Provided by: manpages-dev_4.15-1_all 
NAME
timer_create - create a POSIX per-process timer
SYNOPSIS
#include <signal.h>
#include <time.h>
int timer_create(clockid_t clockid, struct sigevent *sevp,
timer_t *timerid);
Link with -lrt.
Feature Test Macro Requirements for glibc (see feature_test_macros(7)):
timer_create(): _POSIX_C_SOURCE >= 199309L
DESCRIPTION
timer_create() creates a new per-process interval timer. The ID of the new timer is
returned in the buffer pointed to by timerid, which must be a non-null pointer. This ID
is unique within the process, until the timer is deleted. The new timer is initially
disarmed.
The clockid argument specifies the clock that the new timer uses to measure time. It can
be specified as one of the following values:
CLOCK_REALTIME
A settable system-wide real-time clock.
CLOCK_MONOTONIC
A nonsettable monotonically increasing clock that measures time from some
unspecified point in the past that does not change after system startup.
CLOCK_PROCESS_CPUTIME_ID (since Linux 2.6.12)
A clock that measures (user and system) CPU time consumed by (all of the threads
in) the calling process.
CLOCK_THREAD_CPUTIME_ID (since Linux 2.6.12)
A clock that measures (user and system) CPU time consumed by the calling thread.
CLOCK_BOOTTIME (Since Linux 2.6.39)
Like CLOCK_MONOTONIC, this is a monotonically increasing clock. However, whereas
the CLOCK_MONOTONIC clock does not measure the time while a system is suspended,
the CLOCK_BOOTTIME clock does include the time during which the system is
suspended. This is useful for applications that need to be suspend-aware.
CLOCK_REALTIME is not suitable for such applications, since that clock is affected
by discontinuous changes to the system clock.
CLOCK_REALTIME_ALARM (since Linux 3.0)
This clock is like CLOCK_REALTIME, but will wake the system if it is suspended.
The caller must have the CAP_WAKE_ALARM capability in order to set a timer against
this clock.
CLOCK_BOOTTIME_ALARM (since Linux 3.0)
This clock is like CLOCK_BOOTTIME, but will wake the system if it is suspended.
The caller must have the CAP_WAKE_ALARM capability in order to set a timer against
this clock.
As well as the above values, clockid can be specified as the clockid returned by a call to
clock_getcpuclockid(3) or pthread_getcpuclockid(3).
The sevp argument points to a sigevent structure that specifies how the caller should be
notified when the timer expires. For the definition and general details of this
structure, see sigevent(7).
The sevp.sigev_notify field can have the following values:
SIGEV_NONE
Don't asynchronously notify when the timer expires. Progress of the timer can be
monitored using timer_gettime(2).
SIGEV_SIGNAL
Upon timer expiration, generate the signal sigev_signo for the process. See
sigevent(7) for general details. The si_code field of the siginfo_t structure will
be set to SI_TIMER. At any point in time, at most one signal is queued to the
process for a given timer; see timer_getoverrun(2) for more details.
SIGEV_THREAD
Upon timer expiration, invoke sigev_notify_function as if it were the start
function of a new thread. See sigevent(7) for details.
SIGEV_THREAD_ID (Linux-specific)
As for SIGEV_SIGNAL, but the signal is targeted at the thread whose ID is given in
sigev_notify_thread_id, which must be a thread in the same process as the caller.
The sigev_notify_thread_id field specifies a kernel thread ID, that is, the value
returned by clone(2) or gettid(2). This flag is intended only for use by threading
libraries.
Specifying sevp as NULL is equivalent to specifying a pointer to a sigevent structure in
which sigev_notify is SIGEV_SIGNAL, sigev_signo is SIGALRM, and sigev_value.sival_int is
the timer ID.
RETURN VALUE
On success, timer_create() returns 0, and the ID of the new timer is placed in *timerid.
On failure, -1 is returned, and errno is set to indicate the error.
ERRORS
EAGAIN Temporary error during kernel allocation of timer structures.
EINVAL Clock ID, sigev_notify, sigev_signo, or sigev_notify_thread_id is invalid.
ENOMEM Could not allocate memory.
VERSIONS
This system call is available since Linux 2.6.
CONFORMING TO
POSIX.1-2001, POSIX.1-2008.
NOTES
A program may create multiple interval timers using timer_create().
Timers are not inherited by the child of a fork(2), and are disarmed and deleted during an
execve(2).
The kernel preallocates a "queued real-time signal" for each timer created using
timer_create(). Consequently, the number of timers is limited by the RLIMIT_SIGPENDING
resource limit (see setrlimit(2)).
The timers created by timer_create() are commonly known as "POSIX (interval) timers". The
POSIX timers API consists of the following interfaces:
* timer_create(): Create a timer.
* timer_settime(2): Arm (start) or disarm (stop) a timer.
* timer_gettime(2): Fetch the time remaining until the next expiration of a timer, along
with the interval setting of the timer.
* timer_getoverrun(2): Return the overrun count for the last timer expiration.
* timer_delete(2): Disarm and delete a timer.
Since Linux 3.10, the /proc/[pid]/timers file can be used to list the POSIX timers for the
process with PID pid. See proc(5) for further information.
Since Linux 4.10, support for POSIX timers is a configurable option that is enabled by
default. Kernel support can be disabled via the CONFIG_POSIX_TIMERS option.
C library/kernel differences
Part of the implementation of the POSIX timers API is provided by glibc. In particular:
* Much of the functionality for SIGEV_THREAD is implemented within glibc, rather than the
kernel. (This is necessarily so, since the thread involved in handling the
notification is one that must be managed by the C library POSIX threads
implementation.) Although the notification delivered to the process is via a thread,
internally the NPTL implementation uses a sigev_notify value of SIGEV_THREAD_ID along
with a real-time signal that is reserved by the implementation (see nptl(7)).
* The implementation of the default case where evp is NULL is handled inside glibc, which
invokes the underlying system call with a suitably populated sigevent structure.
* The timer IDs presented at user level are maintained by glibc, which maps these IDs to
the timer IDs employed by the kernel.
The POSIX timers system calls first appeared in Linux 2.6. Prior to this, glibc provided
an incomplete user-space implementation (CLOCK_REALTIME timers only) using POSIX threads,
and in glibc versions before 2.17, the implementation falls back to this technique on
systems running pre-2.6 Linux kernels.
EXAMPLE
The program below takes two arguments: a sleep period in seconds, and a timer frequency in
nanoseconds. The program establishes a handler for the signal it uses for the timer,
blocks that signal, creates and arms a timer that expires with the given frequency, sleeps
for the specified number of seconds, and then unblocks the timer signal. Assuming that
the timer expired at least once while the program slept, the signal handler will be
invoked, and the handler displays some information about the timer notification. The
program terminates after one invocation of the signal handler.
In the following example run, the program sleeps for 1 second, after creating a timer that
has a frequency of 100 nanoseconds. By the time the signal is unblocked and delivered,
there have been around ten million overruns.
$ ./a.out 1 100
Establishing handler for signal 34
Blocking signal 34
timer ID is 0x804c008
Sleeping for 1 seconds
Unblocking signal 34
Caught signal 34
sival_ptr = 0xbfb174f4; *sival_ptr = 0x804c008
overrun count = 10004886
Program source
#include <stdlib.h>
#include <unistd.h>
#include <stdio.h>
#include <signal.h>
#include <time.h>
#define CLOCKID CLOCK_REALTIME
#define SIG SIGRTMIN
#define errExit(msg) do { perror(msg); exit(EXIT_FAILURE); \
} while (0)
static void
print_siginfo(siginfo_t *si)
{
timer_t *tidp;
int or;
tidp = si->si_value.sival_ptr;
printf(" sival_ptr = %p; ", si->si_value.sival_ptr);
printf(" *sival_ptr = 0x%lx\n", (long) *tidp);
or = timer_getoverrun(*tidp);
if (or == -1)
errExit("timer_getoverrun");
else
printf(" overrun count = %d\n", or);
}
static void
handler(int sig, siginfo_t *si, void *uc)
{
/* Note: calling printf() from a signal handler is not safe
(and should not be done in production programs), since
printf() is not async-signal-safe; see signal-safety(7).
Nevertheless, we use printf() here as a simple way of
showing that the handler was called. */
printf("Caught signal %d\n", sig);
print_siginfo(si);
signal(sig, SIG_IGN);
}
int
main(int argc, char *argv[])
{
timer_t timerid;
struct sigevent sev;
struct itimerspec its;
long long freq_nanosecs;
sigset_t mask;
struct sigaction sa;
if (argc != 3) {
fprintf(stderr, "Usage: %s <sleep-secs> <freq-nanosecs>\n",
argv[0]);
exit(EXIT_FAILURE);
}
/* Establish handler for timer signal */
printf("Establishing handler for signal %d\n", SIG);
sa.sa_flags = SA_SIGINFO;
sa.sa_sigaction = handler;
sigemptyset(&sa.sa_mask);
if (sigaction(SIG, &sa, NULL) == -1)
errExit("sigaction");
/* Block timer signal temporarily */
printf("Blocking signal %d\n", SIG);
sigemptyset(&mask);
sigaddset(&mask, SIG);
if (sigprocmask(SIG_SETMASK, &mask, NULL) == -1)
errExit("sigprocmask");
/* Create the timer */
sev.sigev_notify = SIGEV_SIGNAL;
sev.sigev_signo = SIG;
sev.sigev_value.sival_ptr = &timerid;
if (timer_create(CLOCKID, &sev, &timerid) == -1)
errExit("timer_create");
printf("timer ID is 0x%lx\n", (long) timerid);
/* Start the timer */
freq_nanosecs = atoll(argv[2]);
its.it_value.tv_sec = freq_nanosecs / 1000000000;
its.it_value.tv_nsec = freq_nanosecs % 1000000000;
its.it_interval.tv_sec = its.it_value.tv_sec;
its.it_interval.tv_nsec = its.it_value.tv_nsec;
if (timer_settime(timerid, 0, &its, NULL) == -1)
errExit("timer_settime");
/* Sleep for a while; meanwhile, the timer may expire
multiple times */
printf("Sleeping for %d seconds\n", atoi(argv[1]));
sleep(atoi(argv[1]));
/* Unlock the timer signal, so that timer notification
can be delivered */
printf("Unblocking signal %d\n", SIG);
if (sigprocmask(SIG_UNBLOCK, &mask, NULL) == -1)
errExit("sigprocmask");
exit(EXIT_SUCCESS);
}
SEE ALSO
clock_gettime(2), setitimer(2), timer_delete(2), timer_getoverrun(2), timer_settime(2),
timerfd_create(2), clock_getcpuclockid(3), pthread_getcpuclockid(3), pthreads(7),
sigevent(7), signal(7), time(7)
COLOPHON
This page is part of release 4.15 of the Linux man-pages project. A description of the
project, information about reporting bugs, and the latest version of this page, can be
found at https://www.kernel.org/doc/man-pages/.