts (look at -o), and stderr goes to the stdout file with an additional ".e". For
example, /tmp/ts-out.SKsDw8 and /tmp/ts-out.SKsDw8.e. Only the stdout file gets created with
mkstemp, ensuring it does not overwrite any other; the ".e" will be overwritten if it existed.
-N <num>
Run the command only if there are num slots free in the queue. Without it, the job will run if
there is one slot free. For example, if you use the queue to feed cpu cores, and you know that a
job will take two cores, with -N you can let ts know that.
ACTIONS
Instead of giving a new command, we can use the parameters for other purposes:
-K Kill the ts server for the calling client. This will remove the unix socket and all the ts
processes related to the queue. This will not kill the command being run at that time.
It is not reliable to think that ts -K will finish when the server is really killed. By now it is
a race condition.
-C Clear the results of finished jobs from the queue.
-l Show the list of jobs - to be run, running and finished - for the current queue. This is the
default behaviour if ts is called without options.
-t [id]
Show the last ten lines of the output file of the named job, or the last running/run if not
specified. If the job is still running, it will keep on showing the additional output until the
job finishes. On exit, it returns the errorlevel of the job, as in -c.
-c [id]
Run the system's cat to the output file of the named job, or the last running/run if not
specified. It will block until all the output can be sent to standard output, and will exit with
the job errorlevel as in -c.
-p [id]
Show the pid of the named job, or the last running/run if not specified.
-o [id]
Show the output file name of the named job, or the last running/run if not specified.
-s [id]
Show the job state of the named job, or the last in the queue.
-r [id]
Remove the named job, or the last in the queue.
-w [id]
Wait for the named job, or for the last in the queue.
-k [id]
Kill the process group of the named job (SIGTERM), or the last running/run job if not specified.
Equivalent to kill -- -`ts -p`
-u [id]
Make the named job (or the last in the queue) urgent - this means that it goes forward in the
queue so it can run as soon as possible.
-i [id]
Show information about the named job (or the last run). It will show the command line, some times
related to the task, and also any information resulting from TS_ENV (Look at ENVIRONMENT).
-U <id-id>
Interchange the queue positions of the named jobs (separated by a hyphen and no spaces).
-h Show help on standard output.
-V Show the program version.
MULTI-SLOT
ts by default offers a queue where each job runs only after the previous finished. Nevertheless, you can
change the maximum number of jobs running at once with the -S [num] parameter. We call that number the
amount of slots. You can also set the initial number of jobs with the environment variable TS_SLOTS .
When increasing this setting, queued waiting jobs will be run at once until reaching the maximum set.
When decreasing this setting, no other job will be run until it can meet the amount of running jobs set.
When using an amount of slots greater than 1, the action of some commands may change a bit. For example,
-t without jobid will tail the first job running, and -d will try to set the dependency with the last job
added.
-S [num]
Set the maximum amount of running jobs at once. If you don't specify num it will return the
maximum amount of running jobs set.
ENVIRONMENT
TS_MAXFINISHED
Limit the number of job results (finished tasks) you want in the queue. Use this option if you are
tired of -C.
TS_MAXCONN
The maximum number of ts server connections to clients. This will make the ts clients block until
connections are freed. This helps, for example, on systems with a limited number of processes,
because each job waiting in the queue remains as a process. This variable has to be set at server
start, and cannot be modified later.
TS_ONFINISH
If the variable exists pointing to an executable, it will be run by the client after the queued
job. It uses execlp, so PATH is used if there are no slashes in the variable content. The
executable is run with four parameters: jobid errorlevel output_filename and command.
TMPDIR As the program output and the unix socket are thought to be stored in a temporary directory,
TMPDIR will be used if defined, or /tmp otherwise.
TS_SOCKET
Each queue has a related unix socket. You can specify the socket path with this environment
variable. This way, you can have a queue for your heavy disk operations, another for heavy use of
ram., and have a simple script/alias wrapper over ts for those special queues. If it is not
specified, it will be $TMPDIR/socket-ts.[uid].
TS_SLOTS
Set the number of slots at the start of the server, similar to -S, but the contents of the
variable are read only when running the first instance of ts.
TS_MAILTO
Send the letters with job results to the address specified in this variable. Otherwise, they are
sent to $USER or if not defined, nobody. The system /usr/sbin/sendmail is used. The job outputs
are not sent as an attachment, so understand the consequences if you use the -gm flags together.
USER As seen above, it is used for the mail destination if TS_MAILTO is not specified.
TS_SAVELIST
If it is defined when starting the queue server (probably the first ts command run), on SIGTERM
the queue status will be saved to the file pointed by this environment variable - for example, at
system shutdown.
TS_ENV This has a command to be run at enqueue time through /bin/sh. The output of the command will be
readable through the option -i. You can use a command which shows relevant environment for the
command run. For example, you may use TS_ENV='pwd;set;mount'.
FILES
/tmp/ts.error
if ts finds any internal problem, you should find an error report there. Please send this to the
author as part of the bug report.
BUGS
ts expects a simple command line. It does not start a shell parser. If you want to run complex shell
commands, you may want to run them through sh -c 'commands...' Also, remember that stdin/stdout/stderr
will be detached, so do not use your shell's redirection operators when you put a job into background.
You can use them inside the sh -c in order to set redirections to the command run.
If an internal problem is found in runtime, a file /tmp/ts.error is created, which you can submit to the
developer in order to fix the bug.
SEE ALSO
at(1)
AUTHOR
Lluis Batlle i Rossell
NOTES
This page describes ts as in version 1.0. Other versions may differ. The file TRICKS found in the
distribution package can show some ideas on special uses of ts.
The Debian version of ts is called tsp to avoid name conflict with moreutils package.